MS151J-HRMJ - Hirose Electric

125

Interface RF Connector with Switch, built-in interlock, DC to 3GHz

MS-151NB Series

■Features

1. Confirmation of complete connection

Built-in interlock feature confirms fully mated

condition

with a "click" sensation.

2. Non-directional connection

The connector can be mated in any position on a

360° axis and can rotate within the same when in

use, allowing routing of the connected cable in

any direction.

3. High durability

Guaranteed 5000 insertion/removal cycles.

4. Space-saving

The external dimensions of the board-mounted

receptacle (5.0 mm high, 6.5 mm wide, 7.0 mm

deep) makes it ideal for use in small devices.

5.

Board placement with automatic equipment

Packaged on tape-and-reel. Also available with a

vacuum pick-up cap over each switch.

6. RoHS compliant

All components and materials comply with the

requirements of the EU Directive 2002/95/EC.

■Applications

GPS terminals, wireless LAN modules, notebook

computers, PDA, and other high frequency

equipment.

(Page 7 lists applications and antenna circuit

switching examples.)

■Overview

Designed for end user applications requiring re-

direction of transmission from internal built-in

antenna to the external antenna. Small size,

lightweight and high reliability makes it ideal for

use in 2.4 GHz band wireless LAN applications.

MS151P-HRMJ

●

SMA Conversion Adapter

For Receptacle: MS-151NB

MS151J-HRMJ

●

SMA Conversion Adapter

For Plug: MS-151-C(LP)

MS-151

MS-151-C(LP)

Plug can be rotated after full insertion.

●Receptacle

●Plug

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

04/2009

■Product Specifications

100 mA

100 V DC

100 V AC / 1 minute

Frequency:

10 to 500 Hz, single amplitude of 0.75 mm, acceleration

of 98 m/s2 for 2 hours in each of the 3 directions

Acceleration of 490 m/s2, 11 ms duration, sine half-wave

waveform, 3 cycles in each of the 3 axis

Temperature: -55ç

/

+15çto +35ç

/

+85ç

/

+15çto +35ç

Time: 30

/

5 max.

/

30

/

5 max.(Minutes)

100 cycles

96 hours at temperature of 40çand humidity of 90%

5% salt water solution, 48 hours (at 35ç)

With corresponding connector

5000 cycles

50 m ohms max.

1000 M ohms min.

No flashover or insulation breakdown

Contact resistance: 100 m ohms max.

No corrosions

Insertion force: 1~10N

Withdrawal force: 3~15N

Contact resistance: 100 m ohms max.

1. Contact resistance

2.

Insulation resistance

3.

Withstanding voltage

4. Vibration

5. Shock

6. Temperature cycle

7. Humidity

7. (Steady state)

8. Salt spray

9.

Insertion/Withdrawal

forces

10. Durability

10.

(insertion/ withdrawal)

Item Specification Conditions

Frequency range

Operating temperature range

Power rating

V.S.W.R.

Insertion loss

Isolation loss

DC to 3GHz

–40çto +85ç

4W

1DC to 1 GHz

1 GHz to 2 GHz

2 GHz to 3 GHz

1DC to 1 GHz

1 GHz to 2 GHz

2 GHz to 3 GHz

1DC to 1 GHz

1 GHz to 2 GHz

2 GHz to 3 GHz

1.2dBmax.

1.4dBmax.

1.7dBmax.

0.2dB max.

0.4dB max.

0.6dB max.

--------------

---------------

0.3dB max.

0.5dB max.

1.0dB max.

20dB min.

18dB min.

12dB min.

N.C N.O

■Materials

Receptacle MS-151

Insulator Polyamide (UL94V0) ---------------

Lock mating section Stainless steel Nickel plating (Termination area: tin-lead plated)

Outer conductor shell Phosphor bronze Nickel plating (Termination area: tin-lead plated)

Contact A Phosphor bronze Gold plating

Contact C Beryllium copper Gold plating

Part Material Finish

Plug MS-151-C(LP)

Cover A PC ---------------

Cover B PC ---------------

Ring Stainless steel Nickel plating

Outer conductor shell Phosphor bronze Nickel plating

Inner contact Phosphor bronze Gold plating

Insulator Polyamide (UL 94-HB) ---------------

Ferrule Stainless steel ---------------

Crimp metal fitting Brass Nickel plating

Bushing Polyester ---------------

Part Material Finish

No electrical discontinuity of 10 µs or more

Contact resistance: 100 m ohms max.

Insulation resistance: 10 M ohms min.

126

MS-151NB Series●Interface RF Connector with Switch, built-in interlock, DC to 3GHz

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

04/2009

127

MS-151NB Series●Interface RF Connector with Switch, built-in interlock, DC to 3GHz

BTypical data

1.0

1.1

1.2

1.3

1.4

1.5

1.6

1.7

DC 3.0 [GHz]

[dB]

0

0.2

0.4

0.6

0.8

1.0

2.01.0

INSERTION LOSS

V.S.W.R.

: V.S.W.R. SPEC

: INSERTION LOSS SPEC

: ISOLATION SPEC

INSERTION LOSS [dB]

V.S.W.R.

●NORMALLY CLOSED(N.O) ~ (Not mated with the plug)

1.0

1.1

1.2

1.3

1.4

1.5

1.6

1.7

DC 3.0 [GHz]

[dB]

0

0.2

0.4

0.6

0.8

1.0

0

10

20

30

40

2.01.0

INSERTION LOSS

ISOLATION

V.S.W.R.

INSERTION LOSS [dB]ISOLATION [dB]

V.S.W.R.

●OPEN(N.O) ~ (Mated with the plug)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

04/2009

■Receptacle

BPCB mounting pattern

BCircuit diagram

2-0.25

2-0.3

0.5

3-□0.5

1.8

2-1

2-φ0.9

2-0.8

2-0.65

2-0.3

3.6

G A C

G

B

5.2

6.5

（2.5）

7

3 2.5

2

1.2

ＭＳ−１５１



5

G

B

Mated with the plug(N.O)Not mated with the plug(N.C)

Plug MS-151NB

G

A

C

G

B

G

A

C

G

No conductive traces

4.9

3.2

3

1.8

2

3.6

5.2

4.3

Connector front edge

7.1

2-0.55

2-0.6

1.1

0.2

1.3

2-Ø1

2-Ø2(Land)

2-Ø1.2(Throug hole)

0.6

2.3

1.65

1.35

2.5

Part Number

MS-151NB

MS-151NB(01)

HRS No.

358-0215-9-01

Packaging RoHS

1,000 pieces per reel

100 pieces YES

128

MS-151NB Series●Interface RF Connector with Switch, built-in interlock, DC to 3GHz

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

04/2009

129

MS-151NB Series●Interface RF Connector with Switch, built-in interlock, DC to 3GHz

BPackaging Specifications

BRecommended Temperature Profile

MS-151

Unreeling direction

12

7.5

Ø80

1.75

16

7

Ø380

4

2

22.4 max.

16.4

Ø1.5

Ø21

Ø13

0

100

180

200

Temperature(ç)

60 to 120sec. 50 to 80sec.

260

220

Peak Temperature 260ç max.

5sec. max.

Embossed tape reel packaging (1,000 pieces/reel)

Maximum temperature

Peak temperature

Peak temperature duration

200ç min.

150ç to 160ç

: 260ç

: 240ç to 255ç

: 5 sec. Max.

: 50 to 80 sec.

: 60 to 120sec.

Using Lead-free solder paste

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

04/2009

130

MS-151NB Series●Interface RF Connector with Switch, built-in interlock, DC to 3GHz

■Plug

●For Receptacle: MS-151

(24.1)

(8)

(12.5)

(5.5)

(Ø4.15)

Part Number

MS-151-C(LP)

Termination fixture: MS-151/CF-MD, MS-151/SO-MD, MS-151/BE-MP and MS-151/CK-MP

Please contact your Hirose Electric representative for information.

HRS No.

358-0160-9

Packaging Applicable cable RoHS

1 1.5DS-QEHV(TA) YES

■SMA Conversion adaptors

φ7.3

6.3

φ4.15

（6.29）6 5.5

17.79

1/4-36UNS-2A

Part Number

MS151P-HRMJ

HRS No.

355-0089-7

Packaging RoHS

1 YES

●For Plug: MS-151-C(LP)

φ7.3

φ2.9

（6.29）6 3.5

15.79

6.3

1/4-36UNS-2A

Part Number

MS151J-HRMJ

HRS No.

355-0088-4

Packaging RoHS

1 YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

04/2009