UL (60950-1) reinforced insulation compliant Compact high capacity, (25A max) Slim heat sink combined type added New Slim heat sink combined type Compliance with RoHS Directive AQ-J RELAYS FEATURES TYPICAL APPLICATIONS 1. Compact Size Approx 40% reduction in required space achieved in the footprint area compared with the previous model (AQ-R relay) 2. Built-in varistor 3. Reverse input connection prevention function 4. Labor Saving (tab terminal) 5. Heat sink combined types ready to mount on DIN rail added (Radiating grease and screws assembly process not needed) 6. Output arrangement 1a and 1a x 2 available in the heat sink combined type 1. Kitchen appliances 2. Vending machine 3. Injection molding machine 4. Packing machine 5. Amusement machine Note: * International standards are acquired for AQ-J SSR stand-alone, not applied to heat sink combined type. ORDERING INFORMATION AQJ AQ-J Solid State Relays Output type 1: 10A, 75V to 264V AC 2: 15A, 75V to 264V AC 4: 25A, 75V to 264V AC Terminal 1: Plug-in terminal, Zero-cross 2: Plug-in terminal, Random* Input voltage 2: 4 to 6 V DC 6: 18 to 28 V DC 9: 10 to 18 V DC Functions V: Built-in varistor Slim heat sink combined type None: Without a heat sink Y: 1a type W: 1a x 2 type Note: * Random type is available by custom order. TYPES 1. AQ-J Solid State Relays Type Load current Load voltage 10A Zero-cross* 15A 25A AQ-J 75V to 264V AC Input voltage 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC Standard Packing; carton: 10 pcs., case: 200 pcs. Note: * Random type also available. Please inquire. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Part No. AQJ112V AQJ119V AQJ116V AQJ212V AQJ219V AQJ216V AQJ412V AQJ419V AQJ416V AQ-J 2. AQ-J SSR Slim Heat Sink Combined Type Output configuration Type Load current Load voltage Input voltage 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 10A 1a 20A Zero-cross* 75V to 264V AC 10A (per 1a) 1a x 2 15A (per 1a) Part No. AQJ112VY AQJ119VY AQJ116VY AQJ412VY AQJ419VY AQJ416VY AQJ112VW AQJ119VW AQJ116VW AQJ412VW AQJ419VW AQJ416VW Standard Packing; no carton, case: 10 pcs. Note: * Random type also available. Please inquire. 3. Accessories Type Slim heat sink (28mm wide) (Mountable on a DIN rail) Slim heat sink (45mm wide) (Mountable on a DIN rail) Standard heat sink (10A and 15A) Standard heat sink (25A only) DIN rail mounting plate Part No. AQP-HS-SJ10A AQP-HS-SJ20A AQP-HS-J10A AQP-HS-J25A AQP-DPJ Packaged quantity No carton, 10 in a case No carton, 8 in a case 5 in a carton, 20 in a case No carton, 5 in a case 5 in a carton, 50 in a case SPECIFICATIONS 1. Ratings (Test sample: AQ-J stand-alone, Measurement condition: at 20C 68F, input ripple: 1% or less) 1) Input side Part No. AQJ112V AQJ212V AQJ412V 5V DC 4 to 6V DC Approx. 0.26k AQJ119V AQJ219V AQJ419V 12V DC 10 to 18V DC Approx. 0.8k Min. 1V DC AQJ116V AQJ216V AQJ416V 24V DC 18 to 28V DC Approx. 1.6k Part No. AQJ112V AQJ119V AQJ116V 10A AQJ212V AQJ219V AQJ216V 15A 75 to 264V AC 45Hz to 65Hz 150A Max. 5mA Max. 1.6V 50mA AQJ412V AQJ419V AQJ416V 25A Item Rated voltage Input voltage Input impedance Drop-out voltage 2) Output side Item Max. load current*1 Load voltage Frequency Non-repetitive surge current Max. "OFF-state" leakage current Max. "ON-state" voltage drop Min. load current*2 100A 250A Notes: *1 Refer to REFERENCE DATA "1. Load current vs. ambient temperature" . *2 When the load current is less than the rated minimum load current, please refer to "Cautions for Use of SSR". 2. Ratings (Test sample: AQ-J slim heat sink combined type, Measurement condition: at 20C 68F, input ripple: 1 % or less) 1) Input side Part No. Item Rated voltage Input voltage Input impedance Drop-out voltage AQJ112V(Y*W) AQJ412V(Y*W) 5V DC 4 to 6V DC Approx. 0.26k AQJ119V(Y*W) AQJ419V(Y*W) 12V DC 10 to 18V DC Approx. 0.8k Min. 1V DC AQJ116V(Y*W) AQJ416V(Y*W) 24V DC 18 to 28V DC Approx. 1.6k 2) Output side Part No. Item Output arrangement Max. load current*1 Load voltage Frequency Non-repetitive surge current Max. "OFF-state" leakage current Max. "ON-state" voltage drop Min. load current*2 AQJ112VY AQJ119VY AQJ116VY AQJ412VY AQJ419VY AQJ416VY AQJ112VW AQJ119VW AQJ116VW 20A 10A 15A 100A 250A 1a x 2 1a 10A AQJ412VW AQJ419VW AQJ416VW 75 to 264V AC 45Hz to 65Hz 100A 250A Max. 5mA Max. 1.6V 50mA Notes: *1 Refer to REFERENCE DATA "1. Load current vs. ambient temperature" . *2 When the load current is less than the rated minimum load current, please refer to "Cautions for Use of SSR". All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AQ-J 3. Characteristics (Measurement condition: at 20C 68F, input ripple: 1% or less) Item Operate time, max. Release time, max. Insulation resistance, min. Characteristics 1/2 cycle of voltage sine wave + 1ms 1/2 cycle of voltage sine wave + 1ms 100M between input, output and case 3,000 Vrms between input and output 2,500 Vrms between input, output and case SSR stand-alone: 10 to 55Hz, double amplitude of 1.5mm Slim heat sink combined type: 10 to 55Hz, double amplitude of 0.75mm SSR stand-alone: Min. 980m/s2 Slim heat sink combined type: Min. 197m/s2 -30 to +80C -22 to +176F -30 to +100C -22 to +212F Zero-cross (Turn ON and Turn OFF) Breakdown voltage Vibration resistance Shock resistance Ambient temperature Storage temperature Operational method Remarks at 500 V DC for 1min. X, Y, Z axes X, Y, Z axes Non-condensing at low temperatures REFERENCE DATA (1) AQ-J Solid State Relays 1. Load current vs. ambient temperature Use load current within range specified in the figure below 0 10 When two units are mounted on an (A) slim heat sink When two units are mounted on an (B) slim heat sink 0 20 40 60 80 Ambient temperature, C 2. Non-repetitive surge current vs. carrying time 25 When using 100 x 100 x t1.6 mm iron plate 200 15A type 10A type 100 Input current, mA Non-repetitive surge current, A 30 25A type 20 (10 to 18V DC) (18 to 28V DC) 15 10 5 0 1 10 No. of cycles at 60 Hz 100 0 5 10 15 20 25 Input voltage, V 30 60 80 When a single unit is mounted on an (C) standard heat sink 15 When a single unit is mounted on an (B) slim heat sink 10 When two units are mounted on an (A) slim heat sink When two units are mounted on an (B) slim heat sink When using as stand-alone When using an (D) DIN rail mounting plate (10A, 15A and 25A common) (4 to 6V DC) 40 When a single unit is mounted on an (A) slim heat sink 20 0 20 40 60 80 Ambient temperature, C 25 When a single unit is mounted on an (E) standard heat sink 5 3. Input current vs. input voltage characteristics 300 20 (3)-2. 25 A type (when using a heat sink) When using 150 x 150 x t1.6 mm iron plate 0 0 Ambient temperature, C 15 0 -20 100 When using 150 x 150 x t1.6 mm iron plate 0 -20 100 When using 250 x 250 x t2 mm iron plate When using 200 x 200 x t2 mm iron plate 20 5 40 60 80 Ambient temperature, C When using 9 100 x 100 x t1.6 mm iron plate 30 10 When using as stand-alone When using an (D) DIN rail mounting plate 12 3 When using 300 x 300 x t2 mm iron plate 5 20 Load current, A When using as stand-alone When using an (D) DIN rail mounting plate 30 25 When using 200 x 200 x t2 mm iron plate 6 (3)-1. 25 A type (when using iron plate) Load current, A Load current, A 4 When a single unit is mounted When a single unit is mounted on an on an (C) standard heat sink When a single unit is mounted (A) slim heat sink on an (B) slim heat sink 0 15 When two units are mounted on an (A) slim heat sink 8 When a single unit is mounted on an (C) standard heat sink When two units are mounted 6 on an (B) slim heat sink When using 100x100xt1.6 mm iron plate 2 15 0 18 When a single unit is mounted on an (A) slim heat sink When a single unit is mounted on an (B) slim heat sink 10 AQP-HS-SJ20A AQP-HS-SJ10A AQP-HS-J10A AQP-DPJ AQP-HS-J25A (2)-2. 15 A type (when using a heat sink) 20 12 (2)-1. 15 A type (when using iron plate) Load current, A (A) slim heat sink (B) slim heat sink (C) standard heat sink (D) DIN rail mounting plate (E) standard heat sink (1) 10 A type (when using heat sink or iron plate) Load current, A Tested condition: 1) If attached to a heat sink, use a heat conductive compound (Ex. Toshiba sillicone YG6111 or TSK5303) of similar coating to improve cooling 2) Without external heat sink If the mounting surface is not metallic and a heat sink is not used, expose the bottom surface and plate surface to improve heat dissipation. 3) The current value is per 1a. 35 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 0 20 40 60 80 Ambient temperature, C 100 AQ-J (2) AQ-J SSR Slim Heat Sink Combined Type 1. Load current vs. ambient temperature Use load current within range specified in the figure below (2) Output arrangement: 1a x 2 (1) Output arrangement: 1a Load current, A 20 Load current, A (Per 1a) 20 25 AQJ41VY 15 10 15 AQJ41VW 10 AQJ11VW AQJ11VY 5 5 0 0 20 40 60 80 Ambient temperature, C 0 100 2. Surge current vs. carrying time 0 20 40 60 80 Ambient temperature, C 100 Note: When two contacts are operated simultaneously. In the case of a single-contact operation, the rating of (1) AQJ11VY, AQJ41VY applies. 3. Input current vs. input voltage characteristics 30 500 AQJ12V AQJ19V Input current, mA Surge current, A 400 300 200 24 AQJ16V 18 12 AQJ41V 100 6 AQJ11V 0 1 10 No. of cycles at 60 Hz 0 100 DIMENSIONS (mm inch) 0 5 10 15 20 Input voltage, V The CAD data of the products with a 1. AQ-J Stand Alone CAD Data 25 30 mark can be downloaded from: http://panasonic-electric-works.net/ac External dimensions CAD Data 30 max. 7.95 1.181 max. .313 4.55 .179 4.3 .169 Schematic Input power source 3 1 4 2 + - Load 8.4 6.35 .331 .250 38 1.496 4.3 dia. .169 dia. 30 1.181 2-1.65 dia. 2-.065 dia. 5.5 2.8 .217 .110 1.6 .063 28 1.102 Mounting dimensions 2-1.2 dia. 2-.047 dia. 7.1 .280 Output side 1 and 2 terminals: #250 type, t = 0.8 .031 Input side 3 and 4 terminals: #110 type, t = 0.5 .020 17 .669 5 .197 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 30 +0.2 -0.1 1.181 +.008 -.004 2-4.3 dia. or M4 2-.169 dia. or M4 Load power source AQ-J 2.-(1) Slim Heat Sink Combined Type Output Arrangement: 1a External dimensions Schematic 100 3.937 90 3.543 78 3.071 CAD Data Input power source + - 6 .236 3 1 4 2 Load Load power source 28 1.102 4.6 dia. 4.6x5.6 elliptical hole .181x.220 .181 dia. Mounting dimensions (Top view) 83 3.268 2-4.6 dia. or M4 2-.181 dia. or M4 Max. 113 4.449 6 .236 100 3.937 1.6 .063 Note: When using on a DIN rail, please install so that the "A" part is on top. AQP810 900.2 3.543.008 70707 "A" part 2.-(2) Slim Heat Sink Combined Type Output Arrangement: 1a x 2 External dimensions 100 3.937 90 3.543 78 3.071 CAD Data 6 .236 28 1.102 4.6 dia. 4.6x5.6 elliptical hole .181 dia. .181x.220 Schematic Input power source + - 3 1 4 2 Load Load power source Note: Use caution for AQ-J terminal numbers. Mounting dimensions (Top view) 83 3.268 2-4.6 dia. or M4 2-.181 dia. or M4 Max. 113 4.449 100 3.937 1.6 .063 Note: When using on a DIN rail, please install so that the "A" part is on top. AQP810 6 .236 900.2 3.543.008 70707 "A" part ACCESSORIES AQP-HS-SJ10A Slim Heat Sink External dimensions 100 3.937 90 3.543 78 3.071 30 1.181 CAD Data 4.6 dia. .181 dia. Mounting dimensions (Top view) 2-4.6 dia. or M4 2-.181 dia. or M4 5-M4 (Effective screw depth: 6mm .236inch) 6 .236 6 .236 4.6x5.6 elliptical hole 28 .181x.220 1.102 30 30 1.181 10 1.181 .394 900.2 3.543.008 78 3.071 83 3.268 1.6 .063 Note: When using on a DIN rail, please install so that the "A" part is on top. AQP810 70707 "A" part AQP-HS-SJ20A Slim Heat Sink External dimensions 100 90 78 40 CAD Data 3.937 3.543 3.071 1.575 Mounting dimensions (Top view) 2-4.6 dia. or M4 2-.181 dia. or M4 5-M4 (Effective screw depth: 6mm .236inch) 30 6 .236 1.181 4.6 dia. .181 dia. 47.6 1.874 30 1.181 4.6x5.6 elliptical hole .181x.220 45 1.772 78 3.071 83 3.268 1.6 .063 Note: When using on a DIN rail, please install so that the "A" part is on top. AQP812 70707 "A" part All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 6 .236 900.2 3.543.008 AQ-J AQP-HS-J10A Standard Heat Sink (for 10A and 15A types) CAD Data 4.4 .173 External dimensions 50 1.969 4.4 .173 R2.2 R.087 Mounting dimensions 4-M4 or 4.4 dia. 4-M4 or .173 dia. 2 .079 1.5 .059 3-M4 33.3 80 100+0.5 -1.5 1.311 3.150 3.937 +.020 -.059 54 2.126 90 3.543 900.1 3.543.004 11.1 .437 2 .079 30 1.181 47.6 1.874 100 3.937 9 .354 AQP-HS-J25A Standard Heat Sink (for 25A type) 1.5 .059 24.5 .965 28.5 1.122 45 1.772 500.2 1.969.008 External dimensions Mounting dimensions 4-R2.5 .098 4-M4.5 or 5 dia. 4-M4.5 or .197 dia. CAD Data 3- M 4 5 .197 119 4.685 47.5 150 1.870 5.906 30 1.181 1190.1 4.685.004 132 5.197 1320.1 5.197.004 7 .276 2 .079 52 2.047 3 .118 46 1.811 64 2.520 82 3.228 100 3.937 120 4.724 142 5.591 AQP-DPJ DIN Rail Mounting Plate 13 .512 External dimensions CAD Data 4.6 dia. .181 dia. 1.6 .063 3-M4 47.6 1.874 30 90 3.543 1.181 19 .748 4.6x5.6 elliptical hole .181x.220 12.1 .476 16.5 .650 100 3.937 6 15 .236 .591 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AQ-J Mounting rail Fastening plate CAD Data CAD Data 1,000 39.37 12 .472 50 M4 1.969 5.5 .217 5 .197 15 10 15 .591 .394 .591 2.75R 15 10 15 .108R .591 .394 .591 35 1.378 24 1.5 5 .945 .059 .197 AT8-DLA1 ATA4806 ATA4806 UP 7.5 .295 40-5.5x15 slot 40-.217x.591 slot 10 .394 27 1.063 NOTES 1. Part number indication The AQ-J slim heat sink combined type is a product combining the AQ-J SSR and AQ-J SSR heat sinks. The part numbers are indicated on each AQ-J SSR and heat sink. Ex) In the case of AQJ112VY Part number of AQ-J SSR: AQJ112V Part number of the heat sink: AQP810* When using these parts, please refer to REFERENCE DATA, "1. Load current vs. ambient temperature". Note: * The Japanese part number is printed on the following accessories in stead of Global part number. Please refer to the below chart for interpretation from Japanese to Global part number. Products Slim heat sink (28 mm) Slim heat sink (45 mm) Standard heat sink (10A and 15A) Standard heat sink (25A and 40A) Standard heat sink (AQ-N 25A) DIN Rail Mounting Plate (for AQ-J) DIN Rail Mounting Plate (for AQ-N) Mounting Rail Terminal Cover (for AQ-N) Japanese Part No. Global Part No. AQP810 AQP-HS-SJ10A AQP812 AQP-HS-SJ20A AQP811 AQP-HS-J10A AQP808 AQP-HS-J25A AQP804 AQP-HS-30/40A AQP809 AQP-DPJ AQP803 AQP-DP ATA48011 AT8-DLA1 AQP807 AQP-NPC Recommended Temperature Controllers <KT4H Temperature Controller> Our temperature controller is recommended for use with our Solid State Relays. Features * Data can be collected using the RS485 communications interface via a PLC. * Improved visibility using a negative type LCD and backlight. * Depth-wise length (chassis dimension) is 56 mm 2.205 inch. 48mm 1.890inch 56mm 2.205inch Substitute part numbers Power supply 100 to 240 V AC 48mm 1.890inch Control output Relay contact Part No. AKT4H111100 *For detailed product information about temperature controllers, please refer to our website: http://panasonic-denko.co.jp/ac/e/fasys/component/temperature_controller/ For Cautions for Use. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 10 .394 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: AQP812 AQP-HS-J10A AQP-HS-SJ20A