AWL6153 2.4 GHz Wireless LAN Power Amplifier Module PRELIMINARY DATA SHEET - Rev 1.5 FEATURES * InGaP HBT Technology * < 3.5% EVM at +25 dBm Output Power (+5 V Supply), with 802.11g Modulation at 54 Mbps Data Rate * < 3% EVM at +21 dBm Output Power (+3.3 V Supply), with 802.11g Modulation at 54 Mbps Data Rate * +3 V to +5 V Supply * High Efficiency * RoHS-Compliant 4 mm x 4 mm x 1.41 mm Surface Mount Module * 50 - Matched RF Ports for Reduced External Component Count * MSL-3 Rating M7 Package 10 Pin 4 mm x 4 mm x 1.41 mm Surface Mount Module APPLICATIONS * 802.11g/b WLAN Stations and Client Cards * 802.11g/b WLAN Access Points PRODUCT DESCRIPTION The ANADIGICS AWL6153 WLAN Power Amplifier is an easy to use module that delivers high levels of linearity and efficiency for high data rate applications. Designed for the 2.4 GHz WLAN standards, it supports the 54 Mbps data rates specified in IEEE 802.11g. Requiring a single +3 V to +5 V supply and a reference voltage input, the AWL6153 reduces system power consumption by offering a low leakage current while the amplifier is shut down. VCC No external circuits are required for RF impedance matching, thus reducing component costs and making it easy to incorporate the device into new designs. The AWL6153 is manufactured using an advanced InGaP HBT technology that offers state-of-the-art reliability, temperature stability and ruggedness. It is offered in a 4 mm x 4 mm x 1.41 mm surface mount module optimized for a 50 system. VREF Bias Control RFIN Matching Network Matching Network GND Figure 1: Module Block Diagram 02/2007 RFOUT AWL6153 GND VCC 1 10 VCC RFIN 2 9 GND GND 3 8 RFOUT N/C 4 7 GND VREF 5 6 GND GND Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME DESCRIPTION 1 V CC Supply Voltage 2 RFIN RF Input 3 GND Ground 4 N/C No Connection 5 VREF Reference Voltage 6 GND Ground 7 GND Ground 8 RFOUT RF Output 9 GND Ground 10 V CC Supply Voltage PRELIMINARY DATA SHEET - Rev 1.5 02/2007 AWL6153 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC) 0 +5.5 V Reference Voltage (VREF) 0 +3.5 V RF Input Power (PIN) - +10 dB m Storage Temperature -40 +150 C Reflow Temperature - +250 C Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 2400 - 2485 MHz Supply Voltage (VCC) +3.0 - +5.5 V Reference Voltage (VREF) 0 +2.85 - +0.5 V RF Output Power (POUT) - +21 +25 +25 +28 - dB m Case Temperature (TC) -25 - +85 C COMMENTS PA"on" PA"shut down" V CC V CC V CC V CC = +3.3 = +5.0 = +3.3 = +5.0 V, 802.11g V, 802.11g V, 802.11b V, 802.11b modulation modulation modulation modulation The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. PRELIMINARY DATA SHEET - Rev 1.5 02/2007 3 AWL6153 Table 4: Electrical Specifications - 802.11g Modulation, 54 Mbps Data Rate (TC = +25 C, VCC = +3.3 V, VREF = +2.85 V, POUT = +21 dBm, 50 system) PARAMETER MIN TYP MAX UNIT Gain - 31.5 - dB Gain Ripple - - 0.3 dB Constellation RMS Error - 3 -30 - % dB Spectrum Mask at 11 MHz Offset - - -20 dB Spectrum Mask at 20 MHz Offset - - -28 dB Spectrum Mask at 30 MHz Offset - - -40 dB Current Consumption VCC VREF - 190 5.5 - mA Leakage Current - <10 - A VREF = 0 V Input Return Loss - <-10 - dB 50 impedance P 1dB - +28 - dB m Harmonics 2fo 3fo - -45 -56 - dB c On Time - 1.5 2.0 se c 10:1 - - VSWR Maximum load mismatch stress with no permanent degradation or failure COMMENTS within each channel CW tone Output power achieves 90% of steady-state level (1), VREF toggled from 0 V to +2.85 V VCC = +5.5 V Note: (1) Steady-state output is defined as a power level that is consistent or changing at a rate less than 0.05 dB/sec. 4 PRELIMINARY DATA SHEET - Rev 1.5 02/2007 AWL6153 Table 5: Electrical Specifications - 802.11g Modulation, 54 Mbps Data Rate (TC = +25 C, VCC = +5 V, VREF = +2.85 V, POUT = +25 dBm, 50 system) PARAMETER MIN TYP MAX UNIT Gain - 32.5 - dB Gain Ripple - - 0.3 dB Constellation RMS Error - 3.5 -29 - % dB Spectrum Mask at 11 MHz Offset - - -20 dB Spectrum Mask at 20 MHz Offset - - -28 dB Spectrum Mask at 30 MHz Offset - - -40 dB Current Consumption VCC VREF - 290 5.5 - mA Leakage Current - <10 - A VREF = 0 V Input Return Loss - <-10 - dB 50 impedance P 1dB - +31 - dB m Harmonics 2fo 3fo - -42 -56 - dB c On Time - 1.5 2.0 se c 10:1 - - VSWR Maximum load mismatch stress with no permanent degradation or failure COMMENTS within each channel CW tone Output power achieves 90% of steady-state level (1), VREF toggled from 0 V to +2.85 V VCC = +5.5 V Note: (1) Steady-state output is defined as a power level that is consistent or changing at a rate less than 0.05 dB/sec. PRELIMINARY DATA SHEET - Rev 1.5 02/2007 5 AWL6153 Table 6: Electrical Specifications - 802.11b Modulation (TC = +25 C, VCC = +3.3 V, VREF = +2.85 V, POUT = +25 dBm, 50 system) PARAMETER MIN TYP MAX UNIT Gain - 31.5 - dB First Sidelobe Power - - -30 dB c Gaussian Filtering Second Sidelobe Power - - -50 dB c Gaussian Filtering Current Consumption VCC VREF - 300 5.5 - mA Leakage Current - <10 - A VREF = 0 V Input Return Loss - <-10 - dB 50 impedance P 1dB - +28 - dB m Harmonics 2fo 3fo - -50 -63 - dB c On Time - 1.5 2.0 se c 10:1 - - VSWR Maximum load mismatch stress with no permanent degradation or failure COMMENTS CW tone CW Input Output power achieves 90% of steady-state level (1), VREF toggled from 0 V to +2.85 V VCC = +5.5 V Note: (1) Steady-state output is defined as a power level that is consistent or changing at a rate less than 0.05 dB/sec. 6 PRELIMINARY DATA SHEET - Rev 1.5 02/2007 AWL6153 Table 7: Electrical Specifications - 802.11b Modulation (TC = +25 C, VCC = +5 V, VREF = +2.85 V, POUT = +28 dBm, 50 system) PARAMETER MIN TYP MAX UNIT Gain - 32.5 - dB First Sidelobe Power - - -30 dB c Gaussian Filtering Second Sidelobe Power - - -50 dB c Gaussian Filtering Current Consumption VCC VREF - 420 5.5 - mA Leakage Current - <10 - A VREF = 0 V Input Return Loss - <-10 - dB 50 impedance P 1dB - +31 - dB m Harmonics 2fo 3fo - -50 -63 - dB c On Time - 1.5 2.0 se c 10:1 - - VSWR Maximum load mismatch stress with no permanent degradation or failure COMMENTS CW tone CW Input Output power achieves 90% of steady-state level (1), VREF toggled from 0 V to +2.85 V VCC = +5.5 V Note: (1) Steady-state output is defined as a power level that is consistent or changing at a rate less than 0.05 dB/sec. PRELIMINARY DATA SHEET - Rev 1.5 02/2007 7 AWL6153 PERFORMANCE DATA Figure 3: EVM and Gain vs. Frequency (TA = +25 C, VCC = +3.3 V, VREF = +2.85 V, POUT = +21 dBm, 54 Mbps 802.11g) 10 36 10 34 8 6 32 6 32 4 30 4 30 2 28 2 28 2440 0 2400 2420 2440 Figure 5: Gain and Current Consumption vs. Output Power (TA = +25 C, VCC = +3.3 V, VREF = +2.85 V, f = 2472 MHz, 54 Mbps 802.11g) Figure 6: Gain and Current Consumption vs. Output Power (TA = +25 C, VCC = +5 V, VREF = +2.85 V, f = 2472 MHz, 54 Mbps 802.11g) 350 36 500 34 290 34 420 32 230 32 340 30 170 30 260 Gain (dB) 36 Current (mA) Gain (dB) Frequency (MHz) Gain Gain Current 26 10 12 14 16 18 20 22 24 26 110 28 50 26 180 Current 100 14 16 18 Output Power (dBm) 8 26 2480 2460 Frequency (MHz) 28 20 22 24 Output Power (dBm) PRELIMINARY DATA SHEET - Rev 1.5 02/2007 26 Gain (dB) EVM (%) 26 2480 2460 34 Gain 28 30 Current (mA) 2420 Gain (dB) Gain 0 2400 36 EVM EVM 8 EVM (%) Figure 4: EVM and Gain vs. Frequency (TA = +25 C, VCC = +5 V, VREF = +2.85 V, POUT = +25 dBm, 54 Mbps 802.11g) AWL6153 36 300 34 180 34 260 32 160 32 220 30 140 30 180 Gain (dB) 200 Current (mA) Gain (dB) 36 Gain 28 Current 26 2.4 2.5 2.6 2.7 2.8 2.9 3 Gain 120 28 100 26 3.1 140 Current 100 2.4 2.5 2.6 Vref (V) 2.7 2.8 2.9 3 3.1 Vref (V) Figure 10: EVM vs. Output Power (TA = +25 C, VREF = +2.85 V, f = 2472 MHz, 54 Mbps 802.11g) Figure 9: EVM vs. VREF (TA = +25 C, f = 2472 MHz, 54 Mbps 802.11g) 10 10 Vcc = +3.3V, Pout = +21 dBm 8 Vcc = +3.3V 8 Vcc = +5 V Vcc = +5 V, Pout = +25 dBm 6 EVM (%) EVM (%) Current (mA) Figure 8: Gain and Current Consumption vs. VREF (TA = +25 C, VCC = +5 V, f = 2472 MHz, POUT = +25 dBm, 54 Mbps 802.11g) Figure 7: Gain and Current Consumption vs. VREF (TA = +25 C, VCC = +3.3 V, f = 2472 MHz, POUT = +21 dBm, 54 Mbps 802.11g) 4 6 4 2 2 0 0 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 10 15 20 25 30 Output Power (dBm) Vref (V) PRELIMINARY DATA SHEET - Rev 1.5 02/2007 9 AWL6153 APPLICATION INFORMATION The only external components required for the AWL6153 are bypass capacitors for the supply (see Figure 11). When VREF is pulled down to 0 V, the amplifier is placed in a low-current shut down mode. VCC1 22uF tantalum (optional) RF IN 0.01uF 1 VCC 2 RFIN GND 3 GND RFOUT 8 4 N/C GND 7 5 VREF GND 6 x VREF VCC 10 9 GND at slug Figure 11: Application Circuit 10 PRELIMINARY DATA SHEET - Rev 1.5 02/2007 RF OUT AWL6153 PACKAGE OUTLINE .10[0.004] D PIN#1 INDICATOR A e (PITCH) E PIN#1 INDICATOR E1 b A1 S D1 MILLIMETERS Y M B O L MIN. INCHES NOTE NOM. MAX. MIN. NOM. MAX. A 1.26 1.41 1.56 0.049 0.055 0.061 - A1 - 0.30 - - 0.012 - - b 0.60 0.013 - 0.024 3 0.35 - c - 0.10 - - 0.004 - - D 3.88 4.00 4.12 0.152 0.157 0.162 - D1 1.90 - 2.20 0.075 - 0.086 - E 3.88 4.00 4.12 0.152 0.157 0.162 - E1 3.75 - 3.85 0.148 - 0.152 - e L 0.85 0.35 - 0.033 0.60 0.013 - L c (PULL BACK) NOTES: 1. CONTROLLING DIMENSIONS: MILLIMETERS 2. UNLESS SPECIFIED TOLERANCE=0.076[0.003]. 3. PADS (INCLUDING CENTER) SHOWN UNIFORM SIZE FOR REFERENCE ONLY. ACTUAL PAD SIZE AND LOCATION WILL VARY WITHIN MIN. AND MAX. DIMENSIONS ACCORDING TO SPECIFIC LAMINATE DESIGN. 3 0.024 3 Figure 12: M7 Package Outline - 10 Pin 4 mm x 4 mm x 1.41 mm Surface Mount Module PRELIMINARY DATA SHEET - Rev 1.5 02/2007 11 AWL6153 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING AWL6153M7UQ1 -25 C to +85C 10 Pin 4 mm x 4 mm x 1.41 mm Surface Mount Module 1,000 piece Tape and Reel AWL6153M7UP0 -25 C to +85C 10 Pin 4 mm x 4 mm x 1.41 mm Surface Mount Module 1-999 Piece Tube AWL6153M7UP6 -25 C to +85C 10 Pin 4 mm x 4 mm x 1.41 mm Surface Mount Module 1-999 Piece Tray AWL6153M7UP8 -25 C to +85C 10 Pin 4 mm x 4 mm x 1.41 mm Surface Mount Module 2,500 piece Tape and Reel EVA6153M7U -25 C to +85C 10 Pin 4 mm x 4 mm x 1.41 mm Surface Mount Module 1 Piece Evaluation Board ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 12 PRELIMINARY DATA SHEET - Rev 1.5 02/2007