Solid State Relay OCMOS FET PS7160-1A,PS7160L-1A 6-PIN DIP, 600 V BREAK DOWN VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7160-1A and PS7160L-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7160L-1A has a surface mount type lead. FEATURES * 1 channel type (1 a output) * Low LED operating current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (6-pin DIP) * Low offset voltage * PS7160L-1A: Surface mount type * UL approved: File No. E72422 (S) * BSI approved: No. 8245/8246 * CSA approved: No. CA 101391 APPLICATIONS * Exchange equipment * Measurement equipment * FA/OA equipment Document No. PN10289EJ01V1DS (1st edition) (Previous No. P11561EJ7V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS7160-1A,PS7160L-1A PACKAGE DIMENSIONS (in millimeters) PS7160-1A 9.250.5 TOP VIEW 6 5 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 7.62 3.50.3 3.30.3 4.150.3 6.50.5 0.50.1 1.340.1 0.25 M 0 to 15 2.54 PS7160L-1A 9.250.5 TOP VIEW 6 5 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 3.50.3 0.10+0.10 -0.05 6.50.5 1.340.1 0.25 M 2 0.90.25 2.54 9.600.4 Data Sheet PN10289EJ01V1DS PS7160-1A,PS7160L-1A ORDERING INFORMATION (Solder Contains Lead) Part Number PS7160-1A Package 6-pin DIP Packing Style Magazine case 50 pcs PS7160L-1A Application Part Number *1 PS7160-1A PS7160L-1A PS7160L-1A-E3 Embossed Tape 1 000 pcs/reel PS7160L-1A-E4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS7160-1A-A Package 6-pin DIP Packing Style Magazine case 50 pcs PS7160L-1A-A PS7160L-1A-E3-A Application Part Number *1 PS7160-1A PS7160L-1A Embossed Tape 1 000 pcs/reel PS7160L-1A-E4-A *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10289EJ01V1DS 3 PS7160-1A,PS7160L-1A ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Diode Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V PD 50 mW IFP 1 A VL 600 V IL 90 (120) mA Power Dissipation Peak Forward Current MOS FET *1 Break Down Voltage Continuous Load Current Connection A *2 Pulse Load Current Connection B 130 (160) Connection C 200 (210) *3 ILP 250 mA PD 560 mW BV 1 500 Vr.m.s. Total Power Dissipation PT 610 mW Operating Ambient Temperature TA -40 to +85 C Storage Temperature Tstg -40 to +100 C (AC/DC Connection) Power Dissipation Isolation Voltage *4 *1 PW = 100 s, Duty Cycle = 1 % *2 Conditions: IF 2 mA. Conditions: IF 5 mA. Load current ( ) value is. The following types of load connections are available. Connection A Connection B Connection C 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 IL IL VL (AC/DC) L L + VL (DC) - 4 6 5 4 6 5 IL 4 IL IL L L IL + I L - + VL (DC) + VL (DC) - *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output 4 Data Sheet PN10289EJ01V1DS PS7160-1A,PS7160L-1A RECOMMENDED OPERATING CONDITIONS (TA = 25 C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode MOS FET Symbol Conditions MIN. TYP. MAX. Unit 1.2 1.4 V 5.0 A 1.0 A Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Off-state Leakage ILoff VD = 600 V 0.03 Output Capacitance Cout VD = 0 V, f = 1 MHz 110 LED On-state Current IFon IL = 90 mA On-state Resistance Ron1 IF = 10 mA, IL = 10 mA Current Coupled pF 2.0 mA 42 50 Ron2 IF = 10 mA, IL = 90 mA, t 10 ms 33 50 Turn-on Time *1 ton IF = 10 mA, VO = 5 V, RL = 1.5 k, 0.8 1.5 Turn-off Time *1 toff PW 10 ms 0.06 0.2 Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 10 ms 9 1.1 pF *1 Test Circuit for Switching Time IF Pulse Input VL 50 % Input 0 VO = 5 V Input monitor 90 % VO monitor Output Rin RL 10 % ton Data Sheet PN10289EJ01V1DS toff 5 PS7160-1A,PS7160L-1A TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) MAXIMUM LORD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 150 Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 100 80 60 40 20 0 -25 0 25 7585 50 100 75 50 25 0 -25 100 0 25 Ambient Temperature TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE Output Capacitance Cout (pF) 1.4 f = 1 MHz 1.2 1.0 0 25 50 75 100 200 150 100 50 0 20 40 60 80 100 120 Ambient Temperature TA (C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LORD CURRENT vs. LORD VOLTAGE 10-3 150 IF = 10 mA 10 -4 100 TA = 85 C Load Current IL (mA) Off-state Leakage Current ILoff (A) 100 250 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 0.8 -25 10-5 10-6 10 -7 25 C 50 -4.0 10-8 10-9 0 -2.0 0 -50 -100 100 200 300 400 500 600 -150 Load Voltage VL (V) Applied Voltage VD (V) 6 7585 50 Ambient Temperature TA (C) 1.6 Forward Voltage VF (V) 125 Data Sheet PN10289EJ01V1DS 2.0 4.0 PS7160-1A,PS7160L-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 30 Normalized to 1.0 at TA = 25 C, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 -25 n = 50 pcs, IF = 10 mA, IL = 10 mA 25 Number (pcs) Normalized On-state Resistance Ron 3.0 20 15 10 5 0 25 50 0 100 75 41 42 43 Ambient Temperature TA (C) On-state Resistance Ron () TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 8.0 0.5 VO = 5 V 6.0 Turn-off Time toff (ms) Turn-on Time ton (ms) VO = 5 V 4.0 2.0 0 10 20 30 40 0.4 0.3 0.2 0.1 0 Forward Current IF (mA) 30 40 TURN-OFF TIME DISTRIBUTION TURN-ON TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 20 15 10 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) Number (pcs) 20 Forward Current IF (mA) 30 20 15 10 5 5 0 10 0.6 0.7 0.8 0.9 1.0 0 Turn-on Time ton (ms) 0.04 0.08 Turn-off Time toff (ms) Data Sheet PN10289EJ01V1DS 7 PS7160-1A,PS7160L-1A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100 Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 Ambient Temperature TA (C) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. 8 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V Data Sheet PN10289EJ01V1DS 100 PS7160-1A,PS7160L-1A TAPING SPECIFICATIONS (in millimeters) 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 10.40.1 1.550.1 12.00.1 0.3 Tape Direction PS7160L-1A-E3 PS7160L-1A-E4 Outline and Dimensions (Reel) 2.00.5 R 1.0 21.00.8 1001.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 1 000 pcs/reel Data Sheet PN10289EJ01V1DS 15.9 to 19.4 Outer edge of flange 9 PS7160-1A,PS7160L-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10289EJ01V1DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.