Z8700001ZCO CP95WRL0703 CUSTOMER PROCUREMENT SPECIFICATION Z8700001ZCO Z87000 DEVELOPMENT KIT FEATURES Supported Devices Packages 100-Pin QFP 84-Pin PLCC 44-Pin QFP 44-Pin PLCC Evaluation Programming/Emulation Z8700016FSC N/A Z8700016VSC N/A Z8701016FSC N/A Z8701016VSC N/A Two Jumper Configurable Circuit Boards Supports Real-Time Code Trace Direct Connect Logic Analyzer Probe Points Hosts Z87000 Emulation Tools Voice Processing Capability Z87010 ADPCM Encoder/Decoder GENERAL DESCRIPTION Zilog's Z87000 Development Kit is a member of the support tool family providing demonstration and evaluation of spread-spectrum cordless phone transceiver/controllers. The Z8700001ZCO kit includes two identical circuit boards and the hardware required to operate as a cordless telephone handset or base. Each circuit board contains a Z87000 spread-spectrum transceiver/controller and a Z87010 ADPCM encoder/decoder. The kit enables jumper connection of the cordless phone handset and base at intermediate frequency (IF). This configuration demonstrates the voice processing quality of the Z87000 system. The kit circuit boards are socketed for easy replacement of the Z87000 spread-spectrum transceiver/controller with either the Zilog Z8700000ZEM ICEBOXTM in-circuit emulator or Z8700000TSC emulation module as a platform for software development. SPECIFICATIONS KIT CONTENTS Operating Conditions Two Z87000 Evaluation Boards Operating Temperature: 20C, 10C Supply Voltage: + 5 VDC Evaluation Speed: 16.384 MHz Power Requirements +5 VDC @ 1.5A Dimensions Width: Length: Height: 6.25 in. (15.8 cm) 9.5 in. (24.1 cm) 2.5 in. (6.35 cm) Telephone Interface RJ11 Plug CP95WRL0703 (10/95) Evaluation Base Board: CMOS Z8700016VSC CMOS Z8701016VSC or Z8937116VSC (Programmable OTP for the Z87010) Telephone Hybrid Telephone Keypad RJ14 Telephone Handset Interface RJ11 Telephone Line Interface Two (32K x 8) Static RAM (32K x 4) Static RAM for Breakpoints 2 x 80-Pin Target Connectors Two100-Pin HP-16500A Logic Analyzer Interface Connector Z87000 Emulation Pod (84-Lead PLCC) 1 Z8700001ZCO CP95WRL0703 KIT CONTENTS (Continued) Cables Two IF Interface Cables Two Telephone Handsets With Cords One Telephone Line With RJ11 Plugs Documentation Zilog Z-Phone Development Kit User's Manual Registration Card Product Information Sheet PRECAUTIONS 1. The Z87000 R2017, when configured as the handset unit, will sometimes reset itself due to stack overflow. A possible workaround is to reset the base. 2. Pulse dialing does not work due to incorrect software polarity control. Note: The problems listed in Precautions No. 1 and No. 2 do not occur when using the Z87000 Emulation Module (ProtoPack), Zilog PN Z8700000TSC, or the Z87000 ICEBOX Emulator, Zilog PN Z8700000ZEM. DOCUMENTATION ERRATA Refer to the Z87000 ZPhoneTM Development Kit User's Manual, Chapter 1, "Introduction." The Z8937116VSC is shipped instead of the Z87010. The Z8937116VSC is the one-time programmable device version of the Z87010 that is programmed with the latest Z87010 ROM code. (c) 1995 by Zilog, Inc. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Zilog, Inc. The information in this document is subject to change without notice. Devices sold by Zilog, Inc. are covered by warranty and patent indemnification provisions appearing in Zilog, Inc. Terms and Conditions of Sale only. Zilog, Inc. makes no warranty, express, statutory, implied or by description, regarding the information set forth herein or regarding the freedom of the described devices from intellectual property infringement. Zilog, Inc. makes no warranty of merchantability or fitness for any purpose. Zilog, Inc. shall not be responsible for any errors that may appear in this document. Zilog, Inc. makes no commitment to update or keep current the information contained in this document. 2 Zilog's products are not authorized for use as critical components in life support devices or systems unless a specific written agreement pertaining to such intended use is executed between the customer and Zilog prior to use. Life support devices or systems are those which are intended for surgical implantation into the body, or which sustains life whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Zilog, Inc. 210 East Hacienda Ave. Campbell, CA 95008-6600 Telephone (408) 370-8000 Telex 910-338-7621 FAX 408 370-8056 Internet: http://www.zilog.com