General
Product code EXPI9404PTL4
Connectors Four RJ-45
EEE standards/network topology 10BASE-T, 100BASE-TX,
1000BASE-T
Wiring Category-5, unshielded twisted
pair (UTP), 4-pair
Adapter Product Features
Intel® PROSet Utility and Intel® PRO
Intelligent Install for easy installation
•
Intel® lead-free1 technology •
Plug and play specication support Standard
Auto-negotiation, full-duplex capable •
Intel® I/OAT2•
Integrated media access control (MAC)
and physical layer (PHY)
•
Includes a full-height bracket •
RoHs3•
Cable distance 100 m in Category-5 for 100/1000
Mbps; and Category-3 for 10 Mbps
Network Management
Wired for Management (WfM) baseline
v2.0 enabled for servers
•
DMI 2.0 support, Windows Management
Instrumentation (WMI) and
SNMP-manageable SMBus support
•
Remote Installation Services (RIS) •
Diagnostics (loopback, testability,
PHY register access)
•
Advanced conguration and power
interface (ACPI) 1.0 power management
•
Wake on LAN* support over PCI Express*
PXE 2.0 enabled through boot read-only
memory (ROM)
•
Network Operating Systems (NOS) Software Support
Microsoft Windows* Server 2003,
Enterprise, Datacenter (32- and 64-bit)
•
Microsoft Windows 2000 •
Red Hat Linux* 2.4x or later (32- and 64-bit) •
FreeBSD 4.x or later •
Novell Netware* •
Sun Solaris* x86, OS 8 and later •
SCO Open Server 5, OpenUNIX 8* •
Intel Backing
Limited lifetime warranty •
90-day, money-back guarantee
(U.S. and Canada)
•
Advanced Software Features
Adapter fault tolerance (AFT) •
Switch fault tolerance (SFT) •
Adaptive load balancing (ALB) •
Fast EtherChannel*5 (FEC) •
Gigabit EtherChannel*5 (GEC) •
Teaming support Scales up to 8 connections
Multiple teams Supports 4 separate teams,
maximum
IEEE 802.3ad* (link aggregation
control protocol)5
•
Test switch conguration Tested with major switch original
equipment manufacturers (OEMs)
PCIe Hot Plug*/Active peripheral
component interconnect (PCI)
•
EEE 802.1Q* VLANs •
EEE 802.3* (z, ab, u, x) ow control
support
•
TCP checksum ofoad — transmission
control protocol (TCP), user datagram
protocol (UDP), Internet protocol (IP)
•
IEEE 802.1p* •
TCP segmentation/large send ofoad •
Interrupt moderation •
Technical Features
Data rate(s) supported per port 10, 100, and 1000 Mbps
Bus type PCI Express 1.0a
Bus width x4 lane PCI Express, operable
in x4, x8, x16 slots
Bus speed (x4, encoded rate) 10 Gbps uni-directional;
20 Gbps bi-directional
EEPROM-SPI and single EEPROM support •
Interrupt levels INTA, INTB, INTC, INTD
IEEE support 802.3ab*
Hardware certications FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Controller-processor Intel® 82571GB
Typical power consumption 12.096 W (12 V @ 1.008 A)
Operating temperature 0–55° C
LEDs 4 (1/port, link and speed) solid
and blinking
Physical Dimensions
Length 16.77 cm (6.601 in)
Width 6.89 cm (2.713 in)
Height of end bracket 8.00 cm (3.153 in)
Specifications
The Intel PRO/1000 PT Quad Port LP Server Adapter’s low-profile
design, the industry’s first server adapter to incorporate four
Gigabit Ethernet connections in a low-profile PCI Express slot,
improves server throughput and rack density at the same time.
The Intel PRO/1000 PT Quad Port LP Server Adapter represents
the sixth generation of Intel® network adapters for Gigabit
Ethernet, and features 10/100/1000 Mbps self-configuration
for compatibility with mixed-speed network infrastructure.
For easy installation and management, all Intel® PRO Network
Connections are supported by Intel® PRO Intelligent Install and
the new Intel® PROSet Utility for Windows* Device Manager. Intel
PROSet simplifies adapter installation and gives you point-and-click
power to configure and manage all your Intel PRO Network
Connections for connectivity you can count on.