T-1 (3 mm) High Intensity
LED Lamps
Technical Data
Features
• High Intensity
• Choice of 3 Bright Colors
High Efficiency Red
Yellow
High Performance Green
• Popular T-1 Diameter
Package
• Selected Minimum
Intensities
• Narrow Viewing Angle
• General Purpose Leads
• Reliable and Rugged
• Available on Tape and Reel
• For more information,
please refer to Tape and
Reel Option Data Sheet
Description
This family of T-1 lamps is
specially designed for applica-
tions requiring higher on-axis
intensity than is achievable with a
standard lamp. The light
generated is focused to a narrow
beam to achieve this effect.
HLMP-132x Series
HLMP-142x Series
HLMP-152x Series
Package Dimensions
Selection Guide
Luminous Intensity
Part Package Iv (mcd) @ 10 mA
Number Description Color Min. Max.
HLMP-1320-G00xx 8.6 –
HLMP-1320 GH0xx 8.6 27.6
HLMP-1321 8.6 –
HLMP-1321-G00xx 8.6 –
HLMP-1321-HI0xx 13.8 44.0
HLMP-1420 9.2 –
HLMP-1420-F00xx 9.2 –
HLMP-1421 9.2 –
HLMP-1421-F00xx 9.2 –
HLMP-1421-FG0xx 9.2 29.4
HLMP-1520 6.7 –
HLMP-1520-E00xx 6.7 –
HLMP-1521 6.7 –
HLMP-1521-E00xx 6.7 –
HLMP-1521-EF0xx 6.7 21.2
High
Efficiency
Red
Untinted,
Nondiffused
Tinted,
Nondiffused
Yellow
Microtinted,
Nondiffused
Tinted,
Nondiffused
Microtinted,
Nondiffused
Tinted,
Nondiffused
Green
2
Absolute Maximum Ratings at TA = 25°C
Parameter Red Yellow Green Units
Peak Forward Current 90 60 90 mA
Average Forward Current[1] 25 20 25 mA
DC Current[2] 30 20 30 mA
Power Dissipation[3] 135 85 135 mW
Reverse Voltage (IR = 100 µA) 5 5 5 V
Transient Forward Current[4] 500 500 500 mA
(10 µsec Pulse)
LED Junction Temperature 110 110 110 °C
Operating Temperature Range -55 to +100 -55 to +100 -20 to +100 °C
Storage Temperature Range -55 to +100
Lead Soldering Temperature 260°C for 5 seconds
[1.6 mm (0.063 in.) from body]
Notes:
1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at
1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED
die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.
Part Numbering System
HLMP - 1 x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
A1: Right Angle Housing, Uneven Leads
A2: Right Angle Housing, Even Leads
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Lens Options
20: Untinted or Microtinted, Non-diffused
21: Tinted, Non-diffused
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
Package Options
1: T-1 (3 mm)
3
Notes:
1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = lv/ηv, where lv is the luminous intensity in candelas
and ηv is the luminous efficacy in lumens/watt.
Electrical Characteristics at TA = 25°C
Device Test
Symbol Description HLMP- Min. Typ. Max. Units Conditions
IVLuminous Intensity 1320 8.6 30 mcd IF = 10 mA
1321 8.6 30 (Figure 3)
1420 9.2 15 mcd IF = 10 mA
1421 9.2 15 (Figure 8)
1520 6.7 22 mcd IF = 10 mA
1521 6.7 22 (Figure 3)
2θ1/2Including Angle Between All 45 Deg. IF = 10 mA
Half Luminous Intensity See Note 1
Points (Figures 6, 11, 16, 21)
λPEAK Peak Wavelength 132x 635 nm Measurement
at Peak (Figure 1)
142X 583
152X 565
∆λ1/2 Spectral Line Halfwidth 132x 40 nm
142X 36
152X 28
λdDominant Wavelength 132x 626 nm See Note 2 (Figure 1)
142X 585
152X 569
τsSpeed of Response 132x 90 ns
142X 90
152X 500
C Capacitance 132x 11 pF VF = 0; f = 1 MHz
142X 15
152X 18
RθJ-PIN Thermal Resistance All 290 °C/W Junction to
Cathode Lead
VFForward Voltage 132x 1.9 2.4 V IF = 10 mA
142X 2.0 2.4
152X 2.1 2.7
VRReverse Breakdown All 5.0 V IR = 100 µA
Voltage
ηVLuminous Efficacy 132x 145 lumens See Note 3
142X 500 Watt
152X 595
4
Figure 3. Relative Luminous Intensity
vs. DC Forward Current.
Figure 2. Forward Current vs.
Forward Voltage Characteristics. Figure 4. Relative Efficiency
(Luminous Intensity per Unit
Current) vs. Peak LED Current.
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDC MAX
as per MAX Ratings).
Figure 6. Relative Luminous Intensity vs. Angular Displacement.
Figure 1. Relative Intensity vs. Wavelength.
T-1 High Efficiency Red Non-Diffused
5
T-1 Yellow Non-Diffused
Figure 10. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDCMAX
as per MAX Ratings).
Figure 11. Relative Luminous Intensity vs. Angular Displacement.
Figure 8. Relative Luminous Intensity
vs. Forward Current.
Figure 7. Forward Current vs.
Forward Voltage Characteristics. Figure 9. Relative Efficiency
(Luminous Intensity per Unit
Current) vs. Peak Current.
6
T-1 Green Non-Diffused
Figure 13. Relative Luminous
Intensity vs. Forward Current.
Figure 12. Forward Current vs.
Forward Voltage Characteristics. Figure 14. Relative Efficiency
(Luminous Intensity per Unit
Current) vs. Peak LED Current.
Figure 15. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDCMAX
as per MAX Ratings).
Figure 16. Relative Luminous Intensity vs. Angular Displacement.
7
Intensity Bin Limits, continued
Intensity Range (mcd)
Color Bin Min. Max.
E 7.6 12.0
F 12.0 19.1
G 19.1 30.7
H 30.7 49.1
I 49.1 78.5
J 78.5 125.7
K 125.7 201.1
L 201.1 289.0
Green M 289.0 417.0
N 417.0 680.0
O 680.0 1100.0
P 1100.0 1800.0
Q 1800.0 2700.0
R 2700.0 4300.0
S 4300.0 6800.0
T 6800.0 10800.0
U 10800.0 16000.0
V 16000.0 25000.0
W 25000.0 40000.0
Intensity Bin Limits
Intensity Range (mcd)
Color Bin Min. Max.
G 9.7 15.5
H 15.5 24.8
I 24.8 39.6
J 39.6 63.4
K 63.4 101.5
L 101.5 162.4
M 162.4 234.6
N 234.6 340.0
O 340.0 540.0
Red P 540.0 850.0
Q 850.0 1200.0
R 1200.0 1700.0
S 1700.0 2400.0
T 2400.0 3400.0
U 3400.0 4900.0
V 4900.0 7100.0
W 7100.0 10200.0
X 10200.0 14800.0
Y 14800.0 21400.0
Z 21400.0 30900.0
F 10.3 16.6
G 16.6 26.5
H 26.5 42.3
I 42.3 67.7
J 67.7 108.2
K 108.2 173.2
L 173.2 250.0
Yellow M 250.0 360.0
N 360.0 510.0
O 510.0 800.0
P 800.0 1250.0
Q 1250.0 1800.0
R 1800.0 2900.0
S 2900.0 4700.0
T 4700.0 7200.0
U 7200.0 11700.0
V 11700.0 18000.0
W 18000.0 27000.0
Maximum tolerance for each bin limit is ±18%.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
June 11, 2001
Obsoletes 5968-4163E (11/99)
5988-0931EN
Color Categories
Lambda (nm)
Color Category # Min. Max.
6 561.5 564.5
5 564.5 567.5
Green 4 567.5 570.5
3 570.5 573.5
2 573.5 576.5
1 582.0 584.5
3 584.5 587.0
Yellow 2 587.0 589.5
4 589.5 592.0
5 592.0 593.0
Maximum tolerance for each bin limit is ±0.5 nm.
Mechanical Option Matrix
Mechanical Option Code Definition
00 Bulk Packaging, minimum increment 500 pcs/bag
01 Tape & Reel, crimped leads, minimum increment 1800 pcs/bag
02 Tape & Reel, straight leads, minimum increment 1800 pcs/bag
A1 Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
A2 Right Angle Housing, even leads, minimum increment 500 pcs/bag
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
