0.36" Single Digit Numeric LED Displays LTS-360 Series Features 0.36 inch (9.14mm) digit height Continuous uniform segments. Choices of six bright colors-AlGaAs red/bright red/green/yellow/red orange/high efficiency red. Low power requirement. Excellent characters appearance. High brightness. Wide viewing angle. Solid state reliability. Categorized for luminous intensity. I.C. compatiable. Easy mounting on P.C. board. Descriptions The LTS-360 series are 0.36 inch (9.14mm) height single digit displays. AlGaAs red desplays has gray face and white segments. Bright red and hight efficieny red displays have red face and red segments. Green, yellow AlGaAs red and red orange displays have gray face and white segments. The AlGaAs red seven segment displys are designed for applications requiring low power consumption. They are tested and selected for their excellent low current characteristics to ensure that the segments are matched at low current. Drive current as low as 1 mA per segment is available. The AlGaAs red series devices utilize LED chips which are made from AlGaAs on a non-transparent GaAs substrate. The bright red and green series devices utilize LED chips which are made from GaP on a transparent GaPsubstrate. The yellow and red orange series devices utilize LED chips which are made from GaAsP on a transparent GaP substrate. Package Dimensions A.LTS-360/367 B.LTS-368 Notes:All dimensions are in millimeters (inches). Tolerance: 0.25mm (0.01") unless otherwise noted. 9-128 14-360.p65 Page 128 2000/7/11, UE 06:43 Adobe PageMaker 6.5C/Win Devices Part No. LTSRed Green Yellow Orange AlGaAs Red Bright Red 360WC 360P 360G 360Y 360E 360HR 367WC 367P 367G 367Y 367E 367HR 368WC 368P 368G 368Y 368E 368HR Description Hi.-EFF. Red Package Dimension Internal Circuit Diagram A A A B B C Common Anode, Rt. Hand Decimal Common Cathode, Rt. Hand Decimal Common Cathode, 1 Overflow A.LTS-360 Connection B.LTS-367 C.LTS-368 Common Anode *1 Cathode F Cathode G Cathode E Cathode D Common Anode *1 Cathode D.P. Cathode C Cathode B Cathode A Common Cathode *1 Anode F Anode G Anode E Anode D Common Cathode *1 Anode D.P. Anode C Anode B Anode A Cathode Pl. & Mi. *2 Anode Plus Sign Anode Minus Sign Cathode Pl. & Mi. *2 No Pin Cathode B, C & D.P. *3 Anode D.P. Anode C Anode B Cathode B, C & D.P. *3 Pin No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Note:1.Pin 1 & 6 are internally connected. 2.Pin 1 & 4 are internally connected. DISPLAYS Pin Connection 3.Pin 6 & 10 are internally connected. Internal Circuit Diagrams A.LTS-360 B.LTS-367 C.LTS-368 Absolute Maximum Rating at Ta=25 Parameter Power Dissipation Per Segment Peak Forward Current Per Segment (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current Per Segment Derating Linear from 25 Per Segment Reverse Voltage Per Segment AlGaAs Red Bright Red Red Green Yellow Orange Hi. -Eff. Red Unit 75 40 75 60 75 75 mW 125 60 100 80 100 100 mA 30 0.4 5 15 0.2 5 25 0.33 5 25 0.33 5 mA mA/ V Operating Temperature Range 20 25 0.27 0.33 5 5 -35 to +85 Stroage Temperature Range -35 to +85 Solder Temperature 1/16 Inch Below Seating Plane for 3 Seconds at 260 9-129 Electrical/Optical Characteristics at Ta=25 LTS-360WC/367WC/368WC Parameter Symbol Min. 200 Average Luminous Intensity IV Spectral Line Half-Width d Dominant Wavelength Max. Unit 650 IF=5mA 660 nm IF=20mA 35 nm IF=20mA 638 nm IF=20mA V IF=5mA 1.6 1.7 IF=1mA 2.4 Forward Voltage, Per Segment VF Reverse Current, Per Segment IR 100 I V-m 2:1 1.8 Luminous Intensity Matching Ratio Tset Condition IF=1mA cd 3400 P Peak Emission Wavelength Typ. IF=20mA A VR=5V IF=1mA LTS-360P Parameter Average Luminous Intensity Symbol Min. Typ. IV 320 750 P Peak Emission Wavelength Spectral Line Half-Width d Dominant Wavelength Max. cd Tset Condition IF=10mA 697 nm IF=20mA 90 nm IF=20mA 657 nm IF=20mA V IF=20mA Forward Voltage, Per Segment or D.P. VF Reverse Current, Per Segment or D.P. IR 100 I V-m 2:1 Luminous Intensity Matching Ratio Unit 2.1 2.6 A VR=5V IF=10mA LTS-360G Parameter Average Luminous Intensity Symbol Min. Typ. IV 800 2000 P Peak Emission Wavelength Spectral Line Half-Width d Dominant Wavelength Max. cd Tset Condition IF=10mA 565 nm IF=20mA 30 nm IF=20mA 569 nm IF=20mA V IF=20mA Forward Voltage, Per Segment or D.P. VF Reverse Current, Per Segment or D.P. IR 100 I V-m 2:1 Luminous Intensity Matching Ratio Unit 2.1 2.6 A VR=5V IF=10mA LTS-360Y Parameter Average Luminous Intensity Peak Emission Wavelength Symbol Min. Typ. IV 800 2000 cd Tset Condition IF=10mA 585 nm IF=20mA 35 nm IF=20mA d 588 nm IF=20mA V IF=20mA Forward Voltage, Per Segment or D.P. VF Reverse Current, Per Segment or D.P. IR 100 I V -m 2:1 Luminous Intensity Matching Ratio Unit P Spectral Line Half-Width Dominant Wavelength Max. 2.1 2.6 A VR=5V IF=10mA LTS-360E Parameter Average Luminous Intensity Symbol Min. Typ. IV 800 2000 P Peak Emission Wavelength Spectral Line Half-Width d Dominant Wavelength 9-130 Max. cd IF=20mA 40 nm IF=20mA 621 nm IF=20mA V IF=20mA Reverse Current, Per Segment or D.P. IR 100 I V-m 2:1 Page 130 IF=10mA nm VF 14-360.p65 Tset Condition 630 Forward Voltage, Per Segment or D.P. Luminous Intensity Matching Ratio Unit 2.0 2.6 A VR=5V IF=10mA 2000/7/11, UE 06:43 Adobe PageMaker 6.5C/Win LTS-360HR Parameter Average Luminous Intensity Symbol Min. Typ. IV 800 2000 P Peak Emission Wavelength Spectral Line Half-Width d Dominant Wavelength Max. cd Tset Condition IF=10mA 635 nm IF=20mA 40 nm IF=20mA 623 nm IF=20mA V IF=20mA Forward Voltage, Per Segment or D.P. VF Reverse Current, Per Segment or D.P. IR 100 I V-m 2:1 Luminous Intensity Matching Ratio Unit 2.1 2.6 A VR=5V IF=10mA DISPLAYS Note: Luminous intensity is measured with a light sensor and filter combiuation that approximates the CIE (Commision Internationale De L'Eclairage) eye-response curve. Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) 9-131 14-360.p65 Page 131 2000/7/11, UE 06:44 Adobe PageMaker 6.5C/Win