SPEC NO: DSAD1291 REV NO: V.5 DATE: MAY/08/2007 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1202000542
SUBMINIATURE SOLID STATE LAMP
Part Number: AM2520MGC09 Mega Green
Features
SUBMINIA TURE PACKAGE.
WIDE VIEWING ANGLE.
Z-BEND LEAD.
LONG LIFE - SOLID STATE RELIABILITY.
LOW PACKAGE PROFILE.
MOISTURE SENSITIVITY LEVEL : LEVEL 3.
PACKAGE : 1000PCS / REEL.
RoHS COMPLIANT.
Description
The Mega Green source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1291 REV NO: V.5 DATE: MAY/08/2007 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1202000542
Selection Guide
Notes:
1. >1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Viewing
Angle [1]
Min. Typ. 2<1/2
AM2520MGC09 Mega Green (InGaAlP) WATER CLEAR 280 600 20°
Iv (mcd) [2]
@20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
Gpeak Peak Wavelength Mega Green 574 nm IF=20mA
GD[1] Dominant Wavelength Mega Green 568 nm IF=20mA
LG1/2 Spectral Line Half-width Mega Green 26 nm IF=20mA
CCapacitance Mega Green 20 pF VF=0V;f=1MHz
VF[2] Forward Voltage Mega Green 2.1 2.5 V IF=20mA
IRReverse Current Mega Green 10 uA VR=5V
Parameter Mega Green Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAD1291 REV NO: V.5 DATE: MAY/08/2007 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1202000542
Mega Green AM2520MGC09
SPEC NO: DSAD1291 REV NO: V.5 DATE: MAY/08/2007 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1202000542
AM2520MGC09
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1291 REV NO: V.5 DATE: MAY/08/2007 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1202000542
PACKING & LABEL SPECIFICATIONS AM2520MGC09
