SENSOR SOLUTIONS ///U5300
Page 1
02/2016
U5300
Industrial Pressure Transducer
SPECIFICATIONS
Superior Accuracy and Total Error Band
Instrument Grade and Compact
Variety of Pressure Ports and Electrical Configurations
Optional Stainless Steel Snubber
CE Compliant and Weatherproof
Gage, Sealed, Absolute, Compound
Expedite Configurations Available (10 Days)
The instrument grade U5300 pressure transducers from the
UltraStable line of MEAS, with their modular design, offer maximum flexibility
for different configurations. This latest series features superior accuracy and
total error band for demanding commercial and heavy industrial applications.
This series is suitable for measurement of liquid or gas pressure, even for
difficult media such as contaminated water, steam, and mildly corrosive
fluids.
The wetted material is made of 316L stainless steel and the
transducer’s durability is excellent with no o-rings or organics exposed to the
pressure media. The U5300 is weatherproof and exceeds the latest heavy
industrial CE requirements including surge protection. The circuit is protected
from reverse wiring at input and short circuit at output.
This product is geared to the OEM customer for low to mid volumes.
MEAS stands ready to provide a custom design of the U5300 where the
volume and application warrants. Additional configurations not listed are
either available or possible. Please inquire for further information.
U5300
Industrial Pressure Transducer
SENSOR SOLUTIONS ///U5300
02/2016
Page 2
FEATURES
Heavy Industrial CE Approval
10 V/m EMI Protection
Reverse Polarity Protection on Input
Short Circuit Protection on Output
±0.1% Accuracy
±0.5% Total Error Band
Compact Outline
-40°C to +125°C Operating Temperature
Weatherproof
APPLICATIONS
Military/Aerospace Test Stands
Automotive Test Stands
Calibration Equipment
High Accuracy Applications
Stationary Motor Fuel Control
High End Industrial Machinery
STANDARD RANGES
Range (psi)
Range (Bar)
Gage
Sealed
Absolute
Compound
0 to 005
0 to .35
0 to 015
0 to 001
0 to 030
0 to 002
0 to 050
0 to 3.5
0 to 100
0 to 007
0 to 010
0 to 200
0 to 300
0 to 020
0 to 500
0 to 035
0 to 01k
0 to 070
0 to 03k
0 to 200
0 to 05k
0 to 350
0 to 10k
0 to 700
Intermediate ranges available upon request.
U5300
Industrial Pressure Transducer
SENSOR SOLUTIONS ///U5300
02/2016
Page 3
PERFORMANCE SPECIFICATIONS
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
TYP
MAX
UNITS
NOTES
Accuracy
(RSS of linearity, hysteresis, and repeatability)
-0.1
0.1
%F.S. BFSL
Isolation, Body to any Lead
100
MΩ
@500VDC
Dielectric Strength
2
mA
@500VAC, 1min
Pressure Cycles
1.00E+6
0~FS Cycles
Proof Pressure
3X
20k psi
Rated
Burst Pressure
4X
20k psi
Rated
Long Term Stability (1 year)
-0.1
0.1
%F.S.
Offset
-0.25
0.25
%F.S.
@25°C
Span
-0.25
0.25
%F.S.
@25°C
Total Error Band
-0.5
0.5
%F.S.
Over compensated temperature
Compensated Temperature
-20
+85
°C
Operating Temperature
-40
+125
°C
Except cable 105°C max
Storage Temperature
-40
+125
°C
Except cable 105°C max
Load Resistance (RL)
RL > 100k
Ω
Voltage Output
Load Resistance (RL)
< (Supply Voltage -9V) / 0.02A
Ω
Current Output
Current Consumption
5
mA
Voltage Output
Rise Time (10% to 90%)
<2ms (Voltage Output); <3ms (Current Output); Without Snubber
Pressure Port Material
316L Stainless Steel; 316L Stainless Steel Snubber
Shock
50g, 11msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A
Vibration
±20g, MIL-STD-810C, Procedure 514.2, Fig 514.2-2, Curve L
For custom configurations, consult factory.
Notes
Compensated Temperature: The temperature range over which the product will produce an output proportional to pressure within the specified
performance limits.
Operating Temperature: The temperature range over which the product will produce an output proportional to pressure but may not remain
within the specified performance limits.
Storage Temperature: The temperature range over which the product can be stored safely in occasions without pressure applied or power
input and remains rated performance. Beyond this temperature range may cause permanent damage to the product.
All configurations are built with supply voltage reverse and output short-circuit protections.
CE Compliance
EN 55022 Emissions Class A & B
IEC 61000-4-2 Electrostatic Discharge Immunity (8kV contact/15kV air)
IEC 61000-4-3 Radiated, Radio-Frequency Electromagnetic Field Immunity (10V/m, 80M-1GHz)
IEC 61000-4-4 Electrical Fast Transient Immunity (1kV)
IEC 61000-4-5 Surge Immunity (V+ to V-: ±2KV/42Ω; L to Case: ±1KV/12Ω; V- to V0: ±1KV/42Ω)
IEC 61000-4-6 Immunity to Conducted Disturbances Induced by Radio Frequency
Fields (150K~80MHz, 10V level for voltage output models, 3V level for current output model)
IEC 61000-4-9 Pulse Magnetic Field Immunity (100A/m peak)
For all CE compliance tests, max allowed output deviation ±1.5 %F.S.
U5300
Industrial Pressure Transducer
SENSOR SOLUTIONS ///U5300
02/2016
Page 4
DIMENSIONS [mm]
Note: Refer to installation instructions supplied with devices for
recommended torque
CODE
CONNECTION TYPE
DIM A
1
CABLE 2 FT
2.19 [55.6]
E
CABLE 3 FT
2.19 [55.6]
2
CABLE 4 FT
2.19 [55.6]
3
CABLE 10 FT
2.19 [55.6]
4
PACKARD CONNECTOR A
2.25 [57.2]
5
BAYONET CONNECTOR
2.11 [53.6]
6
FORM C
1.95 [49.5]
7
FORM A
2.10 [53.3]
9
PACKARD CONNECTOR B
2.25 [57.2]
D
M12 CONNECTOR
1.95 [49.5]
M
CABLE 1 M
2.19 [55.6]
N
CABLE 2 M
2.19 [55.6]
P
CABLE 5 M
2.19 [55.6]
R
CABLE 10 M
2.19 [55.6]
A
AMP CONNECTOR
2.10 [53.3]
S
SUMITOMO CONNECTOR
1.95 [49.5]
C
1/2" NPT CONDUIT
2.10 [53.3]
PRESSURE PORT TYPE
CODE
PORT
DIM B
DIM C REF.
2
1/4-19 BSPP
0.472
0.366
[11.94]
[9.3]
3
G3/8 JIS B2351
0.540
0.366
[13.72]
[9.3]
4
7/16-20UNF MALE SAE J1926-
2 STRAIGHT THREAD O-
RING BUNA-N 90SH-904
0.433
0.366
[11.0]
[9.3]
5
1/4-18 NPT
0.600
0.366
[15.24]
[9.3]
6
1/8-27 NPT
0.390
0.366
[9.91]
[9.3]
B
G1/4 JIS B2351
0.472
0.366
[11.94]
[9.3]
E
1/4-19 BSPT
0.500
0.366
[12.7]
[9.3]
F
1/4-19 BSPP FEMALE
(without snubber)
0.771
0.366
[19.58]
[9.3]
P
7/16-20UNF FEMALE SAE
J513 STRAIGHT THREAD
WITH INTEGRAL VALVE
DEPRESSOR
0.687
0.366
[17.5]
[9.3]
N
7/16-20UNF FEMALE SAE
J513 STRAIGHT THREAD
0.687
0.366
[17.5]
[9.3]
Q
M10 x 1.0 mm ISO 6149-2
0.374
0.366
[9.5]
[9.3]
S
M12 x 1.5 mm ISO 6149-2
0.433
0.366
[11.0]
[9.3]
U
G/14 DIN 3852 FORM E
GASKET DIN3869-14 NBR
0.472
0.445
[11.94]
[11.3]
W
M20 x 1.5 mm ISO 6149-2
0.551
0.366
[14.0]
[9.3]
G
M14 x 1.5 mm ISO 6149-2
0.433
0.366
[11.0]
[9.3]
1
4
3
2
2
1
3
2
1
3
21 3
2
1 3
U5300
Industrial Pressure Transducer
SENSOR SOLUTIONS ///U5300
02/2016
Page 5
WIRING
CONNECTION +SUPPLY -SUPPLY P REF VENT
Bayonet A B F
Packard, A A B
Hole Through
Connector
Packard, B B A
Hole Through
Connector
Cable RED BLK In Cable
1/2NPT CONDUIT RED BLK In Cable
M12 1 3
Hole Through
Connector
AMP/TE 1 2
Hole Through
Connector
FORM C 1 2
Threads Through
Connector
FORM A 1 2
Threads Through
Connector
Sumitomo 1 2
Hole Through
Connector
CONNECTION +SUPPLY +OUTPUT COMMON NC. PINS P REF VENT
Bayonet A B C D,E F
Packard, A A C B
Hole Through
Connector
Packard, B B C A
Hole Through
Connector
Cable RED WHT BLK In Cable
1/2NPT CONDUIT RED WHT BLK In Cable
M12 1 2 3 4
Hole Through
Connector
AMP/TE 1 3 2
Hole Through
Connector
FORM C 1 2 3 4
Threads Through
Connector
FORM A 1 3 2 4
Threads Through
Connector
Sumitomo 1 3 2
Hole Through
Connector
Current Output Wiring
Voltage Output Wiring
NC. PINS
C,D,E
C
C
2,4
3
3,4
3,4
3
Notes:
1. NC pins are reserved for factory use only. Customers should not use these connections.
2. For cable connection, the drain wire is internally terminated to pressure port.
U5300
Industrial Pressure Transducer
SENSOR SOLUTIONS ///U5300
02/2016
Page 6
CONNECTION TYPES
Note: Transmitter of gage pressure type requires vent to atmosphere on the pressure reference side. This is accomplished via cable from the
transmitter (the end of the cable should be terminated to clean and dry area) or through the customer mating connector/cable assembly
which has internal vent path.
Suggested vented M12 mating connector P/N MB12FWAFF04ST-4 and MB12FWAFF04ST-3 at www.finecables.com for 0.157”~0.236”
and 0.236”~0.315” diameter cable respectively.
WEATHERPROOF
Note: Weatherproof ratings are met when the mating connectors are installed properly and the cable termination is to dry and clean area.
OUTPUTS
CONNECTION DESCRIPTION
MATING HOUSING
P/N MATING TERMINAL
P/N RUBBER SEAL
P/N
Bayonet BAYONET PTIH-10-6P OR EQUIV PT06A-10-6S MIL-C-26482 - -
Packard 3-PIN METRI-PACK 150 12078090 12103881, QT Y 3 -
Cable &
1/2NPT
Conduit
4-WIRE,22 AWG, SHIELDED,
PVC JACKET, 105 DEGC
- - -
M12
BINDER SERIES 713,
09 3431 77 04 OR EQUIV
4-POS FEMALE CONNECTOR - -
AMP/TE
AMP / TE 3-PIN ECONOSEAL
J SERIES
174357-2 & 174358-7
171630-1 (AWG 20~24)
171662-1 (AWG 16~20)
QTY 3
172746-1 (AWG 20~24)
172888-2 (AWG 16~20)
QTY 3
FORM C
INDUSTRIAL STANDARD 9.4MM
FORM C
HIRSCHMANN 933 024-100,OR,
ATAM KD046000B7 (SEAL INCL.)
- HIRSCHMANN 730 185-002
FORM A DIN EN 175 301-803-A 18MM
HIRSCHMANN 931 969-100,OR,
ATAM KA245000B4 (SEAL INCL.)
- HIRSCHMANN 730 801-002
Sumitomo SUMITOMO 3-PIN HV040
6189-6907
8100-3067 (AWG 20~22)
8100-3068 (AWG 16~18)
QTY 3
7165-1075 (INS. DIA 1.1~1.6MM)
7176-0621 (INS. DIA 1.6~1.9MM)
7165-0622 (INS. DIA 1.8~2.2MM)
QTY 3
CONNECTION TYPES
CONNECTION IP CODE
Bayonet IP67
Packard IP66
Cable IP67
1/2NPT CONDUIT IP67
M12 IP67
AMP/TE IP67
FORM C IP65
FORM A IP65
Sumitomo IP67
WEATHER-PROOF RATING
CODE
OUTPUT SIGNAL SUPPLY VOLTAGE
3
0.5 - 4.5V
RATIOMETRIC
5 ± 0.25V
PROTECTED to 30V
4
1 - 5V 8 - 30V
5
4 - 20mA 9 - 30V
6
0 - 5V 8 - 30V
7
0 - 10V 12 - 30V
8
1 - 6V 8 - 30V
9
0.5 - 4.5V 5 - 30V
U5300
Industrial Pressure Transducer
SENSOR SOLUTIONS ///U5300
02/2016
Page 7
ORDERING INFORMATION
U53
3
1
-
0
0
00
0
5
-
100P
G
Model
Output
Signal
Connection Type
-
Shipping
Snubber
00
Label
Pressure
Port
-
Pressure
Range
Pressure
Type
U53
3 = 0.5 – 4.5V
Ratiometric
4 = 1 – 5V
5 = 4 – 20mA
6 = 0 – 5V
7 = 0 – 10V
8 = 1 – 6V
9 = 0.5 – 4.5V
1 = Cable 2 ft
E = Cable 3 ft
2 = Cable 4 ft
3 = Cable 10 ft
4 = Packard
Connector A
5 = Bayonet
Connector
6 = Form C
7 = Form A
9 = Packard
Connector B
D = M12 Connector
M = Cable 1 m
N = Cable 2 m
P = Cable 5 m
R = Cable 10 m
A = Amp Connector
S = Sumitomo
Connector
C = 1/2“ NPT
Conduit
-
0 = Standard
H = Expedite
0 = No Snubber
1 = With Snubber
00
0 = Adhesive Label
1 = Laser Marking
2 = 1/4-19 BSPP
3 = G3/8 JIS B2351
4 = 7/16-20UNF
Male SAE J514
Straight Thread O-
Ring BUNA-N 90SH-
904
5 = 1/4-18 NPT
6 = 1/8-27NPT
B = G1/4 JIS B2351
E = 1/4-19 BSPT
F = 1/4-19 BSPP
Female
P = 7/16-20UNF
Female SAE J514
with Integral Valve
Depressor
Q = M10 x 1.0 mm
ISO 6149-2
N = 7/16-20UNF
Female SAE J513
Straight Thread
S = M12 x 1.5 mm
ISO 6149-2
U = G1/4 DIN 3852
Form E Gasket
DIN3869-14 NBR
W = M20 x 1.5 mm
ISO 6149-2
G = M14 x 1.5 mm
ISO 6149-2
-
002P
005P
015P
030P
050P
100P
200P
300P
500P
01KP
03KP
05KP
10KP
.14B
.35B
001B
002B
3.5B
007B
010B
020B
035B
070B
200B
350B
700B
G = Gage
S = Sealed
A = Absolute
C = Compound
G = Gage
S = Sealed
A = Absolute
C = Compound
G = Gage
S = Sealed
(Port 2, 5 only)
A = Absolute
(Port 2, 5 only)
C = Compound
Note: Selections in blue (expedite) have a 10 business day lead time with a 19 piece maximum order.
Compound pressure range is -14.7 to xxxpsig or -1 to xxxbarg. (e.g. 200PC: -14.7 to 200psig, 020BC: -1 to 20barg)
Refer to online installation instruction for recommended torque.
Installation instructions will no longer be shipped with unit delivery.
This document is available on our website in English and Chinese.
Factory calibration certificate is provided.
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
45738 Northport Loop West
Fremont, CA 94538
Tel: 1-800-767-1888
Fax: 1-510-498-1578
Sales: pfg.cs.amer@meas-spec.com
EUROPE
Measurement Specialties (Europe), Ltd.,
a TE Connectivity Company
26 Rue des Dames
78340 Les Clayes-sous-Bois, France
Tel: +33 (0) 130 79 33 00
Fax: +33 (0) 134 81 03 59
Sales: pfg.cs.emea@meas-spec.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
Sales: pfg.cs.asia@meas-spec.com
