F5CH-856M50-L2DM - Fujitsu Quantum Devices Limited

Fujitsu Microelectronics, Inc.

F4CC/F4CD (T1) DMS Series (IF SAW Filters)

The F4 Series filters are Double Mode SAW (DMS) filters fabri-

cated on quartz substrates for the 200 to 400 MHz range. •TA = -30 to 85°C

•Balanced Input/Output

F5CM (B2) DMS Series

The F5CM series filters are designed for RF interstage applica-

tions featuring balanced/unbalanced I/O ports. •TA = -30 to 85°C

•PIN = 10 mW

The F5CE (D2) DMS filters have high stop band attenuation and

excellent pass band flatness. •TA = -30 to 85°C

•PIN = 10 mW

•50-Ohm Input/Output

F5CE (D2) DMS Series

Part Number Application Center Frequency

(MHz) Bandwidth

(kHz) Insertion Loss

(dB) Package

(mm) Description

F4CC-246M00-T101 GSM/DCS1800 246 160 5.9 7.0 x 5.0 x 1.6 Balanced Input/Output

F4CD-400M00-T102 GSM/DCS1800 400 200 4.5 5.0 x 5.0 x 1.5 Balanced Input/Output

Part Number Application Frequency Band

(MHz) Insertion Loss

(dB) Package

(mm)

Description

Input Output

F5CM-902M50-B263 GSM (Tx) 890 to 915 3.2 3.0 x 3.0 x 1.2 50¾ Balanced 50¾ Unbalanced

F5CM-902M50-B264 GSM (Tx) 890 to 915 3.0 3.0 x 3.0 x 1.2 100¾ Balanced 50¾ Unbalanced

F5CM-902M50-B265 GSM (Tx) 890 to 915 3.6 3.0 x 3.0 x 1.2 150¾ Balanced 50¾ Unbalanced

F5CM-947M50-B260 GSM (Rx) 935 to 960 3.0 3.0 x 3.0 x 1.2 50¾ Unbalanced 50¾ Balanced

F5CM-947M50-B261 GSM (Rx) 935 to 960 2.8 3.0 x 3.0 x 1.2 50¾ Unbalanced 100¾ Balanced

F5CM-947M50-B262 GSM (Rx) 935 to 960 3.3 3.0 x 3.0 x 1.2 50¾ Unbalanced 150¾ Balanced

F5CM-836M50-B268 Amps/CDMA (Tx) 824 to 849 2.8 3.0 x 3.0 x 1.2 50¾ Balanced 50¾ Unbalanced

F5CM-881M50-B266 Amps/CDMA (Rx) 869 to 894 2.8 3.0 x 3.0 x 1.2 50¾ Unbalanced 50¾ Balanced

Part Number Application Frequency Band

(MHz) Insertion Loss

(dB) Package

(mm)

F5CE-950M00-D230 PDC (Tx) 940 to 960 2.6 3.0 x 3.0 x 1.2

F5CE-820M00-D231 PDC (Rx) 810 to 830 2.5 3.0 x 3.0 x 1.2

F5CE-836M50-D232 AMPS (Tx) 824 to 849 2.7 3.0 x 3.0 x 1.2

F5CE-881M50-D233 AMPS (Rx) 869 to 894 2.7 3.0 x 3.0 x 1.2

F5CE-902M50-D234 GSM (Tx) 890 to 915 2.8 3.0 x 3.0 x 1.2

F5CE-947M50-D235 GSM (Rx) 935 to 960 2.7 3.0 x 3.0 x 1.2

F5CE-915M00-D238 ISM 900 (Tx) 911.5 to 918.5 3.2 3.0 x 3.0 x 1.2

Fujitsu Microelectronics, Inc.

F5CH (L2) Series (Ladder SAW Filters)

The F5CH family of LiTaO3 SAW bandpass filters have been

designed for RF filter applications in the 700 to 1000MHz

frequency range.

•TA = -30 to 85°C

•PIN = 200 mW

F5CJ (L2) Series (Ladder SAW Filters)

The F5CJ ladder SAW filters are in a 3.8 x 3.8 x 1.5 mm package

with a round cap. These SAW filters are fabricated with LiTaO3

and operate from 700 to 1000 MHz.

•TA = -3 to 85°C

•PIN = 200 mW

Part Number Application Frequency Band

(MHz) Insertion Loss

(dB) Package

(mm) Comments

F5CH-836M50-L2AL AMPS/CDMA (Tx) 824 to 849 1.6 3.8 x 3.8 x 1.5

F5CH-836M50-L2AW AMPS/CDMA (Tx) 824 to 849 2.6 3.8 x 3.8 x 1.5 High Rejection

F5CH-881M50-L2AM AMPS/CDMA (Rx) 869 to 894 2.5 3.8 x 3.8 x 1.5

F5CH-881M50-L2AV AMPS/CDMA (Rx) 869 to 894 3.0 3.8 x 3.8 x 1.5 High Rejection

F5CH-888M50-L2CL ETACS (Tx) 872 to 905 3.0 3.8 x 3.8 x 1.5

F5CH-888M50-L2CW ETACS (Tx) 872 to 905 3.8 3.8 x 3.8 x 1.5 High Rejection

F5CH-933M50-L2CM ETACS (Rx) 917 to 950 3.8 3.8 x 3.8 x 1.5

F5CH-911M50-L2DL NTACS (Tx) 898 to 925 2.6 3.8 x 3.8 x 1.5

F5CH-856M50-L2DM NTACS (Rx) 843 to 870 2.5 3.8 x 3.8 x 1.5

F5CH-902M50-L2EL GSM (Tx) 890 to 915 1.8 3.8 x 3.8 x 1.5

F5CH-902M50-L2EW GSM (Tx) 890 to 915 2.9 3.8 x 3.8 x 1.5 High Rejection

F5CH-947M50-L2EM GSM (Rx) 935 to 960 2.5 3.8 x 3.8 x 1.5

F5CH-947M50-L2EV GSM (Rx) 935 to 960 2.8 3.8 x 3.8 x 1.5 High Rejection

F5CH-897M50-L2KL EGSM (Tx) 880 to 915 2.4 3.8 x 3.8 x 1.5

F5CH-942M50-L2KM EGSM (Rx) 925 to 960 3.2 3.8 x 3.8 x 1.5

F5CH-942M50-L2KV EGSM (Rx) 925 to 960 3.0 3.8 x 3.8 x 1.5 High Rejection

F5CH-950M00-L2FW PDC800 (Tx) 940 to 960 2.8 3.8 x 3.8 x 1.5 High Rejection

F5CH-820M00-L2FM PDC800 (Rx) 810 to 830 1.8 3.8 x 3.8 x 1.5

F5CH-820M00-L2FV PDC800 (Rx) 810 to 830 3.0 3.8 x 3.8 x 1.5 High Rejection

F5CH-940M50-L2MD Dual-PDC800 (Tx) 925 to 958 2.7 3.8 x 3.8 x 1.5 High Rejection

F5CH-915M00-L2JW ISM900 902 to 928 3.0 3.8 x 3.8 x 1.5 High Rejection

Part Number Application Frequency Band

(MHz) Insertion Loss

(dB) Package

(mm)

F5CJ-881M50-L212 AMP/ACD/CDMA (Rx) 869 to 894 1.0 3.8 x 3.8 x 1.5

F5CJ-947M50-L213 GSM/NMT (Tx) 935 to 960 1.8 3.8 x 3.8 x 1.5

F5CJ-935M00-L201 2-Way Pager 929 to 941 2.4 3.8 x 3.8 x 1.5

Fujitsu Microelectronics, Inc.

F5CE/F6CE (K2) Series (Ladder SAW Filters)

The F5/F6CE (K2) series of LiTaO3 ladder SAW filters are used for

interstage RF filter applications in the 700 to 1700 MHz range. •TA = -30 to 85°C

•PIN = 200 mW

•50-Ohm Input/Output

Part Number Application Frequency Band

(MHz) Insertion Loss

(dB) Package

(mm) Comments

F5CE-836M50-K205 AMPS (Tx) 824 to 849 2.7 3.0 x 3.0 x 1.2

F5CE-836M50-K225 AMPS (Tx) 824 to 849 2.0 3.0 x 3.0 x 1.2

F5CE-881M50-K206 AMPS (Rx) 869 to 894 2.0 3.0 x 3.0 x 1.2

F5CE-881M50-K210 AMPS (Rx) 869 to 894 2.7 3.0 x 3.0 x 1.2 High Rejection

F5CE-897M50-K226 EGSM (Tx) 880 to 915 2.5 3.0 x 3.0 x 1.2

F5CE-942M50-K216 EGSM (Rx) 925 to 960 2.5 3.0 x 3.0 x 1.2

F5CE-950M00-K201 PDC800 (Tx) 940 to 960 3.0 3.0 x 3.0 x 1.2

F5CE-820M00-K202 PDC800 (Rx) 810 to 830 2.1 3.0 x 3.0 x 1.2

F5CE-820M00-K204 PDC800 (Rx) 810 to 830 3.0 3.0 x 3.0 x 1.2 High Rejection

F5CE-906M00-K211 JCDMA (Tx) 887 to 925 2.5 3.0 x 3.0 x 1.2

F5CE-906M00-K215 JCDMA (Tx) 887 to 925 3.0 3.0 x 3.0 x 1.2 High Rejection

F5CE-851M00-K212 JCDMA (Rx) 832 to 870 2.5 3.0 x 3.0 x 1.2

F6CE-1G4410-K220 PDC 1.5G (Tx) 1429 to 1453 2.2 3.0 x 3.0 x 1.2

F6CE-1G4890-K221 PDC 1.5G (Rx) 1477 to 1501 2.5 3.0 x 3.0 x 1.2

F6CE-1G6190-K222 PDC 1.5G (Lo) 1607 to 1631 2.4 3.0 x 3.0 x 1.2

Fujitsu Microelectronics, Inc.

F6CE (L2) Series (Ladder SAW Filters)

The F6CE series of LiTaO3 ladder SAW bandpass filters have been

designed for applications in the 1000 to 2500 MHz range and offer

superior RF stability over a wide range of operating temperatures.

•TA = -30 to 85°C

•Low Insertion Loss

•50-Ohm Input/Output

F5CG (A2) Series (Antenna Filter)

This LiTaO3 Ladder SAW antenna filter is used to protect the

receiver from the transmitter. •TA = -30 to 85 °C

•Small Size, Lightweight

Part Number Application Frequency Band

(MHz) Insertion Loss

(dB) Pin

(mW) Package

(mm) Comments

F6CE-1G5754-L2UA GPS 1574.42 to 1776.42 2.7 10 3.0 x 3.0 x 1.2

F6CE-1G7475-L2YA PCN (Tx) 1710 to 1785 3.0 20 3.0 x 3.0 x 1.2

F6CE-1G8425-L2YB PCN (Rx) 1805 to 1880 3.3 20 3.0 x 3.0 x 1.2

F6CE-1G8800-L2XA US-PCS (Tx) 1850 to 1910 3.2 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-1G8800-L2XZ US-PCS (Tx) 1850 to 1910 3.7 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-1G8800-L2XJ US-PCS (Tx) 1850 to 1910 2.7 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-1G9600-L2XB US-PCS (Rx) 1930 to 1990 3.3 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-1G9600-L2XK US-PCS (Rx) 1930 to 1990 3.2 20 3.0 x 3.0 x 1.2

F6CE-1G9600-L2XY US-PCS (Rx) 1930 to 1990 3.5 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-1G7300-L2TC Korea-PCS (Tx) 1710 to 1750 2.2 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-1G7475-L2YAC Korea-PCS (Tx) 1720 to 1780 2.5 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-1G7650-L2TA Korea-PCS (Tx) 1750 to 1780 2.2 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-1G8200-L2TD Korea-PCS (Rx) 1800 to 1840 2.2 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-1G8425-L2YBC Korea-PCS (Rx) 1810 to 1870 3.0 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-1G8550-L2TB Korea-PCS (Rx) 1840 to 1870 2.2 20 3.0 x 3.0 x 1.2 High Rejection

F6CE-2G4500-L2WA Wireless LAN 2400 to 2497 4.0 10 3.0 x 3.0 x 1.2

F6CE-2G4840-L2WC Wireless LAN 2471 to 2497 2.5 10 3.0 x 3.0 x 1.2

F6CE-2G4418-L2WD Wireless LAN 2400 to 2483.5 3.2 10 3.0 x 3.0 x 1.2

F6CE-1G9500-L2ZP W-CDMA (Tx) 1920 to 1980 3.2 20 3.0 x 3.0 x 1.2

F6CE-2G1400-L2ZQ W-CDMA (Rx) 2110 to 2170 3.2 20 3.0 x 3.0 x 1.2

Part Number Application Frequency Band

(MHz) Insertion Loss

(dB) Package

(mm) Comments

F5CG-856M50-A2D4 NTACS (Rx) 843 to 870 3.1 5.0 x 5.0 x 1.5 Pin= 1 Watt

F5CG-881M50-A2A4 AMPS (Rx) 869 to 894 3.4 5.0 x 5.0 x 1.5 Pin= 1 Watt

Fujitsu Microelectronics, Inc.

D5CC (D1) Series (Antenna Duplexer)

The D5CC series of LiTaO3 ladder SAW antenna duplexers are in

the frequency range of 700 to 1000 MHz. The D5CC series has a

transmitter filter, receiver filter and matching circuit, all housed in

a small package.

•TA = -30 to 85 °C

•High Power, 1.2W max

•50-Ohm Impedance

G5CH/G5CN/G6CH (L2/D2) Series (Dual SAW Filters)

This series of dual SAW filters make it possible to shrink the size

of portable wireless communications equipment by offering dual

filters with internal matching in a single package.

Part Number Application Frequency Band

(MHz) Insertion Loss

(dB) Isolation

(dB) Package

(mm)

D5CC-881M50-D1A2 AMPS (Tx)

AMPS (Rx) 824 to 849

869 to 894 2.3

3.0 43

50 9.5 x 7.5 x 2.2

D5CC-881M50-D1A4 AMPS (Tx)

AMPS (Rx) 824 to 849

869 to 894 2.0

3.8 52

49 9.5 x 7.5 x 2.2

Part Number Application BPF

Filter No. Frequency Band

(MHz) Insertion Loss

(dB) Internal

Connection Package

(mm) Comment

G5CN-942M50-D291 PDC800 (Tx) 1

2893 to 848

925 to 960 2.8

2.8 2 in / 2 out 3.0 x 3.0 x 1.2

G5CN-877M50-D292 PDC800 (Rx) 1

2810 to 843

870 to 885 2.7

2.8 1 in / 2 out 3.0 x 3.0 x 1.2 High Rejection

G5CH-865M00-L212 J-CDMA (Rx) 1

2832 to 846

860 to 870 2.5

2.5 2 in / 2 out 3.8 x 3.8 x 1.5

G6CH-1G8800-L214 AMPS + PCS (Tx) 1

2824 to 849

1850 to 1910 2.9

3.0 2 in / 2 out 3.8 x 3.8 x 1.5

G6CH-1G9600-L215 AMPS + PCS (Rx) 1

2869 to 894

1930 to 1990 3.3

2.8 2 in / 2 out 3.8 x 3.8 x 1.5

G6CH-1G7475-L216 GSM + PCN (Tx) 1

2890 to 915

1710 to 1785 3.4

3.3 2 in / 2 out 3.8 x 3.8 x 1.5

G6CH-1G8425-L217 GSM + PCN (Rx) 1

2935 to 960

1805 to 1880 3.3

2.8 2 in / 2 out 3.8 x 3.8 x 1.5

G6CH-1G8425-L224 EGSM + PCN (Rx) 1

2925 to 960

1805 to 1880 2.7

2.7 2 in / 2 out 3.8 x 3.8 x 1.5