TCA4027050BK005000-FREQ - Pletronics, Inc.

to specifications per the terms of the Pletronics standard warranty. Production

processsing does not necesarily include testing of all parameters.

TCA4 Series

TCXO / TCVCXO

November 2010

• Pletronics’ TCA4 Series is a temperature

compensated crystal oscillator with an optional

voltage control function and a clipped sinewave

output.

• The package is designed for high density

surface mount designs.

• Tape and Reel packaging is available.

• 10 to 40 MHz

• 5 x 7 mm LCC Ceramic Package

• Optional Voltage Control Function (TCVCXO)

•

Pletronics Inc. certifies this device is in accordance with the

RoHS (2002/95/EC) and WEEE (2002/96/EC) directives.

Pletronics Inc. guarantees the device does not contain the following:

Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s

Weight of the Device: 0.17 grams

Moisture Sensitivity Level: 1 As defined in J-STD-020D.1

Second Level Interconnect code: e4

Absolute Maximum Ratings:

Parameter Unit

VCC Supply Voltage -0.5V to +6.5V

Vi Input Voltage -0.5V to VCC + 0.5V

Vo Output Voltage -0.5V to VCC + 0.5V

Reliability: Environmental Compliance

Parameter Condition

Mechanical Shock MIL-STD-883 Method 2002, Condition A

Vibration MIL-STD-883 Method 2007, Condition A

Solderability MIL-STD-883 Method 2003

Thermal Shock MIL-STD-883 Method 1011, Condition A

Thermal Characteristics

The maximum die or junction temperature is 155oC

The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane

and construction of the PCB.

TCA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 2

Part Number:

TCA4 027 050 G H 015 008 -12.75M -XX

Internal code or blank

Nominal Frequency in MHz

Pullability in ppm (Vcontrol)

000 = TCXO only

008 = +_ 8 ppm minimum

012 = +_ 12 ppm minimum

Stability in ppm

005 = +_ 0.5 ppm

010 = +_ 1 ppm

015 = +_ 1.5 ppm

025 = +_ 2.5 ppm

Highest Specified Operating Temperature

A = +40oCE = +60oCJ = +80oC

B = +45oCF = +65oCK = +85oC

C = +50oCG = +70oC

D = +55oCH = +75oC

Lowest Specified Operating Temperatu re

A = +10oCE = -10oCJ = -30oC

B = +5oCF = -15oCK = -35oC

C = +0oCG = -20oCL = -40oC

D = -5oCH = -25oC

Highest Supply Voltage*

050 = 5.0 volts

036 =3.6 volts

Lowest Supply Voltage *

029 = 2.9 volts

027 = 2.7 volts

Series (Part Type, Logic & Package)

* Supply Voltage: Select range between 2.7V and 5.0V with Highest / Lowest < 1.20

For Example: the part number for 3.3V nominal would be TCA4030036.........

Part Marking:

Tcywwa Where: ywwa = Date code

fff.fff M fff.fff = frequency in MHz

PLHXXX P = Pletronics

LH = Lowest Temp, Highest Temp

XXX = Stability

Due to part size limitations, marking cannot identify complete specifications.

A Certificate of Conformance will accompany these parts.

TCA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 3

Electrical Specification for specified Vcc over the specified temperature range

Item Min Max Unit Condition

Frequency Range 10 40 MHz

Frequency Accuracy 1 -2.5 +2.5 ppm Vcontrol 1.50 volts if used

Frequency Stability / Supply -0.2 +0.2 ppm Load: 10K ohm // 10 pF & Vcc +_ 5%

Output Waveform Clipped Sinewave

Output Level 0.8 - V p-p Load: 10K ohm +_ 10% // 10 pF +_ 10%

Phase Noise - -135 dBc/Hz Typical at 1 kHz

V Supply Range 1 VCC 2.7 5.0 Volts

Supply Current ICC -4.0mA

Aging -1.0 +1.0 ppm Per year @ 25oC

Vcontrol Range 0.5 2.50 Volts 1.50 volts nominal

Frequency Pullability 1-12 +12 ppm

Operating Temperature Range 1-40 +85 oC

Storage Temperature Range -55 +95 oC

1 Specified by part number

ESD Rating

Model Minimum Voltage Conditions

Human Body Model 1500 MIL-STD-883 Method 3115

Charged Device Model 1000 JESD 22-C101

Package Labeling

Label is 1" x 2.6" (25.4mm x 66.7mm) Label is 1" x 2.6" (25.4mm x 66.7mm)

Font is Courier New Font is Arial

Bar code is 39-Full ASCII

TCA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 4

Mechanical: Pad dimensions are typical. Actual dimensions may vary.

Inches mm

A 0.276 +_0.006 7.00 +_0.15

B 0.197 +_0.006 5.00 +_0.15

C 0.074 +_0.006 1.88 +_0.15

D10.038 0.96

E10.200 5.08

F10.004 0.10

G10.039 1.00

H10.047 1.20

Not to Scale

1 Typical dimensions

I10.024 0.60

J10.004 0.10R

K10.008 0.020R

Contacts :

Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches 1.27 to 8.89 µm

IMPORTATNT: The additional package connections are not to be connected and shall remain open

circuits.

These are pads for programming the performance of the VCTCXO.

The location of these pads will vary.

Pad Function Note

1 Vcontrol Input If this function is not specified, recommend connecting this pad to ground.

2 Ground (GND)

3 Output

4 Supply Voltage (VCC) Recommend connecting appropriate power supply bypass capacitors as close

as possible.

Layout and application information

For Optimum Jitter Performance, Pletronics recommends:

• a ground plane under the device

• no large transient signals (both current and voltage) should be routed under the device

• do not layout near a large magnetic field such as a high frequency switching power supply

• do not place near piezoelectric buzzers or mechanical fans.

TCA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 5

260°C M aximum

10 Seconds M aximum

215°C±10°C

Approximately 50 Seconds

Allowed rate of temperature change

Maximum 4°C per second

120 to 160 Seconds

100

150

200

250

Temperature (°C)

175°C±10°C

Reflow Cycle (typical for lead free processing)

The part may be reflowed 2 times without degradation.

Tape and Reel: available for quantities of 250 to 1000 per reel

Constant Dimensions Table 1

Tape

Size D0 D1

Min E1 P0 P2 S1

Min T

Max

8mm

1.5

+0.1

-0.0

1.0

1.75

+_0.1

4.0

+_0.1

2.0

+_0.05

0.6 0.6 0.1

12mm 1.5

16mm 1.5 2.0

+_0.1

24mm 1.5

Variable Dimensions Table 2

Tape

Size B1

Max E2 Min F P1 T2

Max W

Max Ao, Bo &

16 mm 12.1 14.25 7.5 +_0.1 8.0 +_0.1 8.0 16.3 Note 1

Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale

REEL DIMENSIONS

A inches 7.0 10.0 13.0

mm 177.8 254.0 330.2

B inches 2.50 4.00 3.75

mm 63.5 101.6 95.3 Tape

Width

C mm 13.0 +0.5 / -0.2

D mm 16.4

+2.0

-0.0

16.4

+2.0

-0.0

16.4

+2.0

-0.0

16.0

mm --- --- 24.4

+2.0

-0.0

24.0

mm --- --- 32.4

+2.0

-0.0

32.0

Reel dimensions may vary

from the above

TCA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 6

IMPORTANT NOTICE

Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and

other changes to this product at anytime. PLE reserves the right to discontinue any product or service

without notice. Customers are responsible for obtaining the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to

PLE’s terms and conditions of sale supplied at the time of order acknowledgment.

PLE warrants performance of this product to the specifications applicable at the time of sale in accordance

with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE

deems necessary to support this warranty. Except where mandated by specific contractual documents,

testing of all parameters of each product is not necessarily performed.

PLE assumes no liability for application assistance or customer product design. Customers are

responsible for their products and applications using PLE components. To minimize the risks associated

with the customer products and applications, customers should provide adequate design and operating

safeguards.

PLE products are not designed, intended, authorized or warranted to be suitable for use in life support

applications, devices or systems or other critical applications that may involve potential risks of death,

personal injury or severe property or environmental damage. Inclusion of PLE products in such

applications is understood to be fully at the risk of the customer. Use of PLE products in such applications

requires the written approval of an appropriate PLE officer. Questions concerning potential risk

applications should be directed to PLE.

PLE does not warrant or represent that any license, either express or implied, is granted under any PLE

patent right, copyright, artwork or other intellectual property right relating to any combination, machine or

process which PLE product or services are used. Information published by PLE regarding third-party

products or services does not constitute a license from PLE to use such products or services or a warranty

or endorsement thereof. Use of such information may require a license from a third party under the

patents or other intellectual property of the third party, or a license from PLE under the patents or other

intellectual property of PLE.

Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is

without alteration and is accompanied by associated warranties, conditions, limitations and notices.

Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not

responsible or liable for such altered documents.

Resale of PLE products or services with statements different from or beyond the parameters stated by

PLE for that product or service voids all express and implied warranties for the associated PLE product or

service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.

Contacting Pletronics Inc.

Pletronics Inc. Tel: 425-776-1880

19013 36th Ave. W, Suite H Fax: 425-776-2760

Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com

URL: www.pletronics.com