857124 184.32 MHz SAW Filter Applications * * * General purpose wireless WCDMA/LTE applications 3G, 4G, Multistandard Product Features Functional Block Diagram Top view * * * * * * * * * Usable bandwidth 25 MHz Low loss High attenuation Low EVM Balanced operation Ceramic Surface Mount Package (SMP) Small Size: 7.01 x 5.51 x 1.63 mm Hermetically Sealed Pb RoHS compliant, Pb-free Gnd Gnd Gnd 9 8 7 Input + 10 6 Output - Gnd 11 5 Gnd Input - 12 4 Output + 1 3 2 Gnd Gnd Gnd General Description Pin Configuration The 857124 is a high performance IF filter specifically designed for the demanding requirements of 4G wireless infrastructure systems. Designed for versatile drive configurations, this filter is optimized for a balanced input and output, leading to elimination of baluns. Low insertion loss, excellent attenuation and flat in-band performance leading to low EVM contribution, makes this filter an effective choice for our customers LTE and Multistandard platforms. Pin # Bal/Bal Description 10 12 4 6 1,2,3,5 7,8,9,11 Input + Input Output + Output Ground Ground Ordering Information Part No. Description 857124 857124-EVB packaged part evaluation board Standard T/R size = 3000 units/reel. Data Sheet: Rev A 9/20/12 (c) 2012 TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network 857124 184.32 MHz SAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) -40 to +85 C Parameter (3) Center Frequency Insertion Loss Amplitude Variation (5) Group Delay Variation (5) Absolute Group Delay EVM IIP3 Temperature Drift (6) Input VSWR Output VSWR Relative Attenuation (7) Conditions at 184.32 MHz 171.82 - 196.82 MHz (P1dB) Over any 5 MHz span within P1dB 171.82 - 196.82 MHz at 184.32 MHz Over any 3.84 MHz span within P1dB Tones 5 MHz separated, power >5 dBm per tone 171.82 - 196.82 MHz 171.82 - 196.82 MHz 10.0 - 75.0 MHz 75.0 - 151.82 MHz 151.82 - 161.82 MHz 161.82 - 166.82 MHz 202.82 - 206.82 MHz 206.82 - 216.82 MHz 216.82 - 290.0 MHz 290.0 - 330.0 MHz 330.0 - 410.0 MHz 410.0 - 2000 MHz Source Impedance (balanced) (8) Load Impedance (balanced) (8) Min Typical (4) Max Units - 184.32 7.8 0.5 0.3 25 0.50 1.3 9.0 1.0 0.8 40 0.55 2.5 MHz dB dB dB ns p-p s % 45 54 - dBm 55 40 30 10 10 30 40 50 30 55 - 0.23 1.6 2.0 80 51 45 25 20 41 48 59 37 72 200 150 0.3 2.5 2.5 - dB dB dB dB dB dB dB dB dB dB dB Notes: 1. All specifications are based on the TriQuint schematic shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Variation is defined as the total peak to peak variation over the defined frequency range 6. Temperature Drift specification is defined on Page 3 and is guaranteed by design and won't be measured in production 7. Relative to insertion loss at center frequency 8. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature Storage Temperature Input Power -40 to +85 oC -40 to +85 oC +22 dBm (max) CW for 24 hours at +55C Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev A 9/20/12 (c) 2012 TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network 857124 184.32 MHz SAW Filter Temperature Drift Specification Temperature Drift Equations: Temp Drift = Temp Drift = Temperature Drift Terms Defined: max(T - T ) - min(T - T ) 2 T - Transmission power in dB measured at +25 degrees C. T - Transmission power in dB measured at +85 degrees C. T - Transmission power in dB measured at -40 degrees C. Temperature Drift - Greater of Temp Drift vs Temp Drift max(T - T ) - min(T - T ) 2 Reference Design - 200 Bal Input, 150 Bal Output Schematic 120pF 56nH 4 12 8pF 200 Balanced Input 33nH 47nH 200 56nH 10 1,2,3,5 7,8,9,11 150 Balanced Output 150 6 120pF Notes: 1. Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration 1.34 .28 .99 1.34 .28 960686 L1 C1 L3 TriQuint 857124 JJJYHH C2 5.71 L4 C3 L2 .99 7.21 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number L1 L2 L3 L4 C1 C2 C3 SMA PCB 56nH 56nH 47nH 33nH 8pF 120pF 120pF N/A N/A Coil Wire-wound, 0603, 5% Coil Wire-wound, 0603, 5% Coil Wire-wound, 0603, 5% Coil Wire-wound, 0603, 5% Chip Ceramic, 0603, 5% Chip Ceramic, 0603, 5% Chip Ceramic, 0603, 5% SMA connector 3-layer Coilcraft Coilcraft Coilcraft Coilcraft Panasonic Panasonic Panasonic Johnson Components multiple 0603CS-56NXJBC 0603CS-56NXJBC 0603CS-47NXJBC 0603CS-33NXJBC ECU-V1H080DCV ECU-V1H121KCV ECU-V1H121KCV 142-0701-801 960686 Data Sheet: Rev A 9/20/12 (c) 2012 TriQuint Semiconductor, Inc. - 3 of 6 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network 857124 184.32 MHz SAW Filter Typical Performance (at room temperature) Data Sheet: Rev A 9/20/12 (c) 2012 TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network 857124 184.32 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking Package Style: SMP-28B Dimensions: 7.01 x 5.51 x 1.63 mm TriQuint 857124 JJJYHHM ID dot Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating Date code All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 0.76 1.63 NOM. 1.78 MAX. The date code consists of: day of the year (Julian, 3 digits), Y = last digit of the year (1 digit), HH = hour of the day (Military) and M=Manufacturing Site Code 7.01 1.27 1.70 1.27 5.51 0.79 1.14 Tape and Reel Information Standard T/R size = 3000 units/reel. All dimensions are in millimeters 2.7 16.8 O330 Pad 1 ID dot 4.0 0.3 2.0 O1.5 A 1.75 7.5 O102 7.3 Direction of travel O20.2 O13.0 16.0 2.0 2.2 5.8 8.0 O1.5 A Section A-A Data Sheet: Rev A 9/20/12 (c) 2012 TriQuint Semiconductor, Inc. - 5 of 6 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network 857124 184.32 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 1B Value: Passes 800 V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: * Halogen Free (Chlorine, Bromine) * Antimony Free * TBBP-A (C15H12Br402) Free * PFOS Free * SVHC Free ESD Rating: B Value: Passes 300 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev A 9/20/12 (c) 2012 TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice Connecting the Digital World to the Global Network