U5300 Industrial Pressure Transducer SPECIFICATIONS Superior Accuracy and Total Error Band Instrument Grade and Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Absolute, Compound Expedite Configurations Available (10 Days) The instrument grade U5300 pressure transducers from the UltraStable line of MEAS, with their modular design, offer maximum flexibility for different configurations. This latest series features superior accuracy and total error band for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The wetted material is made of 316L stainless steel and the transducer's durability is excellent with no o-rings or organics exposed to the pressure media. The U5300 is weatherproof and exceeds the latest heavy industrial CE requirements including surge protection. The circuit is protected from reverse wiring at input and short circuit at output. This product is geared to the OEM customer for low to mid volumes. MEAS stands ready to provide a custom design of the U5300 where the volume and application warrants. Additional configurations not listed are either available or possible. Please inquire for further information. SENSOR SOLUTIONS ///U5300 02/2016 Page 1 U5300 Industrial Pressure Transducer FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output 0.1% Accuracy 0.5% Total Error Band Compact Outline -40C to +125C Operating Temperature Weatherproof APPLICATIONS Military/Aerospace Test Stands Automotive Test Stands Calibration Equipment High Accuracy Applications Stationary Motor Fuel Control High End Industrial Machinery STANDARD RANGES Range (psi) 0 to 005 0 to 015 0 to 030 0 to 050 0 to 100 Range (Bar) 0 to .35 0 to 001 0 to 002 0 to 3.5 0 to 007 0 to 010 0 to 200 0 to 300 0 to 020 0 to 500 0 to 035 0 to 01k 0 to 070 0 to 03k 0 to 200 0 to 05k 0 to 350 0 to 10k 0 to 700 Intermediate ranges available upon request. SENSOR SOLUTIONS ///U5300 Gage Sealed 02/2016 Absolute Compound Page 2 U5300 Industrial Pressure Transducer PERFORMANCE SPECIFICATIONS Ambient Temperature: 25C (unless otherwise specified) PARAMETERS MIN Accuracy (RSS of linearity, hysteresis, and repeatability) -0.1 Isolation, Body to any Lead 100 TYP Dielectric Strength Pressure Cycles MAX UNITS 0.1 %F.S. BFSL 2 1.00E+6 NOTES M @500VDC mA @500VAC, 1min 0~FS Cycles Proof Pressure 3X 20k psi Burst Pressure 4X 20k psi Rated Long Term Stability (1 year) -0.1 0.1 %F.S. Offset -0.25 0.25 %F.S. @25C Span -0.25 0.25 %F.S. @25C Total Error Band -0.5 0.5 %F.S. Over compensated temperature Compensated Temperature -20 +85 C Operating Temperature -40 +125 C Except cable 105C max Storage Temperature -40 +125 C Except cable 105C max Load Resistance (RL) RL > 100k Voltage Output Load Resistance (RL) < (Supply Voltage -9V) / 0.02A Current Consumption 5 Rated Current Output mA Voltage Output Rise Time (10% to 90%) <2ms (Voltage Output); <3ms (Current Output); Without Snubber Pressure Port Material 316L Stainless Steel; 316L Stainless Steel Snubber Shock 50g, 11msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A Vibration 20g, MIL-STD-810C, Procedure 514.2, Fig 514.2-2, Curve L For custom configurations, consult factory. Notes Compensated Temperature: The temperature range over which the product will produce an output proportional to pressure within the specified performance limits. Operating Temperature: The temperature range over which the product will produce an output proportional to pressure but may not remain within the specified performance limits. Storage Temperature: The temperature range over which the product can be stored safely in occasions without pressure applied or power input and remains rated performance. Beyond this temperature range may cause permanent damage to the product. All configurations are built with supply voltage reverse and output short-circuit protections. CE Compliance EN 55022 Emissions Class A & B IEC 61000-4-2 Electrostatic Discharge Immunity (8kV contact/15kV air) IEC 61000-4-3 Radiated, Radio-Frequency Electromagnetic Field Immunity (10V/m, 80M-1GHz) IEC 61000-4-4 Electrical Fast Transient Immunity (1kV) IEC 61000-4-5 Surge Immunity (V+ to V-: 2KV/42; L to Case: 1KV/12; V- to V0: 1KV/42) IEC 61000-4-6 Immunity to Conducted Disturbances Induced by Radio Frequency Fields (150K~80MHz, 10V level for voltage output models, 3V level for current output model) IEC 61000-4-9 Pulse Magnetic Field Immunity (100A/m peak) For all CE compliance tests, max allowed output deviation 1.5 %F.S. SENSOR SOLUTIONS ///U5300 02/2016 Page 3 U5300 Industrial Pressure Transducer DIMENSIONS [mm] 1 CODE CONNECTION TYPE DIM A 1 CABLE 2 FT 2.19 [55.6] E CABLE 3 FT 2.19 [55.6] 2 CABLE 4 FT 2.19 [55.6] 3 CABLE 10 FT 2.19 [55.6] 4 PACKARD CONNECTOR A 2.25 [57.2] 5 BAYONET CONNECTOR 2.11 [53.6] 6 FORM C 1.95 [49.5] 7 FORM A 2.10 [53.3] 9 PACKARD CONNECTOR B 2.25 [57.2] D M12 CONNECTOR 1.95 [49.5] M CABLE 1 M 2.19 [55.6] N CABLE 2 M 2.19 [55.6] P CABLE 5 M 2.19 [55.6] R CABLE 10 M 2.19 [55.6] A AMP CONNECTOR 2.10 [53.3] S SUMITOMO CONNECTOR 1.95 [49.5] C 1/2" NPT CONDUIT 2.10 [53.3] CODE 2 4 3 3 2 4 1 2 1 2 3 1/4-18 NPT 6 1/8-27 NPT B G1/4 JIS B2351 E 1/4-19 BSPT F 1/4-19 BSPP FEMALE (without snubber) P 7/16-20UNF FEMALE SAE J513 STRAIGHT THREAD WITH INTEGRAL VALVE DEPRESSOR N 7/16-20UNF FEMALE SAE J513 STRAIGHT THREAD Q M10 x 1.0 mm ISO 6149-2 S M12 x 1.5 mm ISO 6149-2 U G/14 DIN 3852 FORM E GASKET DIN3869-14 NBR W M20 x 1.5 mm ISO 6149-2 G M14 x 1.5 mm ISO 6149-2 1 2 3 Note: Refer to installation instructions supplied with devices for recommended torque SENSOR SOLUTIONS ///U5300 2 STRAIGHT THREAD ORING BUNA-N 90SH-904 5 3 123 PRESSURE PORT TYPE PORT DIM B 0.472 1/4-19 BSPP [11.94] 0.540 G3/8 JIS B2351 [13.72] 7/16-20UNF MALE SAE J19260.433 02/2016 DIM C REF. 0.366 [9.3] 0.366 [9.3] 0.366 [11.0] [9.3] 0.600 [15.24] 0.390 [9.91] 0.472 [11.94] 0.500 [12.7] 0.771 [19.58] 0.366 [9.3] 0.366 [9.3] 0.366 [9.3] 0.366 [9.3] 0.366 [9.3] 0.687 0.366 [17.5] [9.3] 0.687 [17.5] 0.374 [9.5] 0.433 [11.0] 0.472 [11.94] 0.551 [14.0] 0.433 [11.0] 0.366 [9.3] 0.366 [9.3] 0.366 [9.3] 0.445 [11.3] 0.366 [9.3] 0.366 [9.3] Page 4 U5300 Industrial Pressure Transducer WIRING CONNECTION Bayonet Current Output Wiring NC. PINS +SUPPLY -SUPPLY C,D,E A B Packard, A A B C Packard, B B A C Cable 1/2NPT CONDUIT RED RED BLK BLK M12 1 3 2,4 AMP/TE 1 2 3 FORM C 1 2 3,4 FORM A 1 2 3,4 Sum itom o 1 2 3 CONNECTION Bayonet Voltage Output Wiring +SUPPLY +OUTPUT COMMON A B C P REF VENT F Hole Through Connector Hole Through Connector In Cable In Cable Hole Through Connector Hole Through Connector Threads Through Connector Threads Through Connector Hole Through Connector NC. PINS D,E Packard, A A C B Packard, B B C A Cable 1/2NPT CONDUIT RED RED WHT WHT BLK BLK M12 1 2 3 AMP/TE 1 3 2 FORM C 1 2 3 4 FORM A 1 3 2 4 Sum itom o 1 3 2 4 P REF VENT F Hole Through Connector Hole Through Connector In Cable In Cable Hole Through Connector Hole Through Connector Threads Through Connector Threads Through Connector Hole Through Connector Notes: 1. 2. NC pins are reserved for factory use only. Customers should not use these connections. For cable connection, the drain wire is internally terminated to pressure port. SENSOR SOLUTIONS ///U5300 02/2016 Page 5 U5300 Industrial Pressure Transducer CONNECTION TYPES CONNECTION TYPES MATING HOUSING P/N PT06A-10-6S MIL-C-26482 12078090 MATING TERMINAL P/N 12103881, QTY 3 RUBBER SEAL P/N - 4-WIRE,22 AWG, SHIELDED, PVC JACKET, 105 DEGC - - - M12 BINDER SERIES 713, 09 3431 77 04 OR EQUIV 4-POS FEMALE CONNECTOR - - AMP/TE AMP / TE 3-PIN ECONOSEAL J SERIES 174357-2 & 174358-7 171630-1 (AWG 20~24) 171662-1 (AWG 16~20) QTY 3 172746-1 (AWG 20~24) 172888-2 (AWG 16~20) QTY 3 FORM C INDUSTRIAL STANDARD 9.4MM FORM C HIRSCHMANN 933 024-100,OR, ATAM KD046000B7 (SEAL INCL.) - HIRSCHMANN 730 185-002 FORM A DIN EN 175 301-803-A 18MM HIRSCHMANN 931 969-100,OR, ATAM KA245000B4 (SEAL INCL.) - HIRSCHMANN 730 801-002 6189-6907 8100-3067 (AWG 20~22) 8100-3068 (AWG 16~18) QTY 3 7165-1075 (INS. DIA 1.1~1.6MM) 7176-0621 (INS. DIA 1.6~1.9MM) 7165-0622 (INS. DIA 1.8~2.2MM) QTY 3 CONNECTION DESCRIPTION Bayonet Packard Cable & 1/2NPT Conduit BAYONET PTIH-10-6P OR EQUIV 3-PIN METRI-PACK 150 Sum itom o SUMITOMO 3-PIN HV040 Note: Transmitter of gage pressure type requires vent to atmosphere on the pressure reference side. This is accomplished via cable from the transmitter (the end of the cable should be terminated to clean and dry area) or through the customer mating connector/cable assembly which has internal vent path. Suggested vented M12 mating connector P/N MB12FWAFF04ST-4 and MB12FWAFF04ST-3 at www.finecables.com for 0.157"~0.236" and 0.236"~0.315" diameter cable respectively. WEATHERPROOF WEATHER-PROOF RATING CONNECTION IP CODE Bayonet IP67 Packard IP66 Cable IP67 1/2NPT CONDUIT IP67 M12 IP67 AMP/TE IP67 FORM C IP65 FORM A IP65 Sum itom o IP67 Note: Weatherproof ratings are met when the mating connectors are installed properly and the cable termination is to dry and clean area. OUTPUTS CODE 3 4 5 6 7 8 9 SENSOR SOLUTIONS ///U5300 OUTPUT SIGNAL 0.5 - 4.5V RATIOMETRIC 1 - 5V 4 - 20mA 0 - 5V 0 - 10V 1 - 6V 0.5 - 4.5V SUPPLY VOLTAGE 5 0.25V PROTECTED to 30V 8 - 30V 9 - 30V 8 - 30V 12 - 30V 8 - 30V 5 - 30V 02/2016 Page 6 U5300 Industrial Pressure Transducer ORDERING INFORMATION U53 3 1 - 0 0 00 0 5 - 100P G Model Output Signal Connection Type - Shipping Snubber 00 Label Pressure Port - Pressure Range Pressure Type 1 = Cable 2 ft E = Cable 3 ft 2 = Cable 4 ft 3 = Cable 10 ft 4 = Packard Connector A 5 = Bayonet Connector 6 = Form C 7 = Form A 9 = Packard Connector B D = M12 Connector M = Cable 1 m N = Cable 2 m P = Cable 5 m R = Cable 10 m A = Amp Connector S = Sumitomo Connector C = 1/2" NPT Conduit - 0 = Standard H = Expedite 0 = No Snubber 1 = With Snubber 00 0 = Adhesive Label 1 = Laser Marking U53 3 = 0.5 - 4.5V Ratiometric 4 = 1 - 5V 5 = 4 - 20mA 6 = 0 - 5V 7 = 0 - 10V 8 = 1 - 6V 9 = 0.5 - 4.5V 2 = 1/4-19 BSPP 3 = G3/8 JIS B2351 4 = 7/16-20UNF Male SAE J514 Straight Thread ORing BUNA-N 90SH904 5 = 1/4-18 NPT 6 = 1/8-27NPT B = G1/4 JIS B2351 E = 1/4-19 BSPT F = 1/4-19 BSPP Female P = 7/16-20UNF Female SAE J514 with Integral Valve Depressor Q = M10 x 1.0 mm ISO 6149-2 N = 7/16-20UNF Female SAE J513 Straight Thread S = M12 x 1.5 mm ISO 6149-2 U = G1/4 DIN 3852 Form E Gasket DIN3869-14 NBR W = M20 x 1.5 mm ISO 6149-2 G = M14 x 1.5 mm ISO 6149-2 - 002P 005P .14B .35B G = Gage S = Sealed A = Absolute C = Compound 015P 030P 050P 100P 001B 002B 3.5B 007B 010B G = Gage S = Sealed A = Absolute C = Compound 200P 300P 500P 020B 035B 01KP 03KP 05KP 10KP 070B 200B 350B 700B G = Gage S = Sealed (Port 2, 5 only) A = Absolute (Port 2, 5 only) C = Compound Note: Selections in blue (expedite) have a 10 business day lead time with a 19 piece maximum order. Compound pressure range is -14.7 to xxxpsig or -1 to xxxbarg. (e.g. 200PC: -14.7 to 200psig, 020BC: -1 to 20barg) Refer to online installation instruction for recommended torque. Installation instructions will no longer be shipped with unit delivery. This document is available on our website in English and Chinese. Factory calibration certificate is provided. NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity Company 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd., a TE Connectivity Company 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com Measurement Specialties (China), Ltd., a TE Connectivity Company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity`s obligations shall only be as set forth in TE Connectivity`s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. (c) 2015 TE Connectivity Ltd. family of companies SENSOR SOLUTIONS ///U5300 All Rights Reserved. 02/2016 Page 7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: U5374-000005-015PG