1812CHIP INDUCTORS Aerospace Grade Chip Inductors AE450RAA Higher SRF values than 1812 size parts with ferrite cores 5% tolerances for all values 19 inductance values from 1.0 to 33 H Part number1 AE450RAA102JSZ AE450RAA122JSZ AE450RAA152_SZ AE450RAA182JSZ AE450RAA222JSZ AE450RAA272JSZ AE450RAA332JSZ AE450RAA392_SZ AE450RAA472JSZ AE450RAA562JSZ AE450RAA682JSZ AE450RAA822JSZ AE450RAA103JSZ AE450RAA123JSZ AE450RAA153JSZ AE450RAA183JSZ AE450RAA223_SZ AE450RAA273JSZ AE450RAA333_SZ Inductance2 (H) 1.0 @ 7.9 MHz 1.2 @ 7.9 MHz 1.5 @ 7.9 MHz 1.8 @ 7.9 MHz 2.2 @ 7.9 MHz 2.7 @ 7.9 MHz 3.3 @ 7.9 MHz 3.9 @ 7.9 MHz 4.7 @ 7.9 MHz 5.6 @ 7.9 MHz 6.8 @ 7.9 MHz 8.2 @ 7.9 MHz 10.0 @ 7.9 MHz 12.0 @ 2.5 MHz 15.0 @ 2.5 MHz 18.0 @ 2.5 MHz 22.0 @ 2.5 MHz 27.0 @ 2.5 MHz 33.0 @ 2.5 MHz Percent tolerance 5 5 5,2 5 5 5 5 5,2 5 5 5 5 5 5 5 5 5,2 5 5,2 1. When ordering, please specify tolerance and testing codes: AE450RAA333JSZ Tolerance: G = 2% J = 5% Testing: Z = Coilcraft Critical Products Environmental Stress Conditions Testing. H = Coilcraft Qual + Coilcraft Hi-Rel Burn-in P = Coilcraft Qual + MIL-STD-981 Class S Group A screening N = Coilcraft Qual + MIL-STD-981 Class B Group A screening C = Coilcraft Qual + MIL-STD-981 Class S Group A screening + MIL-STD-981 Class S Group B qualification W = Coilcraft Qual + MIL-STD-981 Class B Group A screening + MIL-STD-981 Class S Group B qualification 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 5. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF859 test fixture. 6. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. (R) Q min3 59 @ 50 MHz 54 @ 50 MHz 57 @ 50 MHz 57 @ 50 MHz 52 @ 50 MHz 53 @ 50 MHz 53 @ 50 MHz 53 @ 50 MHz 32 @ 10 MHz 32 @ 10 MHz 32 @ 10 MHz 32 @ 10 MHz 32 @ 10 MHz 26 @ 5 MHz 26 @ 5 MHz 28 @ 5 MHz 28 @ 5 MHz 28 @ 5 MHz 24 @ 2.5 MHz SRF min4 (MHz) 260 230 210 190 170 160 145 130 115 100 90 80 70 60 50 40 40 30 20 DCR max5 (Ohms) 1.1 1.2 1.6 2.0 2.2 3.2 3.8 5.0 5.4 5.7 6.6 7.0 7.7 8.7 9.6 10.5 11.5 12.5 13.5 Imax (mA) 530 480 430 380 340 300 270 240 230 220 210 200 190 180 170 155 155 150 145 Core material Ceramic Terminations Tin-lead (63/37) over silver-platinum-glass frit Ambient temperature -55C to +125C with Imax current, +125C to +155C with derated current Storage temperature Component: -55C to +155C. Packaging: -55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Enhanced crush-resistant packaging 600 per 7 reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 3.7 mm pocket depth These parts are preproduction products for electrical evaluation only. Specification subject to change without notice. Document AE105-1 Revised 10/07/09 1102 Silver Lake Road Cary IL 60013 (c) Coilcraft, Inc. 2009 This robust version of Coilcraft's standard 1812CS series features high temperature materials that pass NASA low outgassing specifications and allow operation in ambient temperatures up to 155C. The leachresistant base metalization with tin-lead (Sn-Pb) terminations ensures the best possible board adhesion. Phone 800-981-0363 Fax 847-639-1508 E-mail cp@coilcraft.com Web www.coilcraft-cps.com 1812 CHIP INDUCTORS AE450RAA Series (1812) Typical Q vs Frequency Typical L vs Frequency 80 40 1.8 H 33.0 H 3.9 H 70 30 Q Factor 50 Inductance (H) 60 8.2 H 40 30 15.0 H 22.0 H 22.0 H 20 15.0 H 8.2 H 10 20 33.0 H 3.9 H 1.8 H 10 0 0 1 10 1 100 100 10 1000 Frequency (MHz) Frequency (MHz) Current Derating B overall H C 120 F I G J 110 A 90 F 80 I E terminal 70 D Terminal wraparound: approx 0.015/0,38 both ends 60 Suggested Land Pattern 50 40 25C Percent of rated Irms 100 30 20 10 0 A max B max C max D ref 0.195 0.150 0.135 0.070 0.100 0.025 0.128 0.120 0.045 0.118 4,95 3,81 1,78 2,54 3,43 E F 0,64 G 3,25 H 3,05 I 1,14 J 3,00 All dimensions are without solder applied to the terminations. For maximum dimensions with solder, add 0.006 inches / 0,152 mm. -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (C) (R) These parts are preproduction products for electrical evaluation only. Specification subject to change without notice. Document AE105-2 Revised 10/07/09 1102 Silver Lake Road Cary IL 60013 (c) Coilcraft, Inc. 2009 Phone 800-981-0363 Fax 847-639-1508 E-mail cp@coilcraft.com Web www.coilcraft-cps.com