101E28W256JJ4C - Advanced Monolythic Ceramics

www.amccaps.com

Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 • (716) 372-5225 • Fax (716) 372-5467

.250" MIN

.100" MAX

.025" MIN .100" TYP

.055" ± .010

.020" ± .002

.010" ± .002

.050" min

.070" ± .010

.050" min

J-LeadStraight Lead L-Lead

MECHANICAL CHARACTERISTICS

SWITCH-MODE CERAMIC CAPACITORS

HOW TO ORDER

VOLTAGE

Standard Voltages:

500 = 50 V

101 = 100 V

201 = 200 V

501 = 500 V

CASE SIZE

See Chart DIELECTRIC

N = NPO

B = BX

W = X7R

CAPACITANCE

1st two digits are

significant; third digit

denotes number of

zeros.

101 = 100 pF

102 = 1000 pF

103 = 0.01 µF

105 = 1.00 µF

TOLERANCE

J = ± 5%

K = ± 10%

L = ± 15%

M = ± 20%

N = ± 30%

Z = +80% -20%

P = +100% -0%

LEAD STYLE

J = “J” Leads

(formed in)

K = “J” Leads with

reduced height of

.045” +/- .010”

L = “L” Leads

(formed out)

M = “L” Leads with

reduced height of

.045” +/- .010”

N = Straight Lead

MARKING

3 = Specified

4 = Standard

Marking

SPECIAL CODE

C = Standard Par t

H = Group A Tested

Part number written: 201P03W275KJ4H

201 P03 275 K J 4 H

KEY FEATURES

• P-Series Approved to DSCC Drawings 87106 & 88011

MIL-PRF-49470

• E-Series Common European Lead Styles available to

MIL-PRF-49470 requirements.

• NPO & X7R Dielectrics, 50 to 500 VDC Ratings

• Low ESR / Low ESL, Ideal for SMPS Filtering Applications

• Custom Sizes, Voltages, and Values Available

Switch-Mode ceramic capacitors feature lar ge capacitance

values and exhibit low ESR (equivalent series resistance)

and low ESL (equivalent series inductance) making them

well suited for high power and high frequency applications

where tantalum or aluminum electrolytic capacitors may

not be suitable. AMC offers two series of these devices.

The P-Series feature mechanical and pin-out configurations

per DSCC 87106 and 88011 drawings while the E-Series

feature mechanical and pin-out configurations more

common in European design applications.

Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 • (716) 372-5225 • Fax (716) 372-5467

www.amccaps.com

0.001

0.01

0.1

0.001 0.01 0.1 1 1

Impedance (ohms)

Frequency (MHz)

10 μF

270 μF

0.0001

0.001

0.01

0.1

0.001 0.01 0.1 1 1

ESR (ohms)

Fre

uenc

(

MHz

)

10 μF

270 μF

ESR VS FREQUENCY (TYPICAL)

IMPEDANCE VS FREQUENCY (TYPICAL)

The left-hand portion of the curves represents the

capacitive reactance of two typical values. The

impedance decreases until series resonance is reached.

At this point (the bottom of the V), the only component

of the impedance is the ESR. At higher frequencies (the

inductive portion) the ESR remains r elatively low so that

effective filtering is maintained.

These curves reflect the very low ESR of two typical

values. These ESRs are much lower than Tantalums or

Aluminum electrolytics of the same values. The result

is the ability to provide filtering (low loss) and to handle

high power requirements.

RIPPLE CURRENT VS FREQUENCY (TYPICAL)

Here are two examples of the ability of Switch-Mode

capacitors to handle high values of ripple current (high

power) at various frequencies. Refer to the “AC Power

Computations” applications note or contact AMC

Applications Engineering for more information.

100

1000

0.001 0.01 0.1 1 1

Ripple Current (Amperes)

Frequency (MHz)

P56, 270

P03, 10

The large ceramic mass of Switch-Mode capacitors increases their susceptibility to damage from thermal shock

during soldering. Parts should be pre-heated to within 50°C of the peak soldering temperature and the pre-

heating cycle’s thermal gradient should be limited to a maximum of 2°C per second.

SOLDERING PRECAUTIONS

SWITCH-MODE CERAMIC CAPACITORS

www.amccaps.com

Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 • (716) 372-5225 • Fax (716) 372-5467

P-SERIES SWITCH-MODE CAPACITANCE / VOLTAGE SELECTION

SWITCH-MODE CERAMIC CAPACITORS

CASE NPO Max Capacitance (µF) BX Max Capacitance (µF) X7R Max Capacitance (µF)

SIZE 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V

P05 0.07 0.05 0.04 0.02 1.3 0.70 0.37 0.17 3.0 2.2 1.0 0.50

P25 0.14 0.10 0.08 0.04 2.6 1.4 0.74 0.34 6.0 4.4 2.0 1.0

P35 0.21 0.15 0.12 0.06 3.9 2.1 1.1 0.51 9 6.6 3.0 1.5

P45 0.28 0.20 0.16 0.08 5.2 2.8 1.5 0.68 12 8.8 4.0 2.0

P55 0.35 0.25 0.20 0.10 6.5 3.5 1.8 0.85 15 11 5.0 2.5

P04 0.22 0.15 0.12 0.07 4.0 2.0 1.1 0.50 9 6.5 3.0 1.5

P24 0.44 0.30 0.24 0.14 8.0 4.0 2.2 1.0 18 13 6 3.0

P34 0.66 0.45 0.36 0.21 12 6.0 3.3 1.5 27 19 9 4.5

P44 0.88 0.60 0.48 0.28 16 8 4.4 2.0 36 26 12 6.0

P54 1.1 0.75 0.60 0.35 20 10 5.5 2.5 45 32 15 7.5

P03 0.70 0.50 0.39 0.22 10 6.8 3.5 1.5 28 20 9.5 4.7

P23 1.4 1.0 0.78 0.44 20 13 7.0 3.0 56 40 19 9.4

P33 2.1 1.5 1.2 0.66 30 20 10 4.5 84 60 28 14

P43 2.8 2.0 1.5 0.88 40 27 14 6.0 112 80 38 18

P53 3.5 2.5 2.0 1.1 50 34 17 7.5 140 100 47 23

P01 1.4 1.0 0.75 0.44 20 13 7.0 3.0 50 40 19 9.4

P21 2.8 2.0 1.5 0.88 40 27 14 6.0 100 80 38 18

P31 4.2 3.0 2.2 1.3 60 40 21 9.0 150 120 57 27

P41 5.6 4.0 3.0 1.8 80 54 28 12 200 160 76 36

P51 7.0 5.0 3.7 2.2 100 68 35 15 250 200 95 46

P02 2.0 1.4 1.0 0.6 30 19 10 5 75 55 25 14

P22 4.0 2.8 2.0 1.2 60 38 20 9 150 110 50 28

P32 6.0 4.2 3.0 1.8 90 57 30 13 220 160 75 42

P42 8.0 5.6 4.0 2.4 120 76 40 18 300 220 100 56

P52 10 7.0 5.0 3.0 150 95 50 22 370 270 125 70

P06 4.0 2.8 2.2 1.2 69 40 20 9 160 110 50 25

P26 8 5.6 4.4 2.4 130 80 40 18 320 220 100 50

P36 12 8.4 6.6 3.6 200 120 60 27 480 330 150 75

P46 16 11 8.8 4.8 270 160 80 36 640 440 200 100

P56 20 14 11 6 340 200 100 45 800 550 250 125

Dielectric speciﬁ cations may be found on page 16.

Contact the factory for RoHS products. If you don’t see it here, just ask.

MADE in the USA

Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 • (716) 372-5225 • Fax (716) 372-5467

www.amccaps.com

P-SERIES SWITCH-MODE MECHANICAL CHARACTERISTICS

SWITCH-MODE CERAMIC CAPACITORS

CASE A B C D D E F Leads

SIZE

(max”) (max”) ±.025” (min.”) (max”) (max”) (min.”) per side

P05 .120 .185

P25 .240 .305

P35 .360 .425 .250 0.224 0.275 .300 .080 3

P45 .480 .545

P55 .650 .715

P04 .120 .185

P24 .240 .305

P34 .360 .425 .400 0.350 0.425 .440 .180 4

P44 .480 .545

P54 .650 .715

P03 .120 .185

P23 .240 .305

P33 .360 .425 .450 0.950 1.075 .500 .180 10

P43 .480 .545

P53 .650 .715

P01 .120 .185

P21 .240 .305

P31 .360 .425 .450 1.950 2.075 .500 .180 20

P41 .480 .545

P51 .650 .715

P02 .120 .185

P22 .240 .305

P32 .360 .425 .800 1.450 1.535 .870 .530 15

P42 .480 .545

P52 .650 .715

P06 .120 .185

P26 .240 .305

P36 .360 .425 1.250 1.950 2.075 1.350 .980 20

P46 .480 .545

P56 .650 .715

www.amccaps.com

Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 • (716) 372-5225 • Fax (716) 372-5467

E-SERIES SWITCH-MODE CAPACITANCE / VOLTAGE SELECTION

SWITCH-MODE CERAMIC CAPACITORS

SIZE NPO Max Capacitance (µF) BX Max Capacitance (µF) X7R Max Capacitance (µF)

CODE 50V 100V 200V 500V 50V 100V 200V 500V 50V 100V 200V 500V

E24 0.13 0.09 0.07 0.045 2.2 1.5 0.8 0.35 5.0 4.0 2.5 1.0

E34 0.26 0.18 0.14 0.09 4.4 3.0 1.6 0.70 10 8.0 5.0 2.0

E44 0.39 0.27 0.21 0.13 6.6 4.5 2.4 1.0 15 12 7.5 3.0

E54 0.52 0.36 0.28 0.18 8.8 6.0 3.2 1.4 20 16 10 4.0

E25 0.22 0.15 0.12 0.08 3.9 2.5 1.4 0.60 9.0 6.5 4.0 1.8

E35 0.44 0.30 0.24 0.16 7.8 5.0 2.8 1.2 18 13 8.0 3.6

E45 0.66 0.45 0.36 0.24 11 7.5 4.2 1.8 27 19 12 5.4

E55 0.88 0.60 0.48 0.32 15 10 5.6 3.0 36 26 16 7.2

E26 0.4 0.30 0.22 0.15 7.0 4.5 2.5 1.0 16 12 7.5 3.3

E36 0.8 0.60 0.44 0.30 14 9.0 5.0 2.0 32 24 15 6.6

E46 1.2 0.90 0.66 0.45 21 13 7.5 3.0 48 36 22 9.9

E56 1.6 1.2 0.9 0.60 28 18 10 4.0 64 48 30 13

E27 0.7 0.5 0.40 0.25 13 8.5 4.5 2.0 30 22 14 6.0

E37 1.4 1.0 0.8 0.5 26 17 9.0 4.0 60 44 28 12

E47 2.1 1.5 1.2 0.8 39 25 13 6.0 90 66 42 18

E57 2.8 2.0 1.6 1.0 52 34 18 8.0 120 88 56 24

E21 0.7 0.5 0.40 0.25 13 8.5 4.5 2.0 30 22 14 6.0

E31 1.4 1.0 0.8 0.5 26 17 9.0 4.0 60 44 28 12

E41 2.1 1.5 1.2 0.8 39 25 13 6.0 90 66 42 18

E51 2.8 2.0 1.6 1.0 52 34 18 8.0 120 88 56 24

E28 0.8 0.6 0.50 0.30 15 10 5.5 2.2 35 25 16 7.0

E38 1.6 1.2 1.0 0.60 30 20 11 4.4 70 50 32 14

E48 2.4 1.8 1.5 0.90 45 30 16 6.6 100 75 48 21

E58 3.2 2.4 2.0 1.2 60 40 22 8.8 140 100 64 28

E22 1.4 1.0 0.75 0.50 24 15 8.5 3.5 50 40 25 11

E32 2.8 2.0 1.5 1.0 48 30 17 7.0 100 80 50 22

E42 3.2 3.0 2.2 2.0 72 45 25 10 150 120 75 33

E52 5.6 4.0 3.0 3.0 96 60 34 14 200 160 100 44

E29 2.0 1.4 1.0 0.70 33 22 12 5.0 75 50 35 16

E39 4.0 2.8 2.0 1.4 66 44 24 10 150 100 70 32

E49 6.0 4.2 3.0 2.1 99 66 36 15 220 150 100 48

E59 8.0 5.6 4.0 2.8 130 88 48 20 300 200 140 64

Dielectric speciﬁ cations may be found on page 16.

Contact the factory for RoHS products. If you don’t see it here, just ask.

MADE in the USA

Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 • (716) 372-5225 • Fax (716) 372-5467

www.amccaps.com

SIZE A (max.) C +/- 0.5 mm (.020”) D (max.) E (max.) Leads

CODE mm In. mm In. mm In. mm In. per side

E24 3.8 0.150

E34 7.4 0.291 8.2 0.322 8.7 0.342 9.2 0.362 3

E44 11.1 0.437

E54 14.8 0.583

E25 3.8 0.150

E35 7.4 0.291 10.2 0.400 10.7 0.421 10.7 0.421 4

E45 11.1 0.437

E55 14.8 0.583

E26 3.8 0.150

E36 7.4 0.291 14.0 0.551 13.6 0.535 14.9 0.586 5

E46 11.1 0.437

E56 14.8 0.583

E27 3.8 0.150

E37 7.4 0.291 15.2 0.600 21.6 0.850 16.8 0.661 7

E47 11.1 0.437

E57 14.8 0.583

E21 3.8 0.150

E31 7.4 0.291 20.3* 0.800* 16.6 0.653 21.6 0.850 6

E41 11.1 0.437

E51 14.8 0.583

E28 3.8 0.150

E38 7.4 0.291 10.2 0.400 38.2 1.503 12.0 0.472 14

E48 11.1 0.437

E58 14.8 0.583

E22 3.8 0.150

E32 7.4 0.291 15.2 0.600 38.2 1.503 18.9 0.744 14

E42 11.1 0.437

E52 14.8 0.583

E29 3.8 0.150

E39 7.4 0.291 20.3* 0.800* 40.6 1.598 24.0 0.944 14

E49 11.1 0.437

E59 14.8 0.583

* Lead spacing tolerance +/- 0.8 mm (.031”) when 20.3 mm (.800”) nominal spacing is specified.

E-SERIES SWITCH-MODE MECHANICAL CHARACTERISTICS

SWITCH-MODE CERAMIC CAPACITORS