http://www.tracopower.com Page 1 of 4
Industrial Power Supplies
TPC Series, 30 to 120 Watt
Features
◆ For industrial, office and residential
environments
◆ Meets European ErP directive (green mode),
<0.3 W no load power consumption
◆ High efficiency across full load range
◆ Compact plastic casing
◆ Reliable snap-on mounting on DIN-rails
or with wall mounting bracket (not included)
◆ Universal input 85–264 VAC, 47–63 Hz
◆ Models with 5, 12, 24 & 48 VDC output
◆ Output voltage adjustable
◆ Power good signal
◆ Low ripple and noise
◆ Overload and short-circuit protection
◆ Optional module for parallel and
redundant operation
◆ Worldwide safety approval package
◆ 3-year product warranty
The TRACOPOWER TPC series is a family of lightweight DIN-rail power supplies with
an excellent price/performance ratio. They consume sparse standby power, and op-
erate with high efficiency to comply with the requirements of the European Ecodesign
directive. They have universal input of 85-264VAC or 90-375VDC and are designed for
class I operation in industrial and residential environments. With the optional active
current sharing redundancy module, these power supplies provide a very reliable
true redundant DC supply. For further details see page 3.
Order Code Input Voltage Output Power Output Voltage Output Current
Ranges max. nominal /adj. range max.
TPC 030–105 20 W 5.0 VDC /5.0–6.0 VDC 4.0 A
TPC 030–112 26 W 12 VDC /12–15 VDC 2.2 A
TPC 030–124 30 W 24 VDC /24–28.8 VDC 1.25 A
TPC 030–148 85 – 264 VAC 30 W 48 VDC /48–56 VDC 0.6 A
TPC 055–112 Universal Input 42 W 12 VDC / 12–15 VDC 3.5 A
TPC 055–124 47/63 Hz 55 W 24 VDC /24–28.8 VDC 2.3 A
TPC 055–148 90 – 375 VDC 55 W 48 VDC / 48–56 VDC 1.15 A
TPC 080–112 72 W 12 VDC / 12–15 VDC 6.0 A
TPC 080–124 80 W 24 VDC /24–28.8 VDC 3.3 A
TPC 080–148 80 W 48 VDC /48–56 VDC 1.7 A
TPC 120–112 96 W 12 VDC / 12–15 VDC 8.0 A
TPC 120–124 120 W 24 VDC /24–28.8 VDC 5.0 A
TPC 120–148 120 W 48 VDC /48–56 VDC 2.5 A
Models
UL 60950-1UL 508
CB
Scheme
http://www.tracopower.com Page 2 of 4
Industrial Power Supplies
TPC Series 30 to 120 Watt
Input Specifications
Input voltage range – AC nominal rated 110 – 240 VAC, 50-60 Hz
– AC range (designed for) 85 – 264 VAC, 47-63 Hz
– DC nominal rated 130 – 300 VDC
– DC range (designed for) 90 – 375 VDC
Output derating – at operation <100 VAC
-
2.5% /V
– at operation <130 VDC
-
1.0% /VDC
Standby power consumption TPC 030 and 055 models: < 0.3 W
TPC 080 and 120 models: < 0.5 W
Harmonic limits EN 61000-3-2, Class A
Recommended circuit breaker, characteristic C 6.0 – 16.0 A
Output Specifications
Output voltage adjustable range 5 VDC model: 5.0 – 6.0 VDC
(potentiometer on frontpanel) 12 VDC models: 12 – 15 VDC
24 VDC models: 24 – 28.8 VDC
48 VDC models: 48 – 56 VDC
Regulation – Input variation 0.5 % max.
– Load variation (0–100 %) 5 VDC models: 0.75 % max.
other models: 0.5 % max.
Ripple and noise (20MHz bandwidth) 100 mVpk-pk max.
Short circuit protection <200 % of Iout nom.
Overvoltage protection (% of max. adjustable voltage) 5 VDC model: <180 %
12 VDC models: <170 %
24 VDC models: <160 %
48 VDC models: <107 %
Power back immunity 125 % of nominal Vout
Start-up time 2 sec. max.
Hold-up time (115 VAC / 230 VAC) min. 15 ms / min. 40 ms
Power OK signal – trigger 80 – 95 %
– PNP open collector max. current 48 VDC models: 5 mA
other models: 10 mA
General Specifications
Temperature ranges – Operating –25°C to +70°C max.
– Storage (non operating) –25°C to +85°C
Temperature derating 2.5 %/K above 50°C
Humidity (non condensing) 95 % rel. H max.
Temperature coefficient 0.02 %/K
Remote On/Off 10 mA current source
Efficiency (average at power consumption 25-100%) TPC 030-105: 79 %
other 30 Watt models: 84 %
other models: 87 %
Reliability, calculated MTBF at +25°C TPC 030 models: >2.2 Mio h
(according to IEC-1709) TPC 055 models: >1.7 Mio h
TPC 080 models: >1.5 Mio h
TPC 120 models: >1.3 Mio h
Isolation voltage (60 s) – Input / Output 3000 VAC
Altitude during operation 2‘000m max. (6‘500 ft) approved
http://www.tracopower.com Page 3 of 4
General Specifications
Safety standards – CB test certificate IEC 60950-1:2005 2nd Ed, Am 1:2009
– SIQ type approved EN 60950-1 :2006 + Am 1 :2010 +
Am 11 :2009 + Am 12:2011
– CSA certificate of compliance UL 60950-1-2nd Ed
CSA 60950-1-07-2nd Ed
– UL certificate of compliance UL 508, CSA C22.2 No.107.1-01
– SIQ type approved EN 60204-1:2006 + A1:2009,
EN 61558-2-8:2010, EN 61558-2-16:2009,
EN 50178:1997
– Certification documents www.tracopower.com/overview/tpc
Environmental compliance – Reach declaration document www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
EMC – emissions IEC 61000-6-3 (residential environment)
– immunity IEC 61000-6-2 (industrial environment)
SEMI F47
Class of protection class I (earth connection needed)
Case protection IP 20 (IEC 60529)
Enclosure material Makrolon 2405 (UL 94V-0 rated)
Mounting DIN-rails as per EN 50022-35x15/7.5
(snap-on with self-locking spring)
wall mounting bracket optional (not included)
Industrial Power Supplies
TPC Series 30 to 120 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
TPC–REM240-24 Redundancy Module
These modules are external units for operation with two TPC power supplies with
output voltage of 24 VDC or 48 VDCand of same type and power. The modules
allow to connect two outputs of TPC power supplies together in order to achieve a
reliable DC supply. In normal operation the module achieves equal current share
for both power supplies connected. During the redundancy operation, if one of
the power supplies fails, the output power will be provided in full by the remain-
ing operating power supply. The redundancy of the DC system is monitored by a
DC-OK signal.
Order Code Nominal Input
Voltage
Max Power
per Input
Output Voltage
adjustable
Output Current
max.
TPC–REM240–24 24 VDC 120 W 24 – 27 VDC 10 A
TPC–REM240–48 48 VDC 48 – 55 VDC 5 A
Specifications
Operating temperature –25°C to +50°C max.
Electromagnetic compatibility in correspondence to connected units
(no internal switching device)
Dimensions same as model TPC 055 (see page 4)
Connection screw terminal block
Installation instructions – installation document www.tracopower.com/overview/tpc
Supporting documents: www.tracopower.com/overview/tpc
Page 4 of 4
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Industrial Power Supplies
TPC Series 30 to 120 Watt
Rev. October 3, 2018
Case Dimensions
Dimensions in [mm], ( ) = Inch
Tolerances: ±0.5 mm (±0.02)
d
--
++DC-OK
PE NL
DC-ON
V adj.
w
h
Model Width (W) Heigth Depth d Weight
TPC 030 26.5 (1.04) 90 (3.54) 96.5 (3.80) 160 g
TPC 055 45.0 (1.77) 90 (3.54) 96.5 (3.80) 260 g
TPC-REM 240-24 45.0 (1.77 90 (3.54) 96.5 (3.80) 160 g
TPC 080 63.0 (2.48) 90 (3.54) 96.5 (3.80) 360 g
TPC 120 72.0 (2.83) 90 (3.54) 110.0 (4.33) 440 g
Wall Mounting Bracket (accessories not included)
Order Code For Models Dimensions
TPC–WMK1 TPC 030-xx 26.0 x 35 x 7.5
TPC–WMK2 TPC 055-xx,
TPC-REM 240–24 42.7 x 35 x 7.5
TPC-WMK3 TPC 080-xx 60.7 x 35 x 7.5
TPC-WMK4 TPC 120-xx 69.7 x 35 x 7.5
Snap-on bracket for wall mounting (black plastic)
