L25 Incremental Optical Encoder Mechanical Specifications Shaft Diameter: 1/4" nominal Flat On Shaft: 0.80 long x 0.03 deep Shaft Loading: up to 5 lbs. axial and 8 lbs. radial Shaft Runout: .0005 T.I.R. maximum Starting Torque at 25C: 0.07 in-oz typical, 0.12 in-oz maximum without sealed bearings; 0.50 in-oz typical, 1.0 in-oz maximum with sealed bearings Bearings: Class ABEC 5 Shaft material: 416 stainless steel Bearing Housing: Die cast aluminum with iridite finish Cover: Drawn aluminum, 0.060" wall, protective finish standard. Die cast aluminum with protective finish for EM, SM, ECS and SCS terminations Bearing Life: 1 X 109 revs (6,700 hrs at 2500 RPM) Maximum RPM: 10,000 Moment of Inertia: 4.1 x 10-4 oz-in-sec2 Weight: 13 oz. typical Electrical Specifications Incorporating the same high quality optics and electronics as the H25, Code: Incremental Cycles Per Shaft Turn: 1 to 28,800 Voltage/Output: (see note 5) 15V/V: Line Driver, 5-15 VDC in, Vout = Vin 28V/V: Line Driver, 5-28 VDC in, Vout = Vin 28V/5V: Line Driver, 5-28 VDC in, Vout = 5 VDC 28V/OC: Open collector, 5-28 VDC in, OCout Current Requirements: TTL: 175 mA maximum 125 mA typical Output Format: 2 channels in quadrature = 27 electrical typical. Optional index is typically gated 1/2 cycle wide (see figure 1) Protection Level: Reverse, overvoltage and output short circuit (4469, 7272 only) Frequency Response: 100 kHz (see note 7), up to 800 KHz with interpolation option Output Terminations: (see table 1) the L25 also offers low starting torque. Other features include ABEC Environmental Specifications The L25 is a lighter duty version of BEI's H25 optical encoder. Enclosure Rating: NEMA 2 (IP43) Temperature: Operating, 0 to 70 C; extended temperature testing available (see note 8); storage; -25 to 90 C Shock: 50 g's for 11 msec duration Vibration: 5 to 2000 Hz @ 20 G's Humidity: 98% RH without condensation 5 bearings, EMI shielding, a 1/4" diameter stainless steel shaft and a drawn aluminum cover. Typical applications include use with light machine tools, test and laboratory instrumentation, the biomedical industry and flow metering. NOTES & TABLES: All notes and tables referred to in the text can be found on the back of this page. Model L25 Ordering Options for assistance call 800-350-2727 Use this diagram, working from left to right to construct your model number (Example: L25G-F3-SB-2000-ABZC-28V/V-SC18). L25 G TYPE: L = Heavy Duty 25 = 2.500" Dia. Optional Face Mounts F1, F2, F3, or F4 Blank = None Cycles Per Turn: (Enter Cycles) See table 2 HOUSING CONFIG. LETTER: SHAFT Seal Configuration: G=2.62 Dia. Servo Mount See dimensions SB = Seal Integral with Bearing Blank = Shielded Bearing Complements C = Complementary Outputs Blank = None See note 4 No. of Channels: Output Termination Location: E = End S = Side Voltage/output: 15V/V = 5-15 Vin/out 28V/V A = Single Channel = 5-28Vin/out AB = Dual Quad. Ch. 28V/5 = 5-28Vin/5Vout ABZ = Dual with Index AZ = Single with Index 28V/OC = 5-28Vin/OCout See note 3 See note 5 Output Termination: SPECIal features: S= Special features specified M16 = on purchase order MS3102R16S-1P (consult factory) D15 = DA15P See table 6 C = Pigtail Cable CS = Cable with Seal Cable length specified in inches (i.e. C18 = Pigtail 18" long) See table 1 & note 9 Tel: 805-968-0782 /800-350-2727 | Fax: 805-968-3154 / 800-960-2726 7230 Hollister Ave., Goleta, CA 93117-2807 | www.beisensors.com Specification No. 02004-001 Rev.08-11 These commodities, technology or software if exported from the United States must be in accordance with the Bureau of Industry, and Security, Export Administration regulations. Diversion contrary to U.S law is prohibited. EC = 2.06 0.22 .125 .125 0.88 0.03 0.22 .125 L25 Incremental Optical Encoder 2.500 O 2.498 Dimensions O 2.625 0.22 L25G - M16 or M18 2.500 O 2.498 SIDE SIDE CABLE (SC) (SC) 18"CABLE PIGTAIL 18"LEADS PIGTAIL LEADS STANDARD STANDARD (22AWG) (22AWG) SC = 1.60 = 1.60 ECSC = 2.06 EC = 2.06 .125 .125 END CABLE CABLE (EC) (EC) OPTIONAL 0.22 OPTIONAL .125 .125 2.500 2.500 O 2.498 O 2.498 2.06 O 2.625 O 2.625 O 0.2497 0.2497 F1 O 0.2495 0.2495 Optional Face Mounts SM SM ONNECTOR CONNECTOR POSITION POSITION 0.20 2.50 2.50 30 30 (SM16) 1.30 (SM16) 65 (SM18) 1.65 (SM18) 1PDA15P S-1P OR NECTOR 1POR 18-1P OR CTOR EM EM CONNECTOR CONNECTOR POSITION POSITION 45 2.06 DA15P DA15P CONNECTOR CONNECTOR F1 10-32 UNF-2B 0.188 Min. Deep 3 places equally spaced on a O 1.875. bolt circle. 45 2.500 O 2.498 3 places equally spaced equally spaced on 3a places O 1.875. bolt circle. a O 1.875. bolt circle. 1.30on(SM16) 1.65 (SM18) 45 Figure 1 O 0.2497 0.2495 on a O 2.00 bolt circle. (0.900 square, Ref.) 2.06 2.06 30 F2 4-40 UNC-2B 0.250 Min. Deep 4 places equally spaced on a O 1.272 bolt circle. (0.900 square, Ref.) F3 F3 4-40 UNC-2B 4-40Min. UNC-2B 0.250 Deep 0.250 equally Min. Deep 4 places spaced 4 spaced on a places O 2.00equally bolt circle. on a OF4 2.00 bolt circle. F3 4-40 UNC-2B 0.250 Min. Deep 4 places equally spaced3030 on a O 2.00 bolt circle. 30 Table Output Terminations Table1-Incremental 1: Incremental Output Terminations 6-32 UNC-2B 0.250 Min. Deep 3 places equally spaced on a O 2.00 bolt circle. F4 F4 6-32 UNC-2B 6-32Min. UNC-2B 0.250 Deep 0.250 equally Min. Deep 3 places spaced spaced on 3a places O 2.00equally bolt circle. on a O 2.00 bolt circle. F4encoder The stylewill willdetermine determine pinouts. For example, an encoder F2 The connector connector style For example, an with with ABC F3 pinouts. UNC-2B 4-40 4-40 UNC-2B ABCUNC-2B channels an M18 connector usesthe thetable table to the right. channels and and an M18 connector uses the6-32 right. 0.250 Min. Deep 1 CYCLE 90 Deg. M18 CONNECTOR PIN CHANNEL A A B B C Z D +V E -- F 0V G CG H A I B J Z M12 CONNECTOR PIN CHANNEL A A B B C Z D +V E -- F 0V G CG H A J B K Z Table 2-Disc 2: Disc Resolutions for Incremental Encoder Models H25, H38, H40, L L25 25, E25 Table Resolutions for Incremental Encoder Model (R) 1, 2, 3, 5, 6, highlighted 7, 8, 10, 13, 25, 26, 30, 32, Model 33, 34,H25 36,EXPRESS 37, 40,ENCODERS 45, 48, 50, 51,ship 56*, 60,to64, 66,days. 72, 75, Resolutions with 16, 20, are24, available as standard that in one three 80,1,86, 88, 90, 100, 102, 120, 122,125, 127, 128, 132, 144, 148, 150, 158, 160, 175, 176, 180, 187, 192, 2, 3, 5, 6, 7, 8, 10, 13, 16, 20, 24, 25, 26, 30, 32, 33, 34, 36, 37, 40, 45, 48, 50, 51, 56*, 60, 64, 66, 72, 75, 80, 86, 88, 90, 100, 102, 120, 122,200, 202,125,204*, 217, 220, 240, 250, 254, 255, 256, 264*, 274, 280, 283, 288, 292, 300, 312, 320, 321, 325, 360, 127, 128, 132, 144, 148, 150, 158, 160, 175, 176, 180, 187, 192, 200, 202, 204*, 217, 220, 240, 250, 254, 255, 256, 264*, 274, 280, 283, 366,288,372, 375, 377, 380, 381, 384, 385, 393, 400, 430, 432, 450, 462, 480, 490, 500, 502, 508, 512, 522, 292, 300, 312, 320, 321, 325, 360, 366, 372, 375, 377, 380, 381, 384, 385, 393, 400, 430, 432, 450, 462, 480, 490, 500 502, 508, 512, 522, 530, 550, 560*, 576, 598, 600, 604, 625, 628, 635, 638, 640, 660, 672, 676, 680, 687, 690, 700, 720, 725, 530, 550, 560*, 576, 598, 600, 604, 625, 628, 635, 638, 640, 660, 672, 676, 680, 687, 690, 700, 720, 725, 735, 740, 744, 748,750, 762, 768, 780, 785, 735, 740, 744, 748, 750, 762, 768, 780, 785, 800, 812, 825, 850, 864, 878, 888, 900, 912, 914, 938, 942, 800, 812, 825, 850, 864, 878, 888, 900, 912, 914, 938, 942, 955, 960, 1000, 1016, 1024, 1030, 1035, 1036, 1040, 1054, 1056, 1074, 1076, 1080, 955, 960, 1000, 1016, 1024, 1030, 1035, 1036, 1040, 1054, 1056, 1074, 1076, 1080,1088, 1100, 1101, 1125, 1088, 1100, 1101, 1125, 1136, 1200, 1237, 1250, 1257, 1270, 1280, 1300 1314, 1332, 1333, 1390, 1400, 1414, 1427, 1440, 1484, 1500, 1562, 1136, 1200, 1237, 1250, 1257, 1270, 1280, 1300, 1314, 1332, 1333, 1390, 1400, 1414, 1427, 1440, 1484, 1570, 1596, 1600, 1650, 1666, 1718, 1745, 1774, 1800, 1840*, 1850, 1855, 1875, 1894, 1920, 1952, 1968, 1979,1995, 2000, 2048, 2080, 1500, 1562, 1570, 1596, 1600, 1650, 1666, 1718, 1745, 1774, 1800, 1840*, 1850, 1855, 1875, 1894, 1920, 2094, 2100, 2160, 2164, 2199, 2200, 2250, 2356, 2400, 2485, 2500, 2514, 2519, 2540, 3000, 3125, 3600, 4000, 4096, 5000 1952, 1968, 1979, 1995, 2000, 2048, 2080, 2094, 2100, 2160, 2164, 2199, 2200, 2250, 2356, 2400, 2485, *AB or ABC output only. NOTE: Resolutions up to 72,000 are available. 2500, 2514, 2519, 2540, 3000, 3125, 3600, 4000, 4096, 5000 * AB or ABC output only. Note: Resolutions up to 72,000 are available. Tel: 805-968-0782 /800-350-2727 | Fax: 805-968-3154 / 800-960-2726 7230 Hollister Ave., Goleta, CA 93117-2807 | www.beisensors.com F2 4-40 UNC-2B 0.250 Min. Deep 4 places equally spaced on a O 1.272 bolt circle. (0.900 square, Ref.) HI 0.20 LO A 2.06 B DA15P CONNECTOR Notes F3 4-40 UNC-2B 0.250 Min. Deep 4 places equally spaced on a O 2.00 bolt circle. Z B 30 Z F4 6-32 UNC-2B 0.250 Min. Deep 3 places equally spaced on a O 2.00 bolt circle. CCW Rotation Viewing Face 1. Mounting is usually done either using the D-style square flange mount, E- or G-style servo mounts, or one of the standard face mounts, F1 for example. Consult factory for additional face mount options. 2.The shaft seal is recommended in virtually all installations. The most common exceptions are applications requiring a very low starting torque or those requiring operation at both high temperature and high speed. 3. Non-standard index widths and multiple indices are available by special order. Consult factory. 4. Complementary outputs are recommended for use with line driver type (source/ sink) outputs. When used with differential receivers, this combination provides a high degree of noise immunity. 5. Output IC's: Output IC's are available as either Line Driver (LD) or NPN Open Collector (OC) types. Open Collectors require pull-up resistors, resulting in higher output source impedance (sink impedance is similar to that of line drivers). In general, use of a Line Driver style output is recommended. Line Drivers source or sink current and their lower impedance mean better noise immunity and faster switching times. Warning: Do not connect any line driver outputs directly to circuit common/OV, which may damage the driver. Unused outputs should be isolated and left floating. Our applications specialists would be pleased to discuss your system requirements and the compatibility of your receiving electronics with Line Driver type outputs. 28V/V: Multi-voltage Line Driver (7272*): 100 mA source/sink. Input voltage 5 to 28 VDC +/- 5% standard (Note: Vout = Vin). This driver is TTL compatible when used with 5 volt supply. Supply lines are protected against overvoltage to 60 volts and reverse voltage. Outputs are short circuit protected for one minute. Supply current is 120 mA typical (plus load current). This is the recommended replacement for 3904R and 7406R open collector outputs with internal pullup resistors. It is also a direct replacement for any 4469, 88C30, 8830 or 26LS31 line driver 28V/5: Multi-voltage Line Driver (7272*): 100 mA source/sink. Input voltage 5 to 28 VDC +/- 5% standard, internally regulated with 5V (TTL compatible) logic out. Supply lines are protected against overvoltage to 60 volts and reverse voltage. Outputs are short circuit protected for one minute. Supply current is 90 mA typical (plus load current). Note: Limit encoder load to 2.5W max at ambient. Example at 12 VDC: 2.5W/(+12VDC minus +5VDC) = 357 mA total allowed current. Consult factory for your specific requirements. 15V/V: Multi-voltage Line Driver (4469*): 100 mA source/sink. Input voltage 5 to 15 VDC +/- 5% standard (Note: Vout = Vin). TTL compatible when used with 5 volt supply. Supply lines are protected against overvoltage to 60 volts and reverse voltage. Outputs are short circuit protected for one minute. Supply current is 90 mA typical (plus load current). This is a direct replacement for the 4469 Line Driver. 28V/OC: NPN Open Collector (3904*, 7273*). Current sink of 80 mA max. Current sourced by external pull- up resistor. Output can be pulled up to voltage other than supply voltage (30 V max). Input voltage 5 to 28 VDC + /- 5% standard. Supply current is 120 mA typical. This replaces prior IC's with designations of 3904, 7406, 3302, 681 and 689. 5V/OCR, 15V/OCR, 24V/ OCR: Open Collector (3904R*, 7406R*, 7273R*): Current sink of 70 mA max. Includes internal pull-ups sized at approximately 100 ohms/volt. Max current source is 10 mA. Supply current is 100 mA typical, 120 mA with internal pullups. The 5V/OCR, 15V/OCR and 24V/OCR are often replaced by the 28V/V in system upgrades. 3904, 3904R, 4469, 5V/V, 5V/OC, 5V/OCR, 9V/OC: Intrinsically safe line driver and open collector outputs. These drivers are specific to intrinsically safe encoders, and are installed per the appropriate control drawings listed in Table 2.on this page. 6. Special -S at the end of the model number is used to define a variety of non-standard features such as special shaft lengths, voltage options, or special testing. Please consult the factory to discuss your special requirements. 7. Higher frequency response may be available. Please consult with the factory. 8. Extended temperature ratings are available in the following ranges: -40 to 70C, -40 to 85C, -20 to 105C and -40 to 105C depending on the particular model. Some models can operate down to -55C. Extended temperature ranges can affect other performance factors. Consult with factory for more specific information. 9. Mating straight plug receptacles may be ordered from the factory: For M12 use MS3116F12-10S, For M14 use MS3106F14S-6S For M14/19 use MS3116J14-19S, For M16 use MS3106F16S-1S For M18 use MS3106F18-1S, For M20 use MS3106F20-29S Notes and Tables 0.250 Min. Deep 0.250 Min. Deep 3 places equally spaced 4 places equally spacedM16 CONNECTOR 4 places equally spaced M14 CONNECTOR CHANNELS DESIGNATED IN MODEL NO. circle. on a O 1.272 bolt circle. on a O 2.00 bolt circle. ABZ on a O 2.00 bolt PIN PIN ABC (0.900 square, Ref.) E A A A D B B B C C Z A 30 B D +V (SUPPLY VOLTAGE) F E -- B A F 0 V (CIRCUIT COMMON) F4 G CASE GROUND (CG) (except H20) F3 6-32 UNC-2B 4-40 UNC-2B 0.250 Min. Deep 0.250WIRE Min. COLOR Deep DA 15P 3 places equallyCHANNELS spaced DESIGNATED IN MODEL NO. 4 places(22AWG) equally spacedCONNECTOR ABC ABZC on a O 2.00 ABZ bolt circle. on a O 2.00 bolt circle. YEL 13 A A A BLUE 14 B B B ORN 15 Z -- Z 30 W-Yel 10 -- A A W-Blu 11 -- B B W-Orn 12 -- -- Z RED 6 +V (SUPPLY VOLTAGE) F4 6-32 UNC-2B BLK 1 0 V (CIRCUIT COMMON) 0.250 Min.GRN Deep 9 CASE GROUND (CG) (except H20) 3 places equally spaced WHITE SHIELD DRAIN (Shielded Cable Only) on a O 2.00 bolt circle. Output Waveform A MS3102R16S-1P OR MS3102R18-1P F2 F2 CONNECTOR F3 F2 4-40 UNC-2B 4-40 UNC-2B EM 4-40Min. UNC-2B 4-40 0.250 Deep UNC-2B CONNECTOR 0.250 Min. Deep 0.250 Min. Deep 4 places equally spaced POSITION 0.250 Min. 4 places equally spacedDeep 4 places equally spacedon on a O 1.272 bolt circle. O4 1.272 bolt circle. places equally spaced (0.900asquare, Ref.) on a O 1.272 bolt circle. (0.900 square, Ref.) F1 10-32 UNF-2B 0.188 Min. Deep 3 places equally spaced on a O 1.875. bolt circle. O 2.625 45 45 10-32 UNF-2B 0.188 Min. Deep 3 places equally spaced on a O 1.875. bolt circle. 0.20 0.20 Tables 45 30 DA15P CONNECTOR END CABLE (EC) OPTIONAL F1 F2 30 10-32 UNF-2B 30 4-40 UNC-2B 0.188 Min. Deep 0.250 Min. Deep 2.50 3 places equally spaced 4SMplaces equally spaced on a0.22 O0.22 1.875. bolt circle. F1 CONNECTOR F1 on a O 1.272 bolt circle. 10-32 UNF-2B POSITION 10-32 UNF-2B (0.900 0.188 Min. Deep square, Ref.) 0.188 Min. Deep 0.88 0.88 0.03 0.03 0.20 O 2.625 END 45 30 O 0.2497 0.2495 O 0.2497 0.2495 06 SC = 1.60 F1 EC = 2.06 SIDE 10-32 UNF-2B .125 CABLE (SC) 0.188 Min. Deep 18" PIGTAIL 3 places equally LEADSspaced on a OSTANDARD 1.875. bolt circle. (22AWG) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: BEI Sensors: L25G-F3-SB-1000-ABZ-28V/V-EM16 L25G-F2-1000-ABZ-28V/V-SC5-S