総合カタログ
GENERAL PRODUCTS
Scope of Sumida products, General stipulations for coil use
INDEX PAGE
Specifications in this catalog are subject to change without notice. It is requested to confirm the specifications when ordering.
Any dimensions without tolerance is typical value.
Sumida declares that any ozone depleting substance is not used in the all coil manufacturing process.
We recommend to use resist to protect from solder bridge.
3
4
5
6
7
8
9 - 10
11
24 - 25
26
27
32
33
41
42
47
48
52
53
72 - 73
12 - 20
21 - 23
28 - 30
31
34 - 36
37 - 40
43
43
44
45 - 46
49 - 50
51
54 - 55
56
57 - 61
62
63
64
65
66
67
68
68
68
68
69
69
70
71
74-75
POWER INDUCTORS
L.P.F.COILS FOR DIGITAL AMP
INVERTER TRANSFORMERS
INVERTER UNIT
DC/DC CONVERTER TRANSFORMERS
SIGNAL COMMON MODE CHOKE COILS
ANTENNA/FILTER
For xDSL LINE TRANSFORMERS
GAS DISCHARGE TUBE
POWER INDUCTORS
INVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
CMCM104 CDEP125ME
CDH2D09(/S) CDH3D11(/S) CDSH3D11(/S)
CDRH8D38/A CDRH127C/A
CDR6D23MN CDR6D28MN CDR7D28MN CDR7D43MN
CDR10D48MN
CDRH4D16FB CDRH5D16F/LD CDPH4D19F CDRH6D26FB CDRH10D43F
CPUDL294 CEIDL318 CEIDL377 CEIDL369 EIDL369
CIUH11D66
CLS4D18 CLS4D28 CLS6D28
CLQ5D27 CLQ7D23
CPFC805 CPF6D36
CBM6068
AS737
CEP79
CPE1311C
CEP1311 EP1311
Switching Spark Gaps-
Sparctube
TM
NEW PRODUCTS
PRODUCTS
SMD TYPE
PIN TYPE
SMD TYPE
PIN TYPE
SMD TYPE
PIN TYPE
SIGNAL COMMON MODE CHOKE COILS
DC COMMON MODE CHOKE COILS
NORMAL MODE CHOKE COILS
AC COMMON MODE CHOKE COILS
ANTENNAS
For xDSL LINE TRANSFORMERS
For xDSL POTS SPLITTER COILS
For xDSL COMMON MODE CHOKE COIL
STB/FAX/MODEM TRANSFORMERS
LAN LINE TRANSFORMERS
10/100 BESE PULSE TRANSFORMERS
RADIO CONTROL CLOCK ANTENNAS
AUDIO/VIDEO FILTERS
IFT
RF COILS
QUADRATURE DETECTOR COILS
VCO COIL
HELICAL FILTER
ANTENNA LOADING COIL
MOLD COILS
BALUN
FIXED INDUTORS FOR TAPE RECORDER
VARIABLE INDUCTORS
Dimensions for embossed tape and reel packing with packed QTY
IV120307
CDEPI106 DEPI1615
2
INDEX
3
Scope of Sumida products, General stipulations for coil use
N Scope of Sumida products
1. Sumida components are manufactured and promoted for use in general AV electronics, home appliances, OAs,
communications, measurement equipments and machine tools.
2. In the event the product is used in aerospace equipment, medical equipment, transportation equipment, disaster
preventing equipment, or an equivalent which may affect human health or property, please do not fail to consult with
our business headquarters, branch or business office.
When the suggested recommendations are not heeded, Sumida Group shall not be held liable for any dysfunctious in
or damage to the equipment with which the product is used.
3. In the event a problem occurs which may affect industrial property and any other rights of Sumida Group (or a third
party) during the use of the product and information described in this catalog, Sumida Group shall not be held liable
for any such problem, nor grant any license to the offending party.
NGeneral stipulations for coil use
1. Products should not be kept in unsuitable storage conditions, such as areas susceptible to high temperatures, high
humidity, dust or corrosion.
2. Always handle products with care.
3. Don't touch electrodes directly with bare hands as oil secretions may inhibit soldering.
Always ensure optimum conditions for soldering.
4. Don't bend the terminals or subject them to excessive stress.
5. Please ensure that all terminals and case lugs are completely fixed with solder onto PCB.
6. Ensure the tuning slug or cap is not fixed by solder flux during the production process.
7. Refrain from rinsing coils. If necessary, please consult with our company.
8. Avoid placing coils near the edge of the PCB.
9. Our SMD coils are designed for automatic mounting. Please be careful if soldering by hand.
10. Don't touch any exposed winding part and avoid coming into contact with the guide of electrode in
automatic mounting.
11. Our specification limits the quality of the component as a single unit.
Please ensure the component is thoroughly evaluated in your application circuit.
12. When using our high voltage inverter transformers, place 2mm away from the electric conductor.
13. About Lead-free Products
・Lead-free products are now available for sale
・To order a lead-free product, please addNPafter the product type:
e.g. Ordering code of lead product: Type name-△△△○×
Ordering code of lead-free product: Type name NP△△△○×
4
POWER INDUCTORS
POWER INDUCTORS
Power Inductors <SMD Type>
By using the square wire, power inductors can de used for large
current with low profile and low resistance.
■OUTLINE
K DIMENSIONS(mm)
Min.0.01
10.0
11.5 Max.4.0
4.0
6.6
CMCM104
By using the square wire, power inductors can de used for large
current with low profile and low resistance.
※1: Saturation Rated Current:The current when the inductance becomes 20% lower than its intial value.
※2: Temperature Rise Current (Typ.):The actual current when temperature of coil becomes ΔT=40℃(Ta=20℃)
※1: Saturation Rated Current:The current when the inductance becomes 20% lower than its nominal value.
※2: Temperature Rise Current (Typ.):The actual current when temperature of coil becomes ΔT=40℃(Ta=20℃)
■OUTLINE
CDEP125ME K DIMENSIONS(mm) K LANDPATTERNS(mm)
K LANDPATTERNS(mm)
K SPECIFICATIONS
PartNo. D.C.R.(Ω)
Max.(Typ.)
SaturationRatedCurrent(A)
(at20℃)※1
TemperatureRiseCurrent(typ)
(A)
※2
CMCM104 0.36µH±20% 1.20m 37.0※1 27.0
Inductance
K SPECIFICATIONS
PartNo. D.C.R.(Ω)
Max.(Typ.)
SaturationRatedCurrent(A)
(at20℃)※1
TemperatureRiseCurrent(typ)
(A)
※2
CDEP12SMENP-0R3MC 0.3µH±25% 1.00m 40.0 21.0
CDEP12SMENP-0R7MC 0.7µH±25% 1.70m 32.0 20.0
CDEP12SMENP-1R2MC 1.2µH±25% 2.60m 25.6 17.5
CDEP12SMENP-2R0MC 2.0µH±25% 4.10m 20.4 13.5
CDEP12SMENP-2R9MC 2.9µH±25% 6.30m 16.0 11.5
Inductance
12.5±0.4
7.0±0.2
2.1±0.2
2.6±0.22.6±0.2
8.5±0.2
Max,5.5
12.5±0.4
10.0
4.0
2.3
8.2
13.5
4.5
63.8 3.8
About CMCM104, DCEP125ME
※This specification might be changed without notice due to under developing and improving. Thank you for your understanding.
5
POWER INDUCTORS
POWER INDUCTORS
Inductors for Low Profile
This is low profile type of power inductor for portable equipment.
It is suitable for a DC/DC converter power supply with height
restrictions.
■OUTLINE
K DIMENSIONS(mm)
1.2
1.2MAX.
3.4
2.2
3.4
3.5
2.0
1.4
1.11.1
CDSH3D11/S
CDSH3D11
K DIMENSIONS(mm)
2.7
2.7
1.2MAX. 3.0
1.0
1.15
0.7
K LANDPATTERNS(mm)
K LANDPATTERNS(mm)
K LANDPATTERNS(mm)
CDH3D11/S
CDH3D11
K DIMENSIONS(mm)
0.5
0.7
2.35
1.0MAX.
2.4
2.4 0.2
1.35
CDH2D09/S
CDH2D09
About CDH2D09/S CDH2D09, CDH3D11/S CDH3D11, CDSH3D11/S CDSH3D11
※This specification might be changed without notice due to under developing and improving. Thank you for your understanding.
K SPECIFICATIONS
PartNo. D.C.R.(Ω)
Max.(Typ.)
SaturationRatedCurrent(A)
(at20℃)
TemperatureRiseCurrent(typ)
(A)
※4
CDH2D09/S, CDH2D09 4.7µH 456m (380m) 380m※1 630m
CDH3D11/S, CDH3D11 4.7µH 504m (420m) 850m※2 560m
CDSH3D11/S, CDSH3D11 4.7µH 219m (175m) 660m※3 840m
※1: Saturation Rated Current:The current when the inductance becomes 25% lower than its nominal value.
※2: Saturation Rated Current:The current when the inductance becomes 10% lower than its initial value.
※3: Saturation Rated Current:The current when the inductance becomes 35% lower than its nominal value.
※4: Temperature Rise Current (Typ.):The actual current when temperature of coil becomes ΔT=40℃(Ta=20℃)
Inductance
6
POWER INDUCTORS
POWER INDUCTORS
The operating temperature range is a maximum of 125 degree,
and the inductance range is 10〜470uH.
It matches as power inductor for DC/DC converters
corresponding high temperature.
■OUTLINE
About CDRH8D38/A
※This specification might be changed without notice due to under developing and improving. Thank you for your understanding.
CDRH8D38/A
8.0
8.0
4.0MAX.
3.0
7.0
5.8
9.1
1.8
K DIMENSIONS(mm) K LANDPATTERNS(mm)
2.3
2.3
8.9
5.9
8.9
Solder Resist
CDRH127C/A
12.5
12.5
1.4 1.4
8.0MAX.
18.2MAX.
10.8
3.0
K DIMENSIONS(mm) K LANDPATTERNS(mm)
45˚
17.0
10.5
4.0
Inductors Corresponding High Temperature
K InductanceRange
CDRH8D38/A : 10µH-100µH
CDRH127C/A : 10µH-470µH
CDRH8D38/A
K Characteristics
Idc (A)
1
10
100
1,000
0.0 0.5 1.0 1.5 2.0 2.5 3.0
Ls ( uH )
100µH
33µH
10µH
Saturation Current
00.511.5 2 2.5 3 3.5 4
Idc (A)
0
10
20
30
40
50
60
70
Delta T ( °c)
33µH
10µH
100µH
Temperature Rise
CDRH127C/A
Idc (A)
1
10
100
1,000
012345678910
Ls ( uH )
100µH
33µH
10µH
Saturation Current
0
10
20
30
40
50
60
70
80
90
100
012345678910
Idc (A)
Delta T ( °c)
100µH
33µH
10µH
Temperature Rise
7
POWER INDUCTORS
POWER INDUCTORS
K DIMENSIONS(mm)
6.5
1.0
0.9
6.5
2.5MAX.
R2.7
3.0
1.7
K LANDPATTERNS(mm)
C1.0
R2.4
2.5
2.5 3.5
4.0
The combination of the Mn ferrite core and the Ni ferrite core
achieves the large current and the smaller volume approximately
18% as compared to previous type.
The series has the foot print lineup of 6 mm, 7 mm, and 10 mm
square, so the lineup matches power supplies for potable PCs,
DVCs, DSCs, LCD-TVs, and low profile type on-board power
supplies.
■OUTLINE
CDR6D23MN
K DIMENSIONS(mm)
6.5
1.0
0.9
6.5
3.0MAX.
R2.7
3.0
1.7
K LANDPATTERNS(mm)
C1.0
R2.4
2.52.5 3.5
4.0
CDR6D28MN
K DIMENSIONS(mm)
3.0MAX.
3.5
1.7
1.3
R3.0
1.3
7.3
7.3
K LANDPATTERNS(mm)
R2.75
C1.1
4.0
2.7 4.2 2.7
CDR7D28MN
K DIMENSIONS(mm)
7.3
7.3
4.5MAX.
3.5
1.3
R3.0
1.3
1.7
K LANDPATTERNS(mm)
R2.75
C1.1
4.0
4.2 2.7
CDR7D43MN
Hybrid Power Inductors
8
POWER INDUCTORS
POWER INDUCTORS
K DIMENSIONS(mm)
10.0
10.0
1.9
1.7
5.0MAX.
R4.1
4.5
2.1
K LANDPATTERNS(mm)
3.5 6.0 3.5
6.0
C1.4
R3.7
CDR7D28MN
CDRH8D28
Hybrid Power Inductor
Previous Type
0.0
2.0
4.0
6.0
8.0
10.0
12.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
D.C. Current:
Saturation Current
I(A)
Inductance: L(uH)
About CDR10D48MN
※This specification might be changed without notice due to under developing and improving. Thank you for your understanding.
CDR10D48MN
K InductanceRange
CDR6D23MN : 2.0µH - 100µH
CDR6D28MN : 1.5µH - 120µH
CDR7D28MN : 1.2µH - 470µH
CDR7D43MN : 3.7µH - 100µH
CDR10D48MN : 2.4µH - 120µH
※Mesurement frequency of inductance : at 100kHz
Hybrid Power Inductors
9
POWER INDUCTORS
POWER INDUCTORS
Double Flat Winding Inductors
It is suitable for the power inductor for chopper circuit of DC/DC
converters for the power supply of portable equipment.
Having adopted double flat winding technology, it is a product
which corresponds to a low profile power supply model with lower
DCR demand for DVC.e.t.c.
■OUTLINE
K DIMENSIONS(mm)
1.8MAX.5.5MAX.
5.5MAX.
1.4
4.2
6.7MAX.
K LANDPATTERNS(mm)
8.0
3.8
2.1
1.8
CDRH5D16F/LD
K DIMENSIONS(mm)
4.0
4.0
5.2MAX.
3.1
4.4
1.8MAX.
1.1
K LANDPATTERNS(mm)
1.4
1.1
2.8
5.0
CDRH4D16FB
K DIMENSIONS(mm)
10.0
10.0
5.0
4.5MAX. 6.2 1.7
K LANDPATTERNS(mm)
5.0
6.0
11.0
CDRH10D43F
K DIMENSIONS(mm)
1.4
5.0
5.9MAX.
3.6
2.0MAX.
5.2MAX.
5.2MAX.
6.6
6.6
2.0
9.5MAX.
2.8MAX.
7.0MAX.
7.0MAX.
ø5.4
K LANDPATTERNS(mm)
CDPH4D19F
K DIMENSIONS(mm) K LANDPATTERNS(mm)
CDRH6D26FB
10
POWER INDUCTORS
POWER INDUCTORS
K InductanceRange
Double Flat Winding Inductors
About CDRH4D16FB, CDRH10D43F
※This specification might be changed without notice due to under developing and improving. Thank you for your understanding.
K CDRH4D16FB:SaturationCurrent
0.0
0.0
2.0
4.0
6.0
8.0
10.0
12.0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
10µH
4.7µH
D.C.Current:I(A)
Inductance:L(µH)
K CDRH5D16F/LD:SaturationCurrent
0.0
0.0
2.0
4.0
6.0
8.0
10.0
12.0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
10µH
4.7µH
D.C.Current:I(A)
Inductance:L(µH)
K CDPH4D19F:SaturationCurrent
0.0
0.0
2.0
4.0
6.0
8.0
10.0
12.0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
10µH
4.7µH
D.C.Current:I(A)
Inductance:L(µH)
K CDRH10D43F:SaturationCurrent
0.0
0.0
2.0
4.0
6.0
8.0
10.0
12.0
2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0
10µH
4.7µH
D.C.Current:I(A)
Inductance:L(µH)
CDRH4D16FB : 4.7µH - 33µH
CDRH5D16F/LD : 2.2µH - 47µH
CDPH4D19F : 3.3µH - 47µH
CDRH6D26FB : 2.2µH - 22µH
CDRH10D43F : 4.7µH - 33µH
11
POWER INDUCTORS
POWER INDUCTORS
It is the inductor for LPF used in the digital amplifier featuring with
higher efficiency and lower heat generation.
It is a product which corresponds to the demand of SMD type and
smaller foot print (two in one type LPF) for 1 speaker.
Applications are car audios, 5.1ch home theater sets and large
LCDs.
■OUTLINE
L.P.F Coils for Digital AMP
CDEPI106 K DIMENSIONS(mm)
11.0 10.5MAX. 7.2 1.8
11.0
3.7
2.2
K LANDPATTERNS(mm)
K SPECIFICATIONS
PartNo. Stamp
Inductance
〈WITHIN〉※1
(1-2),(4-3)
D.C.R.(mΩ)
Max.(Typ)※2
(1-2),(4-3)
SaturationRatedCurrent(A)
※3
(at 20°C) (at 105°C)
TemperatureRiseRatedCurrent
(A)
※4
CDEPI106NP-100 100 10µH±25% 28.8(23) 4.9 4.5 4.0
CDEPI106NP-150 150 15µH±25% 28.8(23) 3.5 3.0 4.0
CDEPI106NP-220 220 22µH±30% 28.8(23) 2.2 1.9 4.0
※1: Mesurement frequency of inductance : at 100kHz
※2:（）is typical value.
※3: Saturation Rated Current : It indicates the D.C. current value when inductance value become more than 75% of the nominal one.
※4: The Temperature Rise Rated Current : The value of D.C. current when temperature rise is ∆t=40˚C (Ta=20˚C).
About DEPI1615
※This specification might be changed without notice due to under developing and improving. Thank you for your understanding.
K SPECIFICATIONS
PartNo. Stamp
Inductance
〈WITHIN〉
※1
(1-2),(4-3)
D.C.R.(mΩ)
※2
(1-2),(4-3)
SaturationRatedCurrent(A)
※3
(at 20°C) (at 105°C)
TemperatureRiseRatedCurrent
(A)
※4
DEPI1615-100 100 10µH±20% 14.8 (12.3) 9.6 7.6 8.5
DEPI1615-150 150 15µH±20% 20.6 (17.2) 8.4 6.5 6.0
DEPI1615-220 220 22µH±20% 29.0 (24.2) 6.8 5.3 4.3
※1: Mesurement frequency of inductance : at 100kHz
※2:（）is typical value.
※3: Saturation Rated Current : It indicates the D.C. current value when inductance value become more than 75% of the nominal one.
※4: The Temperature Rise Rated Current : The value of D.C. current when temperature rise is ∆t=40˚C (Ta=20˚C).
K DIMENSIONS(mm)
6.8 2.6
2.5
3.4
18.1±0.3
16.9±0.3
14.2±0.3 3.2
2.8
0.7
7.4±0.2
10.4±0.2
0.6
4.0
DEPI1615
12
POWER INDUCTORS
POWER INDUCTORS
4.8±0.2
4.8±0.2
MAX 2.0
0.05+0.10
-
0.05
5.2±0.2
1.0±0.1
0.8±0.2 0.8±0.2
POWER INDUCTORS
0.8MAX.
6.3MAX.
0.5
5.8MAX.
4.3
3.2
0.4
3.5 4.1
Inductance : 2.2µH – 47µH
D.C.R. : 116mΩ– 2.84Ω
Rated Current : 180mA – 950mA
CMD4D06
1.0MAX.3.5 4.1
0.5
5.8MAX.
4.3
3.2
0.4
6.3MAX.
Inductance : 3.3µH – 100µH
D.C.R. : 160mΩ– 3.3Ω
Saturation Rated Current : 210mA – 1.2A
Temperature Rise Rated Current
: 170m
A –
850m
A
CMD4D08
5.8MAX.
4.3
0.5
2.9
3.74.4MAX.
3.5
3.2
1.2MAX.
Inductance : 2.2µH – 47µH
D.C.R. : 116mΩ– 2.84Ω
Rated Current :
180mA – 950mA
CMD4D11
0.5
2.9
3.7
3.5
4.4MAX.
3.2
1.45MAX.
5.8MAX.
4.3
Inductance : 3.3µH – 150µH
D.C.R. : 160mΩ– 5.36Ω
Saturation Rated Current :
180mA – 1.2A
Temperature Rise Rated Current
: 130m
A –
850m
A
CMD4D13
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
4.5
0.6
4.2
5.5
1.2MAX.
7.4MAX.
6.0
5.2
5.8MAX.
Inductance : 3.3µH – 100µH
D.C.R. : 109mΩ– 2.8Ω
Saturation Rated Current :
200mA – 940mA
Temperature Rise Rated Current : 200mA – 1.16A
CMD5D11
4.5
0.6
4.2
5.5
1.5MAX.
7.4MAX.
6.0
5.8MAX.
Inductance : 3.3µH – 47µH
D.C.R. : 81mΩ– 875mΩ
Saturation Rated Current : 550
mA –
1.9
A
Temperature Rise Rated Current : 350mA – 1.25A
CMD5D13
1.2MAX.
6.8
1.0
4.0
5.5
7.8MAX.
6.8
6.8
14
23
Inductance : 4.7µH – 150µH
D.C.R. : 100mΩ– 3.1Ω
Saturation Rated Current : 210
mA –
1.3
A
Temperature Rise Rated Current
: 180m
A –
1.4
A
CMD6D11B
Inductance : 100µH – 4.7mH
D.C.R. : 1.77Ω– 72.1Ω
Rated Current : 35mA – 230mA
CDC4D20
13
POWER INDUCTORS
POWER INDUCTORS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
POWER INDUCTORS
6.5
0.9
4.2
5.3
6.0
0.8
1.2
2.0
1.2MAX.
0.5
Inductance : 1.0µH – 33µH
D.C.R. : 40mΩ– 784mΩ
Saturation Rated Current : 400m
A –
2.2
A
Temperature Rise Current (Typ) : 450mA – 2.8A
CR5D11
3.43.5MAX.
4.3MAX.
2.1
4.8MAX.
Inductance : 1.0µH – 68µH
D.C.R. : 48.7mΩ– 1.12Ω
Rated Current : 370mA – 2.56A
CR43
5.8
(1.4)
2.5
6.1MAX.
4.7
4.85MAX.
5.6MAX.
Inductance : 2.2µH – 220µH
D.C.R. : 23.4mΩ– 1.57Ω
Rated Current : 350mA – 3.84A
CR54
7.8
(2.4)
4.3
8.1MAX.
4.7
5.5MAX.
7.3MAX.
Inductance : 1.2µH – 470µH
D.C.R. : 15.6mΩ– 1.96Ω
Rated Current : 340mA – 6.0A
CR75
3.8MAX.
3.1
2.0
3.0MAX.4.1MAX.
2.3
Inductance : 10µH – 390µH
D.C.R. : 230mΩ– 7.8Ω
Rated Current : 115mA – 760mA
CR32
2.2
1.2
6.0MAX.
0.8
2.5MAX.6.0MAX.
Inductance : 2.2µH – 270µH
D.C.R. : 39mΩ– 2.73Ω
Rated Current : 190mA – 2.16A
CDC5D23
4.0MAX.
10.4MAX. 7.6
10.4MAX.
6.0
Inductance : 2.7µH – 680µH
D.C.R. : 34.5mΩ– 2.55Ω
Saturation Rated Current : 350mA – 5.7A
Temperature Rise Rated Current : 330mA – 2.65A
CR10D37
14
POWER INDUCTORS
POWER INDUCTORS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
POWER INDUCTORS
3.2MAX.
3.2MAX.
2.0MAX.
4.5MAX.
3.3
2.1
1.0
Inductance : 2.2µH – 47µH
D.C.R. : 41mΩ– 660mΩ
Saturation Rated Current : 200mA – 850mA
Temperature Rise Current (Typ) : 480mA – 2.3A
CDRH2D18/LD
4.5MAX.
3.3
3.2MAX.
3.2MAX.
2.0MAX.
2.1
1.0
Inductance : 1.7µH – 15µH
D.C.R. : 44mΩ– 345mΩ
Saturation Rated Current : 700m
A –
1.85
A
Temperature Rise Current (Typ) : 640mA – 2.2A
CDRH2D18/HP
1.55MAX.
4.5MAX.
3.3
1.0
3.0
3.0
ø2.1
Inductance : 1.5µH – 12µH
D.C.R. : 63mΩ– 394mΩ
Saturation Rated Current : 620m
A –
1.8
A
Temperature Rise Current (Typ) : 640mA – 2.0A
CDRH2D14
3.3
0.7
1.0
1.0MAX.
3.0
3.0
ø2.1
Inductance : 1.2µH – 10µH
D.C.R. : 97.5mΩ– 537.5mΩ
Saturation Rated Current : 280mA – 800mA
Temperature Rise Current (Typ) : 420mA – 1.24A
CDRH2D09
3.0
3.0
1.2MAX.
4.5MAX.
3.3
ø2.1
1.0
Inductance : 1.5µH – 10µH
D.C.R. : 68mΩ– 400mΩ
Saturation Rated Current : 350mA – 900mA
Temperature Rise Current (Typ) : 650mA – 1.48A
CDRH2D11
10.4MAX.
7.65.8MAX.
9.5MAX.
5.9
Inductance : 1.8µH – 820µH
D.C.R. : 13.0mΩ– 2.55Ω
Rated Current : 240mA – 6.0A
CR105
3.2MAX.
3.2MAX.
1.2MAX.
3.3
ø2.1
1.1
4.5MAX.
Inductance : 1.5µH – 10µH
D.C.R. : 80mΩ– 559mΩ
Saturation Rated Current : 520mA – 1.35A
Temperature Rise Current (Typ) : 520mA – 1.6A
CDRH2D11/HP
3.8
3.8
1.2MAX.
1.4MAX.
1.1
5.2MAX.
4.4
Inductance : 2.7µH – 39µH
D.C.R. : 84.5mΩ– 1.02Ω
Saturation Rated Current : 140mA – 530mA
Temperature Rise Current (Typ) : 400mA – 1.82A
CDRH3D11
15
POWER INDUCTORS
POWER INDUCTORS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
POWER INDUCTORS
4.0MAX.
4.0MAX.
1.8MAX.
4.4
5.2MAX.
1.1
1.4MAX.
ø2.8
Inductance : 1.7µH – 33µH
D.C.R. : 51mΩ– 870mΩ
Saturation Rated Current : 460mA – 2.0A
Temperature Rise Current (Typ) : 410mA – 2.4A
CDRH3D16/HP
ø2.8
4.4
1.1
4.0MAX.
4.0MAX. 3.0MAX.
Inductance : 3.3µH – 47µH
D.C.R. : 72.1mΩ– 599mΩ
Saturation Rated Current : 480m
A –
2.0
A
Temperature Rise Current (Typ) : 560mA – 1.85A
CDRH3D28
4.0MAX. 3.0MAX.
4.4
1.1
4.0MAX.
Inductance : 10µH – 220µH
D.C.R. : 95mΩ– 1.27Ω
Saturation Rated Current : 116mA – 500mA
Temperature Rise Current (Typ) : 360mA – 1.52A
CDRH3D28/LD
4.6
1.0
3.3
5.4
1.0MAX.
4.6
Inductance : 4.7µH – 22µH
D.C.R. : 185mΩ– 910mΩ
Saturation Rated Current : 350m
A –
800m
A
Temperature Rise Rated Current : 300mA – 750mA
CLS4D09
4.6
4.6
1.2MAX.
1.0
3.3
5.4
Inductance : 3.3µH – 33µH
D.C.R. : 120mΩ– 1.1Ω
Rated Current : 300
mA –
1.0
A
CLS4D11
1.8MAX.
4.0MAX.
4.0MAX.
1.1
4.4
1.4MAX.
5.2MAX.
Inductance : 3.3µH – 47µH
D.C.R. : 66mΩ– 775mΩ
Saturation Rated Current : 210mA – 800mA
Temperature Rise Current (Typ) : 450mA – 2.0A
CDRH3D16/LD
1.8MAX.
4.0MAX.
4.0MAX.
1.1
4.4
1.4MAX.
5.2MAX.
Inductance : 1.5µH – 33µH
D.C.R. : 52mΩ– 675mΩ
Rated Current :
320mA – 1.55A
CDRH3D16
1.5MAX.
4.0MAX.
4.0MAX.
4.4
1.1
1.4MAX.
5.2MAX.
φ2.8
Inductance : 1.5µH – 22µH
D.C.R. : 76mΩ– 830mΩ
Saturation Rated Current : 650mA – 2.6A
Temperature Rise Current (Typ) : 480mA – 1.85A
CDRH3D14/HP
16
POWER INDUCTORS
POWER INDUCTORS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
POWER INDUCTORS
5.85
5.85
1.2MAX.
1.5
4.5
6.5
Inductance : 4.7µH – 47µH
D.C.R. : 120mΩ– 930mΩ
Saturation Rated Current : 380
mA –
1.1
A
Temperature Rise Rated Current : 350mA – 1.1A
CLS5D11
5.1MAX.
5.1MAX.
2.0MAX.
1.4
6.2MAX.
4.4
Inductance : 1.1µH – 100µH
D.C.R. : 24mΩ– 962mΩ
Saturation Rated Current : 200m
A –
2.1
A
Temperature Rise Rared Current : 350mA – 3.5A
CDRH4D18C/LD
4.5
4.5
1.5
6.9MAX.
2.4MAX.
5.0MAX.
5.0MAX.
Inductance : 1.5µH – 150µH
D.C.R. : 18.3mΩ– 1.35Ω
Saturation Rated Current : 210m
A –
2.0
A
Temperature Rise Current (Typ) : 470mA – 4.2A
CDRH4D22
4.5
3.0MAX.
6.9MAX.
5.0MAX.
1.5
4.5
5.0MAX.
Inductance : 1.2µH – 180µH
D.C.R. : 23.6mΩ– 1.54Ω
Rated Current : 220mA – 2.56A
CDRH4D28
4.6
4
3
1
2
4.6
1.5MAX.
5.4
3.3
1.0
Inductance : 4.7µH – 47µH
D.C.R. : 110mΩ– 830mΩ
Saturation Rated Current :
300
mA –
900
mA
Temperature Rise Rated Current : 330mA – 1.0A
CLS4D14
5.1MAX.
5.1MAX.
2.0MAX.
6.2MAX.
1.4
4.4
Inductance : 1.1µH – 100µH
D.C.R. : 29mΩ– 1.51Ω
Rated Current : 250mA – 2.4A
CDRH4D18C
4.5
2.0MAX.5.0MAX.
1.5
4.5
5.0MAX.
6.9MAX.
Inductance : 1.0µH – 180µH
D.C.R. : 45mΩ– 4.0Ω
Rated Current : 140mA – 1.72A
CDRH4D18
4.8MAX 1.5MAX
4.8MAX
5.2
1.2
3.3
Inductance : 4.7µH – 10µH
D.C.R. : 140mΩ– 280mΩ
Saturation Rated Current :
950
mA –
1.4
A
Temperature Rise Rared Current : 750mA – 1.1A
CDRH4D14/HP
17
POWER INDUCTORS
POWER INDUCTORS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
POWER INDUCTORS
6.5
6.5
2.0
9.5MAX.
2.8MAX.
7.0MAX.
7.0MAX.
ø5.4
Inductance : 2.2µH – 100µH
D.C.R. : 22mΩ– 560mΩ
Rated Current :
500mA – 3.2A
CDRH6D26
5.7MAX.
5.1MAX.
0.5
1.5
7.6MAX.
2.0MAX.
1.25 0.55
(0.83) 5.93 (0.83)
Inductance : 2.2µH – 330µH
D.C.R. : 81mΩ– 7.15Ω
Rated Current :
70mA – 1.36A
CLQ61
5.7MAX.
5.1MAX.
0.5
1.5
7.6MAX.
2.0MAX.
1.25 0.55
(0.83) 5.93 (0.83)
Inductance : 2.2µH – 330µH
D.C.R. : 81mΩ– 7.15Ω
Rated Current :
70mA – 1.36A
CLQ61B
6.5
9.5MAX.
7.0MAX.
2.0
6.5
3.0MAX.
7.0MAX.
ø5.4
Inductance : 3.0µH – 100µH
D.C.R. : 24mΩ– 535mΩ
Rated Current : 540mA – 3.0A
CDRH6D28
2.0
0.6 4.7
8.2MAX.
6.3MAX.
3.0MAX.
6.2MAX.
Inductance : 2.5µH – 100µH
D.C.R. : 17.6mΩ– 520mΩ
Rated Current : 400
mA –
2.6
A
CDRH5D28R
1.5MAX.
2.0
5.0
6.8
6.7MAX.
6.7MAX.
Inductance : 1.0µH – 68µH
D.C.R. : 37.5mΩ– 920mΩ
Saturation Rated Current : 450m
A –
3.5
A
Temperature Rise Current (Typ) : 400mA – 2.8A
CDRH6D12
2.0MAX. 5.5
6.0MAX.
5.5
2.0
6.0MAX.
8.2MAX.
ø4.6
Inductance : 4.1µH – 100µH
D.C.R. : 57mΩ– 1.2Ω
Rated Current : 360mA – 1.95A
CDRH5D18
5.5
6.0MAX. 3.0MAX.
2.0
5.5
6.0MAX.
8.2MAX.
ø4.6
Inductance : 2.5µH – 100µH
D.C.R. : 18mΩ– 520mΩ
Rated Current : 420mA – 2.6A
CDRH5D28
18
POWER INDUCTORS
POWER INDUCTORS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
POWER INDUCTORS
3.0
4.0MAX.
10.3MAX.
1.2
10.5MAX.
7.7
13.5MAX.
Inductance : 1.5µH – 330µH
D.C.R. : 8.1mΩ– 1.09Ω
Saturation Rated Current : 700m
A –
10.0
A
Temperature Rise Rated Current : 520mA – 6.5A
CDRH104R
1.2 7.7
3.0
3.1MAX.
10.3MAX.
10.5MAX.
13.5MAX.
Inductance : 0.8µH – 150µH
D.C.R. : 5.7mΩ– 871mΩ
Saturation Rated Current : 840m
A –
11.2
A
Temperature Rise Rated Current : 510mA – 8.3A
CDRH103R
4.7MAX. 6.3 1.2
8.0
8.0
2.5
Inductance : 1.2µH – 68µH
D.C.R. : 16.5mΩ– 363mΩ
Saturation Rated Current : 1.6
A –
12.6
A
Temperature Rise Current (Typ) : 800mA – 5.6A
CDRH8D43/HP
6.0MAX. 1.2
2.5
6.3
8.0
8.0
Inductance : 2.8µH – 100µH
D.C.R. : 15mΩ– 175mΩ
Saturation Rated Current : 800m
A –
4.7
A
Temperature Rise Current (Typ)
: 1.4
A –
6.9
A
CDRH8D58/LD
8.3MAX. 6.3 1.2
4.5MAX.
8.3MAX.
2.5
Inductance : 2.0µH – 100µH
D.C.R. : 14mΩ– 360mΩ
Saturation Rated Current : 1.3
A –
7.0
A
Temperature Rise Rated Current : 800mA – 5.5A
CDRH8D43
9.5MAX.
7.0MAX. 6.5
4.0MAX.
2.0
6.5
7.0MAX.
ø5.4
Inductance : 3.3µH – 100µH
D.C.R. : 20mΩ– 358mΩ
Rated Current : 650mA – 3.5A
CDRH6D38
2.5
4.0MAX.
8.3MAX. 6.3 1.2
8.3MAX.
Inductance : 1.8µH – 100µH
D.C.R. : 15.6mΩ– 410mΩ
Saturation Rated Current : 1.05
A –
7.0
A
Temperature Rise Current (Typ) : 880mA – 6.8A
CDRH8D38
8.3MAX. 6.3 1.2
3.0MAX.
8.3MAX.
2.5
Inductance : 2.5µH – 100µH
D.C.R. : 15.6mΩ– 430mΩ
Saturation Rated Current : 750m
A –
4.5
A
Temperature Rise Current (Typ) : 800mA – 6.4A
CDRH8D28
19
POWER INDUCTORS
POWER INDUCTORS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
POWER INDUCTORS
10.4MAX. 5.6MAX. 3.82.9
10.4MAX.
1.4
5.5
2.62.6
Inductance : 0.15µH – 8.8µH
D.C.R. : 1.7mΩ– 23.8mΩ
Saturation Rated Current : 4.8A – 55.0A
Temperature Rise Current (Typ) : 4.9A – 19.0A
CDEP105
8.0MAX.
4.0
5.0MAX. 1.8
3.0MAX.
Inductance : 80nH – 120nH
D.C.R. : Max. 1.7mΩ
Rated Current : 15.0A
Inductance : 100µH
D.C.R. : Max 0.9mΩ
Saturation Rated Current :
24.0A
Temperature Rise Current (Typ) : 22.5A
CDBM7D28
12.3MAX. 5.0
7.6
12.0
12.3MAX.
8.0MAX.
Inductance : 1.2µH – 1.0mH
D.C.R. : 7.0mΩ– 1.82Ω
Rated Current : 550mA – 9.8A
CDRH127
12.3MAX. 5.0
7.6
12.0
12.3MAX.
8.0MAX.
Inductance : 1.0µH – 1.0mH
D.C.R. : 6.5mΩ– 1.50Ω
Rated Current : 700mA – 14.0A
CDRH127/LD
CDBM73MN
3.3MAX. 1.8
4.0
5.0MAX.
8.5MAX.
5.0
11.8
7.6
6.0MAX.
0.2
12.3MAX.
12.3MAX.
Inductance : 1.3µH – 1.0mH
D.C.R. : 12mΩ– 1.53Ω
Rated Current : 400mA – 8.0A
CDRH125
5.0
11.8
7.6
4.5MAX. 0.2
12.3MAX.
12.3MAX.
Inductance : 3.9µH – 330µH
D.C.R. : 15mΩ– 990mΩ
Rated Current : 500mA – 6.5A
CDRH124
7.71.2
3.05.1MAX.10.3MAX.
10.5MAX.
13.5MAX.
Inductance : 0.8µH – 1.0mH
D.C.R. : 4.3mΩ– 2.0Ω
Saturation Rated Current : 420m
A –
9.5
A
Temperature Rise Rated Current : 480mA – 13.5A
CDRH105R
20
POWER INDUCTORS
POWER INDUCTORS
14.9MAX.
14.9MAX. 6.0MAX. 10.2
2.5
2.62.6 9.0
Inductance : 0.56µH – 6.1µH
D.C.R. : 1.7mΩ– 10.8mΩ
Saturation Rated Current : 10.4A – 36.0A
Temperature Rise Current (Typ) : 9.5A – 23.0A
CDEP145
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
POWER INDUCTORS
Inductance : 0.7µH – 9.5µH
D.C.R. : 1.86mΩ– 11.23mΩ
Saturation Rated Current : 11.2A – 36.0A
Temperature Rise Current (Typ) : 8.5A – 21.0A
CDEP147
9.6
2.5
2.6 2.6
7.2
4.9MAX.
13.9MAX.
13.9MAX.
Inductance : 0.3µH – 8.0µH
D.C.R. : 1.9mΩ– 18.4mΩ
Saturation Rated Current : 7.2A – 35.0A
Temperature Rise Current (Typ) : 6.5A – 18.5A
CDEP134(H)
15.2MAX.
15.2MAX.
14.6 2.0
0.15
10.0MAX.
9.0
4.9
2.4
4.3
10.6 2.02.0
Inductance : 0.45µH – 3.0µH
D.C.R. : 1.1mΩ– 2.3mΩ
Saturation Rated Current : 12.4A – 32.0A
Temperature Rise Current (Typ) : 28.0A – 35.0A
CDEP149(H)
10.5
2.6±0.2
2.1±0.2
2.6±0.29.0
Max.8.0
14.5±0.4
14.5±0.4
4.24.0
5.6MAX.
12.9MAX.
2.6
7.0
2.5
2.6
12.9MAX.
Inductance : 0.35µH – 10.0µH
D.C.R. : 1.5mΩ– 13.5mΩ
Saturation Rated Current : 5.0A – 35.0A
Temperature Rise Current (Typ) : 7.6A – 19.5A
CEP125(H,U)
10.6
8.9
9.2
3.5MAX.
12.8MAX.
12.8MAX.
1.70 1.60
Inductance : 1.2µH – 8.0µH
D.C.R. : 5.83mΩ– 23.0mΩ
Rated Current : 4.0A – 10.0A
CEP123
1.61.6
3.0MAX.
12.8MAX.
12.8MAX.
9.8
Inductance : 0.7µH – 22µH
D.C.R. : 10.7mΩ– 85.0mΩ
Saturation Rated Current : 2.3A – 17.0A
Temperature Rise Current (Typ) : 2.3A – 6.6A
CEI122(H)
21
POWER INDUCTORS
POWER INDUCTORS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
POWER INDUCTORS
ø8.3MAX. 7.5MAX. 5.0
ø0.7
5.0
Inductance : 2.2µH – 10mH
D.C.R. : 13.7mΩ– 33.0Ω
Saturation Rated Current : 84mA – 5.8A
Temperature Rise Rated Current : 54mA – 3.0A
RCH-875
5.0
ø8.3MAX. 7.5MAX. 5.0
ø0.7
Inductance : 1.2µH – 10mH
D.C.R. : 18mΩ– 35.0Ω
Rated Current : 74mA – 4.14A
RCR-875D
ø8.3MAX. 9.5MAX. 5.0
ø0.7
5.0
Inductance : 2.5µH – 47mH
D.C.R. : 13.7mΩ– 96.4Ω
Saturation Rated Current : 38mA – 5.0A
Temperature Rise Rated Current : 31mA – 3.2A
RCH-895
10.8MAX. 5.0
ø0.7
5.0
ø7.8
ø8.3MAX.
Inductance : 10µH – 1.0mH
D.C.R. : 35mΩ– 1.92Ω
Saturation Rated Current : 490mA – 4.4A
Temperature Rise Current (Typ) : 470mA – 4.1A
RCH8011
6.5MAX. 4.0ø6.5MAX.
4.0
ø0.5
Inductance : 2.7µH – 1.0mH
D.C.R. : 42mΩ– 5.56Ω
Rated Current : 140mA – 2.42A
RCR-664D
ø8.3MAX. 5.5MAX. 5.0
ø0.7
5.0
Inductance : 2.5µH – 10mH
D.C.R. : 23mΩ– 55.7Ω
Saturation Rated Current : 81mA – 4.5A
Temperature Rise Rated Current : 37mA – 3.1A
RCH-855
6.5MAX. 4.0ø6.5MAX.
4.0
ø0.5
Inductance : 1.0µH – 1.0mH
D.C.R. : 18.3mΩ– 4.45Ω
Rated Current : 190mA – 4.0A
RCH-664
4.05.0MAX.ø6.5MAX.
4.0
ø0.5
Inductance : 1.0µH – 1.0mH
D.C.R. : 29mΩ– 7.06Ω
Rated Current : 130mA – 3.0A
RCH-654
22
POWER INDUCTORS
POWER INDUCTORS
POWER INDUCTORS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
5.0
ø10.5MAX.
ø0.7
3.5 4.0
8.5MAX.
Inductance : 2,2µH – 1.0mH
D.C.R. : 8.5mΩ– 2.1Ω
Rated Current : 450mA – 7.9A
RCH-108
3.5
5.0
4.0
ø10.5MAX. 6.5MAX.
ø0.7
Inductance : 1.0µH – 1.0mH
D.C.R. : 5.0mΩ– 3.2Ω
Rated Current : 360mA – 9.3A
RCH-106
8.5MAX. 3.5ø10.5MAX.
ø0.7
5.0
4.0
Inductance : 1.0µH – 1.0mH
D.C.R. : 6.5mΩ– 2.3Ω
Rated Current : 280mA – 9.15A
RCR-108D
ø16.5MAX.
ø0.8
5.0
7.5
16.5MAX.
Inductance : 4.7µH – 1.0mH
D.C.R. : 6.7mΩ– 665mΩ
Saturation Rated Current : 850mA – 12.6A
Temperature Rise Rated Current : 930mA – 9.2A
RCR1616
ø0.7
5.0 14.4MAX.
5.0
ø10.5MAX.
Inductance : 6.3µH – 39mH
D.C.R. : 26mΩ– 58Ω
Rated Current : 90mA – 4.3A
RCH-114
5.0
7.5
ø0.7
15.0MAX.
ø13.0MAX.
Inductance : 10µH – 33µH
D.C.R. : 19mΩ– 70mΩ
Saturation Rated Current : 4.5A – 8.1A
Temperature Rise Rated Current : 2.3A – 4.5A
RP1315
ø0.7
5.0
4.0
ø10.5MAX. 3.510.5MAX.
Inductance : 10µH – 1.0mH
D.C.R. : 23mΩ– 1.5Ω
Rated Current : 350mA – 3.51A
RCR-110D
ø0.7
5.0
ø10.5MAX. 3.510.5MAX.
4.0
Inductance : 10µH – 1.0mH
D.C.R. : 22mΩ– 1.7Ω
Rated Current : 530mA – 5.3A
RCH-110
23
FIXED INDUCTORS
FIXED INDUCTORS
FIXED INDUCTORS
5.0
ø8.3MAX.
7.5MAX. 5.0 11.5MAX.
ø0.7
Inductance : Max. 47mH
Operating Freq. : Max. 1MHz
RC-875
Molded case type
Excellent maximum allowable DC current characteristics
5.0
ø7.3MAX.
ø0.5
5.08.6MAX.
Inductance : Max. 6.8mH
Operating Freq. : Max. 1MHz
RX-7P
Magnetically shielded type
5.0
ø8.5MAX.
ø0.7
3.0
13.0MAX.
Inductance : Max. 33mH
Operating Freq. : Max. 1MHz
RX-8P
Magnetically shielded type
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
24
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
CEIDL369 K DIMENSIONS(mm) K LANDPATTERNS(mm)
29.8
bbbbb
25.84.0
33.8
a=1.6
b=1.4
2.6
aaaaaaaa
a
a
bbb
4.0
0.55
a8.3 a5.7 a8.3 a
0.55
28.7
a=1.6
High Reliability Inverter Transformers
■OUTLINE
KRecommendedlandpatterns(mm)KDimensions(mm)
The leakage transformer has a special core that allows for co-axial
winding.
Suitable for large LCD panel, and complies to customer needs of
high open voltage and high lamp wattage.
Inverter transformer corresponding to multiple CCFL lamps driving
for large LCD TV application
It is possible to drive 2 CCFLs in 1 transformer. No ballast
capacitor is required
CEIDL377
CPUDL294
CEIDL318
K DIMENSIONS(mm)
9.3 4.5 9.3
29.6
11 10 9 8
17
20.8
25.4
5.7MAX.
7-0.8
6-3.0
4-0.7
K LANDPATTERNS(mm)
1.6
3.5
3.5 22.0
1.6
6-3.0
9.3 9.34.5
K DIMENSIONS(mm)
MAX. 9.0
31.2±0.6
27.4±0.5
18.4
28
10.3
0.35
3.2
10.3 3.7
1.0
4-1.0
2.8
1.6
2.8
3.5
3.2
3.5
22.0
29.0
3.7 10.3
10.3 1.6
K LANDPATTERNS(mm)
14 13 12 11
110
14.75
16.05
36.0
18.0
10.5MAX.
4.2
4-3.0 4-3.0
14-0.8
9.9
9.9
7.3
37.2±0.6
21.0
29.0±0.5
110
13
14 11
12
2.8
Max. 7.5
0.35
2.8
3.7±0.3
10-1.0
10.3
4-1.0
4.2 10.3
±0.3
23.5
30.5
4.2 10.3
10.3
1.6
3.7
1.6
2.8 2.8
3.5
3.5
25
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
High Reliability Inverter Transformers
EIDL369 K DIMENSIONS(mm)
14 13 12 11
10
1
18.0
14.85 13.75
36.0
11.0MAX.
2.75
7.3 9.99.9
4-0.8
4-3.0
4.2
4-3.0
K SPECIFICATIONS
ProductType
CPUDL294 35kHz〜70kHz 1500Vrms 3W2
CEIDL318 35kHz〜65kHz 1500Vrms (1800Vrms, 3sec) 7.5W2
CEIDL377 35kHz〜65kHz 1500Vrms (1800Vrms, 3sec) 7.5W2
CEIDL369 40kHz〜65kHz 1600Vrms (2000Vrms, 3sec) 10W2
EIDL369 40kHz〜65kHz 1600Vrms (2000Vrms, 3sec) 10W2
FrequencyRange
Max.OpenVoltage
Max.LampWattage
Unique shielding reduces noise emissions.
Leakage transformer types are magnetically shielded.
No ballast capacitor is required due to leakage structure of the
transformer.
High temperature reflow soldering is permitted. (Pb free)
■CHARACTERISTICS
K Schematic
GND
Tr2
Vin
Tr1
(P.P)
Lamp
Cover Lamp
Cover
IG
IG
IL2IL1
Normal size panel (TV.Monitor) Large size panel (TV.Monitor)
L
C
C
RR
Vin
DM
GND
OVP
U3 U2
U1
FB
Lamp
Cover Lamp
Cover
IG
IG
IL2IL1
Normal size panel (TV.Monitor) Large size panel (TV.Monitor)
◆APPLICATION
1.LargeLCDTV
2.LCDmonitor
About CPUDL294, CEIDL369, EIDL369
※This specification might be changed without notice due to under developing and improving. Thank you for your understanding.
K Schematic
26
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
High Reliability Inverter Transformers
Slim type Inverter transformer corresponding to multiple CCFL
lamps driving for large LCD TV application
Designed secondary winding for out put voltage check
High efficiency suitable for IC controlled type circuit
■OUTLINE
K DIMENSIONS(mm)
3.8
0.8
4.8
0.3
0.7
3-2.1
0.9
11.8MAX.
6.95MAX.
38.2
40.8MAX.
K LANDPATTERNS(mm)
36.2
2.9
4.8
3.3
3.3
1.0
1.1
3-2.1
CIUH11D66
K SPECIFICATIONS
FrequencyRange 50kHz〜300kHz
Max.OpenVoltage 1600Vrms
Max.LampWattage 8.0W
27
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
INVERTER UNIT
150.05150.05
120.0
3-116.25
6-φ3.0
3-3.75
153.8
8-5.0
6-7.5
101.75
6-7.5
26.024.0
1.0
47.5
95.2
125.0
142.8
153.8
47.5
21.5
95.2
125.2
142.8
Trans
Driver
PWM I
C
Trans
Trans
Trans
Burst controle r
Trans
Driver
PWM I
C
Trans
Trans
Trans
Trans
Driver
PWM I
C
Trans
Trans
Trans
Trans
Driver
PWM I
C
Trans
PWM Clock
Power up seqense r
Ext.clock
Clock sel.
Analog Dim .
ON/OFF
Ret. C. det .
Power
IV120307 DIMENSIONS (mm)
MEASUREMENT CIRCUIT DIAGRAM
KELECTRICAL SPECIFICATIONS
COMPONEMT SIDE
Input Voltage
Input Current
Frequency
LampCurrent(Current/aLamp)
V
A
kHz
mArms
Vin
Iin
Fosc
IL
21.6
−
54.0
4.4
24.0
−
56.0
4.7
26.4
5.91
58.0
5.0
Vin=24.0V±0.1V
Vin=24.0V±0.1V
Vin=24.0V±0.1V
Vin=24.0V±0.1V Duty Ratio=100%
Parameter Symbol Condition Unit
Specifications
min. typ. max.
NEW
1. Inverter unit for powering CCFL in 27" TV application
2.Line communication type circuitry
3.Polyphase circuitry
M OUTLINE
1.Lead-free available
2.For light adjustment, both PWM and voltage methods are used.
3.Effective protection functionality:Excessive-voltage protection and
lamp-open detection circuitry.
M FEATURES
28
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
15
76
15.2MAX.
27.0MAX.
22.5MAX.
5.0MAX.
4-2.5
5-0.8
10.0 0.8
Operating Freq. : Max. 100kHz
Max. Open Voltage : 1,500Vrms
Max. Lamp Wattage : 4W
CPU144C
2.8MAX.
13.8MAX. 10.1
4-1.5
10.2MAX.
6.0
2.8 0.5
0.5
Operating Freq. : Max. 140kHz
Max. Open Voltage : 750Vrms
Max. Lamp Wattage : 1.5W
CPU9D25
8.0
4-2.0
3.0MAX.
0.6
0.6
7.4
10.8MAX.
12.3MAX.
Operating Freq. : Max. 140kHz
Max. Open Voltage : 750Vrms
Max. Lamp Wattage : 1.2W
CLQ122
23.6MAX. 21.6
4.5 0.6
8.6MAX.
4.7MAX.
0.4
4-1.4
0.3
Operating Freq. : Max. 300kHz
Max. Open Voltage : 1,000Vrms
Max. Lamp Wattage : 1.2W
CIUH84
31.5MAX. 6.2MAX.
6-2.75
16.5
78
19
26.0MAX.
23.0MAX.
Operating Freq. : Max. 80kHz
Max. Open Voltage : 1,800Vrms
Max. Lamp Wattage : 6W
Operating Freq. : Max. 65kHz
Max. Open Voltage : 1,500Vrms
Max. Lamp Wattage : 6W2
Operating Freq. : Max. 100kHz
Max. Open Voltage : 1,500Vrms
Max. Lamp Wattage : 7.5W
CPU215
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
24.5MAX.
32.0MAX.
26.5MAX.
7.0MAX.
1.0
1.0
6-2.75
16.5
CPUL236
CPUDL328
32.9MAX.
24.2
29.8MAX.
0.8
17
8.5MAX.
4-1.0
7-1.2
6-3.0
10.9 10.95.0
11 10 9 8
29
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
4.8MAX.
3-1.7
5.2
8.0MAX.
0.5
35.9
37.8MAX.
Operating Freq. : Max. 200kHz
Max.open voltage : 1,600Vrms
Max.lamp wattage : 4.0W
CIUH7D45
6.0
1.5
0.8
26.41.3
4-2.0
30.2MAX. 6.1MAX.
27.2
11.4MAX.
0.6
CEPH115
Operating Freq. : Max. 150kHz
Max. Open Voltage : 1,300Vrms
Max. Lamp Wattage : 3.0W
0.5
1.8
0.6
0.9
26
34
36.4MAX.
3.5MAX.
3.5
5.6 7.6MAX.
Operating Freq. : Max. 100kHz
Max. Open Voltage : 1,600Vrms
Max. Lamp Wattage : 3.5W
CIU7D32
30.5
26.0MAX.
4-1.0
4-3.5
2.5
2.5
5.9
12.1 2.25
3-1.0
3-0.7
9.3MAX.
33.5MAX.
Operating Freq. : Max. 100kHz
Max. Open Voltage : 2,000Vrms
Max. Lamp Wattage : 15.0W
CEPH249
30.0
33.0MAX.
9.5MAX.
29.0
1.95
7.8 6.6
22.0MAX.
4-3.52.1 1.0
Operating Freq. : Max. 100kHz
Max. Open Voltage : 2,000Vrms
Max. Lamp Wattage : 10.0W
CEPH209
17.0MAX. 6.1MAX. 16.2
5.5 2.75
1.0
0.8 4-2.75
27.8MAX.
26.0
23.3
Operating Freq. : Max. 300kHz
Max. Open Voltage : 1,300Vrms
Max. Lamp Wattage : 3.0W
CEPH165
14.7MAX.
12.6
5.0
0.3 0.6
1.0
4-2.5
2.5
5.75MAX.
23.0MAX.
18.3
(10.45)(9.65)
Operating Freq. : Max. 300kHz
Max. Open Voltage : 1,300Vrms
Max. Lamp Wattage : 2.5W
CEPH145B
30
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
9.0MAX.
4.5MAX.
3.7MAX.
37.8MAX.
5.2
0.5
0.625
0.5 3-1.7
0.3
35.9
Operating Freq. : Max. 200kHz
Max. Open Voltage : 1,600Vrms
Max. Lamp Wattage : 3.5W
CIUH8D34
INVERTER TRANSFORMERS
0.7
6.8
29.4
31.7MAX.
7.2MAX.
26.1
5-1.5 0.5
9.3MAX.
CIU86
Operating Freq. : Max. 200kHz
Max. Open Voltage : 1,500Vrms
Max. Lamp Wattage : 3.0W
9.0MAX. 4.5MAX.
37.8MAX.
5.2
0.50.625
0.5 3-1.7
0.3
35.9
Operating Freq. : Max. 200kHz
Max. Open Voltage : 1,600Vrms
Max. Lamp Wattage : 3.5W
CIUH8D42
32.0
0.5
4-1.6
1.9
34.1MAX.
28.6
10.7MAX. 7.8 0.7
8.5MAX.
CIU98
Operating Freq. : Max. 300kHz
Max. Open Voltage : 1,800Vrms
Max. Lamp Wattage : 6.0W
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
5-2.5
17.8MAX.
31.4
6.1MAX.
34.6MAX. 31.6
6.8 7.9
0.55
0.8
Operating Freq. : Max. 150kHz
Max. Open Voltage : 1,800Vrms
Max. Lamp Wattage : 5.0W
CIOH175
31
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
INVERTER TRANSFORMERS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
5-2.5
ø0.5
3.010.0MAX.
15.5
24.5MAX.
22.5MAX.
EP208B
Operating Freq. : Max. 300kHz
Max. Open Voltage : 1,600Vrms
Max. Lamp Wattage : 4.0W
4.0 4.0
ø0.6
14.0MAX. 3.5
12.0
5-4.0
25.5
35.0MAX.
26.3MAX.
Operating Freq. : Max. 500kHz
Max. Open Voltage : 2,200Vrms
Max. Lamp Wattage : 15.0W
EEH2513
ø11.0
ø15.5MAX.
30˚
45˚
10.4MAX.
MC159
Operating Freq. : Max. 100kHz
Max. Open Voltage : 900Vrms
Max. Lamp Wattage : 1.5W
ø0.5
ø15.5MAX. 3.0
45˚
30˚
ø11.0
9.0MAX.
LC158
Operating Freq. : Max. 100kHz
Max. Open Voltage : 900Vrms
Max. Lamp Wattage : 2.5W
ø0.5
3.08.0MAX.
12.5
17.0MAX.
4-2.5
13.5MAX.
Operating Freq. : Max. 300kHz
Max. Open Voltage : 900Vrms
Max. Lamp Wattage : 1.7W
EW-12H
11.0
4-3.3
ø0.6
4.016.0MAX.
15.0MAX.
17.0MAX.
SEP-16
Operating Freq. : Max. 300kHz
Max. Open Voltage : 1,200Vrms
Max. Lamp Wattage : 4.0W
32
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
Transformer for UP-Down or Up Converter
■OUTLINE
This is small size and high efficient up-down converter
transformer which is 2 in 1 construction. (ex. SEPIC converter)
It is possible to output the high voltage which is hard to obtain
with an ordinary inductor with sufficient accuracy.
It is available for a white LED back light drive.
CLS4D18 K DIMENSIONS(mm)
4.8±0.2 5.3
3.4
MAX.2.0
0.5
4.8±0.2
3
3
2
1
2.8
0.7
0.7
MAX,5.1
K LANDPATTERNS(mm)
3.1 1.5
2.00.9
K SEPIC CONVERTERSCHEMATIC
Vin(2.5~6V) Vo(3.3V)T1:CLS6D28
L1 C1
L2 C2
C1、C2:10µF（ceramiccapacitor）
90
80
70
60
50
40
0.0 0.2 0.4 0.6 0.8 1.0
ηvs.Io (Vin=3V/Vo=3.3V)
η (%)
Io (A)
SEPIC
flyback
zeta
90
80
70
60
50
40
0.0 0.2 0.4 0.6 0.8 1.0
ηvs.Io (Vin=3V/Vo=3.3V)
η (%)
Io (A)
K SEPIC CONVERTERCHARACTERISTIC
CLS4D28 K DIMENSIONS(mm)
4.8±0.2
4.5
2.6
MAX,3.0
5.0±0.2
MAX,6.5
4.75
2.1
K LANDPATTERNS(mm)
2.3 1.3
1.82.0
CLS6D28 K DIMENSIONS(mm)
6.7
2.7 2.5
7.4
6.6
6.7 5.5
K LANDPATTERNS(mm)
2.1 1.9
2.82.3
About CLS4D18, CLS4D28
※This specification might be changed without notice due to improving. Thank you for your understanding.
33
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
DC/DC Converter Transformers
■OUTLINE
This is the transformer of multiple output type,which has size
lineup.
There are Max.3.0mm hight×5mm square and Max.2.5mm
hight×7mm square.
It is designed as a special structure to prevent wire breaking and
solves the space reduction problem in the DSCs and DVCs.
CLQ5D27
K DIMENSIONS(mm) K LANDPATTERNS(mm)
CLQ7D23
K DIMENSIONS(mm) K LANDPATTERNS(mm)
K SPECIFICATIONS
Max.Operatingfrequency 1MHz
Max.Operatingpower 350mW@300kHz
580mW@500kHz
1.1W@1MHz
K SPECIFICATIONS
Max.Operatingfrequency 1MHz
Max.Operatingpower 450mW@300kHz
700mW@500kHz
1.4W@1MHz
NEWNEWNEW
4.5
6.4MAX. 3.0MAX.
5.6
0.4
3-1.0
6.1MAX.
2.5MAX.
3-1.27
0.4
6.0
8.0MAX.
7.7
9.8MAX.
1.4
4.0
(5.8)
1.01.01.0
0.55
Solder Resist
5.5
2.5
0.7
1.27 1.27 1.27
7.9
Solder Resist
※Inordertopreventshort-circuiting,asolderresistisrecommended.
※Inordertopreventshort-circuiting,asolderresistisrecommended.
About CLQ5D27
※This specification might be changed without notice due to improving. Thank you for your understanding.
NEWNEWNEW
34
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
DC/DC COVERTER TRANSFORMERS
0.6
1.0 1.0
5.1MAX.
3.7
0.4
3.0MAX.
4.9MAX.
4.4
Inductance : Max.500µH
Operating Freq. : Max. 1MHz
Max. Operating Power : 160mW (300kHz)
270mW (500kHz)
540mW (1MHz)
CLQ4D27
4.5
6.4MAX.
2.5MAX.
5.6
0.4
3-1.0
6.1MAX.
Inductance : Max.800µH
Operating Freq. : Max. 1MHz
Max. Operating Power : 290mW (300kHz)
480mW (500kHz)
930mW (1MHz)
CLQ52
2.5MAX. 3-1.27
0.4
7.0MAX.
7.9MAX.
6.1
6.7
7.0MAX. 3.0MAX. 3-1.27
0.4
6.1
7.9MAX.
6.7
Inductance : Max. 2.0mH
Operating Freq. : Max. 1MHz
Max. Operating Power : 220mW (300kHz)
380mW (500kHz)
780mW (1MHz)
Inductance : Max. 3.0mH
Operating Freq. : Max. 1MHz
Max. Operating Power : 240mW (300kHz)
400mW (500kHz)
800mW (1MHz)
CLQ72B
CLQ72
3.0MAX.
3-1.27
0.4
6.0
8.0MAX.
7.7
9.8MAX.
Inductance : Max. 4mH
Operating Freq. : Max. 1MHz
Max. Operating Power : 640mW (300kHz)
1.0W (500kHz)
2.0W (1MHz)
CLQ7D27
0.4 3-1.27
6.0
9.8MAX.
4.0MAX.
8.0MAX.
7.7
Inductance : Max. 5.2mH
Operating Freq. : Max. 1MHz
Max. Operating Power : 1.0W (300kHz)
1.8W (500kHz)
3.0W (1MHz)
CLQ7D37
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
0.6
1.0 1.0
4.8
3.7
2.0MAX.
0.05
4.9MAX.
0.4
4.6MAX.
CLQ4D18 Inductance : Max.500µH
Operating Freq. : Max. 1MHz
Max. Operating Power : 100mW (300kHz)
175mW (500kHz)
350mW (1MHz)
5.6
5.6
1.8MAX. 6.0
4.3
0.4
1.01.0
CLQ5D16
Inductance : Max.500µH
Operating Freq. : Max. 1MHz
Max. Operating Power : 290mW (300kHz)
480mW (500kHz)
930mW (1MHz)
NEWNEWNEW
NEWNEWNEW
35
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
DC/DC COVERTER TRANSFORMERS
10.9MAX. 8.0
3.0MAX.
0.5 3-1.7
10.7
11.9MAX.
0.5
3-2.0
Inductance : Max. 8.2mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 600mW (100kHz)
1.4W (300kHz)
2.2W (500kHz)
CLQ102
7.5
0.5 3-2.0
4.5
MAX.
MAX. MAX.
10.9
11.9
Inductance : Max. 18.0mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 800mW (100kHz)
2.0W (300kHz)
3.0W (500kHz)
CLQ104
4-2.5
0.6
14.5MAX.
12.26.0MAX.12.0
13.9MAX.
12.0
Inductance : 22mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 1.2W (100kHz)
2.9W (300kHz)
4.3W (500kHz)
CLS-12
6.6
9.5MAX.
7.6
6.2MAX.
8.0MAX.
7.0
3-1.75
0.5
Inductance : Max. 300mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 700mW (100kHz)
1.6W (300kHz)
2.4W (500kHz)
CEE-78
3.9MAX.
3-2.0
0.6
10.0MAX.
8.0
11.3MAX.
9.2
8.2
Inductance : Max. 40mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 400mW (100kHz)
900mW (300kHz)
1.8W (500kHz)
CEE93
4.5MAX.
8.2
11.3MAX.
9.2
10.0MAX.
8.0
0.6
3-2.0
Inductance : Max. 300mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 870mW (100kHz)
2.0W (300kHz)
3.0W (500kHz)
CEE94
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
0.8
4.5MAX.7.8MAX. 3-1.27
0.6
7.8MAX.
3-1.27
Inductance : Max. 1mH
Operating Freq. : Max. 1MHz
Max. operating power : 700mW(500kHz)
CBM74
9.2
4-2.0
0.6
11.3MAX.
5.0MAX.
9.6
11.3MAX.
9.6
Inductance : Max. 4.3mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 650mW (100kHz)
1.5W (300kHz)
2.2W (500kHz)
CLS-10
36
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
DC/DC COVERTER TRANSFORMERS
12.2
4-2.0
14.5MAX.
0.6
6.0MAX.
13.0MAX.
9.6
11.0
Inductance : Max.2.0H
Operating Freq. : Max. 500kHz
Max. Operating Power : 1.2W (100kHz)
3.8W (300kHz)
6.3W (500kHz)
CEI-120
1.27 6.35 1.27
12.0MAX.
13.7MAX.
9.8
0.5
10.0
6.5MAX.
12.0
Inductance : Max. 5.2mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 1.0W (100kHz)
2.3W (300kHz)
3.4W (500kHz)
CEEH126
7.5MAX.
4-2.5
16.5MAX. 0.5
14.5
17.0MAX.
12.0
Inductance : Max. 125mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 2.5W (100kHz)
6.0W (300kHz)
8.8W (500kHz)
CEE156
9.0MAX.
15.0MAX.
0.5
4-2.5
14.5
17.0MAX.
12.8
Operating Freq. : Max. 500kHz
Max. Operating Power : 2.6W (100kHz)
6.2W (300kHz)
9.3W (500kHz)
CEE158
24.0MAX.
20.6
0.7
17.1 10.8MAX.
17.6
18.6MAX.
3-5.0
4-3.5
Inductance : Max. 700mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 4.0W (100kHz)
10.0W (300kHz)
14.0W (500kHz)
CEPH1710
10.2MAX.
25.9MAX.
18.0
22.0
29.9MAX.
26.6
14.0
23.0 1.0
4-3.5
24.0
Inductance : Max. 130mH
Operating Freq. : Max. 500kHz
Max. Operating Power : 3.2W (100kHz)
7.5W (300kHz)
11.0W (500kHz)
CEPH199
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
3-2.0
6.0MAX.
10.0MAX.
8.0
0.6
8.2
11.3MAX.
9.2
Inductance : Max. 1.1H
Operating Freq. : Max. 500kHz
Max. Operating Power : 1.1W (100kHz)
2.8W (300kHz)
4.2W (500kHz)
CEE-98
5.8MAX.
17.4
7.5
5-2.5
22.0MAX.
20.0
21.0MAX.
20.0
21.0
0.8
Inductance : Max. 3.0H
Operating Freq. : Max. 500kHz
Max. Operating Power : 800mW (100kHz)
2.5W (300kHz)
4.2W (500kHz)
CEPH205
37
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
10.0
4-2.5
9.0
10.62.86.9MAX.
ø0.5
12.6MAX.
12.6MAX.
Inductance : Max. 5.4mH
Operating freq. : Max. 500kHz
Max. Operating Power : 2.5W (100kHz)
5.8W (300kHz)
8.6W (500kHz)
EEH116
ø10.0
36˚
ø0.5
2.5 8.5MAX.
ø13.0MAX.
Operating Freq. : Max. 500kHz
Max. Operating Power : 0.8W (100kHz)
1.9W (300kHz)
2.9W (500kHz)
LC128B
36˚
ø8.0
ø15.0MAX
ø0.5
3.5 10.0MAX
Operating Freq. : Max. 300kHz
Max. Operating Power : 2.7W (100kHz)
6.5W (300kHz)
LC-15
60˚
ø8.5MAX. ø5.5
3.0※6.0MAX.
4.0MAX.
ø0.4
LC-8, LC-8U
Operating Freq. : Max. 500kHz
LC-8
Max. Operating Power : 320mW (100kHz)
750mW (300kHz)
LC-8U
Max. Operating Power : 370mW (100kHz)
1.1W (300kHz)
1.8W (500kHz)
DC/DC CONVERTER TRANSFORMERS
LC-8/※LC-8U
45˚
ø8.7MAX.
ø6.0
3.08.5MAX.
ø0.5
Operating Freq. : Max. 500kHz
Max. Operating Power : 330mW (100kHz)
1.0W (300kHz)
1.7W (500kHz)
MC-080U
5.0MAX.
36˚
ø8.0
ø0.5
2.0
ø11.0MAX.
Operating Freq. : Max. 500kHz
Max. Operating Power : 360mW (100kHz)
1.1W (300kHz)
1.8W (500kHz)
LC-10
36˚
ø11.0MAX.
ø0.5
3.07.3MAX.
ø8.0
Operating Freq. : Max. 500kHz
Max. Operating Power : 960mW (100kHz)
2.2W (300kHz)
3.4W (500kHz)
MC-100C
ø10.0
36˚
ø0.5
2.5 8.5MAX
ø13.0MAX.
Operating Freq. : Max. 500kHz
Max. Operating Power : 1.5W (100kHz)
3.6W (300kHz)
5.0W (500kHz)
LC-128
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
38
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
DC/DC COVERTER TRANSFORMERS
10.0
2.52.5 2.52.5
7.3
ø0.5
3.510.0MAX.14.0MAX.
11.5MAX.
Operating Freq. : Max. 300kHz
Max. Operating Power : 2.0W (100kHz)
6.1W (300kHz)
EER-137
5-2.5
12.5
ø0.6
3.28.8MAX.
15.6MAX.
15.8MAX.
Inductance : Max. 6.5mH
Operating freq. : Max. 300kHz
Max. Operating Power : 2.5W (100kHz)
7.6W (300kHz)
EEH157
8.0
2.9
2.52.52.5
12.5MAX.
10.8MAX.
10.8MAX.
0.5
Operating Freq. : Max. 500kHz
Max. Operating Power : 2.5W (100kHz)
6.0W (300kHz)
8.9W (500kHz)
EE1011
13.0MAX.
4-2.5
8.5
3.513.5MAX.14.0MAX.
ø0.6
Operating Freq. : Max. 300kHz
Max. Operating Power : 3.1W (100kHz)
9.2W (300kHz)
EE-13
11.0
4-3.3
ø0.6
4.016.0MAX.
15.0MAX.
17.0MAX.
Operating Freq. : Max. 300kHz
Max. Operating Power : 4.0W (100kHz)
12.0W (300kHz)
SEE-16
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
4 - 3.81
23.0MAX.
ø1.0
15.253.817.7MAX.24.0MAX.
Operating Freq. : Max. 500kHz
Max. Operating Power : 4.0W (100kHz)
10.0W (300kHz)
14.0W (500kHz)
EEH2017
21.0MAX. 13.0MAX. 5.0
17.5
22.0MAX.
6-2.5
ø0.6
Operating Freq. : Max. 300kHz
Max. Operating Power : 4.8W (100kHz)
11.0W (300kHz)
EI-20H
3.5
6.0 5.0
4.04.0 4.0
4.0 4.0
18.0MAX.
21.0MAX.
15.5MAX.
Operating Freq. : Max. 300kHz
Max. Operating Power : 8.7W (100kHz)
20.0W (300kHz)
EI-191
39
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
12.0
4.0 4.0 4.04.0
6.0
21.0MAX.
23.0MAX.
ø0.8
17.5MAX.
Operating Freq. : Max. 300kHz
Max. Operating Power : 7.8W (100kHz)
18.0W (300kHz)
EI-22
21.0MAX.21.0MAX.
28.0MAX.
15.5
5-4.5
4-5.5
ø0.8
3.0
Operating Freq. : Max. 300kHz
Max. Operating Power : 16.0W (100kHz)
38.0W (300kHz)
EI-255B
25.0MAX.
7.523.0MAX.
17.5
4-5.0
29.5MAX.
ø0.8
Operating Freq. : Max. 300kHz
Max. Operating Power : 22.0W (100kHz)
51.0W (300kHz)
EI-28
30.0
5-5.0
ø0.8
5.026.0MAX.
38.0MAX.
31.0MAX.
Operating Freq. : Max. 500kHz
Max. Operating Power : 11.0W (100kHz)
27.0W (300kHz)
40.0W (500kHz)
ERH2826
33.0MAX. 6.033.0MAX.
20.0
4-5.0
ø0.8
27.0MAX.
Operating Freq. : Max. 300kHz
Max. Operating Power : 29.0W (100kHz)
67.0W (300kHz)
EI-30
ø0.6
3.5
12- 2.54
17.526.0MAX.
35.0MAX.
31.0MAX.
25.0MAX.
1
Operating Freq. : Max. 500kHz
Max. operating power : 20W(500kHz)
Weight : 30g
ER3023
29.5MAX 17.0MAX 4.1 10-2.54
29.0MAX
φ0.6
24.0
20.0
Operating Freq. : Max. 300kHz
Max. Operating Power : 14.0W (100kHz)
32.0W (300kHz)
EPH2815
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
21.5MAX. 18.5MAX. 15.23.5
22.3MAX.
4-3.81
ø0.80
Operating Freq. : Max. 500kHz
Max. Operating Power : 3.3W (100kHz)
10.0W (300kHz)
16.5W (500kHz)
EF2017
NEWNEWNEW
40
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
DC/DC CONVERTER TRANSFORMERS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
17- 2.5
25.0
36-ø0.6
3.533.0MAX.
49.0MAX.
33.0MAX.
Inductance : Max. 56mH
Operating Freq. : Max. 500kHz
Max. operating power : 60W(500kHz)
Weight : 75g
ER4831
41
SIGNAL COMMON MODE CHOKE COILS
SIGNAL COMMON MODE CHOKE COILS
Common Mode Choke Coils for DC LINES
DC line noise filter for LCDTV,PC and Electronic Equipments.
■OUTLINE
CPFC805 K DIMENSIONS(mm) K LANDPATTERNS(mm)
K SPECIFICATIONS
Impedance D.C.R
at100MHz (1-4) (2-3)
Rated current
500Ωor more 7.5mΩor less 4.5A
K IMPEDANCECHARACTERISTICS
CPF6D36 K DIMENSIONS(mm)
4.3
1.5
5.3
(3.1)
5.3
Max.6.2 MAX.3.8
4.2
2.1
2.11.2
2.5
K LANDPATTERNS(mm)
K IMPEDANCECHARACTERISTICS
1M 10M 100M
FREQUENCY(Hz)
IMPEDANCE(Ω)
1G
100
1000
K SPECIFICATIONS
Impedance D.C.R
at100MHz (1-4) (2-3)
Rated current
600Ωor more 22mΩor less 2.5A
MAX.7.9
7.5±0.3
MAX.4.8 4.3
1.5±0.3
1.6±0.3
2.3
2.31.2
3.9
1M 10M 100M
FREQUENCY(Hz)
IMPEDANCE(Ω)
1G
100
1000
About CPF6D36
※This specification might be changed without notice due to improving. Thank you for your understanding.
42
SIGNAL COMMON MODE CHOKE COIL
SIGNAL COMMON MODE CHOKE COIL
Common Mode Choke Coil for Communication
It is common mode noise filter of small and SMD type
It has 4-line construction and is suitable to IEEE1394.
■OUTLINE
K DIMENSIONS(mm)
8-0.4
PIN1
6-1.27
6-1.27
3.05 6.4
0.57
0.4
1
2
3
4
8
7
6
5
6.0MAX.
K LANDPATTERNS(mm)
1.27 0.8
1.5
8.0
3.81
SUGGEST PCB LAYOUT
TOLERANCE:
CBM6068
K MEASUREMENTCIRCUITDIAGRAM
1
2
3
4
8
7
6
5
K SPECIFICATIONS
ITEM SPECIFICATION CONDITION
D.C.R（1-8），（2-7），（3-6），（4-5） 0.3ΩMAX 20℃
Idc 0.65AMAX
-2.8±2.0dB 50MHz
INSERTIONLOSS -7.3±2.5dB 100MHz
-12.0±3.0dB 300MHz
-14.0±3.0dB 500MHz
HIPOT
(1-8)TO(2,3,4,CORE),(2-7)TO(3,4,CORE)
DC100V
0.5mA,1minute.
(3-6)TO(4,CORE),(4-5)TOCORE
INSULATIONRESISTANCE
(1-8)TO(2,3,4,CORE),(2-7)TO(3,4,CORE),(3-6)
100MΩMIN
100Vdc,1minute
TO(4,CORE),(4-5)TOCORE
COMMONMODEIMPEDANCE 185ΩTypical 100MHz
About CBM6068
※This specification might be changed without notice due to improving. Thank you for your understanding.
43
SIGNAL COMMON MODE CHOKE COILS / DC COMMON MODE CHOKE COILS
SIGNAL COMMON MODE CHOKE COILS / DC COMMON MODE CHOKE COILS
0.25
9.7MAX.
2.5MAX.
6.5
4.6 1.27
2.54
0.5
Inductance : 50µH – 500µH
Leakage Inductance : Max.0.3µH – Max.0.35µH
Line capacitance : Max.6.0pF – Max.10.0pF
D.C.R : Max.250mΩ– Max.300mΩ
SIGNAL COMMON MODE CHOKE COILS
DC COMMON MODE CHOKE COILS
CLP42
9.0MAX. 2.5MAX.
0.25
2.54
6.5
9.7MAX.
1.27 0.5
Inductance : Max.500µH
Leakage Inductance : Max.0.25µH
Line capacitance : Max.10.0pF
D.C.R : Max.700mΩ
CLP82
4.5
1.0
5.08
0.6
6.2MAX 8.2MAX
7.5MAX
2.54
SFC68
Inductance : 4.3µH – 121.5µH
D.C.R. : 19.5mΩ– 114mΩ
Rated Current : 600mA – 2.9A
3.4
2.2
0.1
3.4MAX. 2.8MAX.
4.7MAX.
Impedance : 350Ω–800Ω(at 100MHz)
D.C.R. : 200mΩ– 500mΩ
Rated Current : 400mA – 800mA
CRR32
9.5MAX.
0.15
5.08MAX.
5.7MAX.
7.0
2.54
1.3
6.4
Impedance : 100Ω– 1kΩ(at100MHz)
D.C.R. : 60mΩ– 120mΩ
Rated current : 1.5A – 3.0A
CPFC74
10.0
7.5
4.0
12.5MAX.
10.3MAX. 12.0MAX.
ø0.7
8.0
7.03.516.5MAX.
16.5MAX.
11.0MAX.
ø0.6
Inductance : 0.20µH – 2.69µH
Rated current : 2.2A – 3.4A
Inductance : 8.6mH
D.C.R. : 3.0Ω
Rated current : 300mA
BM1012LF
UU9TF
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
44
NORMAL MODE CHOKE COILS
NORMAL MODE CHOKE COILS
2.5MAX.
5.0
25.5 8.7MAX.
ø0.5
7.5MAX.
(23.0) 12.7MAX.
0.5(5.0)
6.3MAX.9.5MAX.
Impedance : 300Ω– 900Ω(10MHz)
D.C.R : 150mΩ– 250mΩ
Inductance : 18.0µH
D.C.R. : 44mΩ
Rated current : 1.8A
NORMAL MODE CHOKE COILS
BM27
SLF0912
14.5MAX.
(10.5)
20.5MAX.
16.0MAX.
(10.0)
Inductance : 21µH – 37µH
D.C.R. : 43mΩ– 58mΩ
Rated current : 2.0A – 5.4A
PFN1316
19.0MAX.
(15.0)
29.0MAX.
24.0MAX.
(10.0)
Inductance : 32µH – 88µH
D.C.R. : 31mΩ– 53mΩ
Rated current : 3.7A – 4.9A
PFN1825
21.0MAX.
24.0MAX.
29.00MAX.
16.0 ø1.10
10.0
35.5MAX.
PFN2029
Inductance : 52µH – 83µH
D.C.R. : 30mΩ– 38mΩ
Rated current : 5.4A – 6.1A
(16.0)
31.0MAX.
(10.0)
21.0MAX.
26.0MAX.
24.0MAX.
PFN2028
Inductance : 52µH – 83µH
D.C.R. : 30mΩ– 38mΩ
Rated current : 5.4A – 6.1A
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
45
AC COMMON MODE CHOKE COILS
AC COMMON MODE CHOKE COILS
AC COMMON MODE CHOKE COILS
Inductance : 470µH – 10.0mH
D.C.R. : 150mΩ– 4.0Ω
Rated current : 200mA – 1.0A
7.0
3.5
16.5MAX.
16.5MAX.
8.0
2-ø0.6
11.0MAX.
UU9LF
Inductance : 470µH – 10.0mH
D.C.R. : 150mΩ– 40Ω
Rated current : 200mA – 1.0A
7.0
3.5
3.5
12.5MAX.
16.5MAX.
8.0
15.5MAX.
2-ø0.6
UU9LFH
Inductance : Min. 19.0mH
D.C.R. : 6.5Ω
Rated current : 150mA
16.5MAX.
8.0
ø0.6
11.0MAX. 16.5MAX. 2.8 7.0
3.4
UU9LFB
4-ø0.6
3.517.0MAX.
9.0
13.0MAX.
14.09.5MAX.
Inductance : 470µH – 10.0mH
D.C.R. : 150mΩ– 4.0Ω
Rated current : 200mA – 1.1A
LF1290
Inductance : Min.19.0mH
D.C.R. : 6.5Ω
Rated current : 150mA
16.5MAX.
8.0
ø0.6
15.5MAX. 12.5MAX. 2.8 7.0
3.4
UU9LFBH
18.5MAX.
ø0.7
13.0
10.0
4.0
23.0MAX.
17.0MAX.
5.7
18.5MAX.
ø0.7
13.0
10.0
4.0
23.0MAX.
17.0MAX.
5.7
Inductance : 3.3mH – 51.0mH
D.C.R. : 710mΩ– 9.12Ω
Rated current : 150mA – 650mA
Inductance : 3.3mH – 51.0mH
D.C.R. : 710mΩ– 9.12Ω
Rated current : 150mA – 650mA
UU10LF
UU10LFB
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
20.0MAX.
13.0
ø0.7
10.0
4.5
6.20
28.5MAX.
22.0MAX.
Inductance : 1.5mH – 30mH
D.C.R. : 125mΩ– 2.5Ω
Rated current : 400mA – 1.9A
UU16LF
46
AC COMMON MODE CHOKE COILS
AC COMMON MODE CHOKE COILS
AC COMMON MODE CHOKE COILS
20.0MAX.
6.20
13.0
ø0.7
10.0
4.528.5MAX.
22.0MAX.
Inductance : 1.5mH – 30mH
D.C.R. : 200mΩ– 2.5Ω
Rated current : 400mA – 1.9A
UU16LFB
Inductance : 2.2mH – 33mH
D.C.R. : 240mΩ– 3.42Ω
Rated current : 300mA – 1.3A
0.8
13.0
17.0
3.517.0MAX.
21.0MAX.
22.0MAX.
LF2115
1.5MAX.
5.0
(15.0)
20.0MAX.25.0MAX.
(10.0)
ø0.9
27.0MAX.
Inductance : 450µH – 7.0mH
D.C.R. : 8.5mΩ– 135mΩ
Rated AC current : 2.5A – 10.0A
PFC2225B
25.0MAX.
1.5MAX.
ø0.8
5.0 34.0MAX.
34.0MAX.
(18.0) (16.0)
Inductance : 600µH – 1.5mH
D.C.R. : 4.8mΩ– 18.5mΩ
Rated current : 8.5A – 17A
PFC2831
13.0
4-ø0.8
22.0MAX.
10.04.522.5MAX.17.2MAX.
Inductance : 2.2mH – 33mH
D.C.R. : 240mΩ– 3.42Ω
Rated current : 300mA – 1.3A
LF2020
20.0
29.5MAX.
24.0
29.5MAX.
ø0.8
4.024.0MAX.
Inductance : 1.8mH – 68.0mH
D.C.R. : 72mΩ– 1.82Ω
Rated current : 600mA – 2.6A
LF2823
Inductance : 2.5mH – 35mH
D.C.R. : 130mΩ– 1.58Ω
Rated current : 600mA – 2.0A
15.0
21.0
4.021.0MAX.
ø0.8
25.2MAX.
25.2MAX.
LF2420
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
ANTENNA / FILTER
47
ANTENNA / FILTER
Transponder・RF-ID (TX)
Suitable for Key less enter and Home security system's Tx-ant
■OUTLINE
K DIMENSIONS(mm)
K SCHEMATICS
AS737
※This specification might be changed without notice due to under developing and improving. Thank you for your understanding.
✽ Itispossible2terminaltype(ー)
K SPECIFICATIONS(REFERENCE)
✽ Itispossibleforcustomerspecificationatharnesslengthandconnectorform.
Tuning Frequency 125.01.0kHz within
Impedance 1.0Ω(typ.)
◆FEATURES
1.Pre-tuneAntprovidehighefficiencyincustomerline
2.Moldingimprovedfromenvironmentalsuffering
3.2terminalsoutavailable
4.Packagingcanbeavailable(withHarness,Connector
andCasing)
3
2
1
72.5
14.5
7.5
1.3
0.35
4.6 4.6
C
L
32 1
C
L
21
48
ANTENNA / FILTER
ANTENNA / FILTER
It is AM Radio Noise reduction filter which is combined with an antenna of Smart
Entry System.
■OUTLINE
Noise Filter
3-2.0
9.2
7.610.0MAX.11.0MAX.
0.4
9.8MAX.
CEP79 K DIMENSIONS(mm) K SCHEMATICS
8
5
6
7
4
1
3
2
Inductance (4-1) 260µH ±35% (2–1, 4–3 tie)
D.C.R (4–1) 50mΩbelow (3–4, 2–1 tie)
D.C.R (8–5) 50mΩbelow (5–6, 8–7 tie)
Temperature Rise 2.5A@△=30˚C(D.C.Current)
Current (Typ.) 6.8A@△=30˚C(Dummy Load Current)
K SPECIFICATIONS
K Characteristics
0pF
Add on 270pF
Add on 150pF
20
10
0
-10
-20
-30
-40100k 1M 10M
FREQUENCY(Hz)
dB
Common Attenuation
49
ANTENNAS
ANTENNAS
Transponder・RF-ID (RX)
Antenna coils for Keyless Entry Systems, Smart Entry Systems and
Passive Entry Systems RF-ID etc.
K DIMENSIONS(mm)
16.4
17.0MAX.
1.6MAX.
3.5MAX.
14.21.3 1.3
6.85
16.4
1.5
MAX.1.6
0.2
φ13.5
φ14.7
K LANDPATTERNS(mm)
3.4
13.1
17.4
1.7
13.5
17.2
CAS16D14
CAS11D21 K DIMENSIONS(mm)
3.3MAX.
(1.7)
2.3MAX. 11.6MAX.
8.5
■OUTLINE
K LANDPATTERNS(mm)
3.4
8.1
12.3
K DIMENSIONS(mm)
1.7
3.5MAX.
2.95MAX. 8.6
11.6MAX.
K DIMENSIONS(mm)
4.8MAX.
4.0MAX.
3.0MAX.
2.4
12.0
15.0MAX.
K LANDPATTERNS(mm)
3.0
15.6
11.4
K LANDPATTERNS(mm)
K SPECIFICATIONS
Product Type Inductance QS.R.F. Sensitivity Frequency
CAS11D21 2.3mH Min. 30 1MHz Min. 29mV/A/m 125kHz
CAS11D28 500µH〜7.2mH Min. 30 700kHz 50mV/µT (7.2mH) 125kHz
CAS14D26 900µH〜2.4mH Min. 30 1MHz 38mV/µT (2.3mH) 125kHz
CAS16D14 1mH〜6mH 35 (TYP.) 650kHz 68mV/µT (6mH) 125kHz
CAK15D14 1mH〜6mH 13 (TYP.) 1MHz 55mV/µT 125kHz
K DIMENSIONS(mm) K LANDPATTERNS(mm)
CAK15D14
NEWNEWNEW
NEWNEWNEW
CAS11D28
CAS14D26
50
ANTENNAS
ANTENNAS
TPMS・RF-ID
K DIMENSIONS(mm)
K LANDPATTERNS(mm)
12.1
9.0
3.0
It is TPMS(Tire Pressure Monitoring System)
■OUTLINE
CAS113
K SPECIFICATIONS(REFERENCE)
Inductance QS.R.F. Sensitivity Frequency
7.2mH 55 700kHz 50mVp-p/µT 125kHz
2.89mH 45 700kHz 31mVp-p/µT 125kHz
K SPECIFICATIONS(REFERENCE)
Inductance QS.R.F. Sensitivity Frequency
1mH7mH Min. 40 Min. 400kHz 82mV/µT (7mH) 125kHz
K DIMENSIONS(mm)
17.2
3.6
20.0MAX.
5.3MAX.
1.9MAX.
4.3
19.0
K LANDPATTERNS(mm)
It is transponder antenna coil which also performs as key-less
entry antenna built into key case.
■OUTLINE
This is the RF-ID transponder coil, which is for related security
equipment and keyless entry systems for automobiles.
■OUTLINE
ø2.6
ø2.7
9.2
0.5
1.0
1.5
1.0
1.5
2.7
K SCHEMATICS
2
1
AR9D27 K DIMENSIONS(mm)
K SPECIFICATIONS
Inductance QS.R.F. Sensitivity Frequency
1.0mH5.0mH Min. 30 1000kHz 41mV/µT (5.0mH) 125kHz
※Thisspecificationmightbechangedwithoutnoticeduetounderdevelopingandimproving.Thankyouforyourunderstanding.
NEWNEWNEW
CAS19D17C
51
For xDSL LINE TRANSFORMER & SPLITTER COILS
For xDSL LINE TRANSFORMER & SPLITTER COILS
K DIMENSIONS(mm)
K SCHEMATICS
6
8
7
5
1
3
2
4
LINE
(PRI)
CHIP
(SEC)
It is a xDSL line transformer which corresponds to the smaller foot
print demand for limited equipment installation space in central
offices.
Application is the xDSL line transformer used in central offices.
Line Transformer
■OUTLINE
CEP79
Impedance (1–4)
Designed to reflect 100Ωon the PRI with 100Ωload on SEC.
Inductance (1–4) 850µH ±10% (10kHz 0.1V) 2+3 tie
Turns Ratio 1 : 1 (±1%) (PRI : SEC)
Leakage Inductance (1–5)
3.6µH (TYP) (100kHz 0.1V) 2+3, 6+7 tie, 5+8 short
D.C.R (1–3) 1.2Ω(TYP) (20˚C)
D.C.R (2–4) 0.9Ω(TYP) (20˚C)
D.C.R (5–7) 0.85Ω(TYP) (20˚C)
D.C.R (6–8) 0.8Ω(TYP) (20˚C)
Insertion loss 0.1dB(TYP) (30kHz–1.1MHz)
Total Harmonic Distortion
–75dB(TYP) (40kHz, 5.3Vrms)
–90dB(TYP) (100kHz, 5.3Vrms)
Longitudinal Balance 70dB(TYP) (100kHz) (6, 7 GND)
Isolation Voltage
1875Vrms
1SEC (50Hz/60Hz) between PRI-SEC
K SPECIFICATIONS
Longitudinal Balance : This characteristic was measured with our longitudinal test circuit boad.
◆APPLICATION
Linetransformerforcontroloperationside.
RM4
RM6
EEH1313
EEH1617
CEP79
CPFC85
CEP1311 CEP1311C
CEP811 EP1311
TEL
PC
For xDSL LINE TRANSFORMER & SPLITTER COILS
52
For xDSL LINE TRANSFORMER
For xDSL LINE TRANSFORMER
Application is the xDSL line transformer.
■OUTLINE
K ELECTICALSPECIFICATIONS
Paramenter Conditions Limit Units Tolerance
Inductance(OCL) lineside,10kHz,0.1V,(16–9)［tie11+14］ 700 μH ±6％
TurmsRatio(T/R) chip-Tx:line=(1–4):(16–9)［tie2+3,11+14］ 1:3.95 N/A +1.5%
–1.0%
chip-Rx:line=(5–8):(16–9)［tie6+7,11+14］ 1:2.04 N/A ±1.5％
TotalHarmonicDistortion(THD) TxandRxwindings,20kHz,5.3Vrms–87 dB Max.
LeakageInductance(LL) 100kHz,0.1V,(16–9)［tie1+4,2+3,11+14］ 32 μH Max.
100kHz,0.1V,(16–9)［tie5+8,6+7,11+14］ 32 μH Max.
LongitudinalBalance(LB) 35kHz-650kHz(16–9)［tie11+14］ 53 dB Min.
DCResistance(DCR) lineside,(16–9)［tie11+14］ 3.5 Ω Max.
chipside-Tx,(1–4)［tie2+3］ 0.98 Ω Max.
chipside-Rx,(5–8)［tie6+7］ 1.74 Ω Max.
InterwindingCapacitance(Cww) 100kHz,0.1V,(1–16)［tie2+3,11+14］ 50 pF Max.
100kHz,0.1V,(5–16)［tie6+7,11+14］ 50 pF Max.
DielectricBreakdownIsolation 1sec,(1–16)［tie2+3,4+5,6+7,11+14］ 1875 Vr ms Min.
(equivalentto1min,1500Vrms)
Impedance reflectedonlineside 100 Ω Non.
loadonchipside,Tx 5.6 Ω Non.
loadonchipside,Rx 300 Ω Non.
OperatingTemperature –40to+85 ℃ Non.
xDSL LINE TRANSFORMER
K DIMENSIONS(mm)
CPE1311C
NEWNEWNEW
13.5MAX.
[.531]
12.3MAX.
[.484]
17.3MAX.
[.681]
sumida
C10113A
Country of Origin
Date Code
Pin 1. Pin numbers increment
clockwise around the part.
0.5±0.1
[.020±.004]
12x
1.7±0.2
[.067±.008]
7x
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
Tx
Rx
CHIP LINE
TERMINAL CONNECTION
(BOTTON VIEW)
POLARITY
16.1
[.634]
3.4
[.134]
5.1
[.201] 2x
2.2
[.087]
12x
1.7
[.067]
7x
1.0
[.039]
12x
11.9±0.25
[.469±.010]
K FEATURES
・ApprovedbyGlobespanVirataforusewiththefollowingchipsets：
ArgonTM Ⅱ/ⅡPlus,ArgonTMⅢ/Ⅲ Plus,CentragateTM,TitaniumTM
Ultra/UltraPlus,andVikingTMⅡ
・SuperbTHDperformance
(-93dBtyp.from20kHz,TxandRxwindings)
・ComplieswithEN60950/UL60950/BABT/TU
.. Vsupplementary
insulationrequirmentsforworkingvoltagesupto250Vrms
53
For xDSL LINE TRANSFORMERS
For xDSL LINE TRANSFORMERS
CEP1311 K DIMENSIONS(mm)
K DIMENSIONS(mm)
EP1311
K FEATURES
・ApprovedbyTIforusewiththefollowingchipsets：
AR7,AR7V,AR7VWi.
C10120&T10120forAnnexA,C.
C10121&T10121forAnnexB.
・SuperbLBfrom30kHzto1.1MHz
・ComplieswithEN60950/BABT/TUVsupplementary
insulationrequirmentsforworkingvoltagesupto250Vrms
K SCHEMATICS
K ELECTRICALSPECIFICATIONS
KTERMINALLAYOUT
Sumida Part No. INDUCTANCE (Ls)1–4 TURNS RATIO LL MAX (1–4) THD MAX (dB) LB MAX (dB) DCR MAX (Ω)IMPEDANCE
Type 10kHz, 0.1V, (2+3)Tie (10-7):(1–4) 100kHz, 0.10Vac 100kHz, 5.3Vrms 30kHz-1.1MHz (1–4)/(10–7) (1–4)/(10–7)
CEP1311 C10120 1.5mH ±6% WITHIN 1:2(+–2%) 14uH (2+3, 8+9)Tie –90db 60db 1.82/0.76 100Ω/25Ω
CEP1311 C10121 400uH ±5% WITHIN 1:2(+–2%) 7uH (2+3, 8+9)Tie –90db 60db 0.63/0.33 100Ω/25Ω
EP1311 T10120 1.5mH ±6% WITHIN 1:2(+–2%) 14uH (2+3, 8+9)Tie –90db 60db 1.82/0.76 100Ω/25Ω
EP1311 T10121 400uH ±5% WITHIN 1:2(+–2%) 7uH (2+3, 8+9)Tie –90db 60db 0.63/0.33 100Ω/25Ω
Application is the xDSL line transformer.
■OUTLINE
xDSL LINE TRANSFORMER
C10120
sumida
13.5 MAX.
[.531]
12.3 MAX.
[.484]
2.5±0.25
[.098±.010]
8x
10 6
17.7 MAX.
[.697]
Pin 1. Pin numbers increment
clockwise around the part.
Country of Origin
Date Code
0.65±0.20
[.026±.008]
10x
15
13.1MAX.
[.516]
13.8MAX.
[.543]
14.0MAX.
[.551]
15
6
10
Pin 1. Pin numbers increment
clockwise around the part.
Country of Origin
Date Code
φ0.6±0.2
[φ.024±.008]
10.0±0.3
[.394±.012]
5.3±0.5
[.209±.020]
10.0±0.3
[.394±.012]
2.5±0.3
[.098±.012]
10x
(BOTTOM VIEW)
POLARITY
CHIPLINE
1
2
3
4
5
10
9
8
7
6
10 x [φ.035]
φ0.9
[.098]
2.5
[.394]
10.0
[.394]
10.0
K SCHEMATICS
KRECOMENNEDLAND PATTRNS
(BOTTOM VIEW)
POLARITY
CHIPLINE
1
2
3
4
5
10
9
8
7
6
10 x [.100]
2.54
10 x [.051]
1.3
8 x [.098]
2.5
[.394]
10.0
[.650]
16.5
54
For xDSL POTS SPLITTER COILS
For xDSL POTS SPLITTER COILS
It is pot splitter coil for xDSL. correspondence with each ITU-T
(Annex-A/E/C) standard.
Using EE core for compatibility and competitive cost merit.
■OUTLINE
xDSL POTS SPLITTER COILS
K DIMENSIONS(mm)
10
ø0.6
14.0MAX.
14.0MAX. 5.313.0MAX.
4 - 2.5
K SCHEMATICS
EEH1313
1
56
10
K DIMENSIONS(mm)
ø0.6
15.5MAX. 124.017.6MAX.
17.0MAX.
5 - 2.5
K SCHEMATICS
EEH1617
1
67
12
◆OUTLINE
ApotsplittercoilforADSLSplitter.
◆FEATURES
CorrespondencewitheachITU-T(Annex-A/E/C)standard.
UsingEEcoreforcompatibilityandcompetitivecostmerit.
◆APPLICATION
ADSLSplitter
◆Weight
5g
◆SPECIFICATIONS
PartNo. Inductace
D.C.R
50M-020 2.4mH (Typ.)(at1kHz,0.1V) 2.7Ω(Typ.)
50M-021 0.983mH (Typ.)(at1kHz,0.1V) 1.0Ω(Typ.)
50M-022 0.712mH (Typ.)(at1kHz,0.1V) 0.9Ω(Typ.)
◆OUTLINE
InductoravailableforADSLSplitter.
◆FEATURES
CorrespondencewitheachITU-T(Annex-A/E/C)standard.
UsingEEcoreforcompatibilityandcompetitivecostmerit.
◆APPLICATION
ADSLSplitters
◆SPECIFICATIONS
◆Weight
10g
K ApplicationCircuit
Input
Input
ADSL & POTS
Signals
Output
Capacitor
Inductor
UU16LF EEH1313 EEH1617 EEH1617
Choke Inductor Inductor
Capacitor Capacitor
Output
POTS Signal
Only
C4C6
C5
C1C2C3
L3L2L1
C7
PartNo. Inductace
D.C.R
50M-026 10.5mH(Typ.)(at1kHz,0.1V) 5.8Ω(Typ.)
50M-027 4.5mH(Typ.)(at1kHz,0.1V) 2.3Ω(Typ.)
50M-028 4.0mH(Typ.)(at1kHz,0.1V) 2.2Ω(Typ.)
55
For xDSL POTS SPLITTER COILS
For xDSL POTS SPLITTER COILS
xDSL POTS SPLITTER COILS
RM4 K DIMENSIONS(mm)
0.50
[0.020]
3.0
[0.120]
10.92 MAX
[0.430]
35
62
13.00 MAX
[0.512]
13.00 MAX
[0.512]
53
26
RM6 K DIMENSIONS(mm)
20.00 MAX
[0.787]
20.00 MAX
[0.787]
PIN 3 INDICATOR
35
26
0.50
[0.020]
3.0
[0.120]
13.00 MAX
[0.512]
53
62
K SPECIFICATIONS
T= Through Hole
K SPECIFICATIONS
T= Through Hole
◆FEATURES
• Small footprint for Central Office applications
• For use with Legerity's Intergrated Voice and Data (IVD)
solution
• Customized inductance values available
◆FEATURES
• Excellent Longitudinal Balance
• For use with Legerity's Intergrated Voice and Data(IVD)
solution
• Customized inductance values available
CEEH1011 K DIMENSIONS(mm)
K SPECIFICATIONS
◆FEATURES
• Small footprint for Central Office applications
• For use with Legerity's Intergrated Voice and Data (IVD) solution
• Customized inductance values available
NEWNEWNEW
SEC
(DEVICE)
PRI
(LINE)
(BOTTOM VIEW)
POLARITY
3
2
6
5
SEC
(DEVICE)
PRI
(LINE)
3
2
6
5
(BOTTOM VIEW)
POLARITY
2.54 mm GRIDS ø1.4mm X 2
ø1.0 X 4
CONNECTING PIN PATTERN:
T15107 8.74 8.46 4.00 8µH-85db 65db 26/26
PartNo. LLMAX
100kHz,0.10Vac
THDMAX(dB)
50kHz,12.3Vrms
LBMAX(dB)
200Hz-3200Hz
DCRMAX(Ω)
PRI/SEC
InductanceMIN(mH)
20kHz
0.1Vac,0Adc
20kHz
0.1Vac,0.12Adc
20kHz
0.1Vac,0.23Adc
T15101 6.44 6.30 4.00 8µH-85db 65db 11/11
T15102 8.74 8.46 4.00 8µH-85db 65db 13.6/13.6
PartNo. LLMAX
100kHz,0.10Vac
THDMAX(dB)
50kHz,12.3Vrms
LBMAX(dB)
200Hz-3200Hz
DCRMAX(Ω)
PRI/SEC
InductanceMIN(mH)
20kHz
0.1Vac,0Adc
20kHz
0.1Vac,0.12Adc
20kHz
0.1Vac,0.23Adc
C15100 8.74 8.46 4.00 25µH-85db 65db 26.0/26.0
PartNo. LLMAX
100kHz,0.10Vac
THDMAX(dB)
50kHz,12.3Vrms
LBMAX(dB)
200Hz-3200Hz
DCRMAX(Ω)
PRI/SEC
InductanceMIN(mH)
20kHz
0.1Vac,0Adc
20kHz
0.1Vac,0.12Adc
20kHz
0.1Vac,0.23Adc
20kHz
0.1Vac,0.46Adc
C15108 3.42 3.40 11µH-85db 65db 18.5/18.51.00
12.0MAX. 12.0MAX. 8.40±0.20
4×1.00
10.8MAX.
8.40±0.20
4×2.74 4×1.40
9.16
K SCHEMATICS
K SCHEMATICS
K SCHEMATICS
K
RECOMENNEDLAND PATTRNS
CONNECTING PIN PATTERN:
2.5 mm GRIDS
ø1.0 x 4
56
For xDSL COMMON MODE CHOKE COIL
For xDSL COMMON MODE CHOKE COIL
SMD Common Mode Choke avail for xDSL modem.
This is small size, SMD and having that impedance is 15kΩat
1.0MHz.
■OUTLINE
xDSL COMMON MODE CHOKE COIL
K DIMENSIONS(mm)
0.9
1.8
6.9
3.4
5.5MAX.
0.05
7.2
8.2MAX.
9.3MAX.
0.5
CPFC85
K SCHEMATICS
S
S
32
41
K IMPEDANCE/COMMONMODEATTENUATIONCHAR.
FREQUENCY(MHz)
IMPEDANCE(Ω)
Impedance cha.
0.001 0.01
100
1k
10k
100k
10
10.1 1 10 100
ATTENUATION(dB)
FREQUENCY(MHz)
Common mode attenuation cha.
–10
0
–20
–30
–40
–50
0.01 0.1 1 10 100
INDUCTANCE Min. 3.3mH 100kHz
D. C. R (1–4) (2–3) Max. 0.6Ω
IMPEDANCE (1–4) (2–3) Min. 2.3Ω100kHz
IMPEDANCE (1–4) (2–3) Min. 9.8Ω1MHz
IMPEDANCE (1–4) (2–3) Min. 4.2Ω10MHz
COMMON MODE ATTENUATION 30 dB(typ.) 100kHz
COMMON MODE ATTENUATION 43 dB(typ.) 1MHz
COMMON MODE ATTENUATION 38 dB(typ.) 10MHz
WITHSTAND VOLTAGE (line-line) Min. 700Vrms (2 sec.) 50Hz/60Hz
K ELECTRICALSPECIFICATIONS
◆FEATURES
1.EMI Filter of 15kΩ Impedance at
1.0MHz.
2.Smallsize.
3.ReflowsolderingispossibleasSMDtype.
◆APPLICATION
1.ADSLModem
2.Telecomapplications
57
STB/FAX/MODEM TRANSFORMERS
STB/FAX/MODEM TRANSFORMERS
This is a Fax modem transformer of V.32(9.6kbps) to V.92 (56kbps)
conformity.
It is a UL/BABT authorization article.
■OUTLINE
STB/FAX/MODEM TRANSFORMERS
K DIMENSIONS(mm)
2
34
1
ø0.6 [0.024]
16.60 MAX
[0.654]
16.60 MAX
[0.654]
10.50 MAX
[0.413]
3.50 (+1.0/-0.5)
[0.138 (+0.004/-0.020)]
sumida
COO
(BOTTOM VIEW)
4
1
(LINE)
PRIMARY
2
(MODEM)
SECONDARY
3
PRIMARY OR SECONDARY
INTERCHANGEABLE
MIT-400L
XX-XX
K SCHEMATICS
MT1610/MT1610B
K SPECIFICATIONS
MIT4033L
MIT2050L
MIT250L
MIT400L
V.92
V.92
V.34
V.32bis
PartNo. Speed
600:420
600:560
600:560
600:600
Impedance(
Ω)
PRI:SEC
-85
-87
-84
-62
THD@600Hz
(dB)
1.90
1.55
1.55
1.80
IL(dB)
20
17
17
14
RL(dB)
3.7
17
17
15
LL
(mH)
82/106
70/70
70/70
70/70
DCR(Ω)
PRI:SEC
◆FEATURES
• Internationally Safety Approved
for Supplementary Isolation
• EN 60950/BABT/TÜV
• Low cost
• V.92 (56kbps) to V.32 bis
(14.4kbps) THT fax/modem
transformer
• Reinforced safety encapsulated
versions also available
K DIMENSIONS(mm)
2.79 / 3.56
[0.110 / 0.140]
12.45 MAX
[0.490]
23.0 MAX
[0.906]
24.0 MAX
[0.945] TERM NO.'S FOR REF
4
1
(BOTTOM VIEW)
(LINE)
PRIMARY
2
(MODEM)
SECONDARY
3
XX-XX
sumida
MIT-6120
COO
23
14
K SCHEMATICS
MT2212
◆FEATURES
• Internationally Safety Approved
for Supplementary Isolation
• EN 60950/BABT/TÜV
• Low cost
• V.32 (9.6 kbps) THT fax/modem
"Wet" Transformer
("Wet" means ability to withstand
some current.)
K SPECIFICATIONS
MIT6120
MIT4115V
V.32
V.32
PartNo. Speed
600:301
600:470
Impedance(
Ω)
PRI:SEC
3.75
2.65
IL(dB)
17
14
RL(dB)
11
7.5
LL
(mH)
152/152
110/128
DCR(Ω)
PRI:SEC
65
100
DCCurrentPRI
(mADC)
K MIT4033LApprovedByTDKusefor79M1903chip.
K MIT4115VApprovedByTDKusefor73M2901,
73M2901cand73C2901CLchip.
58
STB/FAX/MODEM TRANSFORMERS
STB/FAX/MODEM TRANSFORMERS
STB/FAX/MODEM TRANSFORMERS
K DIMENSIONS(mm)
INTERCHANGEABLE
PRIMARY OR SECONDARY
(BOTTOM VIEW)
PRIMARY
(LINE)
3
1
SECONDARY
(MODEM)
4
6
15.55
[0.612]
1.52
[0.059]
321
2.54
[0.100]
3.33
[0.131]
456
14.65 MAX
[0.577]
0.80
[0.033]
132
2.54
[0.100]
645
7.10 MAX
[0.279]
12.70 MAX
[0.500]
9.75 MAX
[0.384]
sumida
ESMIT-100
COO
XX-XX
C
R
R
K LANDPATTERNS(mm)
CMT97B
◆FEATURES
• Internationally Safety Approved
for Reinforced Isolation
• EN 60950/BABT/ÜV
• V.92 (56kbps) to V.32 bis
(14.4kbps) encapsulated SMT
fax/modem transformer
K SPECIFICATIONS
ESMIT3300
ESMIT3181
ESMIT300
ESMIT190
ESMIT100
V.92
V.92
V.92
V.32bis
V.32bis
PartNo. Speed
600:260
600:280
600:330
600:420
600:390
Impedance(
Ω)
PRI:SEC
-89
-90
-84
-78
-80
THD@600Hz
(dB)
3.50
4.60
2.50
1.85
2.0
IL(dB)
20
20
22
21
24
RL(dB)
10.3
9.3
7.5
4.6
5.6
LL
(mH)
180/180
235/260
150/150
90/90
115/115
DCR(Ω)
PRI:SEC
K DIMENSIONS(mm)
5.2MAX
3
4
2.54 3.5MAX
21
9.14 7.1MAX
S3045
XXXX
0.5
1.40
[0.055]
2.54
[0.100]
1.40
[0.055]
9.65
[0.380]
2
1 : 2.00
(BOTTOM VIEW)
14
3
PRIMARY
(LINE) SECONDARY
(MODEM)
CBM5D33
◆FEATURES
• Safety standard approved
• V.92 (56 kbps) Digital Isolation Barrier for
Conexant DAAs
K DIMENSIONS(mm)
2
1 : 1.67
(BOTTOM VIEW)
14
3
PRIMARY
(LINE) SECONDARY
(MODEM)
2.54
[0.100] 5.2 MAX
[0.205]
7.1 MAX
[0.280]
2.40 MAX
[0.094]
0.50
[0.020]
9.14
[0.360] 9.65
[0.380]
2.54
[0.100]
1.84
[0.072]
1.40
[0.055]
4154
COO XXXXX
12
3
4
CBM5D20
◆FEATURES
• EN 60950/BABT/ÜV
• V.92 (56kbps) Digital Isolation Barrier for
Conexant DAAs
K SPECIFICATIONS
EMIT4152
EMIT4153
EMIT4155
V.92
V.92
V.92
1:2.6
1:2.0
1:1.67
4
4
3
PartNo. Speed Turns
Ratio
Cww
(pF)
40
40
30(at10kHz)
LsPRI@100KHz
Min.(µH)
8.0
8.0
8.0
SelfResIR
(MHz)
0.250/0.450
0.250/0.450
0.250/0.325
D.C.R(Ω)
PRI/SEC
K SPECIFICATIONS
ESMIT4163
ESMIT4165
V.92
V.92
1:2.0
1:1.67
0.250/0.450
0.250/0.325
PartNo. Speed Turns
Ratio
D.C.R(Ω)
PRI/SEC
40
30(at10KHz)
LsPRI@100kHz
Min.(µH)
K SCHEMATICS
K LANDPATTERNS(mm) K SCHEMATICS
K LANDPATTERNS(mm) K SCHEMATICS
59
STB/FAX/MODEM TRANSFORMER
STB/FAX/MODEM TRANSFORMER
STB/FAX/MODEM TRANSFORMER
K DIMENSIONS(mm)
2
34
1
10.5MAX.
[0.413]
3.5
[0.138]
16.6MAX.
[0.654]
ø0.6[0.024]
sumida
MIT4040
COO
XX-XX
19.6MAX.
[0.654]
MT1910
1
43
2
ø1.0x4
[ø0.039]
12.7
[0.500]
7.6
[0.300]
TERMINAL C
O
(BOTTO
M
1
(LINE)
PRIMARY
2
STAMP
SUPPLIER NAME
DATE CODE
COUNTRY OF ORIGIN
SUPPLIER P/N
DOT LOCATES
TERMINAL #1 COO
XX-XX
MIT4040
sumida
4
1
(LINE)
PRIMARY
2
(MODEM)
SECONDARY
3
K TERMINALLAYOUT
(BOTTOM VIEW)
K SPECIFICATIONS
PARAMETERS CONDITIONS MIN TYP MAX UNITS
Impedance Reflected on Primary – 600 – Ohms
With Load on Secondary – 530 – Ohms
Total Harmonic Distortion @ 600 Hz, -10 dBm – −80 – dB
Insertion Loss Per IEEE method; @ 1000 Hz – ―1.00 dB
Dielectric Rating 1 Minute 1500 – – Vrms
Trip Leakage Current – – 200 µA
DC Resistance @ 20℃, ± 10 % Primary Winding – 37 – Ohms
Secondary Winding – 37 – Ohms
DC Current in Primary – – 0 – mADC
Turns Ratio Primary to Secondary; ± 2% – 1 : 1 – –
◆FEATURES
• V.32 (9.6kbps) THT fax/modem "Dry" Transformer. ("Dry" means un-ability to withstand Current).
K SCHEMATICS
60
STB/FAX/MODEM TRANSFORMERS
STB/FAX/MODEM TRANSFORMERS
STB/FAX/MODEM TRANSFORMERS
MIT-6101/MIT-6225 style
K DIMENSIONS(mm)
K SPECIFICATIONS
MIT-6101
MIT-6225
V.32
V.34
PartNo. Speed
600:260
600:260
Impedance(
Ω)
PRI:SEC
-60.0
-79.0
THD@600Hz
(dB)
3.5
3.3
IL(dB)
8.0
10.0
RL(dB)
19.0
19.0
LL
(mH)
170/170
170/170
D.C.R(Ω)
PRI:SEC
50(Typ)
50(Typ)
DCCurrentPRI
(mADC)
3
4
2
1
TERM NO'S FOR REF.
2.79 / 3.56
[0.110 / 0.140]
24.0 MAX
[0.945]
XX-XX
R
C
sumida
MIT-6101
MEXICO
R
23.0 MAX
[0.906]
12.0 MAX
[0.472]
ピンナンバー
2
1.52 [0.060]
TYP.(4)
3
13.97
[0.550]
41
11.43
[0.450]
SECONDARY
(MODEM)
3
4
2
PRIMARY
(LINE)
1
一次側
（ライン）二次側
（モデム）
MIT-4177 style
K DIMENSIONS(mm)
3
4
1
6
PIN SQ = 0.64 [0.025]
TYP.(4)
MIT-4177
sumida
XX-XX
R
R
MEXICO
C
TERM. NO. 1
11.70 MAX
(0.460)
3.30 / 4.07
(0.130 / 0.160)
16.52 MAX
(0.650)
16.52 MAX
(0.650)
3
412.7
[0.500]
ø1.0 [ø0.039]
TYP.(4)
1
6
7.6
[0.300]
43
16
SECONDARY
(MODEM)
PRIMARY
(LINE)
一次側
（ライン）
二次側
（モデム）
K SPECIFICATIONS
MIT-4177
MIT-3177
V.92/V.90
V.92/V.90
PartNo. Speed
600:301
600:301
Impedance(
Ω)
PRI:SEC
-95.0
-92.0
THD@600Hz
(dB)
3.0
2.6
IL(dB)
18.0
20.0
RL(dB)
7.8
3.3
LL
(mH)
135/135
150/150
DCR(Ω)
PRI:SEC
K TERMINAL LAYOUT K SCHEMATICS
(BOTTOM VIEW)
K TERMINAL LAYOUT K SCHEMATICS
(BOTTOM VIEW)
61
STB/FAX/MODEM TRANSFORMERS
STB/FAX/MODEM TRANSFORMERS
STB/FAX/MODEM TRANSFORMERS
MT1812B
K DIMENSIONS(mm)
K DIMENSIONS(mm)
PIN SQUARE = 0.6 MM MAX
8
5
4
1
RR
C
EMIT-400L
sumida
18.3MAX
[0.720]
XX-XX
MEXICO
12.6MAX
[0.496]
0.3
[0.012]
18.3MAX
[0.720]
3.2±0.4
[0.125 ±0.015] ø1.0 X 4
[ø0.039]
4
5
81
12.7
[0.500]
7.6
[0.300]
54
81
PRIMARY OR SECONDARY
INTERCHANGABLE
SECONDARY
(MODEM)
PRIMARY
(LINE)
K SPECIFICATIONS
EMIT-2001L
EMIT-2050L
EMIT-200L
EMIT-1250L
EMIT-200L
EMIT-400L
V.92/V.90
V.92/V.90
V.34
V.34
V.32bis
V.32bis
PartNo. Speed
600:560
600:560
600:560
600:560
600:560
600:600
Impedance(
Ω)
PRI:SEC
-93.0
-87.0
-85.0
-84.0
-74.0
-62.0
THD@600Hz
(dB)
1.2
1.55
1.6
1.2
1.5
1.8
IL(dB)
18.0
17.0
17.5
18.0
14.0
14.0
RL(dB)
16.0
17.0
17.0
15.7
12.1
15.0
LL
(mH)
67/67
70/70
70/70
67/67
67/67
70/70
D.C.R(Ω)
PRI:SEC
PIN SQ = 0.6 [0.024]
TYP.(4)
8
5
4
1
R
R
C
EMIT-4035L
sumida
18.3 MAX
[0.720]
XX-XX
MEXICO
12.6 MAX
[0.496] 0.3
[0.012]
18.3 MAX
[0.720]
3.2±0.4
[0.125± 0.015]
ø1.0 [ø0.039]
TYP.(4)
4
5
81
12.7
[0.500]
7.6
[0.300]
5
SECONDARY
(MODEM)
4
18
PRIMARY
(LINE)
K SPECIFICATIONS
EMIT-4035L
EMIT-4031L
V.92/V.90
V.32
PartNo. Speed
600:420
600:600
Impedance(
Ω)
PRI:SEC
-92.0
-73.0
THD@600Hz
(dB)
1.55
1.1
IL(dB)
22.0
18.0
RL(dB)
2.7
1.1
LL
(mH)
82/106
55/62
D.C.R(Ω)
PRI:SEC
MT1812
◆FEATURES
• Internationally Safety Approved for Reinforced Isolation
• EN 60950/BABT/TÜV
• V.92 (56kbps) to V.32 bis (14.4kbps) encapsulated THT fax/modem
transformer
K TERMINAL LAYOUT K SCHEMATICS
(BOTTOM VIEW)
K TERMINAL LAYOUT K SCHEMATICS
(BOTTOM VIEW)
62
LAN PULSE TRANSFORMERS
LAN PULSE TRANSFORMERS
LAN PULSE TRANSFORMERS
K DIMENSIONS(mm)
0.25
9.7MAX.
2.5MAX.
6.5
4.6 1.27
2.54
0.5
CLP42
K DIMENSIONS(mm)
9.0MAX. 2.5MAX.
0.25
2.54
6.5
9.7MAX.
1.27 0.5
CLP82
This is very low profile SMD pulse transformer.
This is used whether pulse transformer or common mode choke
coil.
■OUTLINE
K SPECIFICATIONS
CLP42ｰ500 1:1 50 0.3 6.0 0.25 0.8
CLP42ｰ750 1:1 75 0.35 8.0 0.3 1.0
CLP42ｰ101 1:1 100 0.3 9.0 0.3 1.1
CLP42ｰ151 1:1 150 0.3 10.0 0.3 1.3
CLP42ｰ201 1:1 200 0.3 10.0 0.3 1.5
CLP82ｰ401 TX:RX 1CT:1CT 400 0.25 10.0 0.7 1.2
PartNo.
Turnsratio
(±5%)
Inductance
(µH)
Leakageinductance
Max.(µH)
Linecapacitance
Max.(pF)
D. C. R
Max.(Ω)
ET-product
Min.(µSec・V)
◆SPECIFICATIONS
TheseareverylowprofileSMDpulsetransformersused in PCMCIAcards.
CLP42:Builtineitheronepulsetransformeroronecommon-modechokecoil.
CLP82:Builtineithertwoorthreepulsetransformersortwo orthreecommon-modechokecoils.
63
10/100 BASE PULSE TRANSFORMERS
10/100 BZSE PULSE TRANSFORMERS
10/100 BASE PULSE TRANSFORMERS
This is a pulse transformer + filter module for LAN 10/100Base-T
(IEEE802.3).
■OUTLINE
K DIMENSIONS(mm)
11.8
1.27 1.27 1.27 1.273.81
12-0.5 (3.05)
0.2
11.4
6.0
9.4
K SCHEMATICS
1
3
2
14
16
Tx
1:1
1CT : 1CT
Rx 1CT : 1CT
15
7
6
9
8
10
11
CLP11D30
K ELECTRICALSPECIFICATIONS
K DIMENSIONS(mm)
11.2 0.2
6.9MAX.
0.55
7-2.54
12.9MAX.
9.2
23.5MAX.
K SCHEMATICS
RD+ 1
RD– 2
CT 3
TD–
15
CT
14
TD+
16
RX
7
CT
5
RX–
6
TX–
11
CMT
12
TX+
10
CLP236
Thisfiltermoduleisused inLAN10/100BASE–T(IEEE802.3)ofPersonalComputercards.
K ELECTRICALSPECIFICATIONS
RX TX
Insertion Loss (0.1〜100MHz) 1.0dB Max. 1.0dB Max.
Return Loss
(0.1〜60MHz) 19dB typ. 18dB typ.
(60〜100MHz) 14dB typ. 14dB typ.
Differential to common (0.1〜60MHz) 43dB Min. 43dB Min.
mode rejection ratio (60〜100MHz) 40dB Min. 40dB Min.
Inductance
(100KHZ) 350µH Min.
Voltage Isolation 1500 Vrms Min. For 1 Minute
Part No. Turns Ratio
RX TX
SD68515 1CT : 1CT 1CT : 1CT
SD68517 1CT : 1CT 1CT : 1CT
SD49783 1CT : 1CT 1.4CT : 1CT
SD1013 1CT : 1CT 1.4CT : 1CT
SD49743 1CT : 1CT 2CT : 1CT
Operating frequency f=0.1~100MHz
Inductance
350µH or more（f=100kHz, 0.5V）
Insertion Loss 1.0dB below（f=0.1=100MHz）
Return Loss
16dB or more（f=30MHz）
Differential to common mode rejection 40dB or more（f=30MHz）
Crosstalk 40dB or more（f=30MHz）
Voltage Isolation AC1650V 6sec.
K LANDPATTERNS(mm)
2.62.6 7.6
0.8
P2–1.27 P2–1.27
3.81
9.69
NEWNEWNEW
64
RADIO CONTROL CLOCK ANTENNAS
RADIO CONTROL CLOCK ANTENNAS
RADIO CONTROL CLOCK ANTENNAS
It is the radio controlled clock antenna with capacitor which is
already preset for resonant frequency.
■OUTLINE
K DIMENSIONS(mm)
28.0MAX.
28.7
6.0MAX.2.0
22.0 2.0
ø5.0
7.3MAX.
5.0
ACL27
K SPECIFICATIONS
PartNo. TuningFrequency
TuningImpedance
Sensitivity
(60dBµV/m) (50dBµV/m) (40dBµV/m)
ACL27-40 40.0±0.20kHz within Min. 80kΩ8.91µV (output volt) 2.64µV 0.89µV
ACL27-60 60.0±0.20kHz within Min. 65kΩ11.03µV 3.26µV 1.10µV
K DIMENSIONS(mm)
10.0
7.5
14.0
83.0MAX.
65.0
60.0
5.05.0
7.5
ø0.7
3.0
19.5MAX.20.5MAX.
ACL80A/B
K SPECIFICATIONS
PartNo. Spec. No. Inductance Resonant Capacitor Resonant Frequency Suitable IC
40K08S S-074-094 588µH 27000pF 40kHz, 60kHz LA1650
Resonant frequencies (40kHz, 60kHz) are preset by suitable inductance and capacitors
65
AUDIO / VIDEO FILTERS
AUDIO / VIDEO FILTERS
7.5MAX.
7.3MAX.
0.5
2.0 2.0
7.6
6.2
1.27.3MAX.
1. By combining 1 to 2 pieces, various
kinds of LC filter combinations are
possible.
※CFB-6,CFB2-6
2. Low profile type (7.5 mm Max.)
※CFB-6,CFB2-6
3. Two capacitors are able to be built in
1coil, therefore an additional capacitor
is unnecessary.
4. Surface mounting on PCB and reflow
solding is possible ※CFB-6,CFB2-6
AUDIO FILTERS
CFB-6
1.0
0.5
1.2
7.5MAX.7.3MAX.
14.0MAX.
2.02.02.72.0 2.0
7.6
6.7 6.2
6.7
CFB2-6
3.011.5MAX.
7.8MAX.
7.8MAX. 5.5
5.5
1.0 ø0.5
FB-7DG
0.4
1.6 1.6
5.0MAX.
6.05.1MAX.5.0MAX.
1. Filter with shield case
2. From 1 to 3 pieces combinations are
possible for low pass, high pass, band
pass and delay lines
3. Low profile (H: 5.2MAX mm)
4. Two capasitors are able to be built in 1
coil.
5. Reflow soldering is possible.
VIDEO FILTERS
CY-4
1.6
10.0MAX.
1.6 1.6
0.4
1.6 1.6
6.05.2MAX.5.2MAX.
CY-4W
14.75MAX.
1.6 1.6 1.6 1.61.6 1.6
0.4
1.6 1.6
5.55.2MAX.5.2MAX.
CY-4T
K SPECIFICATIONS
PartsNo. Application Type Impedance Electriccharacteristics
CutｰoffFreq Delaytime Attenuation
Rin:Rout
2567–021 1.5MHz CY–4 1kΩ: 1kΩ1.5MHz (at 3.0dB) 320nS Min. 23dB (at 3.0 MHz)
L. P. F. at 1.0MHz Min. 40dB (at 5.0 MHz)
2569–T033 3.81MHz CY–4W 1kΩ: 1kΩ3.81MHz (at 3.0dB) 140nS Min. 25dB (at 4.8 MHz)
L. P. F. at 3.0MHz Min. 35dB (at 9.5 MHz)
2569–T021 10MHz CY–4W 1kΩ: 1kΩ10MHz (at 2.5dB) 32nS Min. 45dB (at 12.2 MHz)
L. P. F. at 0.2MHz Min. 51dB (at 14.3 MHz)
2567–026 5.06MHz CY–4 1kΩ: 1kΩ4.85MHz (at 3.0dB) Min. 20dB (at 3.8 MHz)
B. P. F. 5.25MHz (at 3.0dB) —Min. 17dB (at 6.3 MHz)
2567–034 4.21MHz CY–4 1kΩ: 1kΩ4.01MHz (at 2.5dB) Min. 25dB (at 2.94MHz)
B. P. F. 4.41MHz (at 2.5dB) —Min. 17dB (at 5.47MHz)
2570–T007 10.7MHz CY–4T 330Ω: 330Ω10.2MHz (at 2.5dB) 720nS Min. 15dB (at 9.7MHz)
B. P. F. 11.2MHz (at 2.5dB) at 10.7MHz
2569–T017 3.58MHz CY–4W 1kΩ: 1kΩ2.46MHz (at 3.0dB) 187nS Min. 15dB (at 1.0MHz)
B. P. F. 4.7MHz (at 3.0dB) at 3.58MHz Min. 17dB (at 7.0MHz)
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
66
IFT
IFT
1.2
3.8
5.7
1.51.5
0.4
3.4
2.2MAX.
5.1MAX.
5.1MAX.
Inductance : Max. 246µH
Operation Freq. : Max. 15MHz
Variable range of L : L±1.5%
IFT
CP-4LB
6.2
0.8
3.53.8MAX.
5.9MAX.
5.9MAX. 0.5
Inductance : Max. 800µH
Operation Freq. : Max. 15MHz
Variable range of L : L±2%
CP53
0.5
6.2
3.5
5.5MAX.
5.9MAX.
5.9MAX.
0.9
Inductance : Max. 1mH
Operation Freq. : Max. 15MHz
Variable range of L : L±3%
CP55
3.0
1.51.5
5.0
4.8MAX.
4.8MAX.
0.7 ø0.4
1.6
4.5MAX.
Inductance : Max. 680µH
Operation Freq. : Max. 25MHz
Variable range of L : L±3%
P-4SC
3.0
5.0
3.0
ø0.4
0.7
5.1MAX.
2.54.5MAX.
5.1MAX.
Inductance : Max. 680µH
Operation Freq. : Max. 25MHz
Variable range of L : L±3%
P-4SB
3.5
5.8
3.5
ø0.4
1.05
5.9MAX.
3.06.5MAX.5.9MAX.
Inductance : 1µH – 680µH
Operation Freq. : Max. 20MHz
Variable range of f & L : f±2%, L±4%
Internal capacitors : Max. 470pF
Good reliability characteristic
Hi Q type
P-5DJ
ø0.4
0.8
3.5
3.5
6.1MAX.
6.02.88.0MAX.
6.1MAX.
Inductance : 1µH – 820µH
Operation Freq. : Max. 20MHz
Variable range of f & L : f±2%, L±4%
Internal capacitors : Max. 470pF
PG57
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
4.5MAX.
6.1MAX.
6.1MAX.
0.8±0.2
0.5±0.1
3.5±0.2
6.2±0.2
（3.7）
Inductance : Max. 1mH
Operation Freq. : Max. 20MHz
Variable range of L : L±3%
CP54
4.5
ø0.51.0
7.6MAX.
4.5
7.5
3.08.7MAX.
7.6MAX.
Inductance : 1µH – 820µH
Operation Freq. : Max. 20MHz
Variable range of f & L : f±2%, L±4%
Internal capacitors : Max. 430pF
PG78
67
RF COILS
RF COILS
0.70.7
0.5 3.5
2.4MAX.
5.7MAX.
5.7MAX.
Inductance : Max. 1.5µH
Operation freq. : Max. 150MHz
Variable range of L : L±1%
RF COILS
CS-5LN
0.8
1.01.0
3.2
3.0
0.4
4.5MAX.
5.2MAX.
5.1MAX.
Inductance : Max. 1.0µH
Operation freq. : Max. 300MHz
Variable range of L : L±2%
CS-4
6.2
0.8
3.5
3.8MAX.
5.9MAX.
5.9MAX. 0.5
Inductance : Max. 5µH
Operation freq. : Max. 150MHz
Variable range of L : L±1%
CS53
5.9MAX.
6.2
0.9
0.5
5.9MAX. 5.5MAX. 3.5
3.7
Inductance : Max. 5µH
Operation freq. : Max. 150MHz
Variable range of f : f±1%
Internal capacitors : Max. 100pF
CS55
5.9MAX. 5.8
3.6
5.9MAX.
0.8 ø0.4
3.6
2.56.1MAX.
Inductance : 0.1µH – 1.0µH
Operation freq. : Max. 300MHz
Variable range of L : L±4%
S-5LE
7.9MAX.
5.9MAX. 5.8
3.6
5.9MAX.
ø0.4
3.6
2.8
0.8
Inductance : Max. 1.0µH
Operation freq. : Max. 300MHz
Variable range of f & L : f±2%, L±4%
Internal capacitors : Max. 56pF
S-5LF
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
4.5MAX.
5.9MAX.
5.9MAX.
0.8±0.2
0.5±0.1
3.5±0.2
6.2±0.2
（3.7）
（5.2）
Inductance : Max. 5µH
Operation freq. : Max. 150MHz
Variable range of L : L±1%
CS54
0.8
ø0.4
3.6
5.9MAX.
7.7MAX. 5.8
5.9MAX.
3.6
2.5
Inductance : Max. 30µH
Operation freq. : Max. 300MHz
Variable range of f & L : f±2%, L±4%
Internal capacitors : Max. 56pF
S-5CL3
7.8MAX.
4.5
3.0
7.6MAX. 4.5
1.0 ø0.5
8.5MAX.
Inductance : 0.1µH – 10µH
Operation freq. : Max. 300MHz
Variable range of f & L : f±2%, L±4%
Internal capacitors : Max. 100pF
S-7LC
68
QUADRATURE DETECTOR COILS, VCO COIL, HELICAL FILTER, ANTENNA LOADING COIL
QUADRATURE DETECTOR COILS, VCO COIL, HELICAL FILTER, ANTENNA LOADING COIL
K DIMENSIONS(mm)
ø0.4
0.8
6.02.5
8.2MAX.
1.5MAX.
1.81.8
2.6
6.1MAX.
6.1MAX.
QU57 K SPECIFICATIONS
Inductance : 0.1µH – 25µH
Operation freq. : Max. 15MHz
Variable range of f : f±1%
Internal capacitors : Max. 100pF
Low temperature coefficient
K DIMENSIONS(mm)
ø0.5 1.0
4.5
4.5
7.6MAX.
7.8MAX. 3.0
8.0MAX.
QU-7L K SPECIFICATIONS
Inductance : 0.1µH – 25µH
Operation freq. : Max. 30MHz
Variable range of f : f±1%
Internal capacitors : Max. 100pF
High Stability
Low temperature coefficient
QUADRATURE DETECTOR COILS
K DIMENSIONS(mm)
6.8 3.0
3.3
0.5
1.0
4.5
7.8MAX.
7.9
4.5
7.3
SM76
VCO COIL
K SPECIFICATIONS(REFERENCE)
TuningCapacitanceRange 10.5pF2%overvariable
(1-2) (at200MHz)
UnloadedQ 147(at200MHz)
MaximumTurn：31
/2T(ø0.5)
K DIMENSIONS(mm)
2.2
(0.5)
0.8 0.35
2.57.0MAX.
5.95MAX.
5.95MAX.
MG56 K SPECIFICATIONS
High inductance type used in LW band with high
sensitivity
ANTENNA LOADING COIL
K DIMENSIONS(mm)
6.3MAX. 7.0
8-0.6
5.65
3.2 3.2
3.1
4-0.8
6.0MAX.
0.6
11.5MAX.
2.2
1
8
7
65
4
3
2
CH56W
HELICAL FILTER
K SPECIFICATIONS
Center Frequency (F0) 480MHz
1dB Bandwidth at F0 Min.18MHz
Attenuation F080MHz Min.25dB
Attenuation F080MHz Min.19dB
Insertion Loss Max.3.5dB
Ripple in Passband Max.1dB
69
MOLD COILS, BALUN
MOLD COILS, BALUN
7.5
ø0.5
ø2.6
3.5
4.08.0MAX.
2.0MAX.
10.0MAX.
ø6.5MAX.
Inductance : 0.05µH – 0.1µH
Operation Freq. : Max. 200MHz
Variable range of L : L±3%
MOLD COILS
FEM-10BL
9.5MAX.
7.5MAX.
7.5MAX.
4.5
4.5
ø0.5
3.3
Inductance : 0.05µH – 0.1µH
Operation Freq. : Max. 200MHz
Variable range of L : L±3%
FEM-7BLN
ø0.5
4.09.0MAX.
8.5MAX.
6.5
ø4.8MAX.
Inductance : 0.05µH – 0.13µH
Operation Freq. : Max. 200MHz
Variable range of L : L±3%
FEM-85B
BALUN
2.54
0.4
5.05MAX.
4.0MAX.
3.8MAX.
2.8
Operation Freq. : 50MHz – 1GHz
CBM33
0.5
2.7
3.0
4.4MAX.
5.5MAX. 2.5MAX.
3.2
Operation Freq. : 100kHz – 1GHz
CBM42
1.75
9.55MAX.
1.75
0.5
0.5 0.5
3.15MAX.
6.4
5.95MAX.
Operation Freq. : 100kHz – 1GHz
CBM63
6.5MAX. 5.5MAX. 2.6
6.5MAX.
3.5
3.5
ø0.4
Operation Freq. : Max. 500MHz
BM-6N
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
70
FIXED INDUCTORS FOR TAPE RECORDER
FIXED INDUCTORS FOR TAPE RECORDER
FIXED INDUCTORS FOR TAPE RECORDER
6.0
2.0 2.0
6.1MAX
6.2MAX.
8.7MAX.
7.0
0.5
Inductance : Max. 10mH
Operation Freq. : Max. 500kHz
Max. operation power : 300mW(100kHz)
610mW(200kHz)
910mW(300kHz)
CMS65
36˚
ø10.0
ø8.0
ø0.5
3.510.0
Inductance : Max. 80mH
Operation Freq. : Max. 400kHz
MC-102
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
71
VARIABLE INDUCTORS
VARIABLE INDUCTORS
6.5MAX.7.3MAX.
1.3
7.6
6.2
1.2
7.3MAX.
0.5
4.0
Inductance : Max. 27mH
Operation freq. : 10 – 250kHz
Variable range of L : L±10%
VARIABLE INDUCTORS
CMG65
7.0MAX. 3.0 4.5
7.8MAX.
4.5
1.0 ø0.5
7.8MAX. 7.7
Inductance : Max. 4.5mH
Operation freq. : Max. 250kHz
Variable range of L : L±5%
M-7GLB
ø0.5
1.0
3.511.0MAX.8.2MAX. 4.5
8.2MAX.
4.5
Inductance : Max. 27mH
Operation freq. : Max. 500kHz
Variable range of L : L±8%
M-8G
9.0MAX. 3.0 4.5
7.8MAX.
4.5
1.0 ø0.5
7.8MAX.
Inductance : Max. 100mH
Operation freq. : Max. 500kHz
Variable range of L : L±5%
MG78
7.0
7.0
1.5 ø0.7
11.0MAX.
3.514.0MAX.11.0MAX.
Inductance : Max. 20mH
Operation freq. : Max. 500kHz
Variable range of L : L±10%
M-10B
7.0
7.0
ø0.7
3.516.0MAX.ø13.0MAX.
Inductance : Max. 82mH
Operation freq. : Max. 250kHz
Variable range of L : L±10%
MC-129J
TYPE DIMENSIONS（mm）
CONSTRUCTION
SPECIFICATIONS
72
Gas Discharge Tube
Gas Discharge Tube
TM - SWITCHING SPARK GAPS
SparctubeTM is a range of switching spark gaps designed specifically
for voltage controlled switching of capacitive discharge circuits,
where a high energy, low loss, and a fast rate of switching is
required. Ideally suited to applications where a capacitive discharge
is utilised with a transformer to obtain pulses of very high voltage
levels in the order of several thousand volts.
・Igniters for Architectural and Automotive Xenon discharge lamps
・Ignition of Ultra High Pressure Gas Discharge Lamps for Data
and Video Projectors
・Electronic Igniters for Gas Heating and Gas Domestic Appliances,
e.g. Cookers
・Ignition Control for Plasma Discharge Welders
■OUTLINE
■APPLICATIONS／適用
・Product Voltage Range ………………………………220 - 2000V
・Switching Time………………………………………………< 50ns
・Switching Current …………………………………………< 1000A
・Energy Per Discharge ……………………………………< 200mJ
・Service Life (operations) ………………………………> 200,000*
・Arc Voltage ………………………………………………10 - 100V
■TYPICALDATA
・Fast Switching Rate
・High Energy Low Loss Capability
・Wide Operating Temperature Range
・Excellent Service Life
・High Insulation Resistance
・Small Size
・Rugged Ceramic Metal Construction
・Non Radioactive
■FEATURES／特徴
K SPECIFICATIONS
ProductCode SwitchingVoltage SwitchingFrequency InsulationResistance Capacitance OperatingTemperature
ST 0220
ST 0350
ST 0400
ST 0600
ST 0800*
ST 1000
ST 2000
220V
350V
400V
600V
800V
1000V
2000V
<400Hz
<400Hz
<400Hz
<400Hz
<400Hz
<400Hz
<400Hz
>100 M
>100 M
>100 M
>100 M
>100 M
>100 M
>100 M
<2 pF
<2 pF
<2 pF
<2 pF
<2 pF
<2 pF
<2 pF
-40 ~ +160 ºC
-40 ~ +160 ºC
-40 ~ +160 ºC
-40 ~ +160 ºC
-40 ~ +160 ºC
-40 ~ +160 ºC
-40 ~ +160 ºC
*ST 0800 is available with a service life > 1,000,000 switchings.
SparctubeTM is a trademark of Jensen Devices AB.
73
Gas Discharge Tube
Gas Discharge Tube
TM - SWITCHING SPARK GAPS
■BASICAPPLICATIONCIRCUIT
■MECHANICALDIMENSIONS
Min 28
φ1.00
6.00±0.20 6.00±0.20
φ8.00+0.10
-0.30
φ8.00+0.10
-0.30
■ORDERINGINFORMATION
Switching Voltage
0220 = 220V
0350 = 350V
0400 = 400V
0600 = 600V
0800 = 800V
1000 = 1000V
2000 = 2000V
Tolerance
A = 15%
B = 12%
Outline Options
L = Leads
C = No Leads
Packaging
T = Tape & Reel
B = Bulk
ST XXXXXXX- STD
SparctubeTM is a trademark of Jensen Devices AB.
Outline(L) Outline(C)
74
Dimensions for embossed tape and reel packing with packed QTY
Dimensions for embossed tape and reel packing with packed QTY
4.0
B
I
H
C
A
E
D
F
2.0 ø1.5
Tape Dimensions (mm)
TYPE DIMENSION(mm)
QYT
ABCDEFH I
(PCS/Reel)
CAS14D26 24.0 8.0 5.6 15.0 11.5 1.75 3.0 0.4 2000
CBM33 12.0 8.0 4.4 5.6 5.5 1.75 3.3 0.4 500
CBM42 12.0 8.0 4.8 5.8 5.5 1.75 2.8 0.4 500
CBM63 16.0 8.0 6.1 10.3 7.5 1.75 3.3 0.4 500
CDBM7D28 16.0 4.0 5.1 8.1 7.5 1.75 3.1 0.4 2000
CDC5D23 12.0 8.0 6.0 6.0 5.65 1.50 2.6 0.4 2000
CDEP104(L.S) 24.0 16.0 10.5 10.5 11.5 1.75 5.8 0.4 500
CDEP105(L.S.H) 24.0 16.0 10.5 10.5 11.5 1.75 5.8 0.4 500
CDEP134(H) 24.0 16.0 14.1 14.1 11.5 1.75 5.2 0.4 500
CDEP149 24.0 24.0 15.1 15.1 11.5 1.75 10.3 0.4 250
CDPH4D19F 12.0 8.0 5.1 5.1 5.65 1.75 2.1 0.4 1000
CDR7D28MN 16.0 12.0 7.6 7.6 7.5 1.75 3.3 0.4 1000
CDRH103R 24.0 16.0 10.4 10.4 11.5 1.75 3.1 0.4 1000
CDRH104R 24.0 16.0 10.4 10.4 11.5 1.75 4.1 0.4 1000
CDRH105R 24.0 16.0 10.4 10.4 11.5 1.75 5.1 0.4 500
CDRH124 16.0 16.0 12.4 12.4 11.5 1.75 4.5 0.5 500
CDRH125 24.0 16.0 12.4 12.4 11.5 1.75 6.0 0.5 500
CDRH127 24.0 16.0 12.4 12.4 11.5 1.75 7.9 0.5 500
CDRH127/LD 24.0 16.0 10.0 12.4 11.5 1.75 7.9 0.5 500
CDRH2D11 12.0 8.0 3.3 3.3 5.5 1.75 1.3 0.4 1500
CDRH2D14 12.0 8.0 3.3 3.3 5.5 1.75 1.6 0.4 1000
CDRH2D18/HP 12.0 8.0 3.3 3.3 5.5 1.75 2.1 0.4 1000
CDRH2D18/LD 12.0 8.0 3.3 3.3 5.5 1.75 2.1 0.4 1000
CDRH3D16 12.0 8.0 4.3 4.3 5.5 1.75 1.9 0.4 1000
CDRH3D16/HP 12.0 8.0 4.3 4.3 5.5 1.75 1.9 0.4 1000
CDRH3D16/LD 12.0 8.0 4.3 4.3 5.5 1.75 1.9 0.4 1000
CDRH3D28 12.0 8.0 4.3 4.3 5.5 1.75 3.1 0.4 500
CDRH3D28/LD 12.0 8.0 4.3 4.3 5.5 1.75 3.1 0.4 500
CDRH4D16F/LD 12.0 8.0 4.6 4.6 5.5 1.75 2.05 0.4 1000
CDRH4D18 12.0 8.0 5.1 5.1 5.65 1.75 2.1 0.4 1000
CDRH4D18C 12.0 8.0 5.1 5.1 5.65 1.75 2.1 0.4 1000
CDRH4D18C/LD 12.0 8.0 5.1 5.1 5.65 1.75 2.1 0.4 1000
CDRH4D22 12.0 8.0 5.1 5.1 5.65 1.75 2.5 0.4 2000
CDRH4D28 12.0 8.0 5.1 5.1 5.6 1.75 3.1 0.4 2000
CDRH4D28C 12.0 8.0 5.1 5.1 5.65 1.75 3.1 0.4 2000
CDRH4D28C/LD 12.0 8.0 5.1 5.1 5.65 1.75 3.1 0.4 2000
CDRH5D16F/LD 12.0 8.0 5.5 5.5 5.5 1.75 2.05 0.4 1000
CDRH5D18 12.0 8.0 6.0 6.0 5.65 1.50 2.1 0.4 2000
CDRH5D28 12.0 8.0 6.0 6.0 5.65 1.50 3.1 0.4 2000
CDRH5D28R 12.0 8.0 6.3 6.4 5.65 1.50 3.1 0.4 2000
CDRH6D12 16.0 12.0 6.8 6.8 7.5 1.75 1.7 0.4 1000
CDRH6D26 16.0 12.0 7.1 7.1 7.5 1.75 3.1 0.4 1500
CDRH6D28 16.0 12.0 7.1 7.1 7.5 1.75 3.1 0.4 1500
CDRH6D38 16.0 12.0 7.1 7.1 7.5 1.75 4.1 0.4 1000
CDRH8D28 16.0 16.0 10.5 8.2 7.5 1.75 3.1 0.4 1000
CDRH8D38 16.0 16.0 8.2 8.2 7.5 1.75 4.1 0.4 1000
CDRH8D43 16.0 16.0 10.5 8.2 7.5 1.75 4.7 0.4 500
CEE156 24.0 24.0 16.9 15.4 11.5 1.75 7.1 0.5 300
CEE-78 24.0 16.0 9.0 9.7 11.5 1.75 6.1 0.5 500
CEE93 24.0 16.0 11.0 12.0 11.5 1.75 4.6 0.5 500
CEE94 24.0 16.0 11.0 12.0 11.5 1.75 4.6 0.5 500
CEE98 24.0 16.0 11.0 12.0 11.5 1.75 6.1 0.5 500
CEI120 24.0 16.0 14.0 15.1 11.5 1.75 6.1 0.5 500
CEI122(H) 24.0 16.0 12.9 12.9 11.5 1.75 3.6 0.4 1000
CEI-128 24.0 16.0 14.0 15.1 11.5 1.75 6.1 0.5 500
CEP123 24.0 16.0 12.9 12.9 11.5 1.75 3.6 0.4 1000
Dimensions for embossed tape and reel
packing with packed QTY
75
Dimensions for embossed tape and reel packing with packed QTY
Dimensions for embossed tape and reel packing with packed QTY
TYPE DIMENSION(mm)
QYT
形名 ABCDEFH I
(PCS/Reel)
CEP125(H,U) 24.0 16.0 13.0 13.0 11.5 1.75 5.8 0.4 500
CEP12D38 24.0 16.0 12.9 12.9 11.5 1.75 4.1 0.4 1000
CEPH199 44.0 36.0 26.1 30.6 20.2 1.75 10.1 0.4 100
CER95 24.0 16.0 11.0 12.8 11.5 1.75 6.3 0.5 500
CFB-6 16.0 12.0 7.1 8.2 7.5 1.75 7.6 0.5 500
CFB2-6 24.0 12.0 8.2 13.9 11.5 1.75 7.6 0.5 500
CLP236 32.00 16.0 13.4 23.5 14.2 1.75 7.0 0.3 500
CLP42 16.00 8.0 5.2 9.8 7.5 1.75 2.6 0.4 500
CLP82 16.0 12.0 9.2 9.8 11.5 1.75 2.6 0.4 500
CLQ102 24.0 16.0 11.9 10.9 11.5 1.75 3.1 0.4 1000
CLQ104 24.0 16.0 11.9 10.9 11.5 1.75 4.6 0.4 500
CLQ122 24.0 20.0 12.4 14.0 11.5 1.75 3.1 0.4 500
CLQ143 24.0 20.0 14.9 17.0 11.5 1.75 3.5 0.4 500
CLQ4D27 12.0 8.0 5.0 5.2 5.5 1.75 3.3 0.4 1500
CLQ52 12.0 8.0 6.0 6.4 5.5 1.75 2.6 0.4 1500
CLQ72 16.0 12.0 8.0 7.1 7.5 1.75 3.1 0.4 1500
CLQ72B 16.0 12.0 7.1 8.0 7.5 1.75 3.1 0.4 1500
CLQ7D27 16.0 12.0 8.0 9.9 7.5 1.75 3.1 0.4 1000
CLS10 24.0 16.0 11.4 11.4 11.5 1.75 5.1 0.5 500
CLS12 24.0 16.0 13.8 14.7 11.5 1.75 6.1 0.5 500
CLS4D09 12.0 8.0 5.1 5.1 5.5 1.75 1.5 0.4 1000
CLS4D11 12.0 8.0 5.1 5.1 5.5 1.75 1.5 0.4 1000
CLS4D14 12.0 8.0 5.1 5.1 5.5 1.75 1.7 0.4 1000
CLS5D11 12.0 8.0 6.2 6.2 5.65 1.5 1.5 0.4 1000
CLS5D14 12.0 8.0 6.2 6.2 5.65 1.5 1.7 0.4 1000
CMD4D06 12.0 8.0 6.0 7.0 5.5 1.75 1.5 0.4 1000
CMD4D08 12.0 8.0 6.0 7.0 5.5 1.75 1.7 0.4 1000
CMD4D11 12.0 8.0 4.5 5.9 5.5 1.75 1.5 0.4 1000
CMD4D13 12.0 8.0 4.5 5.9 5.5 1.75 1.7 0.4 1000
CMD5D11 16.0 8.0 5.9 7.5 7.5 1.75 1.5 0.4 1000
CMD5D13 16.0 8.0 5.9 7.5 7.5 1.75 1.8 0.4 1000
CMD6D11B 16.0 12.0 7.3 8.0 7.5 1.75 1.5 0.4 2000
CMG65 16.0 12.0 7.1 8.2 7.5 1.75 6.6 0.5 500
CP-4LB 12.0 8.0 5.2 6.4 5.5 1.75 3.3 0.3 500/2000
CP53 12.0 12.0 7.0 6.0 5.5 1.75 4.3 0.4 1000
CP55 12.0 12.0 7.0 6.0 5.5 1.75 6.0 0.4 750
CPFC74 16.0 8.0 5.9 9.5 7.5 1.75 4.6 0.4 1000
CPFC85 16.0 12.0 8.3 9.3 7.5 1.75 5.5 0.4 1000
CPU9D25 24.0 16.0 10.4 14.2 11.5 1.75 3.2 0.4 1000
CR105 24.0 12.0 9.5 10.4 11.5 1.75 5.9 0.4 500
CR10D37 24.0 16.0 10.4 10.4 11.5 1.75 4.2 0.4 1000
CR32 12.0 8.0 3.75 4.1 5.5 1.75 3.0 0.4 2000
CR43 12.0 8.0 4.4 4.9 5.5 1.75 3.5 0.4 1500
CR54 12.0 8.0 5.7 6.2 5.5 1.75 5.0 0.4 1500
CR75 16.0 12.0 7.4 8.2 7.5 1.75 5.5 0.4 1000
CS-4 12.0 8.0 5.1 5.1 5.65 1.50 4.6 0.4 500/1500
CS53 12.0 12.0 7.0 6.0 5.5 1.75 4.3 0.4 1000
CS55 12.0 12.0 7.0 6.0 5.5 1.75 6.0 0.4 750
CS-5LN 12.0 8.0 5.6 5.6 5.65 1.50 2.6 0.4 500/2500
CY-4 12.0 8.0 5.5 6.5 5.5 1.75 5.3 0.4 1000
CY-4T 24.0 8.0 6.4 14.75 11.5 1.75 5.2 0.4 1000
CY-4W 24.0 8.0 6.4 11.1 11.5 1.75 5.2 0.4 1000
This catalog was printed using recycled paper.
Printed in Japan 2004.9
■
HEAD OFFICE
Sumida Electric Co., Ltd.
3-3-6, Nihonbashi-Ningyocho, Chuo-ku, Tokyo, Japan, 103-8589
TEL. +81-3-3667-3302 FAX. +81-3-3667-3408
■
OVERSEAS SALES OFFICES
Sumida Trading Company Limited
14 / F., Eastern Centre, 1065 King's Road, Quarry Bay, Hong Kong
TEL. +852-2880-6688 FAX. +852-2565-9600 E-mail : sales@hk.sumida.com
Sumida Trading Company Limited (Munich Office)
Stefan-George-Ring 29, Munich, D-81929 Germany
TEL. +49-89-930-86161 FAX. +49-89-930-86422 E-mail : sales@eu.sumida.com
Taiwan Sumida Electronics Inc. (Taiwan Head Office)
171 Fu Teh St., Hsin-I, Taipei,Taiwan R.O.C.
TEL. +886-22726-2177 FAX. +886-22728-2726 E-mail : sales@tw.sumida.com
Taiwan Sumida Electronics Inc. (Tainan Office)
Room B, 5F, Shan-Hua Building, No. 291 Ta-Cheng Road, Shan-Hua, Tainan County, Taiwan 741
TEL. +886-6-5834836 FAX. +886-6-5834768 E-mail : sales@tw.sumida.com
Taiwan Sumida Electronics Inc. (Hsinchu Office)
Room2, 10F, No.537 Sec.2, Kuang Fu Road, Hsinchu, Taiwan R.O.C.
TEL. +886-3561-0554 FAX. +886-3561-0564 E-mail : sales@tw.sumida.com
Dongguan Sumida (Taiping) Electric Co., Ltd. (Shenzhen Sales Office)
Room 3905, Block A, United Plaza, 5022 Binhe Road, Futian District, Shenzhen, Guangdong, PRC, 518026
TEL. +86-755-82910228 FAX. +86-755-82910338 E-mail : shenzhen.sales@cn.sumida.com
Suzhou Sumida Electric Co., Ltd.
No.15 Dongxing Road, Loufeng Sub-district, Suzhou Industrial Park, Suzhou, Jiangsu, China PRC 215021
TEL. +86-512-6760-9280 FAX. +86-512-6760-9512 E-mail : suzhou.sales@cn.sumida.com
Sumida Europe S.A.
Chaussee de Tervuren 113A, B-1160 Brussels, Belgium
TEL. +32-2673-9565 FAX. +32-2672-0454 E-mail : sales@eu.sumida.com
Sumida Trading Pte Limited
996 Bendemeer Road. #04-05 to 06, Singapore 339944
TEL. +65-6296-3388 FAX. +65-6296-3390 E-mail : sales@sg.sumida.com
SMD Marketing (M) Sdn. Bhd. (Malaysia Head Office)
Suite 704 Level 7, Menara, Apex, Off Jalan Semenyih, Bukit Mewah, 43000 Kajang, Selangor Darul Ehsan, Malaysia
TEL. +60-3-8733-0900 FAX. +60-3-8737-7384 E-mail : sales@my.sumida.com
SMD Marketing (M) Sdn. Bhd. (Penang Office)
Unit 2-08A, Choo Plaza, 41 Lorong Abu Siti, 10400 Penang, Malaysia
TEL. +60-4-228-3505, 229-2650 FAX. +60-4-229-8512 E-mail : sales@my.sumida.com
Sumida America Inc. (U.S.A. Head Office)
1701 West Golf Road, Tower 3, Suite 400, Rolling Meadows, Illinois, IL 60008 U.S.A.
TEL. +1-847-545-6700 FAX. +1-847-545-6720 E-mail : sales@us.sumida.com
Sumida America Inc. (San Jose Office)
2841 Junction Ave., Suite 120, San Jose, CA 95134, U.S.A.
TEL. +1-408-321-9660 FAX. +1-408-321-9308 E-mail : sales@us.sumida.com
Sumida America Inc. (Detroit Office)
Suite 100, 320 East Big Beaver Road, Troy, MI 48084 U.S.A.
TEL. +1-248-528-0095 FAX. +1-248-528-0360 E-mail : sales@us.sumida.com
Jensen Devices AB
Rudbecks Väg 143, 192 51 Sollentuna, Sweden 
TEL. +46-(0)8-928895 FAX. +46-(0)8-963315 E-mail : info@jensendevices.com
Jensen Devices AB(Belgium Office)
Industrieweg Noord 1118 Box 8, 3660 Opglabbeek, Belgium
TEL. +32-89-791877 FAX. +32-89-791876 E-mail : info@jensendevices.com
AGENT
is a registered trademark of SUMIDA CORPORATION, and may not be used by you without prior written approval.