IDE 4000 2.5" Flash Disk Product Specification and User Manual March 2004 34-PS-0304-00 Rev. 1.0 DOCUMENT CONTROL INFORMATION DCO No.: Title Issued by: 2 AVP Rugged Market Name Ofer Tsur Product Specification and User Manual IDE 4000 2.5" Flash Disk Date March 21, 2004 34-PS-0304-00 Rev. 1.0 TABLE OF CONTENTS 1. Specifications........................................................................................................................ 5 1.1. Critical Item Definition .................................................................................................... 5 1.2. Characteristics................................................................................................................ 5 1.2.1. Interface Definition........................................................................................................... 5 1.2.2. IDE Transfer Modes......................................................................................................... 5 1.2.3. Performance .................................................................................................................... 5 1.2.4. Access Time .................................................................................................................... 6 1.2.5. Seek Time........................................................................................................................ 6 1.2.6. Input Voltage.................................................................................................................... 6 1.2.7. Current Consumption....................................................................................................... 6 1.2.8. Memory Capacity............................................................................................................. 7 1.2.9. Endurance........................................................................................................................ 7 1.2.10. Mean Time Between Failures (MTBF)............................................................................. 8 1.2.11. Physical Characteristics................................................................................................... 8 1.3. Environmental Conditions ............................................................................................ 11 1.3.1. Temperature .................................................................................................................. 11 1.3.2. Altitude ........................................................................................................................... 11 1.3.3. Relative Humidity ........................................................................................................... 11 1.3.4. Shock ............................................................................................................................. 11 1.3.5. Vibration......................................................................................................................... 11 1.3.6. Storage Life and Data Retention ................................................................................... 12 2. Drive Configuration............................................................................................................. 13 3. Interface Connectors .......................................................................................................... 14 4. Supported IDE Commands................................................................................................. 15 5. CE and FCC Compatibility.................................................................................................. 16 6. Label Information ................................................................................................................ 17 7. Using the IDE 4000 2.5" Flash Disk ................................................................................... 18 7.1. Unpacking the Drive ..................................................................................................... 18 7.2. Handling Instructions.................................................................................................... 18 7.3. Installing the Drive in a PC ........................................................................................... 18 7.4. Using the IDE 4000 in an MS-DOS-Based Platform .................................................... 19 7.5. Troubleshooting ........................................................................................................... 19 7.6. How to Get Help ........................................................................................................... 19 8. Warranty............................................................................................................................... 21 3 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 9. Ordering Information .......................................................................................................... 22 How to Contact Us .................................................................................................................... 23 4 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 1. SPECIFICATIONS 1.1. Critical Item Definition The dimensions of the IDE 4000 2.5" flash disk enable mounting in a standard 2.5" disk drive bay, as described in Section 1.2.11. 1.2. Characteristics 1.2.1. Interface Definition The IDE 4000 supports the commands listed in Section 4, in compliance with ATA4 standards. 1.2.2. IDE Transfer Modes The IDE 4000 supports the following transfer modes: * PIO modes 0 through 4 * DMA modes 0 through 2 1.2.3. Performance The IDE 4000 complies with the performance requirements described in Table 1. Table 1: IDE4000 2.5" Transfer Rates Operation Burst Rate (MBytes/sec) Sustained Rate (MBytes/sec) Read 16.6 3.8 Write 16.6 3.4 Performance was measured on a system with the following configuration: * Computer with ASUS P4T533-C motherboard and Intel 2.4 GHz processor * Windows XP Professional operating system * IDE transfer mode: Multiword DMA 2 * IDE 4000 disk capacity: 4GB The HDTACH v2.61 benchmark utility was used to measure IDE 4000 performance. See Figure 1 for measurement results. 5 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 Figure 1: IDE 4000 Performance Results 1.2.4. Access Time Standby to active (typical.): 0.1 msec 1.2.5. Seek Time The IDE 4000 has no seek time, as it has no moving parts. 1.2.6. Input Voltage The IDE 4000 input voltage is 3.3VDC to 5.0VDC. 1.2.7. Current Consumption The current consumption at an input voltage of +5 VDC is described in Table 2. Table 2: IDE 4000 2.5" Input Current Consumption with +5 VDC Input Voltage 6 Function/Mode Current (max) mA DC Read 23.0 Write 23.0 Idle/Sleep 5.0 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 The current consumption at an input voltage of +3.3 VDC is described in Table 3. Table 3: IDE 4000 2.5" Input Current Consumption with +3.3VDC Input Voltage 1.2.8. Function/Mode Current (max) mA DC Read 16.0 Write 16.0 Idle/Sleep <1 Memory Capacity Table 4 describes the different densities of the IDE 4000 (unformatted, in MBytes). Table 4: IDE 4000 2.5" Flash Disk Capacities Disk Capacity (MB) 128 256 384 512 640 768 1024 1280 1536 1792 2048 2560 3072 3584 4096 1.2.9. Endurance The IDE 4000 sustains more than 100,000 write/erase cycles and an unlimited number of read cycles. Performance is enhanced by the following features: * Wear-Leveling Algorithm: This algorithm guarantees the use of all flash components at the same level of the write/erase cycle. * EDC/ECC (Error Detection Code/Error Correction): The enhanced Reed-Solomon EDC/ECC extends disk endurance by detecting and then fixing flash blocks. 7 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 1.2.10. Mean Time Between Failures (MTBF) Table 5 summarizes the MTBF prediction results for various IDE 4000 configurations. The analysis was performed using a RAM CommanderTM failure rate prediction. Table 5: IDE 4000 2.5" MTBF Product Condition MTBF (Hours) Failure Rate per Million Hours IDE 4000 2.5" 1GB Telcordia SR-332, GB, 25C 2,893,495 0.3456 IDE 4000 2.5" 2GB Telcordia SR-332, GB, 25C 2,188,066 0.4570 IDE 4000 2.5" 3GB Telcordia SR-332, GB, 25C 1,759,180 0.5684 IDE 4000 2.5" 4GB Telcordia SR-332, GB, 25C 1,470,874 0.6799 A detailed MTBF report can be furnished upon request. 1.2.11. 1.2.11.1 Physical Characteristics Weight The weight of the IDE 4000 complies with the values defined in Table 6. Table 6: IDE 4000 2.5" Weight Memory Capacity Weight (g) 4096MB 90 1.2.11.2 Dimensions Table 7 describes the nominal dimensions of the IDE 4000. Refer to Figure 2 for detailed mounting configuration dimensions. Table 7: 2.5" Nominal Dimensions Dimensions 8 IDE 4000 2.5" Height 0.291 in 7.40 mm Width 2.750 in 69.85 mm Depth 3.945 in 100.20 mm Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 Recommended Tightening Tourqe is 6.0 in-lb (0.675 N-m) Recommended Tightening Tourqe is 6.0 in-lb (0.675 N-m) Notes: 1. All dimensions are in mm [Inch.] 2. General tolerance 0.25mm [0.01"] Figure 2: IDE 4000 2.5" Assembly 1.2.11.3 Connector Interface The pinout for the IDE 4000 interface connector is detailed in Table 8 and in Figure 3. Table 8: J1 Pin Assignment 9 Pin Number Signal Name Pin Number Signal Name 1 RESET- 2 GND 3 HD7 4 HD8 5 HD6 6 HD9 7 HD5 8 HD10 9 HD4 10 HD11 11 HD3 12 HD12 13 HD2 14 HD13 15 HD1 16 HD14 17 HD0 18 HD15 19 GND 20 KEY 21 N.C. 22 GND Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 Pin Number Signal Name Pin Number Signal Name 23 HIOW- 24 GND 25 HIOR- 26 GND 27 IORDY 28 CSEL 29 N.C. 30 GND 31 INTRQ 32 IOCS16- 33 HA1 34 PDIAG- 35 HA0 36 HA2 37 CS0- 38 CS1- 39 DASP- 40 GND 41 VCC 42 VCC 43 GND 44 RSVD Table 9: J2 Pin Assignment Pin Number Signal Name Pin Number Signal Name 47 Slave 48 Slave 49 Cable Select 50 Cable Select Figure 3: IDE 4000 2.5" Pin Configuration 10 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 1.3. Environmental Conditions The IDE 4000 meets the performance requirements specified below, after exposure to non-operating environmental conditions, or during and after exposure to operating environmental conditions. 1.3.1. Temperature 1.3.1.1 Operating The IDE 4000 operates without degradation at a pressure of 1 atm over the following ambient temperature range: * Commercial temperature version: 0C to +70C * Extended temperature version: -40C to +85C The maximum temperature change rate shall not exceed 5C per minute. 1.3.1.2 Non-Operating The IDE 4000 commercial temperature version meets the performance requirements specified in this document after having been tested via exposure to a nominal ambient temperature of -55C for not less than 3 days, and +95C for a period of not less than 6 hours. The maximum temperature change rate shall not exceed 5C per minute. 1.3.1.3 Airflow Requirements General airflow guideline: 3-5 cu.feet/min. 1.3.2. Altitude The IDE 4000 sustains full operation at altitudes ranging from sea level to 80,000 feet above sea level. It is also capable of full operation during air transportation via non-pressurized flights at altitudes greater than 80,000 feet above sea level. 1.3.3. Relative Humidity The IDE 4000 withstands conditions of 8% to 95% non-condensing relative humidity (operation and non-operation). 1.3.4. Shock The IDE 4000 sustains full operation after being subjected to 1000 G shock testing in the vertical axis. 1.3.5. Vibration The IDE 4000 remains operational without degradation while being subjected to a 15 G vibration condition. 11 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 1.3.6. Storage Life and Data Retention The IDE 4000 can be placed in non-operational storage in shipping containers or crates for a period of up to 3 years without its capabilities being permanently affected. The IDE 4000 has a data retention span of over 10 years. 12 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 2. DRIVE CONFIGURATION The IDE 4000 must be configured as shown in Figure 4 before being mounted in the system's drive bay. Figure 4: IDE 4000 2.5" Disk Address Setting by Jumper 13 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 3. INTERFACE CONNECTORS The IDE 4000 has a 2-mm pitch interface connector located on the rear panel. It accesses the DC power source and the IDE bus through a non-shielded 44-pin flat cable. Figure 5 provides an example of a connector that can be used to interface with this connector, but any compatible connectors may be used. Figure 5: IDE 4000 2.5" Interface Connector In order to prevent damage to the disk by connecting the cable with a 180 rotation, ensure that the special plastic key at pin 20 mating connector is blocked, as shown in Figure 5. This key should be ordered from the connector manufacturer. 3.1.1.1 IDE Cable The cable length should not exceed 18 inches. 14 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 4. SUPPORTED IDE COMMANDS The IDE 4000 supports the commands listed in Table 10. Table 10: IDE Commands Command Name CHECK POWER MODE 98h E5h EXECUTE DEVICE DIAGNOSTIC 90h FORMAT TRACK 50h IDENTIFY DEVICE Ech IDLE 97h E3h IDLE IMMEDIATE 95h E1h INITIALIZE DEVICE PARAMETERS 91h READ BUFFER E4h READ MULTIPLE C4h READ SECTOR(S) (with retry) 20h READ SECTOR(S) (without retry) 21h READ LONG 22h 23h READ VERIFY SECTOR(S) (with retry) 40h READ VERIFY SECTOR(S) (without retry) 41h RECALIBRATE 10h SEEK 70h SET FEATURES Efh SET MULTIPLE MODE C6h SLEEP 99h E6h STANDBY 96h E2h STANDBY IMMEDIATE 94h E0h WRITE BUFFER E8h WRITE MULTIPLE C5h WRITE SECTOR(S) (with retry) 30h WRITE SECTOR(S) (without retry) 31h WRITE LONG 15 Command Code 32h 33h Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 5. CE AND FCC COMPATIBILITY The IDE 4000 complies with the following CE requirements and FCC standards: * FCC Part 15 Class B * EN 55022 Class B, CISPR 22 Class B (MIC) * V-3/2001.04 Class B (Japan), AS/NZS 3548 Class B (Australia/NZ) * BSMI CNS 13438 Class B (Taiwan) * CAN/CSA-CISPR 22-96 Class B (Canada) CFR 47 FCC Class B * EN 55024, EN 61000 (EMC) 16 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 6. LABEL INFORMATION The outside label contains the following informationError! Reference source not found.: 5 6 7 8 1 2 3 4 9 Figure 6: Outside Label 1. CE and FCC logos 2. Product name 3. Unformatted capacity value 4. M-Systems logo 5. Ordering information 6. Serial number, including date code 7. Part number 8. Declaration 9. ESD warning logo and statement 17 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 7. USING THE IDE 4000 2.5" FLASH DISK The IDE 4000 is shipped with the following components: * Warranty certificate indicating M-Systems' 36-month warranty * Four screws and one jumper, in kit no. 48-PK-001-00 If any of these items is missing, please contact your dealer. 7.1. Unpacking the Drive Before unpacking or handling a drive, take all proper electrostatic discharge (ESD) precautions, including personnel and equipment grounding. Before you begin installing the IDE 4000 in your system, perform a visual inspection and follow the recommendations below: * If the shipping container appears to be damaged or water-stained, notify your dealer. * Remove the disk from its shipping enclosure and inspect it for any damage that may have occurred during shipment. If any damage is observed, notify your dealer. * Record the disk serial number and shipment date. * Retain the original shipping enclosure and all packing material for re-shipment. 7.2. Handling Instructions You can prolong the life of your IDE 4000, increase its reliability, and prevent unnecessary damage by following the instructions listed below. Failure to follow any of these instructions may void your warranty. * Always take all proper electrostatic discharge (ESD) precautions, including personnel and equipment grounding. * Always operate the flash disk within the environmental specifications. * Always use a grounded wrist strap when handling the flash disk. * Never switch DC power to the drive by plugging an electrically live source cable into the drive's power connector. * Pay attention to the cable polarity whenever connecting the drive to the cable. 7.3. Installing the Drive in a PC To install the IDE 4000: 1. Power off the PC and remove the cover. 2. Configure the IDE 4000 jumper settings according to the information provided in Section 2. 18 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 3. Connect a 44-pin ribbon cable between the IDE 4000 and the adapter. Make sure to orient the cable so that pin 1 of the IDE 4000 is connected to pin 1 of the host adapter. 4. Mount the IDE 4000 in a free drive bay. 5. Close the PC cover and power on the PC. The host BIOS sign-on message appears and displays a key sequence to enter the BIOS setup. Set up the BIOS to recognize the IDE 4000. 7.4. Using the IDE 4000 in an MS-DOS-Based Platform After installing the IDE 4000, it must be installed as a disk drive under DOS. Run the DOS commands listed below and follow the instructions displayed for each command. For more information regarding DOS commands, refer to your DOS manual. * Run the DOS FDISK program to partition the IDE 4000. * Run the DOS FORMAT command to high-level format the IDE 4000. * If you want the IDE 4000 to be a bootable drive, run the DOS SYS command and change the partition to active. 7.5. Troubleshooting The problems that arise in most installations can be summarized below: Cables: * Homemade, short, flat ribbon cables with bad contacts or cheap cables * Mixing round cables with flat cables. Cable Length: * The cable exceeds the length specified in the standard * Cables are too long to support the transfer rate. Device Address Conflict: * A new device was added with an IDE setting identical to an existing device on the bus. * Connection problems. * A cable was connecting with reverse polarity. 7.6. How to Get Help If you need technical assistance with the installation and configuration of your IDE 4000, please contact your customer support representative and have the following information available: * Product and serial number of your IDE 4000 * Description of your computer hardware (manufacturer, model, attached devices, etc.) 19 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 * Description of your IDE host adapter and associated drivers * Description of your software (operating system, version, application software, etc.) * A complete description of the problem * The exact wording of any error messages Before contacting M-Systems directly, first contact your dealer (if you did not purchase you IDE 4000 directly from M-Systems). If your dealer cannot provide the help you need, you can obtain technical support directly from M-Systems at one of the numbers in the list of offices on the last page of this manual, or from the M-Systems website www.m-systems.com. 20 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 8. WARRANTY The warranty period of the IDE 4000 is 36 months (3 years). For details, please refer to the warranty certificate, which is included with the IDE 4000. 21 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 9. ORDERING INFORMATION Ordering information for the IDE 4000: IDE-4K-25-CCCC-T Where: CCCC: Capacity (MB) 128, 256, 384, 512, 640, 768, 1024, 1280, 1536, 1792, 2048, 2560, 3072, 3584, 4096 T: Temperature Range Blank Commercial: 0C to +70C X Extended: -40C to +85C 22 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0 HOW TO CONTACT US USA China M-Systems Inc. 8371 Central Ave, Suite A Newark CA 94560 Phone: +1-510-494-2090 Fax: +1-510-494-5545 M-Systems China Ltd. Room 121-122 Bldg. 2, International Commerce & Exhibition Ctr. Hong Hua Rd. Futian Free Trade Zone Shenzhen, China Phone: +86-755-8348-5218 Fax: +86-755-8348-5418 Japan Europe M-Systems Japan Inc. Asahi Seimei Gotanda Bldg., 3F 5-25-16 Higashi-Gotanda Shinagawa-ku Tokyo, 141-0022 Phone: +81-3-5423-8101 Fax: +81-3-5423-8102 M-Systems Ltd. 7 Atir Yeda St. Kfar Saba 44425, Israel Tel: +972-9-764-5000 Fax: +972-3-548-8666 Taiwan Internet M-Systems Asia Ltd. Room B, 13 F, No. 133 Sec. 3 Min Sheng East Road Taipei, Taiwan R.O.C. Tel: +886-2-8770-6226 Fax: +886-2-8770-6295 www.m-systems.com General Information info@m-sys.com Sales and Technical Information techsupport@m-sys.com This document is for information use only and is subject to change without prior notice. M-Systems Flash Disk Pioneers Ltd. assumes no responsibility for any errors that may appear in this document. No part of this document may be reproduced, transmitted, transcribed, stored in a retrievable manner or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without prior written consent of M-Systems. M-Systems products are not warranted to operate without failure. Accordingly, in any use of the Product in life support systems or other applications where failure could cause injury or loss of life, the Product should only be incorporated in systems designed with appropriate and sufficient redundancy or backup features. Contact your local M-Systems sales office or distributor, or visit our website at www.m-systems.com to obtain the latest specifications before placing your order. (c) 2004 M-Systems Flash Disk Pioneers Ltd. All rights reserved. M-Systems, DiskOnChip, DiskOnChip Millennium, DiskOnKey, DiskOnKey MyKey, FFD, Fly-By, iDiskOnChip, iDOC, mDiskOnChip, mDOC, Mobile DiskOnChip, Smart DiskOnKey, SuperMAP, TrueFFS, uDiskOnChip and uDOC are trademarks or registered trademarks of M-Systems Flash Disk Pioneers, Ltd. Other product names or service marks mentioned herein may be trademarks or registered trademarks of their respective owners and are hereby acknowledged. All specifications are subject to change without prior notice. 23 Product Specification and User Manual IDE 4000 2.5" Flash Disk 34-PS-0304-00 Rev. 1.0