BAND (SUPPLIED FLAT) 3 8 (SEE PART NUMBER BREAKDOWN FOR OPTIONS) CODE 40 - BANDING BACKSHELL BNX40AB00-1608 -S SERIES BNX - BAND STRAP NOT INCLUDED BND - BAND STRAP INCLUDED (SEE BAND TERMINATION CONFIGURATION) CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-016 FINISH REFER TO CH00-0250-016 ANGLE ORDER NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) BAND TERMINATION CONFIGURATION 3 8 V - ONE STEP STANDARD BAND W - ONE STEP MICROBAND U - TWO STEP STANDARD BAND FOR BNX, LEAVE BLANK OPTION FIELD SEPARATOR MODIFICATION CODE REFER TO CH00-0250-016 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD BY MEANS OF A BAND STRAP AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-016. 3. SEE DRAWING BND-XXXXX FOR MORE INFORMATION. 4. BACKSHELL TO BE PERMANENTLY MARKED WITH CODE IDENTIFICATION NUMBER AND FULL BASIC PART NUMBER (e.g. 06090-BND40AB00-1814). BACKSHELL TO BE MARKED WITH "BND" EVEN IF NO BAND IS ORDERED. THE BAND TERMINATION CONFIGURATION CODE IS FOR ORDERING INFORMATION ONLY AND IS NOT A PART MARKING REQUIREMENT. 5. ALL ENTRY SIZES ARE SHOWN IN TABLE 2. MAXIMUM ENTRY SIZES ARE SHOWN IN TABLE 1. IF MAX ENTRY IS EXCEEDED, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. SEE CH00-0250-016 FOR FURTHER DETAILS. 6. BACKSHELL MATES TO MIL-DTL-38999, SERIES III AND IV, CLASS C, F, K, AND W, D38999/20, /24, /26, /40, /46 AND /47 CONNECTORS, AND WHEN SO MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PARA. 3. 5. 7. 7. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED 8. V AND U BANDS ARE SUITABLE FOR ENTRY SIZES 03-24, W IS SUITABLE FOR ENTRY SIZES 03-12 ONLY. CONTACT FACTORY FOR BAND OPTIONS ON LARGER ENTRY SIZES. DRAWN K.WINCZURA DATE CHECKED 01/12/2014 APPROVED K.SHEPPARD 08/12/2014 APPROVED H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 01/12/2014 10/08/2015 REVISIONS LTR DESCRIPTION F REVISED PER ECO-15-010973 G REVISED PER ECO-15-016545 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1 DATE APPROVED 10/08/2015 17/11/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 H.SMITH TITLE: BANDING BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES III & IV TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT BND40 G 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 30,00 16,80 0,50 30,00 18,00 SILICONE O-RING 3,50 XXXX OB A THREAD OY OS OZ XXXX OB A THREAD OK 13,00 PART MARK HERE PART MARK HERE STRAIGHT BACKSHELL - TYPE 1 5 STRAIGHT BACKSHELL - TYPE 2 16,80 0,50 C F D G 45 BACKSHELL - TYPE 2 45 BACKSHELL - TYPE 1 W H 16,80 0,50 M J E T 90 BACKSHELL - TYPE 1 H W 16,80 0,50 M E J T 90 BACKSHELL - TYPE 2 DRAWN K.WINCZURA DATE 01/12/2014 APPROVED K.SHEPPARD 08/12/2014 H.SMITH 3RD ANGLE PROJECTION NOT TO SCALE 01/12/2014 CHECKED APPROVED 90 BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE 10/08/2015 REVISIONS DESCRIPTION LTR F REVISED PER ECO-15-010973 G REVISED PER ECO-15-016545 UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1 DATE APPROVED 10/08/2015 17/11/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 H.SMITH 90 BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: BANDING BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES III & IV TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT BND40 G 2 MODIFICATION S (SELF-LOCKING COUPLING NUT) 21,60 0,50 SELF-LOCKING MECHANISM OB 7 BACKSHELL - TYPE 1 TABLE 1 ORDER NUMBER 08 10 12 14 16 18 20 22 24 BACKSHELL - TYPE 2 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE SHELL SIZE A THREAD COM'L / MIL 9/A M12 x 1.0 M15 x 1.0 11 / B M18 x 1.0 13 / C 15 / D M22 x 1.0 M25 x 1.0 17 / E 19 / F M28 x 1.0 21 / G M31 x 1.0 23 / H M34 x 1.0 25 / J M37 x 1.0 TABLE 2 ENTRY SIZE 03 04 05 06 07 08 09 10 11 12 13 14 15 16 18 20 22 24 26 8 28 8 30 8 32 8 34 8 DRAWN K.WINCZURA OZ MIN 4,7 6,3 7,9 9,5 11,1 12,7 14,2 15,8 17,4 19,0 20,6 22,2 23,8 25,4 28,6 31,8 35,0 38,1 41,3 44,5 47,6 50,8 54,0 OS MAX 7,8 9,4 11,0 12,5 14,1 15,7 17,3 18,8 20,5 22,0 23,6 25,2 26,8 28,4 30,0 34,8 38,0 41,1 44,3 47,5 50,7 53,8 57,0 DATE OB MAX 7 21,5 24,6 28,3 32,4 35,6 38,5 41,7 43,9 47,0 APPROVED K.SHEPPARD 08/12/2014 10/08/2015 REVISIONS DESCRIPTION LTR F REVISED PER ECO-15-010973 G REVISED PER ECO-15-016545 OY MAX 14,0 14,0 15,5 17,2 18,7 20,3 21,9 23,5 25,1 26,7 28,3 29,9 31,5 33,1 36,3 39,5 42,7 45,9 49,1 52,3 55,6 58,5 61,8 3RD ANGLE PROJECTION NOT TO SCALE 01/12/2014 01/12/2014 H.SMITH OB MAX 18,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 MAX ENTRY 04 07 09 10 12 14 16 18 20 C 0,5 12,0 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 D 0,5 25,1 26,2 26,6 27,5 28,3 28,8 29,7 30,0 30,9 W 0,5 21,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 T 0,5 14,0 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 E 0,5 30,0 32,0 33,5 35,4 36,7 38,3 40,0 41,6 43,0 W 0,5 21,2 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 T 0,5 16,3 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 E 0,5 29,0 31,2 33,0 34,9 35,5 37,2 38,7 40,2 44,9 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE CHECKED APPROVED SELF-LOCKING MECHANISM A THREAD OK 7 A THREAD OB 7 SELF-LOCKING MECHANISM UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1 DATE APPROVED 10/08/2015 17/11/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 H.SMITH OK MAX NA NA 21,0 21,0 21,0 24,5 24,5 29,0 32,5 32,5 35,5 35,5 37,0 37,0 40,0 43,5 48,5 52,1 56,6 63,0 75,5 75,5 75,5 OK MAX 7 NA NA 24,6 24,6 24,6 28,3 28,3 32,4 35,6 35,6 38,5 38,5 41,7 41,7 43,9 47,0 50,0 56,0 61,3 64,5 80,2 80,2 80,2 F 0,5 NA NA 12,5 12,5 12,5 13,1 13,1 13,5 14,5 14,5 15,5 15,5 16,1 16,1 16,5 17,0 18,5 21,9 25,7 26,9 29,2 29,2 29,2 G 0,5 NA NA 26,2 26,2 26,2 26,6 26,6 27,5 28,3 28,3 28,8 28,8 29,7 29,7 30,0 30,9 31,3 32,8 32,8 33,8 34,4 34,4 34,4 H 0,5 NA NA 24,0 24,0 24,0 27,0 27,0 31,0 34,0 34,0 35,0 35,0 38,0 38,0 42,0 45,0 54,5 58,0 62,5 65,5 69,0 72,0 75,5 M 0,5 NA NA 15,5 15,5 15,5 17,0 17,0 19,5 21,0 21,0 20,0 20,0 21,5 21,5 24,0 25,5 31,0 33,0 35,0 34,5 36,0 37,5 39,0 J 0,5 NA NA 32,0 32,0 32,0 33,5 33,5 35,4 36,7 36,7 38,3 38,3 40,0 40,0 41,6 43,0 45,1 51,1 51,1 54,1 57,4 57,4 57,4 H 0,5 NA NA 24,3 24,3 24,3 28,3 28,3 31,1 34,2 34,2 38,5 38,5 40,7 40,7 43,7 46,4 50,0 53,5 58,0 61,0 64,5 67,5 71,0 M 0,5 NA NA 17,2 17,2 17,2 19,4 19,4 21,0 22,8 22,8 25,3 25,3 26,1 26,1 27,6 29,1 31,0 33,0 35,0 34,5 36,0 37,5 39,0 J 0,5 NA NA 31,2 31,2 31,2 33,0 33,0 34,9 35,5 35,5 37,2 37,2 38,7 38,7 40,2 44,9 45,1 51,1 51,1 54,1 57,4 57,4 57,4 TITLE: BANDING BACKSHELL ASSY USED ON: MIL-DTL-38999 SERIES III & IV TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT BND40 G 3