FUJITSU MEDIA DEVICE DATA SHEET DS04-23122-4E ASSP Mobile Communication Systems Piezoelectric SAW BPF (700 to 1700MHz) F5CP/F6CP Series (D2 type) DESCRIPTION The F5CP/F6CP series of SAW band pass filters have 2.5 mm x 2.0 mm x 0.9 mm (h) of ultra small package, which are available in the 700 to 2000 MHz frequency range. They exhibit high stability by using single crystal, Lithium Tantalate (LiTaO3) with a large electro-mechanical coefficient. Typical applications for the F5CP/F6CP series include RF interstage filtering in mobile communications systems. Standard devices are available for AMPS, GSM, EGSM, PDC800, PDC1.5G. FEATURES * Ultra compact and light package (2.5 mm x 2.0 mm x 0.9 mm (h) *) *: 1.0 mm height maximum * Excellent stop band attenuation * External matching are not required (50 I/O) * Standard devices are available for mobile communication standards PACKAGE F5CP/F6CP Series PIN ASSIGNMENT (BOTTOM VIEW) 1 2 4 3 PIN DESCRIPTION 2 Pin No. Symbol Descriptions 1 IN 2 GND Ground pin 3 OUT Output pin 4 GND Ground pin Input pin F5CP/F6CP Series ABSOLUTE MAXIMUM RATINGS Parameter Symbol Ambient operating temperature Storage temperature F5CP Series Input power Rating Max. Ta -30 +85 C Tstg -40 +100 C +15 dBm +10 dBm -5 +5 V Pin F6CP Series Input DC voltage Unit Min. WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. RECOMMENDED OPERATING CONDITIONS Parameter Value Symbol Operating temperature Ta Min. Max. -30 +85 Unit C WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating conditionranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand. STANDARD DEVICES Center Band width frequency (MHz) (MHz) System PDC800 AMPS/CDMA/ TDMA GSM EGSM PDC1.5G Part symbol Part number TX 950.0 20 9 FAR-F5CP-950M00-D209 RX 820.0 20 2 FAR-F5CP-820M00-D202 TX 836.5 25 3 FAR-F5CP-836M50-D203 RX 881.5 25 4 FAR-F5CP-881M50-D204 TX 902.5 25 5 FAR-F5CP-902M50-D205 RX 947.5 25 6 FAR-F5CP-947M50-D206 RX 942.5 35 1 FAR-F5CP-942M50-D201 TX 1441.0 24 7 FAR-F6CP-1G4410-D207 R FAR-F6CP-1G4410-D20R RX 1489.0 24 8 FAR-F6CP-1G4890-D208 Remarks 3 F5CP/F6CP Series ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE 1. SYSTEM : PDC800-Tx PART NUMBER : FAR-F5CP-950M00-D209 Parameter Value Conditions Min. Typ. Max. Unit Insertion loss 940 to 960 MHz 3.1 3.5 dB In-band ripple 940 to 960 MHz 0.8 1.2 dB DC to 830 MHz 45 52 dB 1015 to 1106 MHz 35 42 dB 1106 to 1700 MHz 45 55 dB 1700 to 2000 MHz 40 48 dB 940 to 960 MHz (8.1) 2.1 (9.0) 2.3 () (dB) 1U FS 1 : 51.404 Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ 1 : -2.8224 dB 940 MHz REF 0 dB 1 S11 -11.736 14.426 pF 940 MHz 2 : 65.227 -15.25 960 MHz 2 : -2.672 dB 960 MHz 3 : -55.793 dB 830 MHz 4 : -43.18 dB 1.015 GHz 2 Remarks 3 : 3.3965 -52.201 830 MHz 4 : 13.656 -85.102 1.015 GHz 1 4 2 3 4 SPAN 300 MHz CENTER 950 MHz S11 SWR 1/ REF 1 3 4 1 : 1.2627 940 MHz 3 CENTER 950 MHz S22 1U FS 1 : 48.162 SPAN 300 MHz -11.197 15.121 pF 940 MHz 2 : 62.332 -11.52 960 MHz 2 : 1.4555 960 MHz 3 : 30.774 830 MHz 4 : 14.488 1.015 GHz 3 : 3.3203 -51.557 830 MHz 4 : 14.066 -83.52 1.015 GHz 1 2 1 CENTER 950 MHz 4 4 2 SPAN 300 MHz CENTER 950 MHz 3 SPAN 300 MHz F5CP/F6CP Series 2. PDC800-RX PART NUMBER : FAR-F5CP-820M00-D202 Parameter Value Conditions Min. Typ. Max. Unit Insertion loss 810 to 830 MHz 2.6 3.3 dB In-band ripple 810 to 830 MHz 0.8 1.5 dB DC to 760 MHz 45 52 dB 855 to 875 MHz 28 30 dB 875 to 920 MHz 35 38 dB 920 to 1200 MHz 45 55 dB 1200 to 2000 MHz 40 47 dB 810 to 830 MHz (8.5) 2.0 (9.5) 2.2 () (dB) Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 1 : -2.4056 dB 810 MHz S11 1U FS 1 : 50.861 -8.7852 22.366 pF 810 MHz 2 : 88.93 5.2227 830 MHz 2 : -2.5113 dB 830 MHz 3 : -56.9 dB 760 MHz 4 : -31.782 dB 855 MHz 2 Remarks 3 : 4.5723 -48.232 760 MHz 4 4 : 22.301 -121.53 855 MHz 1 2 3 4 SPAN 300 MHz CENTER 820 MHz S11 SWR 1/ REF 1 4 3 1 : 1.1966 810 MHz CENTER 820 MHz S22 1U FS 3 SPAN 300 MHz 1 : 51.545 -8.2246 23.89 pF 810 MHz 2 : 86.727 6.6094 830 MHz 2 : 1.7897 830 MHz 3 : 21.137 760 MHz 4 : 15.897 855 MHz 3 : 4.5059 -47.348 760 MHz 4 : 22.906 -119.41 855 MHz 1 2 4 1 CENTER 820 MHz 2 SPAN 300 MHz CENTER 820 MHz 3 SPAN 300 MHz 5 F5CP/F6CP Series 3. SYSTEM : AMPS-Tx PART NUMBER : FAR-F5CP-836M50-D203 Parameter Value Conditions Min. Typ. Max. Unit Insertion loss 824 to 849 MHz 3.0 3.5 dB In-band ripple 824 to 849 MHz 1.1 1.6 dB DC to 800 MHz 45 50 dB 869 to 1049 MHz 29 35 dB 1049 to 2000 MHz 45 50 dB 824 to 849 MHz (8.5) 1.9 (10.2) 2.2 () (dB) Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 1 : -2.8742 dB 824 MHz S11 1U FS 1 : 38.709 0.1641 31.689 pH 824 MHz 2 : 70.559 -11.789 849 MHz 2 : -2.7828 dB 849 MHz 3 : -51.439 dB 800 MHz 4 : -34.045 dB 869 MHz 2 Remarks 3 : 2.6631 -30.007 800 MHz 4 : 13.117 -138.59 869 MHz 1 4 2 3 4 SPAN 300 MHz CENTER 835 MHz S11 SWR 1/ REF 1 4 3 1 : 1.2937 824 MHz 3 CENTER 835 MHz S22 1U FS SPAN 300 MHz 1 : 38.223 1.1992 231.63 pH 824 MHz 2 : 70.09 -9.5508 849 MHz 2 : 1.4867 849 MHz 3 : 25.566 800 MHz 4 : 33.367 869 MHz 3 : 2.4951 -30.189 800 MHz 4 : 13.344 -140.89 869 MHz 1 2 4 1 CENTER 835 MHz 6 2 SPAN 300 MHz 3 CENTER 835 MHz SPAN 300 MHz F5CP/F6CP Series 4. SYSTEM : AMPS-Rx PART NUMBER : FAR-F5CP-881M50-D204 Parameter Value Conditions Min. Typ. Max. Unit Insertion loss 869 to 894 MHz 2.9 3.5 dB In-band ripple 869 to 894 MHz 1.0 1.6 dB DC to 779 MHz 45 50 dB 779 to 849 MHz 40 47 dB 914 to 970 MHz 28 33 dB 970 to 1049 MHz 50 60 dB 1049 to 2000 MHz 40 50 dB 869 to 894 MHz (8.5) 1.9 (10.2) 2.2 () (dB) Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 1 : -2.8617 dB 869 MHz S11 1U FS 1 : 52.887 -4.0195 45.564 pF 869 MHz 2 : 80.242 -14.598 894 MHz 2 : -3.0293 dB 894 MHz 3 : -56.249 dB 849 MHz 4 : -33.517 dB 914 MHz 2 Remarks 3 : 2.4668 -22.392 849 MHz 4 : 12.961 -142.84 914 MHz 1 4 2 3 4 3 SPAN 300 MHz CENTER 880 MHz S11 SWR 1/ REF 1 3 4 1 : 1.1015 869 MHz CENTER 880 MHz S22 1U FS SPAN 300 MHz 1 : 54.602 1.627 297.97 pH 869 MHz 2 : 80.621 -8.7813 894 MHz 2 : 1.6896 894 MHz 3 : 24.367 849 MHz 4 : 35.586 914 MHz 3 : 2.5654 -22.138 849 MHz 4 : 15.594 -156.26 914 MHz 1 2 4 3 1 CENTER 880 MHz 2 SPAN 300 MHz CENTER 880 MHz SPAN 300 MHz 7 F5CP/F6CP Series 5. SYSTEM : GSM-Tx PART NUMBER : FAR-F5CP-902M50-D205 Parameter Value Conditions Min. Typ. Max. Unit Insertion loss 890 to 915 MHz 3.0 3.5 dB In-band ripple 890 to 915 MHz 1.1 1.6 dB DC to 845 MHz 45 50 dB 845 to 870 MHz 30 46 dB 925 to 935 MHz 7 16 dB 935 to 980 MHz 28 33 dB 980 to 1200 MHz 50 60 dB 1200 to 3000 MHz 30 40 dB 890 to 915 MHz (9.0) 1.7 (11.7) 2.1 () (dB) Absolute attenuation In-Band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 2 4 5 1 : -2.7524 dB 890 MHz S11 1 : 41.604 1U FS Remarks -1.2832 139.36 pF 890 MHz 2 : 77.059 -9.8828 915 MHz 2 : -2.6529 dB 915 MHz 3 : -55.923 dB 870 MHz 4 : -14.643 dB 925 MHz 5 : -32.307 dB 935 MHz 3 : 2.9404 -26.104 870 MHz 1 4 4 : 446.91 298.7 925 MHz 5 : 18.18 -155.7 935 MHz 2 3 5 3 SPAN 300 MHz CENTER 900 MHz S11 SWR 1/ REF 1 4 5 3 1 : 1.2064 890 MHz CENTER 900 MHz S22 SPAN 300 MHz 1 : 40.996 1U FS -1.9941 89.676 pF 890 MHz 2 : 77.371 -7.6758 915 MHz 2 : 1.584 915 MHz 3 : 21.644 870 MHz 4 : 13.206 925 MHz 5 : 29.787 935 MHz 3 : 3.0254 -25.578 870 MHz 1 4 4 : 502.38 264.7 925 MHz 5 : 17.695 -150.65 935 MHz 2 5 3 1 CENTER 900 MHz 8 2 SPAN 300 MHz CENTER 900 MHz SPAN 300 MHz F5CP/F6CP Series 6. SYSTEM : GSM-Rx PART NUMBER : FAR-F5CP-947M50-D206 Parameter Value Conditions Min. Typ. Max. Unit Insertion loss 935 to 960 MHz 3.1 3.5 dB In-band ripple 935 to 960 MHz 1.3 1.5 dB DC to 871 MHz 45 50 dB 890 to 915 MHz 30 45 dB 980 to 1025 MHz 25 30 dB 1025 to 2000 MHz 45 48 dB 2000 to 3000 MHz 30 33 dB 935 to 960 MHz (8.1) 2.1 (9.0) 2.3 () (dB) Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 1 : -2.9325 dB 935 MHz S11 1 : 46.617 1U FS -4.2656 39.905 pF 935 MHz 2 : 72.273 -12.234 960 MHz 2 : -2.8297 dB 960 MHz 3 : -45.716 dB 915 MHz 4 : -30.562 dB 980 MHz 2 Remarks 3 : 3.1875 -19.772 915 MHz 4 4 : 18.07 -157.97 980 MHz 1 2 3 4 3 SPAN 300 MHz CENTER 950 MHz S11 SWR 1/ REF 1 3 4 1 : 1.1193 935 MHz CENTER 950 MHz S22 1U FS SPAN 300 MHz 1 : 47.164 -1.9922 85.443 pF 935 MHz 2 : 72.879 -7.1406 960 MHz 2 : 1.5219 960 MHz 3 : 18.194 915 MHz 4 : 30.704 980 MHz 3 : 3.4033 -19.452 915 MHz 4 : 20.859 -170.99 980 MHz 1 2 4 3 1 CENTER 950 MHz 2 SPAN 300 MHz CENTER 950 MHz SPAN 300 MHz 9 F5CP/F6CP Series 7. SYSTEM : EGSM-Rx PART NUMBER : FAR-F5CP-942M50-D201 Parameter Value Conditions Min. Typ. Max. Unit Insertion loss 925 to 960 MHz 3.9 4.8 dB In-band ripple 925 to 960 MHz 2.0 2.9 dB DC to 871 MHz 45 53 dB 890 to 915 MHz 15 20 dB 980 to 1025 MHz 25 29 dB 1025 to 2000 MHz 40 50 dB 2000 to 3000 MHz 25 36 dB 925 to 960 MHz (6.0) 2.4 (7.7) 3.0 () (dB) 1U FS 1 : 24.956 Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 1 : -3.8751 dB 925 MHz S11 -11.556 3 : 7.0146 -10.637 915 MHz 4 : 15.141 -142.4 980 MHz 4 3 14.89 pF 925 MHz 2 : 59.1 -2.7793 960 MHz 2 : -2.9443 dB 960 MHz 3 : -33.524 dB 915 MHz 4 : -32.697 dB 980 MHz 2 Remarks 1 2 3 4 SPAN 300 MHz CENTER 950 MHz S11 SWR 1/ REF 1 4 1 : 2.1506 925 MHz CENTER 950 MHz S22 1U FS SPAN 300 MHz 1 : 25.901 -15.088 2 : 56.229 -7.6113 960 MHz 2 : 1.1932 960 MHz 3 : 7.4697 915 MHz 4 : 30.348 980 MHz 3 11.404 pF 925 MHz 3 : 8.3276 -8.667 915 MHz 4 : 13.266 -131.7 980 MHz 1 2 3 1 CENTER 950 MHz 10 4 2 SPAN 300 MHz CENTER 950 MHz SPAN 300 MHz F5CP/F6CP Series 8. SYSTEM : PDC1.5G-Tx PART NUMBER : FAR-F6CP-1G4410-D207 Parameter Value Conditions Min. Typ. Max. Unit Insertion loss 1429 to 1453 MHz 3.5 3.8 dB In-band ripple 1429 to 1453 MHz 1.3 1.6 dB DC to 1380 MHz 40 45 dB 1477 to 1501 MHz 25 28 dB 1501 to 1607 MHz 28 30 dB 1607 to 1900 MHz 45 55 dB 1900 to 3000 MHz 30 33 dB 1429 to 1453 MHz (7.0) 2.4 (7.7) 2.6 () (dB) 1U FS 1 : 39.924 Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 2 4 1 : -2.6466 dB 1.429 GHz S11 Remarks 0.0859 9.5712 pH 1.429 GHz 2 : 66.582 -14.813 1.453 GHz 2 : -2.8931 dB 1.453 GHz 3 : -48.237 dB 1.38 GHz 4 : -30.021 dB 1.477 GHz 5 : -61.614 dB 1.607 GHz 3 : 3.9805 -24.466 1.38 GHz 4 : 15.57 -133.34 1.477 GHz 1 5 : 7.3418 -55.936 1.607 GHz 2 3 5 4 3 SPAN 400 MHz CENTER 1 450 MHz S11 SWR 1/ REF 1 3 4 5 CENTER 1 450 MHz S22 SPAN 400 MHz 1 : 39.836 1U FS 5 1 : 1.2523 1.429 GHz 2 : 1.4666 1.453 GHz 3 : 15.581 1.38 GHz 4 : 26.309 1.477 GHz 5 : 15.408 1.607 GHz 0.4395 48.944 pH 1.429 GHz 2 : 67.617 -12.059 1.453 GHz 3 : 4.1484 -25.398 1.38 GHz 4 : 23.188 -166.48 1.477 GHz 1 5 : 8.541 -61.674 1.607 GHz 2 4 1 CENTER 1 450 MHz 3 2 5 SPAN 400 MHz CENTER 1 450 MHz SPAN 400 MHz 11 F5CP/F6CP Series 9. SYSTEM : PDC1.5G-Tx PART NUMBER : FAR-F6CP-1G4410-D20R Parameter Value Conditions Min. Typ. Max. Unit Insertion loss 1429 to 1453 MHz 2.5 3.0 dB In-band ripple 1429 to 1453 MHz 0.8 1.4 dB DC to 1380 MHz 40 45 dB 1477 to 1501 MHz 20 32 dB 1501 to 1607 MHz 28 32 dB 1607 to 1900 MHz 45 51 dB 1900 to 3000 MHz 30 45 dB 1429 to 1453 MHz (7.4) 1.7 (11.7) 2.5 () (dB) Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 2 3 4 5 1 1 : -49.815 dB 1.38 GHz S11 1 : 3.01006 1U FS -30.558 2 : -2.4229 dB 1.429 GHz 3 : -2.5064 dB 1.453 GHz 4 : -32.603 dB 1.477 GHz 5 : -33.819 dB 1.501 GHz Remarks 3.7742 pF 1.38 GHz CH1 Markers 2 : 39.143 -3.5684 1.429 GHz 3 : 60.367 -10.139 1.453 GHz 4 : 16.492 -154.35 1.477 GHz 2 5 : 14.699 -81.426 1.501 GHz 3 4 1 5 SPAN 400 MHz CENTER 1 450 MHz S11 SWR 1 1/ REF 1 4 5 CENTER 1 450 MHz S22 SPAN 400 MHz 1 : 3.1895 1U FS 1 : 22.149 1.38 GHz 2 : 1.2938 1.429 GHz 3 : 1.3010 1.453 GHz 4 : 32.211 1.477 GHz 5 : 12.634 1.501 GHz -31.245 3.6911 pF 1.38 GHz 2 : 39.359 -3.7520 1.429 GHz 3 : 62.402 -5.4785 1.453 GHz 4 : 17.336 -161.48 1.477 GHz 2 5 : 16.094 -84.156 1.501 GHz 3 4 1 5 CENTER 1 450 MHz 12 2 3 SPAN 400 MHz CENTER 1 450 MHz SPAN 400 MHz F5CP/F6CP Series 10. SYSTEM : PDC1.5G-Rx PART NUMBER : FAR-F6CP-1G4890-D208 Parameter Value Conditions Min. Typ. Max. Unit Insertion loss 1477 to 1501 MHz 3.6 4.0 dB In-band ripple 1477 to 1501 MHz 1.3 1.7 dB DC to 1370 MHz 45 50 dB 1370 to 1429 MHz 40 45 dB 1429 to 1453 MHz 15 30 dB 1542 to 1566 MHz 28 30 dB 1566 to 1607 MHz 28 30 dB 1607 to 1900 MHz 40 45 dB 1900 to 3000 MHz 30 35 dB 1477 to 1501 MHz (6.8) 2.5 (7.4) 2.7 () (dB) Absolute attenuation In-band VSWR (Return loss) S21 log MAG 10 dB/ REF 0 dB 1 2 4 1 : -3.367 dB 1.477 GHz S11 1U FS 1 : 39.094 -17.623 Remarks 6.1145 pF 1.477 GHz 2 : 52.408 -29.346 1.501 GHz 2 : -3.1358 dB 1.501 GHz 3 : -44.243 dB 1.453 GHz 4 : -35.072 dB 1.542 GHz 5 : -64.128 dB 1.607 GHz 3 : 7.6753 -6.7566 1.453 GHz 4 : 10.273 -111.5 1.542 GHz 5 : 7.4102 -67.687 1.607 GHz 1 3 3 2 5 4 SPAN 400 MHz CENTER 1 500 MHz S11 SWR 1/ REF 1 4 1 : 1.5913 5 1.477 GHz 5 CENTER 1 500 MHz S22 1U FS SPAN 400 MHz 1 : 42.766 -19.346 2 : 54.113 -28.582 1.501 GHz 2 : 1.7639 1.501 GHz 3 : 6.6353 1.453 GHz 4 : 29.248 1.542 GHz 5 : 19.199 1.607 GHz 3 3 : 7.5981 -7.1064 1.453 GHz 4 : 12.152 -125.3 1.542 GHz 5 : 8.4102 -73.254 1.607 GHz 1 3 2 4 1 5 2 CENTER 1 500 MHz 5.57 pF 1.477 GHz SPAN 400 MHz CENTER 1 500 MHz SPAN 400 MHz 13 F5CP/F6CP Series MEASUREMENT CIRCUIT Network Analyzer Network Analyzer 1 3 Filter 50 50 2, 4 1 to 4 : Pin numbers PART NUMBER DESIGNATION [Designation example] FAR-F5CP(1) (2) -D2 (3) (4) (5) (1) Frequency range (2) (3) (4) (5) 5 : 700 to 1000 MHz 6 : 1000 to 1700 MHz Package size P : 2.5 mm x 2.0 mm x 0.9 mm Frequency This specifies the nominal center frequency using six alphanumeric. M (for MHz) or G (for GHz) indicates the decimal point. [Example] 836.5 MHz 836M50 1.441 GHz 1G4410 Part symbol Numbers specified by Fujitsu Refer to STANDARD DEVICES Packing (Reeled tape) K : 1000 pcs / reel J : 5000 pcs / reel MARKING Production date (EIAJ) Part symbol INDEX 14 Lot Code F5CP/F6CP Series 0.63 0.10 PACKAGE DIMENSIONS 0.88 0.10 0.9 0.10 2.5 0.10 0.5 Min. 4 2.0 0.10 3 (C 030) INDEX 2 1 4 - R0.18 0.5 Min. Dimensions in mm. 0.5 0.88 0.5 0.88 RECOMMENDED FOOT PATTERN ON PCB 0.8 1.2 1.2 0.5 Dimensions in mm. 15 F5CP/F6CP Series PACKING (1) Reel dimensions 1.5 Min. 20.2 Min. 250.0 80.0 12.8 Min. R0.58 9.5 0.5 13.8 Max. Type Volume K 1000 pcs. J 5000 pcs. Dimensions in mm. (2) Packing style Pulling side Reel side Pulling side 16 #1 PIN F5CP/F6CP Series 4.0 0.1 2.8 0.1 3.5 0.05 2.0 0.05 1.0 Min. 4.0 0.1 0.3 0.05 8.0 0.2 +0.1 1.5 -0.0 1.75 0.1 (3) Tape dimensions +0.1 1.0 -0.0 2.3 0.1 Dimensions in mm. (4) Peel strength of top cover tape Peel off by the force of 0.1 N to 1.0 N under the condition at the right . (Conforms to EIA) Direction of pulling Speed 300 mm/min 165 to 180 Embossment carrier type tape 17 F5CP/F6CP Series RECOMMENDED REFLOW PROFILE 240 10 s Temperature (C) Heating rate 1 to 4 C/s 210 Air cooling 60 s Pre-Heating 150 60 90 s Time (s) NOTE Mass-produced product order is accepted by a unit of 1000. 18 F5CP/F6CP Series FUJITSU MEDIA DEVICES LIMITED For further information please contact: Japan FUJITSU MEDIA DEVICE LIMITED International Sales & Marketing DEPT. Shin-Yokohama Square Bldg.,14F, Shin-yokohama 2-3-12, Kohoku-ku, Yokohama, Kanagawa 222-0033, Japan Tel: +81-45-471-0061 Fax: +81-45-471-0076 http://edevice.fujitsu.com/fmd/ North and South America FUJITSU MEDIA DEVICES OF AMERICA, INC. 1731 Technology Drive,Suite 800, San Jose, CA 95110 U.S.A. Tel: (1)-408-437-8900 Fax: (1)-408-437-0700 http://www.fujitsumedia.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/ All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU MEDIA DEVICES is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that Fujitsu will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F0104 FUJITSU LIMITED Printed in Japan