Model 832M1 Accelerometer Triaxial Piezoelectric Accelerometer <22A Current Consumption Wide Bandwidth to 6kHz Circuit Board Mountable The Model 832M1 is a low cost, board mountable triaxial accelerometer. Featuring stable piezo-ceramic crystals, the accelerometer incorporates full power and signal conditioning with a maximum current consumption of 22 micro-amps. The model 832M1 is available in 25g to 500g ranges and provides a flat frequency response up to greater than 6kHz. The standard model 832 offers the same envelope with a lower maximum current consumption of 4 micro-amps. dimensions FEATURES 25g to 500g Dynamic Range Low Cost Triaxial Hermetically Sealed Piezo-ceramic Crystals -40 to +125C Operating Range Single Axis Configurations Available APPLICATIONS Asset Monitoring Data Loggers Impact Monitoring Machine Health Monitoring System Wake-Up Switch Embedded Applications Model 832M1 Rev F 32 Journey Ste. 150 Aliso Viejo, CA 92656 www.meas-spec.com 949-716-5377 08/05/2013 t&m@meas-spec.com Model 832M1 Accelerometer performance specifications All values are typical at +24C, 100Hz and 3.3Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these specifications without notice. Standard product parameters are described in PSC-1001 for Embedded AC Accelerometers. Parameters DYNAMIC Range (g) Sensitivity (mV/g) Frequency Response (Hz) Natural Frequency (Hz) Non-Linearity (%FSO) Transverse Sensitivity (%) Shock Limit (g) 25 50.0 2-6000 >10000 2 <10 5000 ELECTRICAL Bias Voltage (Vdc) Total Supply Current (A) 1 Excitation Voltage (Vdc) 3 Output Impedance () Insulation Resistance (M) Broadband Noise (V) Spectral Noise (g/Hz) Spectral Noise (g/Hz) Spectral Noise (g/Hz) Warm-Up Time (msec) Shielding Ground Isolation Exc Voltage / 2 Exc Voltage / 2 <22 <22 3.3 to 5.5 3.3 to 5.5 <100 <100 >100 >100 110 90 120 160 40 40 20 16 30 100% Isolated from Mounting Surface ENVIRONMENTAL Temperature Response (%) Operating Temperature (C) Storage Temperature (C) -20/+30 from -40C to +125C -40 to +125 -40 to +125 PHYSICAL Sensing Element Case Material Weight (grams) Ceramic (shear mode) Ceramic Base, Nickel Silver Cover 3.0 1 2 3 Notes 50 25.0 2-6000 >10000 2 <10 5000 100 12.5 2-6000 >10000 2 <10 5000 200 6.25 2-6000 >10000 2 <10 5000 500 2.5 2-6000 >10000 2 <10 5000 Exc Voltage / 2 <22 3.3 to 5.5 <100 >100 50 160 40 16 Exc Voltage / 2 <22 3.3 to 5.5 <100 >100 40 160 40 16 Exc Voltage / 2 <22 3.3 to 5.5 <100 >100 50 600 160 80 30% 2dB @100Vdc 2Hz-10kHz @ 10Hz @ 100Hz @ 1000Hz A lower current consumption of 4 micro-amps is available on model 832. The model 832M1 is not to be reflow soldered at high temperature, manual soldering is recommended. See application note. The model 832M1 can be operated with 2.8V excitation but the full-scale range will be limited. Calibration supplied: CS-SENS-0100 NIST Traceable Amplitude Calibration at 100Hz The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. ordering info PART NUMBERING Model Number+Range 832M1-GGGG l l_____ Range (0200 is 200g) Example: 832M1-0200 Model 832M1, 200g Model 832M1 Rev F 32 Journey Ste. 150 Aliso Viejo, CA 92656 www.meas-spec.com 949-716-5377 08/05/2013 t&m@meas-spec.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 832M1-0100 832M1-0025 832M1-0500