CXE15-48S05-RT - Artesyn Technologies, Inc.

DC-DC CONVERTERS 10.8-15 W High Efficiency DC-DC Converters 1

2 YEAR WARRANTY

CXE15 Series

Single output

•High efficiency topology, 87% typical at 5 V

•Industry standard footprint

•Wide operating temperature, up to and exceeding 70 ˚C

(natural convection)

•90% to 110% output trim

•No minimum load

•Overvoltage protection

•Remote ON/OFF control

The CXE15 is a new high efficiency open frame isolated 15 Watt converter series

in an industry standard footprint. The first four models in the series feature an input

voltage range of 33 Vdc to 75 Vdc and are available in output voltages of 5 V,

3.3 V, 2.5 V and 1.8 V. The output voltage on each model is adjustable from 90%

to 110% of the nominal value. Typical efficiencies for the models are 87% for the 5

V, 86% for the 3.3 V, 85% for the 2.5 V and 83% for the 1.8 V version. The CXE15

series also has a remote ON/OFF capability with active high or active low logic.

Overcurrent and overvoltage protection features are included as standard. With full

international safety approval including EN60950 and cUL1950, the CXE15 reduces

compliance costs and time to market.

All specifications are typical at nominal input, full load at 25 °C unless otherwise stated

EMC CHARACTERISTICS

Conducted emissions

EN55022 (See Note 3)

Level A

EN55022 (See Note 3)

Level B

Radiated emissions

EN55022 (See Longform datasheet)

Level B

Immunity:

ESD air EN61000-4-2 8 kV, 15 kV

ESD contact EN61000-4-2 6 kV, 8 kV

Radiated field enclosure EN61000-4-3 10 V/m

Conducted (dc power) EN61000-4-6 10 V

Conducted (signal) EN61000-4-6 10 V (See Note 8)

Input transients ETS 300 132-2, ETR 283

GENERAL SPECIFICATIONS

Efficiency See table

Operational insulation Input/output 1500 Vdc

Switching frequency Fixed 265 kHz typ.

Approvals and UL/cUL1950, EN60950

standards TÜV Rheinland

(See Note 5)

Material flammability UL94V-0

Weight 12 g (0.42 oz)

MTBF MIL-HDBK-217F 3,628,000 hours

Representative model: 48S05J @ 48 Vin, 40 °C,

100% load ground benign

BELLCORE 332 >1,500,000 hours

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Operating ambient -40 °C to +65 °C

(See Note 9) temp. (3.3 V and 5 V)

Operating ambient -40 °C to +70 °C

temp. (1.8 V and 2.5 V)

Non-operating -40 °C to +120 °C

(All models)

OUTPUT SPECIFICATIONS

Voltage adjustability 90% to 110%

Total error band (See Note 11) ±3.5% max.

Line regulation 1.8 V and 2.5 V models 0.5% max.

Low line to high line 3.3 V and S05 models 0.1% max.

Load regulation 1.8 V model 2.0% max.

Full load to min. load 2.5 V model 1.5% max.

3.3 V and S05 models 0.5% max.

Minimum load 0%

Overshoot 1.8 V and 2.5 V models 3.5% max.

3.3 V and S05 models None

Undershoot None

Ripple and noise 1.8 V and 2.5 V models 40 mV pk-pk

(See Note 1) 14 mV rms

5 Hz to 20 MHz 3.3 V and S05 models 70 mV pk-p

20 mV rms

Transient response 1.8 V and 2.5 V models 150 mV

(See Note 2) 3.3 V and S05 models 100 mV

typ. deviation 400 µs recovery to

within total error band

INPUT SPECIFICATIONS

Input voltage range 48 Vin nominal 33-75 Vdc

Input current No load 35 mA max.

Remote OFF 25 mA max.

Input current (max.) (See Note 4) 0.55 A max. @ Io max.

and Vin = 33-75 Vdc

Input reflected ripple (See Note 6) 5 mA (pk-pk) typ.

Active high remote ON/OFF (See Note 10)

Logic compatibility Open collector ref to -input

ON Open circuit or >2 Vdc

OFF <1.2 Vdc

Undervoltage lockout Power up 33 V (typ.)

Power down 30 V (typ.)

Start-up time Power up 1.5 ms (typ.)

(See Note 7) Remote ON/OFF 2.5 ms (typ.)

SPECIFICATIONS

File Name: cxe15s_obs.pdf Rev: 01 Mar 2006

TÜV

For the most current data and application support visit w w w.artesyn.com/powerg roup/produ cts.htm

NNootteess

1Measured as per recommended set-up. See Application Note 116 for

details.

2di/dt = 0.1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to

0.75 lo max. and 0.75 lo max. to 0.5 lo max.

3The CXE15 meets level A and level B conducted emissions only with

external components connected before the input pins to the converter.

See Application Note 116 for details.

4Recommended input fusing is a 2 A HRC 200 V rated fuse.

5This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

6Measured with external filter. See Application Note 116 for details.

7Start-up into resistive load.

8Signal line assumed < 3 m in length.

9Operating ambient temperatures are specified at natural convection.

Higher operating temperatures are possible with increased airflow. See

Application Note 116 for details.

10 Remote ON/OFF (pin 3) and Trim (pin 5) are currently available individually

or together by special order only. Manufacturing lead times may apply. The

base model includes pins 1, 2, 4, and 6. Use the suffix ‘–R’ for pin 3 with

negative logic, ‘-S’ for pin 3 with positive logic, and ‘-T’ for the Trim pin.

11 This parameter is calculated at worst case line, load, temperature and initial

settings.

CAUTION: Hazardous internal voltages and high temperatures.

Ensure that unit is not user accessible.

PROTECTION

Short circuit Continuous

Overvoltage Non-latching clamp

TELECOM SPECIFICATION

Central office interface A ETS300-132-2, input voltage

and current requirements

CXE15 Series

Single output

DC-DC CONVERTERS 10.8-15 W High Efficiency DC-DC Converters 2

File Name: cxe15s_obs.pdf Rev: 01 Mar 2006

OUTPUT INPUT OVP OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODEL

POWER VOLTAGE VOLTAGE CURRENT CURRENT (TYP.) LINE LOAD NUMBER (10)

(MAX.) (MIN.) (MAX.)

10.8 W 33-75 Vdc 2.3 Vdc 1.8 V 0 A 6 A 83% 0.3% 2.0% CXE15-48S1V8

15 W 33-75 Vdc 3.2 Vdc 2.5 V 0 A 6 A 85% 0.3% 1.5% CXE15-48S2V5

15 W 33-75 Vdc 4 Vdc 3.3 V 0 A 4.5 A 86% 0.1% 0.5% CXE15-48S3V3

2006

The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.

For the most current data and application support visit w w w.artesyn.com/powerg roup/produ cts.htm

CXE15 Series

Single output

DC-DC CONVERTERS 10.8-15 W High Efficiency DC-DC Converters 3

Please consult our website for the following items: 4 Application Note 4 Longform Data Sheet www.artesyn.com

File Name: cxe15s_obs.pdf Rev: 01 Mar 2006

International Safety Standard Approvals

UL/cUL 1950 3rd edition. File No. E135734

TÜV Rheinland. Certificate No. R2074133

File No. 10401-3336-0916

1.000 (25.40)

TOP VIEW

SIDE VIEW

BOTTOM VIEW

2.000 (50.80)

0.600 (15.24) 0.600 (15.24)

0.800 (20.32)

0.200 (5.08)

0.300 (7.62)

0.10

(2.54)

0.400 (10.16)

0.800 (20.32)

0.120 (3.05)

0.100

(2.54) 0.800 (20.32) Case Outline

0.400 (10.16)

0.040 (1.016)

0.200

(5.08)

0.200 (5.08)

.200(5.08) .560 (14.22)

.060 (1.52)

Standoff (4 places) Plated Through Hole

0.052-0.06 (1.321-1.40) typical

Recommended Hole Pattern

0.015 (0.38)

0.350 (8.89)

0.400 (10.16)

0.600 (15.24)

0.040 (1.02)

Dimensions in Inches [mm]

PIN CONNECTIONS

PIN NUMBER FEATURE

1Vin -

2 Vin +

3 On/Off (See Note 10)

4 Vout +

5 Trim (See Note 10)

6 Vout -

TÜV