Super-luminosity(AlGaInP)Leadless Chip LED GM5Y01210A series 6050 Size, 2.4mm Thickness, Leadless Chip LED GM5Y01210A series (Under development) Outline Dimensions Directive Characteristics (Unit : mm) (Ta=25C) 5.7 1 3 4 6 1 2 1.7 5 0.8 -40 -30 -20 -10 Relative luminous intensity(%) -50 o3 . 2 0.8 1.4 Recommended PWB pattern for soldering Photoresist 8.4 1 Anode Cathode +50 80 60 +60 40 +70 20 +80 +90 0 6.7 1 2.1 2 4 4 4 Absolute Maximum Ratings Model No. Emitting color Material (Ta=25C) Power dissipation Forward current Peak forward current P IF IFM*1 (mA) (mA) (mW) GM5YJ01210A Orange AlGaInP on GaAs 320 GM5YS01210A Sunset orange AlGaInP on GaAs 320 GM5YV01210A Amber AlGaInP on GaAs 320 *1 Duty ratio=1/10, Pulse width=0.1ms *2 For 3s or less at the temperature of hand soldering. 100 100 100 120 120 120 Derating factor Reverse voltage Operating temperature Storage temperature (mA/C) VR Topr Tstg (V) (C) (C) DC Pulse 1.18 1.18 1.18 1.41 1.41 1.41 5 5 5 -55 to +100 -55 to +100 -55 to +100 Electro-optical Characteristics Lens type Model No. GM5YJ01210A Colorless GM5YS01210A transparency GM5YV01210A 18 Notice Internet +40 5.8 1 3 +30 -90 2 3 3 -80 +20 6.3 3.0 Pin connections 2 -70 1.4 1.3 1 -60 2.4 0 100 +10 Forward voltage VF(V) TYP 2.3 2.3 2.3 MAX 3.2 3.2 3.2 -55 to +100 -55 to +100 -55 to +100 Soldering temperature Tsol*2 (C) 295 295 295 (IF=90mA,Ta=25C) Peak emission wavelength p(nm) TYP 627 616 592 Dominant wavelength d(nm) TYP 619 606 589 Luminous intensity IV(mcd) TYP (1500) (1700) (1300) Spectrum radiation bandwidth (nm) TYP 18 18 18 Reverse current VR IR(A) (V) MAX 100 100 100 4 4 4 Page for characteristics diagrams 64 64 64 In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://sharp-world.com/ecg/ Characteristics Diagrams GM5Y01210A series Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) Forward Current vs. Forward Voltage(Note) 240 (Ta=25C) 1000 (Ta=25C) 1000 500 160 120 100 80 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 200 100 10 100 50 10 5.0 40 0 -55 0 25 50 75 1 1.0 100 110 125 1.0 1.2 1.4 Ambient temperature Ta(C) 1.6 1.8 2.0 2.2 2.4 -50 2.6 0 Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 100 Duty Ratio vs. Peak Forward Current (Ta=25C) 1000 240 50 Ambient temperature Ta(C) Forward voltage VF(V) 140 500 120 160 120 80 200 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 200 100 50 20 10 5.0 40 1.0 0 25 50 75 1 100 110 125 80 60 40 20 2.0 0 -55 100 10 100 0 1/100 1000 1/10 Forward current IF(mA) Ambient temperature Ta(C) 1 Duty ratio DR LT1Z95A series Forward Current vs. Forward Voltage(Note) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) (Ta=25C) 100 60 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -60 -30 0 30 60 90 0.1 1.0 120 1.2 1.4 1.6 1.8 2.0 2.2 2.4 1.0 -60 2.6 Forward voltage VF(V) Ambient temperature Ta(C) Peak Forward Current Derating Curve -20 0 20 40 60 80 100 Ambient temperature Ta(C) Luminous Intensity vs. Forward Current(Note) 120 -40 Duty Ratio vs. Peak Forward Current (Ta=25C) 1000 (Ta=25C) 70 500 60 80 60 40 200 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 100 100 50 20 10 5.0 20 50 40 30 20 10 2.0 0 -60 -30 0 30 60 Ambient temperature Ta(C) 90 120 1.0 0.1 0.2 0.5 1 2 5 10 20 Forward current IF(mA) 50 100 0 1/100 1/10 1 Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) 64 Notice Internet In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://sharp-world.com/ecg/ Taping Specifications (Unit : mm) 4.0 0.2 4.0 0.2 1.5 1.2 4.0 GM135200A series GM155200A series LT167A series LT197A series 2.0 Cathode 4.0 GM140300AE series/LT140A series 4 000 pcs. /reel 6 000 pcs. /reel 5 000 pcs. /reel 4 000 pcs. /reel 5 000 pcs. /reel 1.55 0.3 4.0 4.0 0.25 5.5 2.3 0.1 2.0 Cathode 1.5 1.75 0.1 1.2 1.55 5.5 1.9 1.0 3.5 8.0 3.5 8.0 1.75 1.75 1.5 3.2 1.75 Cathode 0.1 1.9 Cathode 3.8 0.1 2.0 4.0 GM595200A series/LT1Z95A series 2 000 pcs. /reel LT190A series 3 000 pcs. / reel 1.55 8.0 2.0 Anode 4.0 2.3 4.0 2.0 6.1 1.75 0.3 5.5 3.5 8.0 5.5 3.9 yy ;; 3.5 2.9 0.2 4.0 1.5 0.1 8.0 Anode 0.1 1.5 Cathode Taping Specifications 5.5 3.0 12.0 3.5 8.0 1.6 9.2 6.4 5.65 1.75 Cathode 2.0 4.0 3.1 GM501200A series/GM5WA02200A/GM5WA06210A/ GM5WA06250A 800 pcs. / reel Notice Internet LT145A series/GM4C13300AC series 3 000 pcs. /reel In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://sharp-world.com/ecg/ 67 Taping Specifications (Unit : mm) yy; ;; y 4.0 1.5 1.75 0.25 4.0 1.5 1.75 0.2 1.9 2.0 Cathode 4.0 8.0 3.5 4.0 LT190A series 3 000 pcs. / reel 4.0 1.33 0.1 1.25 8.0 5.5 1.85 3.5 1.75 1.5 0.2 2.0 Cathode LT167A series/GM1WA80350A/GM1ZUB 80300A/GM1ZSG80300A 4 000 pcs. /reel 5.5 5.5 1.9 0.1 0.1 1.2 3.4 3.5 8.0 3.3 1.9 2 Cathode 4.0 GM481200A series 4 000 pcs. /reel 4.5 Shape and dimension of reel o60 o178 o13 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 2.0 Label 1.5 10 68 Notice Internet In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://sharp-world.com/ecg/ Taping Specifications Lead type Chip LED (Unit : mm) 9.4 4.7 8.2 3252 3.7 Sleave 1 Pin mark Stopper (without guard) 1 Pin mark of the product is stopper (without guard) side. Stopper (with guard) Taping Specifications GM503200Z series/GM5WA06200Z/GM5WA06250Z 1 000 pcs. (50 pcs./sleeve x 20) Notice Internet In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet address for Electronic Components Group http://sharp-world.com/ecg/ 69 NOTICE The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reser ves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices. This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in par t, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. Contact and consult with a SHARP representative if there are any questions about the contents of this publication. 72