Z8701016ASGR2837 - Zilog - Product.Network

Z8700001ZCO

CP95WRL0703

FEATURES

USTOMER

ROCUREMENT

PECIFICATION

CP95WRL0703 (10/95)

■Supported Devices

Packages Evaluation Programming/Emulation

100-Pin QFP Z8700016FSC N/A

84-Pin PLCC Z8700016VSC N/A

44-Pin QFP Z8701016FSC N/A

44-Pin PLCC Z8701016VSC N/A

■Two Jumper Configurable Circuit Boards

■Supports Real-Time Code Trace

■Direct Connect Logic Analyzer Probe Points

■Hosts Z87000 Emulation Tools

■Voice Processing Capability

■Z87010 ADPCM Encoder/Decoder

Z8700001ZCO

Z87000 DEVELOPMENT KIT

GENERAL DESCRIPTION

Zilog's Z87000 Development Kit is a member of the sup-

port tool family providing demonstration and evaluation of

spread-spectrum cordless phone transceiver/controllers.

The Z8700001ZCO kit includes two identical circuit boards

and the hardware required to operate as a cordless

telephone handset or base. Each circuit board contains a

Z87000 spread-spectrum transceiver/controller and a

Z87010 ADPCM encoder/decoder.

The kit enables jumper connection of the cordless phone

handset and base at intermediate frequency (IF). This

configuration demonstrates the voice processing quality

of the Z87000 system.

The kit circuit boards are socketed for easy replacement of

the Z87000 spread-spectrum transceiver/controller with

either the Zilog Z8700000ZEM ICEBOX™ in-circuit emula-

tor or Z8700000TSC emulation module as a platform for

software development.

SPECIFICATIONS KIT CONTENTS

Two Z87000 Evaluation Boards

Evaluation Base Board:

CMOS Z8700016VSC

CMOS Z8701016VSC or Z8937116VSC

(Programmable OTP for the Z87010)

Telephone Hybrid

Telephone Keypad

RJ14 Telephone Handset Interface

RJ11 Telephone Line Interface

Two (32K x 8) Static RAM

(32K x 4) Static RAM for Breakpoints

2 x 80-Pin Target Connectors

Two100-Pin HP-16500A Logic Analyzer

Interface Connector

Z87000 Emulation Pod (84-Lead PLCC)

Operating Conditions

Operating Temperature: 20°C, ±10°C

Supply Voltage: + 5 VDC

Evaluation Speed: 16.384 MHz

Power Requirements

+5 VDC @ 1.5A

Dimensions

Width: 6.25 in. (15.8 cm)

Length: 9.5 in. (24.1 cm)

Height: 2.5 in. (6.35 cm)

Telephone Interface

RJ11 Plug

Z8700001ZCO

CP95WRL0703

KIT CONTENTS (Continued)

Cables

Two IF Interface Cables

Two Telephone Handsets With Cords

One Telephone Line With RJ11 Plugs

Documentation

Zilog Z-Phone Development Kit User's Manual

Registration Card

Product Information Sheet

may be copied or reproduced in any form or by any means

without the prior written consent of Zilog, Inc. The information in

this document is subject to change without notice. Devices sold

by Zilog, Inc. are covered by warranty and patent indemnification

provisions appearing in Zilog, Inc. Terms and Conditions of Sale

only. Zilog, Inc. makes no warranty, express, statutory, implied or

by description, regarding the information set forth herein or

regarding the freedom of the described devices from intellectual

property infringement. Zilog, Inc. makes no warranty of mer-

chantability or fitness for any purpose. Zilog, Inc. shall not be

responsible for any errors that may appear in this document.

Zilog, Inc. makes no commitment to update or keep current the

information contained in this document.

Zilog’s products are not authorized for use as critical compo-

nents in life support devices or systems unless a specific written

agreement pertaining to such intended use is executed between

the customer and Zilog prior to use. Life support devices or

systems are those which are intended for surgical implantation

into the body, or which sustains life whose failure to perform,

when properly used in accordance with instructions for use

provided in the labeling, can be reasonably expected to result in

significant injury to the user.

Zilog, Inc. 210 East Hacienda Ave.

Campbell, CA 95008-6600

Telephone (408) 370-8000

Telex 910-338-7621

FAX 408 370-8056

Internet: http://www.zilog.com

PRECAUTIONS

1. The Z87000 R2017, when configured as the handset unit, will sometimes reset itself due to stack

overflow. A possible workaround is to reset the base.

2. Pulse dialing does not work due to incorrect software polarity control.

Note: The problems listed in Precautions No. 1 and No. 2 do not occur when using the Z87000 Emulation Module (Proto-

Pack), Zilog PN Z8700000TSC, or the Z87000 ICEBOX Emulator, Zilog PN Z8700000ZEM.

DOCUMENTATION ERRATA

Refer to the Z87000 ZPhone™ Development Kit User's Manual, Chapter 1, "Introduction." The Z8937116VSC is shipped

instead of the Z87010. The Z8937116VSC is the one-time programmable device version of the Z87010 that is

programmed with the latest Z87010 ROM code.