PRODUCT FAMILY DATA SHEET
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo,
XLamp® and EasyWhite® are registered trademarks and eTone™ is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS206 REV 1B
Cree® XLamp® CMA1306 LED
PRODUCT DESCRIPTION
Cree’s XLamp® High-Current LED Array family is optimized
for best‑in‑class lumen output, efcacy and reliability at high
drive currents. XLamp CMA LEDs share the same package
design and LES sizes as Cree’s industry-leading CXA2 Standard
Density LEDs, enabling lighting manufacturers to address a
range of performance requirements for applications such as
track, downlight and outdoor lighting using a single easy-to-use
platform. XLamp High-Current LED Arrays are available in 2-step,
3-step and 5-step EasyWhite® bins.
High-Current LED Arrays are now available in two different
versions: Standard and eTone™ LEDs.
The eTone version delivers beautiful 90 CRI light quality at the
same efcacy as today’s standard 80 CRI LEDs. Featuring the
same mechanical and optical characteristics as the Standard
version, the eTone LEDs allow easy upgrades from 80 CRI to 90
CRI without sacricing performance.
FEATURES
• 6-mm optical source
• Mechanical and optical design consistent with CXA13 and
CXB13 LEDs
• Cree EasyWhite® 2-, 3- and 5-step binning
• Premium Color 2- and 3-step binning
• Standard & Premium Color LEDs available in 70, 80, 90 and
95 CRI minimum options
• eTone LEDs available in 90 and 95 CRI minimum options
• Forward voltage options: 9‑V class, 18‑V class & 36‑V class
• 85°C binning and characterization
• Maximum drive current: 1600mA (9V), 800mA (18V),
400mA (36V)
• 116° viewing angle, uniform chromaticity profile
• Top-side solder connections
• UL® recognized component (E349212)
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLAMP® CMA1306 LED
TABLE OF CONTENTS
Characteristics ....................................................................................................................................................................................................... 3
Operating Limits ..................................................................................................................................................................................................... 4
Flux Characteristics, Order Codes & Bins ‑ Standard LEDs ‑ 9V ......................................................................................................................... 7
Flux Characteristics, Order Codes & Bins ‑ Standard LEDs, Premium Color ‑ 9V .............................................................................................. 8
Flux Characteristics, Order Codes and Bins ‑ eTone™ LEDs ‑ 9V ....................................................................................................................... 9
Flux Characteristics, Order Codes & Bins ‑ Standard LEDs ‑ 18V ..................................................................................................................... 10
Flux Characteristics, Order Codes & Bins ‑ Standard LEDs, Premium Color ‑ 18V .......................................................................................... 11
Flux Characteristics, Order Codes and Bins ‑ eTone™ LEDs ‑ 18V ................................................................................................................... 12
Flux Characteristics, Order Codes & Bins ‑ Standard LEDs ‑ 36V ..................................................................................................................... 13
Flux Characteristics, Order Codes & Bins ‑ Standard LEDs, Premium Color ‑ 36V .......................................................................................... 14
Flux Characteristics, Order Codes and Bins ‑ eTone™ LEDs ‑ 36V ................................................................................................................... 15
Relative Spectral Power Distribution - Standard LEDs ....................................................................................................................................... 16
Relative Spectral Power Distribution - Standard LEDs, Premium Color ............................................................................................................ 17
Relative Spectral Power Distribution - eTone™ LEDs ......................................................................................................................................... 19
Electrical Characteristics ..................................................................................................................................................................................... 20
Relative Luminous Flux ........................................................................................................................................................................................ 22
Typical Spatial Distribution .................................................................................................................................................................................. 24
EasyWhite® Performance Groups - Chromaticity ............................................................................................................................................... 25
Premium Color Performance Groups - Chromaticity ......................................................................................................................................... 26
Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space ............................................................................................................................ 27
Cree Premium Color Bins Plotted on the 1931 CIE Color Space ...................................................................................................................... 28
Bin and Order Code Formats ............................................................................................................................................................................... 30
Mechanical Dimensions ...................................................................................................................................................................................... 31
Thermal Design .................................................................................................................................................................................................... 32
Notes .................................................................................................................................................................................................................... 34
Packaging ............................................................................................................................................................................................................. 35
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLAMP® CMA1306 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Viewing angle (FWHM) degrees 116
ESD withstand voltage (JEDEC JS‑001‑2012) Class 3A
DC forward current (9V) mA 2400*
DC forward current (18V) mA 1200*
DC forward current (36V) mA 600*
Reverse current mA 0.1
Forward voltage (9V, 800mA, 85°C) V 9 10.75
Forward voltage (18V, 400mA, 85°C) V18 21.5
Forward voltage (36V, 200mA, 85°C) V 36 43
* Refer to the Operating Limits section.
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLAMP® CMA1306 LED
OPERATING LIMITS
The maximum current rating of the CMA1306 depends on the case temperature (Tc) when the LED has reached thermal equilibrium
under steady‑state operation. The graph shown below assumes that the system design employs good thermal management (thermal
interface material and heat sink) and may vary when poor thermal management is employed. Either solder pad shown in the Mechanical
Dimensions section on page 31 can be used as the Tc measurement point.
Another important factor in good thermal management is the temperature of the Light Emitting Surface (LES). Cree recommends a
maximum LES temperature of 140°C to ensure optimal LED lifetime. Please refer to the Thermal Design section on page 32 for more
information on LES temperature measurement.
CMA1306 - 9 V
0
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
85 °C, 2400 mA
125 °C,
920 mA
9 V
Standard LEDs
CMA1306 - 9 V eTone
0
200
400
600
800
1000
1200
1400
1600
1800
2000
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
85 °C, 1600 mA 9 V
eTone LEDs
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLAMP® CMA1306 LED
OPERATING LIMITS - CONTINUED
CMA1306 - 18 V
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
85 °C, 1200 mA
125 °C,
460 mA
18 V
Standard LEDs
CMA1306 - 18 V eTone
0
100
200
300
400
500
600
700
800
900
1000
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
85 °C, 800 mA 18 V
eTone LEDs
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLAMP® CMA1306 LED
OPERATING LIMITS - CONTINUED
CMA1306 - 36 V
0
50
100
150
200
250
300
350
400
450
500
550
600
650
700
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
85 °C, 600 mA
125 °C,
230 mA
36 V
Standard LEDs
CMA1306 - 36 V eTone
0
50
100
150
200
250
300
350
400
450
500
025 50 75 100 125 150
If (mA)
Case Temperature (°C)
85 °C, 400 mA 36 V
eTone LEDs
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLAMP® CMA1306 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 34).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS - 9V (IF = 800mA, TJ=85°C)
The following table provides order codes for XLamp CMA1306 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 30).
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step 5-Step
Min. Typ Group Order Code Group Order Code Group Order Code
6500 K
70 73 981 1055 65E CMA1306-0000-
000C0B0A65E
80 82 916 985 65E CMA1306-0000-
000C0H0A65E
5700 K
70 73 1001 1076 57E CMA1306-0000-
000C0B0A57E
80 82 935 1005 57E CMA1306-0000-
000C0H0A57E
90 92 795 855 57G CMA1306-0000-
000C0U0A57G
5000K
70 73 972 1045 50E CMA1306-0000-
000C0B0A50E
80 82 908 976 50G CMA1306-0000-
000C0H0A50G
90 92 795 855 50G CMA1306-0000-
000C0U0A50G
4000K
70 73 964 1037 40E CMA1306-0000-
000C0B0A40E
80 82 897 965 40H CMA1306-0000-
000C0H0A40H 40G CMA1306-0000-
000C0H0A40G
90 92 773 831 40H CMA1306-0000-
000C0U0A40H 40G CMA1306-0000-
000C0U0A40G
3500K
80 82 875 941 35H CMA1306-0000-
000C0H0A35H 35G CMA1306-0000-
000C0H0A35G
90 92 752 808 35H CMA1306-0000-
000C0U0A35H 35G CMA1306-0000-
000C0U0A35G
3000K
70 73 897 965 30E CMA1306-0000-
000C0B0A30E
80 82 850 914 30H CMA1306-0000-
000C0H0A30H 30G CMA1306-0000-
000C0H0A30G
90 92 719 773 30H CMA1306-0000-
000C0U0A30H 30G CMA1306-0000-
000C0U0A30G
2700K
80 82 816 877 27H CMA1306-0000-
000C0H0A27H 27G CMA1306-0000-
000C0H0A27G
90 92 686 738 27H CMA1306-0000-
000C0U0A27H 27G CMA1306-0000-
000C0U0A27G
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLAMP® CMA1306 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 34).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS, PREMIUM COLOR - 9V (IF = 800mA, TJ =
85°C)
Fidelity
Nominal
CCT
CRI* Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step
Min. Typ Group Order Code
4000K 95 98 692 744 L5A CMA1306-0000-000C0Z0AL5A
3500K 95 98 673 724 35H CMA1306-0000-000C0Z0A35H
3000K 95 98 630 677 30H CMA1306-0000-000C0Z0A30H
2700K 95 98 596 641 27H CMA1306-0000-000C0Z0A27H
Specialty
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code Group Order Code
3100K 90 92 719 773 31Q CMA1306-0000-
000C0U0A31Q
3000K
80 82 850 914 L7B CMA1306-0000-
000C0H0AL7B
90 92 719 773 30Q CMA1306-0000-
000C0U0A30Q 30U CMA1306-0000-
000C0U0A30U
95 98 630 677 L7C CMA1306-0000-
000C0Z0AL7C
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLAMP® CMA1306 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 34).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, ORDER CODES AND BINS - ETONE™ LEDS - 9V (IF = 800mA, TJ = 85°C)
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code
4000K 90 92 825 888 40H CMA1306-0000-00PC0U0A40H 40G CMA1306-0000-00PC0U0A40G
95 98 734 789 L5A CMA1306-0000-00PC0Z0AL5A
3500K
90 92 814 875 35H CMA1306-0000-00PC0U0A35H 35G CMA1306-0000-00PC0U0A35G
95 98 719 773 35H CMA1306-0000-00PC0Z0A35H
3000K
90 92 808 868 30H CMA1306-0000-00PC0U0A30H 30G CMA1306-0000-00PC0U0A30G
95 98 697 750 30H CMA1306-0000-00PC0Z0A30H
2700K
90 92 775 833 27H CMA1306-0000-00PC0U0A27H 27G CMA1306-0000-00PC0U0A27G
95 98 665 716 27H CMA1306-0000-00PC0Z0A27H
Specialty
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code Group Order Code
3100K 90 92 799 859 31Q CMA1306-0000-
00PC0U0A31Q
3000K
90 92 808 868 30Q CMA1306-0000-
00PC0U0A30Q 30U CMA1306-0000-
00PC0U0A30U
95 98 677 730 L7C CMA1306-0000-
00PC0Z0AL7C
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLAMP® CMA1306 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 34).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS - 18V (IF = 400mA, TJ=85°C)
The following table provides order codes for XLamp CMA1306 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 30).
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step 5-Step
Min. Typ Group Order Code Group Order Code Group Order Code
6500 K
70 73 981 1055 65E CMA1306-0000-
000F0B0A65E
80 82 916 985 65E CMA1306-0000-
000F0H0A65E
5700 K
70 73 1001 1076 57E CMA1306-0000-
000F0B0A57E
80 82 935 1005 57E CMA1306-0000-
000F0H0A57E
90 92 795 855 57G CMA1306-0000-
000F0U0A57G
5000K
70 73 972 1045 50E CMA1306-0000-
000F0B0A50E
80 82 908 976 50G CMA1306-0000-
000F0H0A50G
90 92 795 855 50G CMA1306-0000-
000F0U0A50G
4000K
70 73 964 1037 40E CMA1306-0000-
000F0B0A40E
80 82 897 965 40H CMA1306-0000-
000F0H0A40H 40G CMA1306-0000-
000F0H0A40G
90 92 773 831 40H CMA1306-0000-
000F0U0A40H 40G CMA1306-0000-
000F0U0A40G
3500K
80 82 875 941 35H CMA1306-0000-
000F0H0A35H 35G CMA1306-0000-
000F0H0A35G
90 92 752 808 35H CMA1306-0000-
000F0U0A35H 35G CMA1306-0000-
000F0U0A35G
3000K
70 73 897 965 30E CMA1306-0000-
000F0B0A30E
80 82 850 914 30H CMA1306-0000-
000F0H0A30H 30G CMA1306-0000-
000F0H0A30G
90 92 719 773 30H CMA1306-0000-
000F0U0A30H 30G CMA1306-0000-
000F0U0A30G
2700K
80 82 816 877 27H CMA1306-0000-
000F0H0A27H 27G CMA1306-0000-
000F0H0A27G
90 92 686 738 27H CMA1306-0000-
000F0U0A27H 27G CMA1306-0000-
000F0U0A27G
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLAMP® CMA1306 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 34).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS, PREMIUM COLOR - 18V (IF = 400mA, TJ =
85°C)
Fidelity
Nominal
CCT
CRI* Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step
Min. Typ Group Order Code
4000K 95 98 692 744 L5A CMA1306‑0000‑000F0Z0AL5A
3500K 95 98 673 724 35H CMA1306‑0000‑000F0Z0A35H
3000K 95 98 630 677 30H CMA1306‑0000‑000F0Z0A30H
2700K 95 98 596 641 27H CMA1306‑0000‑000F0Z0A27H
Specialty
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code Group Order Code
3100K 90 92 719 773 31Q CMA1306-0000-
000F0U0A31Q
3000K
80 82 850 914 L7B CMA1306-0000-
000F0H0AL7B
90 92 719 773 30Q CMA1306-0000-
000F0U0A30Q 30U CMA1306-0000-
000F0U0A30U
95 98 630 677 L7C CMA1306-0000-
000F0Z0AL7C
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLAMP® CMA1306 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 34).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, ORDER CODES AND BINS - ETONE™ LEDS - 18V (IF = 400mA, TJ = 85°C)
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code
4000K 90 92 825 888 40H CMA1306‑0000‑00PF0U0A40H 40G CMA1306‑0000‑00PF0U0A40G
95 98 734 789 L5A CMA1306‑0000‑00PF0Z0AL5A
3500K
90 92 814 875 35H CMA1306‑0000‑00PF0U0A35H 35G CMA1306‑0000‑00PF0U0A35G
95 98 719 773 35H CMA1306‑0000‑00PF0Z0A35H
3000K
90 92 808 868 30H CMA1306‑0000‑00PF0U0A30H 30G CMA1306‑0000‑00PF0U0A30G
95 98 697 750 30H CMA1306‑0000‑00PF0Z0A30H
2700K
90 92 775 833 27H CMA1306‑0000‑00PF0U0A27H 27G CMA1306‑0000‑00PF0U0A27G
95 98 665 716 27H CMA1306‑0000‑00PF0Z0A27H
Specialty
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code Group Order Code
3100K 90 92 799 859 31Q CMA1306-0000-
00PF0U0A31Q
3000K
90 92 808 868 30Q CMA1306-0000-
00PF0U0A30Q 30U CMA1306-0000-
00PF0U0A30U
95 98 677 730 L7C CMA1306-0000-
00PF0Z0AL7C
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLAMP® CMA1306 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 34).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS - 36V (IF = 200mA, TJ=85°C)
The following table provides order codes for XLamp CMA1306 LEDs. For a complete description of the order code nomenclature, please
see the Bin and Order Code Formats section (page 30).
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step 5-Step
Min. Typ Group Order Code Group Order Code Group Order Code
6500 K
70 73 981 1055 65E CMA1306-0000-
000N0B0A65E
80 82 916 985 65E CMA1306-0000-
000N0H0A65E
5700 K
70 73 1001 1076 57E CMA1306-0000-
000N0B0A57E
80 82 935 1005 57E CMA1306-0000-
000N0H0A57E
90 92 795 855 57G CMA1306-0000-
000N0U0A57G
5000K
70 73 972 1045 50E CMA1306-0000-
000N0B0A50E
80 82 908 976 50G CMA1306-0000-
000N0H0A50G
90 92 795 855 50G CMA1306-0000-
000N0U0A50G
4000K
70 73 964 1037 40E CMA1306-0000-
000N0B0A40E
80 82 897 965 40H CMA1306-0000-
000N0H0A40H 40G CMA1306-0000-
000N0H0A40G
90 92 773 831 40H CMA1306-0000-
000N0U0A40H 40G CMA1306-0000-
000N0U0A40G
3500K
80 82 875 941 35H CMA1306-0000-
000N0H0A35H 35G CMA1306-0000-
000N0H0A35G
90 92 752 808 35H CMA1306-0000-
000N0U0A35H 35G CMA1306-0000-
000N0U0A35G
3000K
70 73 897 965 30E CMA1306-0000-
000N0B0A30E
80 82 850 914 30H CMA1306-0000-
000N0H0A30H 30G CMA1306-0000-
000N0H0A30G
90 92 719 773 30H CMA1306-0000-
000N0U0A30H 30G CMA1306-0000-
000N0U0A30G
2700K
80 82 816 877 27H CMA1306-0000-
000N0H0A27H 27G CMA1306-0000-
000N0H0A27G
90 92 686 738 27H CMA1306-0000-
000N0U0A27H 27G CMA1306-0000-
000N0U0A27G
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLAMP® CMA1306 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 34).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, ORDER CODES & BINS - STANDARD LEDS, PREMIUM COLOR - 36V (IF = 200mA, TJ =
85°C)
Fidelity
Nominal
CCT
CRI* Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step
Min. Typ Group Order Code
4000K 95 98 692 744 L5A CMA1306-0000-000N0Z0AL5A
3500K 95 98 673 724 35H CMA1306-0000-000N0Z0A35H
3000K 95 98 630 677 30H CMA1306-0000-000N0Z0A30H
2700K 95 98 596 641 27H CMA1306-0000-000N0Z0A27H
Specialty
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code Group Order Code
3100K 90 92 719 773 31Q CMA1306-0000-
000N0U0A31Q
3000K
80 82 850 914 L7B CMA1306-0000-
000N0H0AL7B
90 92 719 773 30Q CMA1306-0000-
000N0U0A30Q 30U CMA1306-0000-
000N0U0A30U
95 98 630 677 L7C CMA1306-0000-
000N0Z0AL7C
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLAMP® CMA1306 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 34).
• For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60.
FLUX CHARACTERISTICS, ORDER CODES AND BINS - ETONE™ LEDS - 36V (IF = 200mA, TJ = 85°C)
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code
4000K 90 92 825 888 40H CMA1306-0000-00PN0U0A40H 40G CMA1306-0000-00PN0U0A40G
95 98 734 789 L5A CMA1306-0000-00PN0Z0AL5A
3500K
90 92 814 875 35H CMA1306-0000-00PN0U0A35H 35G CMA1306-0000-00PN0U0A35G
95 98 719 773 35H CMA1306-0000-00PN0Z0A35H
3000K
90 92 808 868 30H CMA1306-0000-00PN0U0A30H 30G CMA1306-0000-00PN0U0A30G
95 98 697 750 30H CMA1306-0000-00PN0Z0A30H
2700K
90 92 775 833 27H CMA1306-0000-00PN0U0A27H 27G CMA1306-0000-00PN0U0A27G
95 98 665 716 27H CMA1306-0000-00PN0Z0A27H
Specialty
Nominal
CCT
CRI Minimum
Luminous
Flux (lm)
Typical
Luminous
Flux (lm)
2-Step 3-Step
Min. Typ Group Order Code Group Order Code Group Order Code
3100K 90 92 799 859 31Q CMA1306-0000-
00PN0U0A31Q
3000K
90 92 808 868 30Q CMA1306-0000-
00PN0U0A30Q 30U CMA1306-0000-
00PN0U0A30U
95 98 677 730 L7C CMA1306-0000-
00PN0Z0AL7C
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLAMP® CMA1306 LED
RELATIVE SPECTRAL POWER DISTRIBUTION - STANDARD LEDS
The following graphs are the result of a series of pulsed measurements at 800mA for the 9‑V CMA1306 LED, 400 mA for the 18‑V
CMA1306 LED and 200mA for the 36‑V CMA1306 LED and TJ = 85°C.
Relative Spectral Power Distribution
EZW 70 CRI
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
6500 K, 70 CRI
5700 K, 70 CRI
5000 K, 70 CRI
4000 K, 70 CRI
3000 K, 70 CRI
EZW 80 CRI
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
6500 K, 80 CRI
5700 K, 80 CRI
5000 K, 80 CRI
4000 K, 80 CRI
3500 K, 80 CRI
3000 K, 80 CRI
2700 K, 80 CRI
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLAMP® CMA1306 LED
RELATIVE SPECTRAL POWER DISTRIBUTION - STANDARD LEDS (CONTINUED)
RELATIVE SPECTRAL POWER DISTRIBUTION - STANDARD LEDS, PREMIUM COLOR
The following graphs are the result of a series of pulsed measurements at 800mA for the 9‑V CMA1306 LED, 400 mA for the 18‑V
CMA1306 LED and 200mA for the 36‑V CMA1306 LED and TJ = 85°C.
Fidelity
EZW 90 CRI
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
5700 K, 90 CRI
5000 K, 90 CRI
4000 K, 90 CRI
3500 K, 90 CRI
3000 K, 90 CRI
2700 K, 90 CRI
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
4000 K, Z CRI
3500 K, Z CRI
3000 K, Z CRI
2700 K, Z CRI
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLAMP® CMA1306 LED
RELATIVE SPECTRAL POWER DISTRIBUTION - STANDARD LEDS, PREMIUM COLOR (CONTINUED)
Specialty
Speciality
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
31Q, 3100 K, 90 CRI
Speciality
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
30Q, 3000 K, 90 CRI
30U, 3000 K, 90 CRI
L7B, 3000 K, 80 CRI
L7C, 3000 K, Z CRI
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLAMP® CMA1306 LED
RELATIVE SPECTRAL POWER DISTRIBUTION - ETONE™ LEDS
The following graphs are the result of a series of pulsed measurements at 800mA for the 9‑V CMA1306 LED, 400 mA for the 18‑V
CMA1306 LED and 200mA for the 36‑V CMA1306 LED and TJ = 85°C.
eTone
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
4000 K, 90 CRI
3500 K,90 CRI
3000 K, 90 CRI
2700 K, 90 CRI
eTone
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
4000 K, Z CRI
3500 K, Z CRI
3000 K, Z CRI
2700 K, Z CRI
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLAMP® CMA1306 LED
ELECTRICAL CHARACTERISTICS
The following graphs are the result of a series of steady-state measurements.
8.25
8.50
8.75
9.00
9.25
9.50
9.75
10.00
10.25
10.50
10.75
11.00
400 600 800 1000 1200 1400 1600 1800 2000 2200 2400
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
9 V
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
20.5
21.0
21.5
22.0
200 300 400 500 600 700 800 900 1000 1100 1200
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
18 V
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLAMP® CMA1306 LED
ELECTRICAL CHARACTERISTICS - CONTINUED
33
34
35
36
37
38
39
40
41
42
43
44
100 150 200 250 300 350 400 450 500 550 600
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
36 V
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLAMP® CMA1306 LED
RELATIVE LUMINOUS FLUX
The relative luminous ux values provided below are the ratio of:
• Measurements of CMA1306 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 800mA at TJ = 85°C for the 9‑V CMA1306 LED.
Using the 9‑V CMA1306 LED as an example, at steady‑state operation of Tc = 25°C, IF = 1400mA, the relative luminous ux ratio is 180%
in the chart below. A 9‑V CMA1306 LED that measures 1001lm during binning will deliver 1802lm (1001 * 1.8) at steady‑state operation
of Tc=25°C, IF = 1400mA.
0%
30%
60%
90%
120%
150%
180%
210%
240%
270%
400 600 800 1000 1200 1400 1600 1800 2000 2200 2400
Relative Luminous Flux
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
9 V
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLAMP® CMA1306 LED
RELATIVE LUMINOUS FLUX - CONTINUED
The relative luminous ux values provided below are the ratio of:
• Measurements of CMA1306 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 400mA at TJ = 85°C for the 18‑V CMA1306 LED.
Using the 18‑V CMA1306 LED as an example, at steady‑state operation of Tc = 25°C, IF = 700mA, the relative luminous ux ratio is 180% in
the chart below. An 18‑V CMA1306 LED that measures 1001lm during binning will deliver 1802lm (1001 * 1.8) at steady‑state operation
of Tc=25°C, IF = 700mA.
0%
30%
60%
90%
120%
150%
180%
210%
240%
270%
200 300 400 500 600 700 800 900 1000 1100 1200
Relative Luminous Flux
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
18 V
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLAMP® CMA1306 LED
RELATIVE LUMINOUS FLUX - CONTINUED
The relative luminous ux values provided below are the ratio of:
• Measurements of CMA1306 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 200mA at TJ = 85°C for the 36‑V CMA1306 LED.
Using the 36‑V CMA1306 LED as an example, at steady‑state operation of Tc = 25°C, IF = 350mA, the relative luminous ux ratio is 180%
in the chart below. A 36‑V CMA1306 LED that measures 1001lm during binning will deliver 1802lm (1001 * 1.8) at steady‑state operation
of Tc=25°C, IF = 350mA.
TYPICAL SPATIAL DISTRIBUTION
0%
30%
60%
90%
120%
150%
180%
210%
240%
270%
100 150 200 250 300 350 400 450 500 550 600
Relative Luminous Flux
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
36 V
Far Field
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLAMP® CMA1306 LED
EASYWHITE® PERFORMANCE GROUPS - CHROMATICITY (TJ = 85°C)
XLamp CMA1306 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
EasyWhite Color Temperatures – 2-Step
Code CCT x y
40H 4000 K
0.3777 0.3739
0.3797 0.3816
0.3861 0.3855
0.3838 0.3777
35H 3500 K
0.4022 0.3858
0.4053 0.3942
0.4125 0.3977
0.4091 0.3891
30H 3000 K
0.4287 0.3975
0.4328 0.4064
0.4390 0.4086
0.4347 0.3996
27H 2700 K
0.4524 0.4048
0.4574 0.4140
0.4633 0.4154
0.4581 0.4062
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
57G 5700K 0.3287 0.3417 0.00738 0.00360 72.0
50G 5000K 0.3447 0.3553 0.00840 0.00312 65.0
40G 4000K 0.3818 0.3797 0.00939 0.00402 53.7
35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0
30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2
27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5
EasyWhite Color Temperatures – 5-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
65E 6500K 0.3123 0.3282 0.01110 0.00550 61.0
57E 5700K 0.3287 0.3417 0.01230 0.00600 72.0
50E 5000K 0.3447 0.3553 0.01400 0.00520 65.0
40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7
30E 3000K 0.4338 0.4030 0.01390 0.00680 53.2
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLAMP® CMA1306 LED
PREMIUM COLOR PERFORMANCE GROUPS - CHROMATICITY (TJ = 85°C)
XLamp CMA1306 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
Fidelity
EasyWhite Color Temperatures – 2-Step
Code CCT x y
L5A 4000K
0.3764 0.3711
0.3784 0.3787
0.3847 0.3826
0.3825 0.3748
35H 3500K
0.4022 0.3858
0.4053 0.3942
0.4125 0.3977
0.4091 0.3891
30H 3000K
0.4287 0.3975
0.4328 0.4064
0.4390 0.4086
0.4347 0.3996
27H 2700K
0.4524 0.4048
0.4574 0.4140
0.4633 0.4154
0.4581 0.4062
Specialty
EasyWhite Color Temperatures – 2-Step
Code CCT x y
L7B 3000K
0.4263 0.3848
0.4296 0.3916
0.4361 0.3938
0.4326 0.3868
L7C 3000K
0.4192 0.3754
0.4224 0.3823
0.4291 0.3847
0.4257 0.3777
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
31Q 3100K 0.4236 0.3888 0.00848 0.00455 50.3
30Q 3000K 0.4305 0.3935 0.00834 0.00408 53.2
30U 3000K 0.4274 0.3837 0.00834 0.00408 53.2
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLAMP® CMA1306 LED
CREE EASYWHITE® BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C)
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
5700 K
6500 K
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
CCy
CCx
ANSI C78.377 Quadrangle
EasyWhite 5-step
EasyWhite 3-step
EasyWhite 2-step
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
XLAMP® CMA1306 LED
CREE PREMIUM COLOR BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C)
Fidelity (2-step)
2700K
3000K
3500K
4000K
4500K
L5A
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
CCy
CCx
ANSI C78.377 Quadrangle
35H
30H
27H
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
XLAMP® CMA1306 LED
CREE PREMIUM COLOR BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85°C) - CONTINUED
Speciality (2-step)
Speciality (3-step)
3000 K
3500 K
L7B
L7C
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.41
0.42
0.43
0.44
0.45
0.46
CCy
CCx
ANSI C78.377 Quadrangle
3000K
3500K
30Q
30U
31Q
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.41
0.42
0.43
0.44
0.45
0.46
CCy
CCx
ANSI C78.377 Quadrangle
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
30
XLAMP® CMA1306 LED
BIN AND ORDER CODE FORMATS
Bin codes and order codes are congured as follows:
Order Code Bin Code
SSSSSCC-HHHH-HHEGGRNNNNN
Series = CMA13
Internal code
Version
0 = Standard
P = eTone
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Z = 95 CRI minimum
Kit code
Vf class
C0 - 9-V class
F0 = 18-V class
N0 = 36-V class
Performance class
SSSSSCC-WWW-FF-GGR-EAAAA
Series = CMA13
Chromaticity bin
Vf class
C0 - 9-V class
F0 = 18-V class
N0 = 36-V class
Version
0 = Standard
P = eTone
Internal code
CRI Specification
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Z = 95 CRI minimum
Flux bin
0A = Not binned int
o flux bins
Performance class
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
31
XLAMP® CMA1306 LED
MECHANICAL DIMENSIONS
Dimensions are in mm.
Tolerances unless otherwise specied: ±.13
x° ± 1°
M1306C = 9-V CMA1306
M1306Ce = 9-V CMA1306 eTone
M1306F = 18‑V CMA1306
M1306Fe = 18‑V CMA1306 eTone
M1306N = 36-V CMA1306
M1306Ne = 36-V CMA1306 eTone
Tc measurement point: either the anode or cathode solder pad
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X .5
.XXX .25
.XX .75
.X 1.5
FOR SHEET METAL PARTS ONLY
.XX
.25
.XXX .125
X .5
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
6.0
0.2
7.5
0.2
R2.00
13.35
±0.2
13.35
±0.2
5.45
2.85
5.45
2.85
R.50
5.45
2.85
2.85
5.45
R.50
.55±.1
1.15±.15
1/28.000
B
2500-00835
CMA1306 MARKETING SPEC
08/1/18D. CRONIN
REVISONS
REV DESCRIPTION BY DATEAPP'D
B 13.35 WAS 13.50 DC 1/31/19
ALL DIMENSIONS ARE .13MM UNLESS OTHERWISE NOTED
Marking 1
M1306: product family (CMA1306)
N:36V Voltage Class
OPTICAL REFERENCE
OPTICAL
REFERENCE
Lorem ipsum
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
32
XLAMP® CMA1306 LED
THERMAL DESIGN
The CMA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction
temperatures (TJ). Cree has intentionally removed junction‑temperature‑based operating limits and replaced the commonplace maximum
TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to
ensure that the CMA LED is being operated within its designed limits. LES temperature measurement provides additional verication of
good thermal design. Please refer to page 4 for the Operating Limit specications.
There is no need to calculate for TJ inside the package, as the thermal management design process, specically from solder point (TSP) to
ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please
refer to the Thermal Management application note. For CMA soldering recommendations and information on thermal interface materials
(TIM), LES temperature measurement, and connection methods, please refer to the Cree XLamp CM Family LEDs soldering and handling
document.
To keep the CMA1306 LED at or below the maximum rated Tc, the case to ambient temperature
thermal resistance (R_c‑a) must be at or below the maximum R_c‑a value shown on the following
graphs, depending on the operating environment. The y-axis in each graph is a base 10 logarithmic
scale.
As the gure at right shows, the R_c‑a value is the sum of the thermal resistance of the TIM (R_tim)
plus the thermal resistance of the heat sink (R_hs).
R_j-c
Tc
R_tim
R_hs
Ta
R_j-c
Tc
R_c-a
Ta
CMA1306 - 9 V
0.01
0.10
1.00
10.00
100.00
400 600 800 1000 1200 1400 1600 1800 2000 2200 2400
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
9 V
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
33
XLAMP® CMA1306 LED
THERMAL DESIGN - CONTINUED
CMA1306 - 18 V
0.01
0.10
1.00
10.00
100.00
200 300 400 500 600 700 800 900 1000 1100 1200
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
18 V
CMA1306 - 36 V
0.01
0.10
1.00
10.00
100.00
100 150 200 250 300 350 400 450 500 550 600
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
36 V
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
34
XLAMP® CMA1306 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.
Pre-Release Qualication Testing
Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long‑term reliability for XLamp
LEDs and details of Cree’s pre‑release qualication testing for XLamp LEDs. Cree did not perform Room Temperature Operating Life
(RTOL) testing on the CMA1306 LED.
Lumen Maintenance
Cree now uses standardized IES LM‑80‑08 and TM‑21‑11 methods for collecting long‑term data and extrapolating LED lumen maintenance.
For information on the specic LM‑80 data sets available for this LED, refer to the public LM‑80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2018-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks and eTone™
is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
35
XLAMP® CMA1306 LED
PACKAGING
Cree CMA1306 LEDs are packaged in trays of 20. Five trays are sealed in an anti‑static bag and placed inside a carton, for a total of 100
LEDs per carton. Each carton contains 100 LEDs from the same performance bin.
Dimensions are in inches.
Tolerances: ±.13
x° ±1°
PATENT LABEL IS LOCATED
ON UNDERSIDE OF CARTON
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
BAG
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
PATENT LABEL IS LOCATED
ON UNDERSIDE OF COVER
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
BAG
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
LABEL WITH CREE BIN
CODE, QUANTITY, LOT #
PATENT LABEL IS LOCATED
ON UNDERSIDE OF COVER
UNLESS OTHERWISE NOTED ALL
TOLERANCES ARE AS FOLLOWS:
PART DRAWING
DWG.TITLE
SIZE
B
DO NOT
SCALE DWG.
FRACT ±1/64 X.X" ±.030 X.0mm ±.75mm
ANGLES ±0°-30' X.XX" ±.015 X.Xmm ±.30mm
DRAFT ±1° X.XXX" ±.005 X.XXmm ±.10mm
THIS DRAWING CONTAINS PROPRIETARY DESIGN INFORMATION
AND REMAINS ALONG WITH THE PRODUCT OR PRODUCTS
REPRESENTED HEREIN THE PROPERTY OF TEK PAK, INCORPORATED.
THIS DOCUMENT AND THE INFORMATION IT CONTAINS
MAY NOT BE COPIED, TRANSMITTED, OR USED BY ANY
THIRD PARTY WITHOUT THE EXPRESS WRITTEN APPROVAL
OF TEK PAK, INCORPORATED.
.58
5.875
5.875
R.375
.562
.875
.875
SCALE: 1.000
DWG. NO.
022490-00
SHEET 2 OF 2
DATE:
4-3-13
DR. BY:
KJS
CHK. BY:
REV DESC. DATE BY CHK.
SECTION C-C
.38