SGD Series Description: Suited for IP67 (wet) environments, the SGD provides a userselectable 4 to 20mA or 0 to 10V DC absolute linear position signal over an 80-inch or 120-inch full stroke range option. Signal selection is simply made by connecting the appropriate pins on the included connector or selecting the proper wires in the optional cordset. Additionally, this sensor is constructed with a rugged polycarbonate body, an extremely durable spring-loaded stainless steel measuring cable and a mounting bracket that lets the customer mount this sensor in just about any direction. Speciafications: Stroke Range User Selectable Output Signal Input Voltage, 4 to 20mA option Input Voltage, 0 to 10V DC option Accuracy Repeatability Resolution Measuring Cable Maximum Acceleration Measuring Cable Tension Sensor Cycle Life Electrical Connection Enclosure Environmental Operating Temperature Weight, 80-inch (not including bracket) Weight, 120-inch (not including bracket) : 80 inches (2,032 mm), 120 inches (3,048mm) : 4 to 20mA (2-wire) / 0 to 10V DC : 8 to 40V DC : 12 to 32V DC : 0.35% FS. : 0.05% FS. : Essentially Infinite : 0.019-inch dia. nylon-coated stainless steel : 10g : 9oz. (2,5 N) 30% : Plastic-hybrid precision potentiometer : 250,000 : M12 connector (mating plug included) : Glass-filled polycarbonate : IP 67 : 0F to 160F (-18C to 70C) : 0.6 lbs. (272g) : 1 lb. (453 g) Ordering Information: Part Number Decription SGD-80-3 80-inch stroke range, 4 to 20mA / 0 to 10V DC output M12 connector, IP67 environments, mounting bracket included SGD-120-3 120-inch stroke range, 4 to 20mA / 0 to 10V DC output M12 connector, IP67 environments, mounting bracket included www.element14.com www.farnell.com www.newark.com Page <1> 27/06/14 V1.0 SGD Series Output Signal: Signal Endpoint Tolerances Output Signal* 0% fs. 100% fs. 4 to 20mA 4 - 4.25mA 19.2 - 20mA 0 to 10V DC 0 - 0.2V DC 9.5 - 10V DC *Note: signal endpoints are set at the time of manufacture and cannot be adjusted Electrical Connection: Output Signals 0 to 10V DC 4 to 20mA Pin Pin - Colour Code 12 to 32V DC 8 to 40V DC 1 1 - Brown 0 to 10V DC n/c 2 2 - White n/c n/c 3 3 - Blue Common 4 to 20mA 4 4 - Black Dimensions: www.element14.com www.farnell.com www.newark.com Page <2> 27/06/14 V1.0 SGD Series Mounting Options (SGD-80-3): Dimensions : Inches (Millimetres) Mounting Options (SGD-120-3): Dimensions : Inches (Millimetres) SGD-80-3 w/ Mounting Bracket: Dimensions : Inches (Millimetres) * tolerance = +.005 -.001 [+.13 -.03] ** tolerance = +.005 -.005 [+.13 -.13] www.element14.com www.farnell.com www.newark.com Page <3> 27/06/14 V1.0 SGD Series SGD-120-3 w/ Mounting Bracket: Dimensions : Inches (Millimetres) *tolerance = +.005 -.001 [+.13 -.03] ** tolerance = +.005 -.005 [+.13 -.13] Part Number Table Description Part Number Cable Extension Transducer, 80" SGD-80-3 Cable Extension Transducer, 120" SGD-120-3 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <4> 27/06/14 V1.0