INCH-POUND MIL-PRF-83421/1E 11 January 2016 SUPERSEDING MIL-PRF-83421/1D 27 March 2009 PERFORMANCE SPECIFICATION SHEET CAPACITOR, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, DC AND AC, HERMETICALLY SEALED IN METAL CASES, ESTABLISHED RELIABILITY, STYLES CRH01, CRH02, CRH03, CRH04, CRH05, CRH06, CRH07, CRH08, CRH09, AND CRH00 This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-83421. STYLES CRH06 THROUGH CRH00 INACTIVE FOR DESIGN AFTER 4 JANUARY 1980. USE CRH01 THROUGH CRH05 NOTES: 1. Number 22 AWG wire (.025 inch .002 inch (0.64 mm 0.05 mm)) for case diameters of .312 inch (7.92 mm) and less. Number 20 AWG wire (.032 inch .002 inch (0.81 mm 0.05 mm)) for case diameters of .400 inch (10.16 mm) and .500 inch (12.70 mm). Number 18 AWG wire (.040 inch .002 inch (1.02 mm 0.05 mm)) for case diameters of .562 inch (14.27 mm) and over. 2. Dimensions are in inches. 3. Metric equivalents in parenthesis are given for general information only. 4. See table I for additional dimensions. 5. Insulating sleeve shall extend beyond the capacitor body. Insulating sleeve thickness shall not exceed .005 inch (0.13 mm). 6. Plastic insulating sleeve shall be transparent; marking shall be applied to the capacitor case. 7. Lead length may be a minimum of one inch (25.4 mm) long for use in tape and reel packaging, when specified in the ordering data. FIGURE 1. Capacitor configuration. AMSC N/A FSC 5910 TABLE I. Electrical characteristics, dimensions, and dash numbers. CRH01 AND CRH06 - 30 volts (DC rating) Dimensions 1/ Capacitance (in inches with mm in parentheses) value (nom) L .030 (0.76) D G, max (in f) +.020 (0.51) -.010 (0.25) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .562 (14.27) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .193 (4.90) .193 (4.90) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) See footnotes at end of table. .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .762 (19.35) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) Capacitance tolerance value (in %) 0.25 -001-007-013-019-025-031-037-043-049-055-061-067-073-079-085-091-097-103-109-115-121-127-133-139-145-151-157-163-169-175-181-373-187-193-199-205-211- 0.5 -002-008-014-020-026-032-038-044-050-056-062-068-074-080-086-092-098-104-110-116-122-128-134-140-146-152-158-164-170-176-182-374-188-194-200-206-212- 1.0 -003-009-015-021-027-033-039-045-051-057-063-069-075-081-087-093-099-105-111-117-123-129-135-141-147-153-159-165-171-177-183-375-189-195-201-207-213- 2.0 -004-010-016-022-028-034-040-046-052-058-064-070-076-082-088-094-100-106-112-118-124-130-136-142-148-154-160-166-172-178-184-376-190-196-202-208-214- 5.0 -005-011-017-023-029-035-041-047-053-059-065-071-077-083-089-095-101-107-113-119-125-131-137-143-149-155-161-167-173-179-185-377-191-197-203-209-215- 10.0 -006-012-018-024-030-036-042-048-054-060-066-072-078-084-090-096-102-108-114-120-126-132-138-144-150-156-162-168-174-180-186-378-192-198-204-210-216- AC ratings (for sinusoidal operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Volts Current Volts Current Volts Current (in A) (in A) (in A) 22.0 .001 22.0 .001 22.0 .006 22.0 .001 22.0 .001 22.0 .007 22.0 .001 22.0 .001 22.0 .008 22.0 .001 22.0 .001 22.0 .010 22.0 .001 22.0 .001 22.0 .011 22.0 .001 22.0 .001 22.0 .012 22.0 .001 22.0 .002 22.0 .015 22.0 .001 22.0 .002 22.0 .018 22.0 .001 22.0 .002 22.0 .021 22.0 .001 22.0 .003 22.0 .026 22.0 .001 22.0 .003 22.0 .028 22.0 .001 22.0 .003 22.0 .031 22.0 .001 22.0 .004 22.0 .037 22.0 .001 22.0 .005 22.0 .045 22.0 .001 22.0 .006 22.0 .055 22.0 .001 22.0 .007 22.0 .066 22.0 .001 22.0 .008 22.0 .082 22.0 .001 22.0 .010 22.0 .10 22.0 .001 22.0 .011 22.0 .11 22.0 .001 22.0 .012 22.0 .12 22.0 .001 22.0 .015 22.0 .15 22.0 .002 22.0 .018 22.0 .18 22.0 .002 22.0 .021 22.0 .22 22.0 .003 22.0 .026 22.0 .26 22.0 .003 22.0 .028 22.0 .28 22.0 .003 22.0 .031 22.0 .31 22.0 .004 22.0 .037 22.0 .37 22.0 .005 22.0 .045 22.0 .45 22.0 .006 22.0 .055 22.0 .55 22.0 .007 22.0 .066 22.0 .66 22.0 .008 22.0 .082 22.0 .83 22.0 .010 22.0 .100 22.0 1.00 22.0 .011 22.0 .110 20.0 1.00 22.0 .012 22.0 .120 18.5 1.02 22.0 .015 22.0 .150 17.0 1.15 22.0 .018 22.0 .180 16.0 1.32 22.0 .021 22.0 .21 15.0 1.46 MIL-PRF-83421/1E 2 0.001 0.0012 0.0015 0.0018 0.002 0.0022 0.0027 0.0033 0.0039 0.0047 0.005 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.02 0.022 0.027 0.033 0.039 0.047 0.05 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.20 0.22 0.27 0.33 0.39 Dash numbers 2/ TABLE I. Electrical characteristics, dimensions, and dash numbers - Continued. CRH01 AND CRH06 - 30 volts (DC rating) Dimensions 1/ Capacitance (in inches with mm in parentheses) value (nom) L .030 (0.76) D G, max (in f) +.020 (0.51) -.010 (0.25) Capacitance tolerance value (in %) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) 1.063 (27.00) 1.063 (27.00) 1.063 (27.00) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .500 (12.70) .500 (12.70) .500 (12.70) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .670 (17.02) .670 (17.02) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.263 (32.08) 1.263 (32.08) 1.263 (32.08) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) 0.25 -217-223-229-235-241-247-253-259-265-271-277-385-289-295-301-313-319-325-331-337-343-349-379-355-361-367- 0.5 -218-224-230-236-242-248-254-260-266-272-278-386-290-296-302-314-320-326-332-338-344-350-380-356-362-368- 1.0 -219-225-231-237-243-249-255-261-267-273-279-387-291-297-303-315-321-327-333-339-345-351-381-357-363-369- 2.0 -220-226-232-238-244-250-256-262-268-274-280-388-292-298-304-316-322-328-334-340-346-352-382-358-364-370- 5.0 -221-227-233-239-245-251-257-263-269-275-281-389-293-299-305-317-323-329-335-341-347-353-383-359-365-371- 10.0 -222-228-234-240-246-252-258-264-270-276-282-390-294-300-306-318-324-330-336-342-348-354-384-360-366-372- AC ratings (for sinusoidal operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Volts Current Volts Current Volts Current (in A) (in A) (in A) 22.0 .026 22.0 .26 14.0 1.65 22.0 .028 22.0 .28 13.5 1.69 22.0 .031 22.0 .31 12.9 1.81 22.0 .037 22.0 .37 12.0 2.04 22.0 .045 22.0 .45 10.0 2.05 22.0 .055 22.0 .55 8.4 2.10 22.0 .066 22.0 .66 7.2 2.15 22.0 .082 22.0 .83 5.8 2.17 22.0 .099 22.0 .99 4.8 2.20 22.0 .110 22.0 1.10 4.4 2.20 22.0 .12 22.0 1.21 4.0 2.20 22.0 .15 22.0 1.49 3.3 2.20 22.0 .17 22.0 1.65 2.9 2.20 22.0 .18 22.0 1.82 2.7 2.20 22.0 .21 22.0 2.14 2.3 2.20 22.0 .26 18.7 2.20 1.9 2.20 22.0 .28 17.6 2.20 1.8 2.20 22.0 .31 15.7 2.20 1.6 2.20 22.0 .37 13.0 2.20 1.3 2.20 22.0 .44 11.0 2.20 1.1 2.20 22.0 .45 10.7 2.20 1.1 2.20 22.0 .55 8.8 2.20 .88 2.20 22.0 .66 7.3 2.20 .73 2.20 22.0 .83 5.9 2.20 .59 2.20 22.0 1.10 4.4 2.20 .44 2.20 22.0 1.21 4.0 2.20 .40 2.20 CRH02 AND CRH07 - 50 volts (DC rating) 0.001 0.0012 0.0015 0.0018 0.002 0.0022 0.0027 0.0033 0.0039 See footnotes at end of table. -001-007-013-019-025-031-037-043-049- -002-008-014-020-026-032-038-044-050- -003-009-015-021-027-033-039-045-051- -004-010-016-022-028-034-040-046-052- -005-011-017-023-029-035-041-047-053- -006-012-018-024-030-036-042-048-054- 36.0 36.0 36.0 36.0 36.0 36.0 36.0 36.0 36.0 .001 .001 .001 .001 .001 .001 .001 .001 .001 36.0 36.0 36.0 36.0 36.0 36.0 36.0 36.0 36.0 .001 .001 .001 .002 .002 .002 .002 .003 .004 36.0 36.0 36.0 36.0 36.0 36.0 36.0 36.0 36.0 .009 .011 .013 .016 .018 .020 .024 .030 .035 MIL-PRF-83421/1E 3 0.47 0.50 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.7 3.0 3.3 3.9 4.7 5.0 5.6 6.8 8.0 8.2 10.0 12.0 15.0 20.0 22.0 Dash numbers 2/ TABLE I. Electrical characteristics, dimensions, and dash numbers - Continued. CRH02 AND CRH07 - 50 volts (DC rating) Dimensions 1/ Capacitance (in inches with mm in parentheses) value (nom) L .030 (0.76) D G, max (in f) +.020 (0.51) -.010 (0.25) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .813 (20.65) .813 (20.65) .687 (17.45) .687 (17.45) .813 (20.65) .813 (20.65) .813 (20.65) .687 (17.45) .687 (17.45) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) 1.063 (27.00) 1.063 (27.00) 1.063 (27.00) 1.063 (27.00) 1.063 (27.00) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .193 (4.90) .193 (4.90) .193 (4.90) .193 (4.90) .193 (4.90) .170 (4.32) .170 (4.32) .170 (4.32) .193 (4.90) .193 (4.90) .193 (4.90) .193 (4.90) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) See footnotes at end of table. .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) 1.013 (25.73) 1.013 (25.73) .887 (22.53) .887 (22.53) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) .887 (22.53) .887 (22.53) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.263 (32.08) 1.263 (32.08) 1.263 (32.08) 1.263 (32.08) 1.263 (32.08) Capacitance tolerance value (in %) 0.25 -055-061-067-073-079-085-091-097-103-109-115-121-127-133-139-145-151-157-163-169-175-181-187-193-199-205-211-217-223-229-235-241-247-253-259-265-271- 0.5 -056-062-068-074-080-086-092-098-104-110-116-122-128-134-140-146-152-158-164-170-176-182-188-194-200-206-212-218-224-230-236-242-248-254-260-266-272- 1.0 -057-063-069-075-081-087-093-099-105-111-117-123-129-135-141-147-153-159-165-171-177-183-189-195-201-207-213-219-225-231-237-243-249-255-261-267-273- 2.0 -058-064-070-076-082-088-094-100-106-112-118-124-130-136-142-148-154-160-166-172-178-184-190-196-202-208-214-220-226-232-238-244-250-256-262-268-274- 5.0 -059-065-071-077-083-089-095-101-107-113-119-125-131-137-143-149-155-161-167-173-179-185-191-197-203-209-215-221-227-233-239-245-251-257-263-269-275- 10.0 -060-066-072-078-084-090-096-102-108-114-120-126-132-138-144-150-156-162-168-174-180-186-192-198-204-210-216-222-228-234-240-246-252-258-264-270-276- AC ratings (for sinusoidal operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Volts Current Volts Current Volts Current (in A) (in A) (in A) 36.0 .001 36.0 .004 36.0 .042 36.0 .001 36.0 .005 36.0 .045 36.0 .001 36.0 .005 36.0 .050 36.0 .001 36.0 .006 36.0 .061 36.0 .001 36.0 .007 36.0 .074 36.0 .001 36.0 .009 36.0 .090 36.0 .001 36.0 .011 36.0 .11 36.0 .001 36.0 .013 36.0 .14 36.0 .002 36.0 .016 36.0 .16 36.0 .002 36.0 .018 36.0 .18 36.0 .002 36.0 .020 36.0 .20 36.0 .002 36.0 .024 36.0 .24 36.0 .003 36.0 .030 36.0 .30 36.0 .004 36.0 .035 36.0 .35 36.0 .004 36.0 .042 36.0 .42 36.0 .005 36.0 .045 36.0 .45 36.0 .005 36.0 .050 36.0 .50 36.0 .006 36.0 .061 34.0 .58 36.0 .007 36.0 .074 32.0 .66 36.0 .009 36.0 .090 30.0 .75 36.0 .011 36.0 .11 30.0 .90 36.0 .013 36.0 .14 26.0 .98 36.0 .016 36.0 .16 25.0 1.13 36.0 .018 36.0 .18 24.0 1.20 36.0 .020 36.0 .20 23.0 1.27 36.0 .024 36.0 .24 19.0 1.28 36.0 .030 36.0 .30 18.0 1.48 36.0 .035 36.0 .35 17.0 1.66 36.0 .042 36.0 .42 15.7 1.85 36.0 .045 36.0 .45 15.2 1.90 36.0 .050 36.0 .50 14.4 2.01 36.0 .061 36.0 .61 14.0 2.38 36.0 .074 36.0 .74 12.0 2.46 36.0 .090 36.0 .90 10.0 2.50 36.0 .11 36.0 1.08 9.1 2.73 36.0 .14 36.0 1.35 7.7 2.90 36.0 .16 36.0 1.62 6.6 3.00 MIL-PRF-83421/1E 4 0.0047 0.005 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.02 0.022 0.027 0.033 0.039 0.047 0.05 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.20 0.22 0.27 0.33 0.39 0.47 0.50 0.56 0.68 0.82 1.0 1.2 1.5 1.8 Dash numbers 2/ TABLE I. Electrical characteristics, dimensions, and dash numbers - Continued. CRH02 AND CRH07 - 50 volts (DC rating) Dimensions 1/ Capacitance (in inches with mm in parentheses) value (nom) L .030 (0.76) D G, max (in f) +.020 (0.51) -.010 (0.25) 1.125 (28.58) 1.125 (28.58) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .562 (14.27) .670 (17.02) .670 (17.02) .670 (17.02) .670 (17.02) .670 (17.02) .670 (17.02) .670 (17.02) 1.325 (33.66) 1.325 (33.66) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .500 (12.70) .562 (14.27) .562 (14.27) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .193 (4.90) .193 (4.90) .193 (4.90) .193 (4.90) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .700 (17.78) .762 (19.35) .762 (19.35) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) Capacitance tolerance value (in %) 0.25 -277-283-289-295-301-307-319-325-331-337-343-349-355- 0.5 -278-284-290-296-302-308-320-326-332-338-344-350-356- 1.0 -279-285-291-297-303-309-321-327-333-339-345-351-357- 2.0 -280-286-292-298-304-310-322-328-334-340-346-352-358- 5.0 -281-287-293-299-305-311-323-329-335-341-347-353-359- 10.0 -282-288-294-300-306-312-324-330-336-342-348-354-360- AC ratings (for sinusoidal operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Volts Current Volts Current Volts Current (in A) (in A) (in A) 36.0 .18 36.0 1.80 6.2 3.10 36.0 .20 36.0 1.98 5.8 3.20 36.0 .24 36.0 2.43 5.0 3.34 36.0 .27 36.0 2.70 4.5 3.40 36.0 .30 36.0 2.97 4.2 3.50 36.0 .35 36.0 3.51 3.7 3.60 36.0 .42 31.0 3.60 3.1 3.60 36.0 .45 29.0 3.60 2.9 3.60 36.0 .50 26.0 3.60 2.6 3.60 36.0 .61 21.2 3.60 2.1 3.60 36.0 .72 18.0 3.60 1.8 3.60 36.0 .74 17.6 3.60 1.8 3.60 36.0 .90 14.4 3.60 1.4 3.60 CRH03 AND CRH08 - 100 VOLTS (DC RATING) 5 0.001 0.0012 0.0015 0.0018 0.002 0.0022 0.0027 0.0033 0.0039 0.0047 0.005 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.02 0.022 0.027 See footnotes at end of table. -001-007-013-019-025-031-037-043-049-055-061-067-073-079-085-091-097-103-109-115-121- -002-008-014-020-026-032-038-044-050-056-062-068-074-080-086-092-098-104-110-116-122- -003-009-015-021-027-033-039-045-051-057-063-069-075-081-087-093-099-105-111-117-123- -004-010-016-022-028-034-040-046-052-058-064-070-076-082-088-094-100-106-112-118-124- -005-011-017-023-029-035-041-047-053-059-065-071-077-083-089-095-101-107-113-119-125- -006-012-018-024 -030-036-042-048-054-060-066-072-078-084-090-096-102-108-114-120-126- 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 .001 .001 .001 .001 .001 .001 .001 .001 .001 .001 .001 .001 .001 .001 .002 .002 .002 .003 .003 .003 .004 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 .002 .002 .002 .003 .003 .003 .004 .005 .006 .007 .008 .008 .010 .012 .015 .018 .022 .027 .030 .033 .041 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 59.0 58.0 57.0 55.0 53.0 51.0 .015 .018 .022 .027 .030 .033 .041 .050 .058 .071 .075 .084 .10 .12 .15 .18 .22 .26 .28 .29 .34 MIL-PRF-83421/1E 2.0 2.2 2.7 3.0 3.3 3.9 4.7 5.0 5.6 6.8 8.0 8.2 10.0 Dash numbers 2/ TABLE I. Electrical characteristics, dimensions, and dash numbers - Continued. CRH03 AND CRH08 - 100 VOLTS (DC RATING) Dimensions 1/ Capacitance (in inches with mm in parentheses) value (nom) L .030 (0.76) D G, max (in f) +.020 (0.51) -.010 (0.25) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .813 (20.65) .687 (17.45) .687 (17.45) .687 (17.45) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) 1.063 (27.00) 1.063 (27.00) 1.063 (27.00) 1.063 (27.00) 1.063 (27.00) 1.063 (27.00) 1.125 (28.58) 1.125 (28.58) 1.125 (28.58) 1.125 (28.58) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 2.375 (60.33) 2.375 (60.33) 2.375 (60.33) 2.375 (60.33) .193 (4.90) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .500 (12.70) .500 (12.70) .562 (14.27) .562 (14.27) .562 (14.27) .670 (17.02) .670 (17.02) .670 (17.02) .670 (17.02) .670 (17.02) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) See footnotes at end of table. .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) 1.013 (25.73) .887 (22.53) .887 (22.53) .887 (22.53) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.263 (32.08) 1.263 (32.08) 1.263 (32.08) 1.263 (32.08) 1.263 (32.08) 1.263 (32.08) 1.325 (33.66) 1.325 (33.66) 1.325 (33.66) 1.325 (33.66) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 2.075 (40.01) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.575 (65.41) 2.575 (65.41) 2.575 (65.41) 2.575 (65.41) Capacitance tolerance value (in %) 0.25 -127-133-139-145-151-157-163-169-175-181-187-193-199-205-211-217-223-229-235-241-247-253-259-265-271-277-283-289-295-301-313-319-325-331-337-343-349- 0.5 -128-134-140-146-152-158-164-170-176-182-188-194-200-206-212-218-224-230-236-242-248-254-260-266-272-278-284-290-296-302-314-320-326-332-338-344-350- 1.0 -129-135-141-147-153-159-165-171-177-183-189-195-201-207-213-219-225-231-237-243-249-255-261-267-273-279-285-291-297-303-315-321-327-333-339-345-351- 2.0 -130-136-142-148-154-160-166-172-178-184-190-196-202-208-214-220-226-232-238-244-250-256-262-268-274-280-286-292-298-304-316-322-328-334-340-346-352- 5.0 -131-137-143-149-155-161-167-173-179-185-191-197-203-209-215-221-227-233-239-245-251-257-263-269-275-281-287-293-299-305-317-323-329-335-341-347-353- 10.0 -132-138-144-150-156-162-168-174-180-186-192-198-204-210-216-222-228-234-240-246-252-258-264-270-276-282-288-294-300-306-318-324-330-336-342-348-354- AC ratings (for sinusoidal operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Volts Current Volts Current Volts Current (in A) (in A) (in A) 60.0 .005 60.0 .050 50.0 .41 60.0 .006 60.0 .059 48.0 .47 60.0 .007 60.0 .070 47.0 .55 60.0 .008 60.0 .075 46.0 .58 60.0 .008 60.0 .084 46.0 .64 60.0 .010 60.0 .10 42.0 .71 60.0 .012 60.0 .12 38.0 .78 60.0 .015 60.0 .15 36.0 .90 60.0 .018 60.0 .18 35.0 1.05 60.0 .022 60.0 .23 33.0 1.24 60.0 .027 60.0 .27 31.0 1.40 60.0 .030 60.0 .30 30.0 1.50 60.0 .033 60.0 .33 27.0 1.50 60.0 .041 60.0 .41 24.0 1.62 60.0 .050 60.0 .50 23.0 1.90 60.0 .058 60.0 .59 22.0 2.15 60.0 .071 60.0 .71 21.0 2.47 60.0 .075 60.0 .75 20.0 2.50 60.0 .084 60.0 .84 19.0 2.64 60.0 .10 60.0 1.02 16.0 2.72 60.0 .12 60.0 1.23 14.0 2.87 60.0 .15 60.0 1.50 12.0 3.00 60.0 .18 60.0 1.80 11.0 3.25 60.0 .23 60.0 2.26 10.0 3.75 60.0 .30 60.0 3.00 8.1 4.10 60.0 .33 60.0 3.31 7.5 4.12 60.0 .41 60.0 4.05 6.5 4.40 60.0 .45 60.0 4.51 6.0 4.51 60.0 .50 55.0 4.73 5.5 4.55 60.0 .59 49.0 4.90 5.0 4.90 60.0 .71 43.0 5.00 4.3 5.00 60.0 .75 40.0 5.00 4.0 5.00 60.0 .84 36.0 5.00 3.6 5.00 60.0 1.02 29.0 5.00 3.0 5.00 60.0 1.20 25.0 5.00 2.5 5.00 60.0 1.23 24.4 5.00 2.4 5.00 60.0 1.50 20.0 5.00 2.0 5.00 MIL-PRF-83421/1E 6 0.033 0.039 0.047 0.050 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.20 0.22 0.27 0.33 0.39 0.47 0.50 0.56 0.68 0.82 1.0 1.2 1.5 2.0 2.2 2.7 3.0 3.3 3.9 4.7 5.0 5.6 6.8 8.0 8.2 10.0 Dash numbers 2/ TABLE I. Electrical characteristics, dimensions, and dash numbers - Continued. CRH04 AND CRH09 - 200 VOLTS (DC RATING) Dimensions 1/ Capacitance (in inches with mm in parentheses) value (nom) L .030 (0.76) D G, max (in f) +.020 (0.51) -.010 (0.25) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) 1.063 (27.00) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .193 (4.90) .193 (4.90) .193 (4.90) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .500 (12.70) .500 (12.70) See footnotes at end of table. .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) 1.013 (20.65) 1.013 (20.65) 1.013 (20.65) 1.013 (20.65) 1.013 (20.65) 1.263 (32.08) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) Capacitance tolerance value (in %) 0.25 -001-007-013-019-025-031-037-043-049-055-061-067-073-079-085-091-097-103-109-115-121-127-133-139-145-151-157-163-169-175-181-187-193-199-205-211- 0.5 -002-008-014-020-026-032-038-044-050-056-062-068-074-080-086-092-098-104-110-116-122-128-134-140-146-152-158-164-170-176-182-188-194-200-206-212- 1.0 -003-009-015-021-027-033-039-045-051-057-063-069-075-081-087-093-099-105-111-117-123-129-135-141-147-153-159-165-171-177-183-189-195-201-207-213- 2.0 -004-010-016-022-028-034-040-046-052-058-064-070-076-082-088-094-100-106-112-118-124-130-136-142-148-154-160-166-172-178-184-190-196-202-208-214- 5.0 -005-011-017-023-029-035-041-047-053-059-065-071-077-083-089-095-101-107-113-119-125-131-137-143-149-155-161-167-173-179-185-191-197-203-209-215- 10.0 -006-012-018-024-030-036-042-048-054-060-066-072-078-084-090-096-102-108-114-120-126-132-138-144-150-156-162-168-174-180-186-192-198-204-210-216- AC ratings (for sinusoidal operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Volts Current Volts Current Volts Current (in A) (in A) (in A) 120.0 .001 120.0 .003 80.0 .020 120.0 .001 120.0 .004 80.0 .024 120.0 .001 120.0 .004 80.0 .030 120.0 .005 120.0 .005 80.0 .036 120.0 .001 120.0 .006 80.0 .040 120.0 .001 120.0 .007 80.0 .044 120.0 .001 120.0 .008 80.0 .054 120.0 .001 120.0 .010 80.0 .066 120.0 .001 120.0 .012 80.0 .078 120.0 .001 120.0 .014 80.0 .094 120.0 .002 120.0 .015 80.0 .10 120.0 .002 120.0 .017 80.0 .11 120.0 .002 120.0 .020 80.0 .14 120.0 .002 120.0 .025 80.0 .16 120.0 .003 120.0 .030 80.0 .20 120.0 .004 120.0 .036 78.0 .23 120.0 .004 120.0 .045 76.0 .29 120.0 .005 120.0 .054 74.0 .33 120.0 .006 120.0 .060 71.0 .36 120.0 .007 120.0 .066 68.0 .37 120.0 .008 120.0 .081 65.0 .44 120.0 .010 120.0 .099 62.0 .51 120.0 .012 120.0 .12 60.0 .59 120.0 .014 120.0 .14 57.0 .67 120.0 .015 120.0 .15 56.0 .70 120.0 .017 120.0 .17 56.0 .78 120.0 .020 120.0 .20 50.0 .85 120.0 .025 120.0 .25 44.0 .90 120.0 .030 120.0 .30 42.0 1.10 120.0 .036 120.0 .36 40.0 1.20 120.0 .045 120.0 .45 36.0 1.34 120.0 .054 120.0 .54 34.0 1.54 120.0 .060 120.0 .60 33.0 1.65 120.0 .066 120.0 .66 32.0 1.76 120.0 .081 120.0 .81 29.0 1.96 120.0 .099 120.0 .99 28.0 2.31 MIL-PRF-83421/1E 7 0.001 0.0012 0.0015 0.0018 0.002 0.0022 0.0027 0.0033 0.0039 0.0047 0.005 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.02 0.022 0.027 0.033 0.039 0.047 0.05 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.20 0.22 0.27 0.33 Dash numbers 2/ TABLE I. Electrical characteristics, dimensions, and dash numbers - Continued. CRH04 AND CRH09 - 200 VOLTS (DC RATING) Dimensions 1/ Capacitance (in inches with mm in parentheses) value (nom) L .030 (0.76) D G, max (in f) +.020 (0.51) -.010 (0.25) 1.375 (34.93) .500 (12.70) 1.575 (40.01) 1.375 (34.93) .500 (12.70) 1.575 (40.01) 1.375 (34.93) .500 (12.70) 1.575 (40.01) 1.375 (34.93) .500 (12.70) 1.575 (40.01) 1.375 (34.93) .562 (14.27) 1.575 (40.01) 1.875 (47.63) .562 (14.27) 2.075 (52.71) 1.875 (47.63) .562 (14.27) 2.075 (52.71) 1.875 (47.63) .562 (14.27) 2.075 (52.71) 1.875 (47.63) .670 (17.02) 2.075 (52.71) 1.875 (47.63) .750 (19.05) 2.075 (52.71) 1.875 (47.63) .750 (19.05) 2.075 (52.71) 1.875 (47.63) .750 (19.05) 2.075 (52.71) 1.875 (47.63) .750 (19.05) 2.075 (52.71) 1.875 (47.63) .750 (19.05) 2.075 (52.71) 1.875 (47.63) 1.000 (25.40) 2.075 (52.71) 1.875 (47.63) 1.000 (25.40) 2.075 (52.71) 2.375 (60.33) 1.000 (25.40) 2.575 (65.41) Capacitance tolerance value (in %) 0.25 -217-223-229-235-241-247-253-259-265-271-277-283-289-295-301-307-313- 0.5 -218-224-230-236-242-248-254-260-266-272-278-284-290-296-302-308-314- 1.0 -219-225-231-237-243-249-255-261-267-273-279-285-291-297-303-309-315- 2.0 -220-226-232-238-244-250-256-262-268-274-280-286-292-298-304-310-316- 5.0 -221-227-233-239-245-251-257-263-269-275-281-287-293-299-305-311-317- 10.0 -222-228-234-240-246-252-258-264-270-276-282-288-294-300-306-312-318- AC ratings (for sinusoidal operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Volts Current Volts Current Volts Current (in A) (in A) (in A) 120.0 .12 120.0 1.17 27.0 2.63 120.0 .14 120.0 1.41 26.0 3.06 120.0 .15 120.0 1.50 25.0 3.13 120.0 .17 120.0 1.61 23.0 3.17 120.0 .20 120.0 1.87 20.0 3.40 120.0 .25 120.0 2.05 18.0 3.70 120.0 .30 120.0 2.25 15.0 3.75 120.0 .36 120.0 2.61 13.5 4.05 120.0 .45 120.0 3.20 12.0 4.50 120.0 .54 110.0 3.74 11.0 5.00 120.0 .60 100.0 4.05 10.0 5.00 120.0 .66 90.5 4.20 9.1 5.00 120.0 .75 80.0 4.31 8.0 5.00 120.0 .81 77.0 4.60 7.7 5.20 120.0 .90 70.0 5.04 7.0 5.27 120.0 .99 65.0 5.21 6.5 5.36 120.0 1.20 55.0 5.39 5.5 5.40 CRH05 AND CRH00 - 400 VOLTS (DC RATING) 0.001 0.0012 0.0015 0.0018 0.002 0.0022 0.0027 0.0033 0.0039 0.0047 0.005 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .687 (17.45) .687 (17.45) .687 (17.45) .687 (17.45) .813 (20.65) .813 (20.65) .193 (4.90) .193 (4.90) .193 (4.90) .193 (4.90) .193 (4.90) .193 (4.90) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .235 (5.97) .312 (7.92) See footnotes at end of table. .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .762 (19.35) .887 (22.53) .887 (22.53) .887 (22.53) .887 (22.53) 1.013 (25.73) 1.013 (25.73) -001-007-013-019-025-031-037-043-049-055-061-067-073-079-085-091-097-103- -002-008-014-020-026-032-038-044-050-056-062-068-074-080-086-092-098-104- -003-009-015-021-027-033-039-045-051-057-063-069-075-081-087-093-099-105- -004-010-016-022-028-034-040-046-052-058-064-070-076-082-088-094-100-106- -005-011-017-023-029-035-041-047-053-059-065-071-077-083-089-095-101-107- -006-012-018-024-030-036-042-048-054-060-066-072-078-084-090-096-102-108- 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 .001 .001 .001 .001 .001 .001 .002 .002 .002 .003 .003 .003 .004 .005 .006 .007 .009 .011 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 .006 .007 .009 .011 .012 .013 .016 .020 .023 .028 .030 .034 .041 .049 .060 .072 .090 .11 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 94.0 90.0 .025 .030 .037 .045 .050 .055 .068 .083 .097 .12 .13 .14 .17 .21 .25 .30 .35 .41 MIL-PRF-83421/1E 8 0.39 0.47 0.50 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.5 2.7 3.0 3.3 3.9 Dash numbers 2/ TABLE I. Electrical characteristics, dimensions, and dash numbers - Continued. CRH05 AND CRH00 - 400 VOLTS (DC RATING) Dimensions 1/ Capacitance (in inches with mm in parentheses) value (nom) L .030 (0.76) D G, max (in f) +.020 (0.51) -.010 (0.25) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) 1.063 (27.00) 1.063 (27.00) 1.063 (27.00) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.375 (34.93) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 1.875 (47.63) 2.375 (60.33) 2.375 (60.33) 2.375 (60.33) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .400 (10.16) .500 (12.70) .500 (12.70) .500 (12.70) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .750 (19.05) .750 (19.05) .750 (19.05) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.013 (25.73) 1.263 (32.08) 1.263 (32.08) 1.263 (32.08) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 1.575 (40.01) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.075 (52.71) 2.575 (65.41) 2.575 (65.41) 2.575 (65.41) Capacitance tolerance value (in %) 0.25 -271-109-115-121-127-133-139-145-151-157-163-169-175-277-181-187-193-199-205-211-217-223-229-235-241-247-253-259-265- 0.5 -272-110-116-122-128-134-140-146-152-158-164-170-176-278-182-188-194-200-206-212-218-224-230-236-242-248-254-260-266- 1.0 -273-111-117-123-129-135-141-147-153-159-165-171-177-279-183-189-195-201-207-213-219-225-231-237-243-249-255-261-267- 2.0 -274-112-118-124-130-136-142-148-154-160-166-172-178-280-184-190-196-202-208-214-220-226-232-238-244-250-256-262-268- 5.0 -275-113-119-125-131-137-143-149-155-161-167-173-179-281-185-191-197-203-209-215-221-227-233-239-245-251-257-263-269- 10.0 -276-114-120-126-132-138-144-150-156-162-168-174-180-282-186-192-198-204-210-216-222-228-234-240-246-252-258-264-270- AC ratings (for sinusoidal operation from -65 to +100C) 3/ 0 to .4 kHz At 4 kHz At 40 kHz Volts Current Volts Current Volts Current (in A) (in A) (in A) 240.0 .012 240.0 .12 88.0 .44 240.0 .013 240.0 .13 85.0 .47 240.0 .016 240.0 .16 81.0 .55 240.0 .020 240.0 .20 78.0 .65 240.0 .023 240.0 .23 75.0 .73 240.0 .028 240.0 .28 71.0 .83 240.0 .030 240.0 .30 70.0 .88 240.0 .034 240.0 .34 67.5 .95 240.0 .041 240.0 .41 60.0 1.02 240.0 .049 240.0 .49 50.0 1.03 240.0 .060 240.0 .60 46.0 1.20 240.0 .072 240.0 .72 44.5 1.34 240.0 .090 240.0 .83 40.0 1.50 240.0 .11 240.0 .95 38.0 1.70 240.0 .12 240.0 1.03 37.0 1.85 240.0 .13 240.0 1.10 35.0 1.93 240.0 .16 240.0 1.21 33.0 2.24 240.0 .20 240.0 1.32 32.0 2.65 240.0 .23 240.0 1.48 32.0 3.14 240.0 .28 240.0 1.68 31.0 3.64 240.0 .30 240.0 1.75 30.0 3.75 240.0 .34 240.0 1.92 29.0 4.05 240.0 .41 240.0 2.26 26.0 4.50 240.0 .49 234.0 2.63 23.4 4.80 240.0 .60 208.0 3.00 20.8 5.20 240.0 .72 183.0 3.48 18.3 5.50 240.0 .90 160.0 4.14 16.0 6.00 240.0 1.08 150.0 4.69 15.0 6.80 240.0 1.20 140.0 5.00 14.0 7.00 1/ L and D dimensions are bare case dimensions (see figure 1). 2/ The complete dash number will include the applicable letter completing the style designator (CRH01 = 1, CRH02 = 2, etc.) as a prefix and the applicable FR level symbol (M, P, R, or S) as a suffix. 3/ For +125C operation, linearly derate +100C rating by 50 percent. MIL-PRF-83421/1E 9 0.02 0.022 0.027 0.033 0.039 0.047 0.05 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.20 0.22 0.27 0.33 0.39 0.47 0.50 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 Dash numbers 2/ MIL-PRF-83421/1E REQUIREMENTS: Dimensions and configuration: See figure 1 and table I. Case material: Nonmagnetic (end seals may be of magnetic material). Leads: .500 inch (12.70 mm) and smaller case diameters: Composition W and final finish 32 of MIL-STD-1276. Composition N and final finish 32 of MIL-STD-1276 may be furnished when specified in contract or order (see MIL-PRF-83421 ordering data). .562 inch (14.27 mm) and larger case diameters: Composition C and final finish 32 of MIL-STD-1276. Capacitance value: See table I. Capacitance tolerance: See table I. Rated voltage: AC (see table I), DC (see table I and table II). TABLE II. DC ratings. Styles CRH01, CRH06 CRH02, CRH07 CRH03, CRH08 CRH04, CRH09 CRH05, CRH00 Volts, dc 30 50 100 200 400 Operating temperature range: -65C to +100C; derate linearly from +100C to 50 percent of rated voltage at +125C. Failure rate (FR) level: M (1.0%), P (0.1%), R (0.01%), and S (0.001%) (established at dc rated voltage at +100C ). Burn-in (styles CRH01 through CRH05 only): 140 percent, minimum of dc rated voltage shall be applied for 48 hours, minimum at +125C +4C, -0C. Thermal shock: Method 107 of MIL-STD-202, test condition B. Styles CRH01 through CRH05: 10 cycles. Styles CRH06 through CRH00: 5 cycles. Seal: Method 112 of MIL-STD-202, test condition C, procedure IIIa. The following details and exceptions shall apply: Bomb pressure: 45 5 lbf/in (gage). 2 Exposure time: 1 hour +1 hour, -0 hour. Dwell time: 1 hour, maximum. Reject limit: -6 3 Styles CRH01 through CRH05: R1 = 1 x 10 atm cm /s. 10 MIL-PRF-83421/1E -5 3 Styles CRH06 through CRH00: R1 = 1 X 10 atm cm /s. Upon completion of test condition C, perform either test condition A, test condition B with mineral oil, or test condition D. Dielectric withstanding voltage (DWV): Method 301 of MIL-STD-202. Terminal to terminal: AC: 100 Hz 10 Hz square wave, peak-to-peak voltage, three times dc rated voltage for 60 seconds, minimum but need not exceed 800 V peak-to-peak. DC: 200 percent of dc rated voltage for 60 seconds, minimum. Insulation resistance (IR): Method 302 of MIL-STD-202. Charge time 5 minutes, maximum; however, for capacitance values greater than 1.0 F, an additional 1 minute per F is permitted. Terminal to terminal (dc rated voltage): See table III. Terminals to case: 10,000 megohms, minimum. TABLE III. Insulation resistance versus capacitance value. Styles Temperature +25C CRH01, CRH02, CRH03, CRH04, CRH05 +100C +125C +25C CRH06, CRH07, CRH08,CRH09, CRH00 +100C +125C Dissipation factor (DF): 0.15 percent, maximum. Dielectric absorption: 0.1 percent, maximum. 11 0F to .1F Minimum insulation resistance (terminal to terminal) 3,000,000 megohms Greater than .1F 300,000 megohm-microfarads 0F to .1F 300,000 megohms Greater than .1F 30,000 megohm-microfarads 0F to .1F 20,000 megohms Greater than .1F 0F to .1F Greater than .1F 0F to .1F Greater than .1F 0F to .1F Greater than .1F 2,000 megohms-microfarads 1,000,000 megohms 100,000 megohms-microfarads 50,000 megohms 5,000 megohm-microfarads 10,000 megohms 1,000 megohm-microfarads Capacitance MIL-PRF-83421/1E Barometric pressure (reduced): Method 105 of MIL-STD-202, condition D (100,000 feet). 125 percent of dc rated voltage applied. See MIL-PRF-83421 for voltage limitations. Vibration, random (optional): In accordance with MIL-PRF-83421 when ordered with the "-" replaced with "H" in the PIN. Immersion: Method 104 of MIL-STD-202, test condition C. DWV: Insulating sleeves: Greater than 4,000 volts, dc. Terminal to terminal: 200 percent of dc rated voltage. Terminals to case: 200 percent of dc rated voltage. IR: Insulating sleeves: 10,000 megohms, minimum. Terminal to terminal: Not less than 50 percent of initial requirement. Terminals to case: 5,000 megohms, minimum. C: Styles CRH01 through CRH05: Maximum of 0.25 percent. Styles CRH06 through CRH00: Maximum of 1.0 percent. DF: 0.15 percent. Moisture resistance: Method 106 of MIL-STD-202. DWV, IR, C, and DF: Same as for immersion. Low temperature life: In accordance with MIL-PRF-83421, except measurements shall be made at the following temperatures. t1 = +25C: Record initial capacitance, dissipation factor, and insulation resistance. t2 = - 65C: 48 hours, rated dc voltage applied. t3 = Maximum operating temperature: 2 hours rated dc voltage applied (allow for derating). t4 = +25C: Record capacitance, dissipation factor, and insulation resistance. Limits of change shall be as specified in table IV. TABLE IV. Post measurement limits. t1 to t4 Capacitance Dissipation factor Insulation resistance Styles CRH01 through CRH05 0.5% 0.15% maximum Within initial requirements 12 Styles CRH06 through CRH00 1.0% 0.15% maximum Within initial requirement MIL-PRF-83421/1E Resistance to soldering heat: Method 210 of MIL-STD-202, condition B. C: Maximum of 0.25 percent. Temperature coefficient: In accordance with MIL-PRF-83421. Capacitance shall be measured at the temperatures specified in table V. TABLE V. Capacitance changes. Temperature 1/ t3 to t2 t3 to t4 t3 to t1 or t5 1/ t1 t2 t3 t4 t5 Styles CRH01 through CRH05 -1.0% to +1.2% -2.5% to 0% .25% Styles CRH06 through CRH00 2.0% -2.5% to 0% .25% = +25C 3C = +125C 3C = +25C 3C = -55C +0C, -3C = +25C 3C Life (at +100C): Method 108 of MIL-STD-202. Accelerated condition: 140 percent of dc rated voltage. Rated condition: 100 percent of dc rated voltage. IR: Terminal to terminal: Not less than 33.3 percent of initial requirement. Terminals to case: 5,000 megohms, minimum. C: Styles CRH01 through CRH05: Maximum of 2.0 percent. Styles CRH06 through CRH00: Maximum of 5.0 percent. DF (at +25C) after life: Styles CRH01 through CRH05: 0.25 percent, maximum. Styles CRH06 through CRH00: 0.35 percent, maximum. AC conditioning: In accordance with MIL-PRF-83421. Test samples shall be in accordance with table VI. 13 MIL-PRF-83421/1E TABLE VI. AC conditioning test samples. DC rated voltage (volts) 30 50 100 200 400 Capacitance range (F) .001 to 22.0 .001 to 10.0 .001 to 10.0 .001 to 3.9 .001 to 2.0 Number samples 1/ 10 10 10 10 10 40 kHz At rated voltage or current in accordance with table I 1/ Samples shall include five of the lowest and five of the highest capacitance values manufactured during the previous 6 months. If only one capacitance value was manufactured, ten samples of that value shall be tested. Supersession information: For 30 volt units, PINs -283-, -284-, -285-, -286-, -287-, and -288- are hereby superseded. For similar, but not necessarily interchangeable items; see PINs -385-, -386-, -387-, -388-, -389-, and -390-. Marking: In accordance with MIL-PRF-83421. Part or Identifying Number (PIN): Consists of the basic number of this specification sheet with a dash number coded as shown in the following: M83421/01- 1 123 M Specification sheet number (Replace "-" with "H" for random vibration option) Single digit designating style (i.e., 1 = CRH01; 2 - CRH02; 3 = CRH03; 4 = CRH04; 5 = CRH05; 6 = CRH06; 7 = CRH07; 8 = CRH08; 9 = CRH09; and 0 = CRH00). Nonsignificant dash number from table I. Single letter designating FR level (M, P, R, and S). Packaging: Capacitors may be furnished in tape and reel packaging when so specified in the ordering data. APPLICATION NOTE: Styles CRH01 through CRH05 capacitors should be used where stringent conditions must be met. 14 MIL-PRF-83421/1E Changes from previous issue: The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Referenced documents: In addition to MIL-PRF-83421, this document also references the following: MIL-STD-202-104 MIL-STD-202-105 MIL-STD-202-106 MIL-STD-202-107 MIL-STD-202-108 MIL-STD-202-112 MIL-STD-202-210 MIL-STD-202-301 MIL-STD-202-302 MIL-STD-1276 Custodians: Army - CR Navy - EC Air Force - 85 DLA - CC NASA - NA Preparing activity: DLA - CC (Project 5910-2015-016) Review activities: Army - AR Navy - AS, MC, OS, SH Air Force - 19 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using ASSIST Online database at https://assist.dla.mil/. 15