www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.027/06/14
SGD Series
Description:
Suited for IP67 (wet) environments, the SGD provides a userselectable 4 to 20mA or
0 to 10V DC absolute linear position signal over an 80-inch or 120-inch full stroke range
option. Signal selection is simply made by connecting the appropriate pins on the
included connector or selecting the proper wires in the optional cordset. Additionally,
this sensor is constructed with a rugged polycarbonate body, an extremely durable
spring-loaded stainless steel measuring cable and a mounting bracket that lets the
customer mount this sensor in just about any direction.
Speciacations:
Stroke Range : 80 inches (2,032 mm), 120 inches (3,048mm)
User Selectable Output Signal : 4 to 20mA (2-wire) / 0 to 10V DC
Input Voltage, 4 to 20mA option : 8 to 40V DC
Input Voltage, 0 to 10V DC option : 12 to 32V DC
Accuracy : 0.35% FS.
Repeatability : 0.05% FS.
Resolution :EssentiallyInnite
Measuring Cable : 0.019-inch dia. nylon-coated stainless steel
Maximum Acceleration : 10g
Measuring Cable Tension : 9oz. (2,5 N) ±30%
Sensor : Plastic-hybrid precision potentiometer
CycleLife :≥250,000
Electrical Connection : M12 connector (mating plug included)
Enclosure :Glass-lledpolycarbonate
Environmental : IP 67
Operating Temperature : 0°F to 160°F (-18°C to 70°C)
Weight, 80-inch (not including bracket) : 0.6 lbs. (272g)
Weight, 120-inch (not including bracket) : 1 lb. (453 g)
Ordering Information:
Part Number Decription
SGD-80-3 80-inch stroke range, 4 to 20mA / 0 to 10V DC output M12
connector, IP67 environments, mounting bracket included
SGD-120-3 120-inch stroke range, 4 to 20mA / 0 to 10V DC output M12
connector, IP67 environments, mounting bracket included
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.027/06/14
SGD Series
Output Signal:
Output Signal* 0% fs. 100% fs.
4 to 20mA 4 – 4.25mA 19.2 – 20mA
0 to 10V DC 0 – 0.2V DC 9.5 – 10V DC
*Note: signal endpoints are set at the time of manufacture and cannot be adjusted
Signal Endpoint Tolerances
Dimensions:
Electrical Connection:
0 to 10V DC 4 to 20mA Pin Pin - Colour Code
12 to 32V DC 8 to 40V DC 1 1 - Brown
0 to 10V DC n/c 2 2 - White
n/c n/c 3 3 - Blue
Common 4 to 20mA 4 4 - Black
Output Signals
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.027/06/14
SGD Series
Mounting Options (SGD-80-3):
Mounting Options (SGD-120-3):
Dimensions : Inches (Millimetres)
Dimensions : Inches (Millimetres)
SGD-80-3 w/ Mounting Bracket:
Dimensions : Inches (Millimetres)
* tolerance = +.005 –.001 [+.13 –.03]
** tolerance = +.005 –.005 [+.13 –.13]
www.element14.com
www.farnell.com
www.newark.com
Page <4> V1.027/06/14
SGD Series
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Part Number Table
Description Part Number
Cable Extension Transducer, 80" SGD-80-3
Cable Extension Transducer, 120" SGD-120-3
SGD-120-3 w/ Mounting Bracket:
Dimensions : Inches (Millimetres)
*tolerance = +.005 –.001 [+.13 –.03]
** tolerance = +.005 –.005 [+.13 –.13]
