TND315S Ordering number : ENA0421 SANYO Semiconductors DATA SHEET ExPD (Excellent Power Device) TND315S General Purpose Driver for PDP Sustain Pulse Drive, Motor Drive, Switching Power Supply, and DC / DC Converter Applications Features * * * * * * * * Dual buffer. Monolithic structure (High voltage CMOS process adopted). Withstand voltage of 25V is assured. Wide range of operating voltage : 4.5V to 25V. Peak output current : 1A. Fast switching time (30ns typical at 1000pF load). Fully compatible input to TTL / CMOS (VIH=up to 2.6V, at VDD=4.5 to 25V). Built-in input pull-down resistance. Specifications Absolute Maximum Ratings at Ta=25C Parameter Supply Voltage Symbol Conditions Ratings VDD Input Voltage Allowable Power Dissipation Unit 0 to 25 VIN PD max V GND--0.3 to VDD+0.3 V 0.3 W Junction Temperature Tj --55 to +150 C Storage Temperature Tstg --55 to +150 C Recommended Operating Conditions at Ta=25C Parameter Symbol Conditions Ratings Unit Operating Supply Voltage VDD 4.5 to 25 V Operating Temperature Topr --40 to +125 C Electrical Characteristics (AC Characteristics) at Ta=25C, VDD=18V, VIN=5V Parameter Turn-On Rise Time Turn-Off Fall Time Delay Time Symbol Conditions Ratings min typ Unit max tr tf CL=1000pF CL=1000pF 30 45 ns 30 45 ns tD1 tD2 CL=1000pF CL=1000pF 30 45 ns 45 60 ns Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before using any SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D0606IP TI IM TB-00001537 No. A0421-1/5 TND315S Electrical Characteristics (DC Characteristics) at Ta=25C, VDD=4.5 to 25V Parameter Symbol Logic "1" Input Voltage VIH Logic "0" Input Voltage VIL Logic "1" Input Bias Current Logic "0" Input Bias Current IIN+ IIN-- High Level Output Voltage VOH Low Level Output Voltage VOL VDD Supply Current Isupp Output High Short Circuit Pulse Current IO+ IO-- Output Low Short Circuit Pulse Current Output On Resistance ROUT Ratings Conditions min typ Unit max 2.6 VIN=VDD=25V V 40 VIN=0V or VDD --1 IO=0A IO=0A 0.8 V 100 A 1 A VDD--0.1 V VDD=10V, VIN=3V, (both inputs) 1.0 VDD=10V, VIN=0V, (both inputs) VDD=18V, PW10s, VOUT=0V 1.0 VDD=18V, PW10s, VOUT=18V 1.0 0.1 V 4.5 mA 0.2 mA A A VDD=18V, Iload=10mA, VOUT="H" 8 12 VDD=18V, Iload=10mA, VOUT="L" 6 10 Package Dimensions unit : mm (typ) 7005-007 5 1 4 1.27 0.2 1 : NC 2 : IN A 3 : GND 4 : IN B 5 : OUT B 6 : VDD 7 : OUT A 8 : NC 0.1 5.0 1.5 1.8 MAX 0.43 0.595 6.0 4.4 0.3 8 SANYO : SOP8 Block Diagram VDD IN OUT GND No. A0421-2/5 TND315S Switching Time Test Circuit VDD=18V 4.7F 0.1F TND315S INPUT A OUTPUT A 1000pF INPUT B OUTPUT B 1000pF INPUT RISE AND FALL +5V TIMES=5ns +0.4V INPUT 90% 10% tD1 +18V tD2 90% 90% NONINVERTING OUTPUT 10% 10% 0V tr tr -- Tc VDD=18V VIN=5V CL=1000pF 45 40 35 30 25 VIN=5V CL=1000pF 60 40 30 10 0 50 100 Case Temperature, Tc -- C 150 0 5 10 40 35 30 25 25 30 IT05629 VIN=5V CL=1000pF Turn-Off Fall Time, tf -- ns 45 20 tf -- VDD 60 VDD=18V VIN=5V CL=1000pF 15 Supply Voltage, VDD -- V IT05628 tf -- Tc 50 Turn-Off Fall Time, tf -- ns 50 20 20 15 --50 tr -- VDD 70 Turn-On Rise Time, tr -- ns 50 Turn-On Rise Time, tr -- ns tf 50 40 30 20 20 15 --50 10 0 50 100 Case Temperature, Tc -- C 150 IT05630 0 5 10 15 20 Supply Voltage, VDD -- V 25 30 IT05631 No. A0421-3/5 TND315S tD1 -- Tc 50 VDD=18V VIN=5V CL=1000pF 40 VIN=5V CL=1000pF 45 Delay Time, tD1 -- ns Delay Time, tD1 -- ns 45 35 30 25 20 tD1 -- VDD 50 40 35 30 25 15 10 --50 20 0 50 100 150 Case Temperature, Tc -- C 70 60 50 40 30 15 20 25 30 IT05633 tD2 -- VDD VIN=5V CL=1000pF 140 Delay Time, tD2 -- ns 80 10 160 VDD=18V VIN=5V CL=1000pF 90 5 Supply Voltage, VDD -- V tD2 -- Tc 100 Delay Time, tD2 -- ns 0 IT05632 120 100 80 60 40 20 20 10 0 --50 0 0 50 100 150 Case Temperature, Tc -- C Output "Low" Short Circuit Pulse Current, IO(--) -- A 1.0 0.8 0.6 50 100 Case Temperature, Tc -- C 2.0 1.5 1.0 0.5 25 30 IT08459 1.2 1.0 0.8 0.6 0 50 100 Case Temperature, Tc -- C 150 IT05637 PD -- Ta 0.40 VIN=5V CL=10F 20 VDD=18V IT05636 IO() -- VDD 2.5 15 IO(--) -- Tc 0.4 --50 150 Allowable Power Dissipation, PD -- W Output "High" Short Circuit Pulse Current, IO(+) -- A 1.2 0 10 1.4 VDD=18V 0.4 --50 5 Supply Voltage, VDD -- V IO(+) -- Tc 1.4 Output "High / Low" Short Circuit Pulse Current, IO() -- A 0 IT05634 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 0 0 5 10 15 20 Supply Voltage, VDD -- V 25 30 IT11084 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT03760 No. A0421-4/5 TND315S Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2006. Specifications and information herein are subject to change without notice. PS No. A0421-5/5