MMBD1201 / 1203 / 1204 / 1205
MMBD1200 series, Rev. A1
MMBD1201 / 1203 / 1204 / 1205
High Conductance Ultra Fast Diode
Sourced from Process 1P.
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
Symbol
Parameter
Value
Units
WIV Working Inverse Voltage 50 V
IF(AV) Average Rectified Current 200 mA
IFM DC Forward Current 600 mA
IFRM Recurrent Peak Forward Current 700 mA
IFSM Non-repetitive Peak Forward Surge Current
Pulse width = 1.0 second
Pulse width = 1.0 microsecond
1.0
2.0
A
A
Tstg Storage Temperature Range -55 to +150 °C
TJ Operating Junction Temperature 150 °C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Thermal Characteristics TA = 25°C unless otherwise noted
*Device mounted on glass epoxy PCB 1.6" X 1.6" X 0.06"; mounting pad for the collector lead min. 0.93 in2
Symbol
Parameter
Max
Units
MMBD1201/1203/1204/1205*
PD Total Device Dissipation
Derate above 25°C
350
2.8
mW
mW/°C
RθJA Thermal Resistance, Junction to Ambient 357 °C/W
CONNECTION DIAGRAMS
3
21
3
21
3
21
3
12 NC
1201
1204 1205
1203
24
3
12
MARKING
MMBD1201 24 MMBD1204A 27
MMBD1203 26 MMBD1205A 28
SOT-23
3
1
2
2001 Fairchild Semiconductor Corporation
MMBD1201 / 1203 / 1204 / 1205
MMBD1200 series, Rev. A1
Electrical Characteristics TA = 25°C unless otherwise noted
Typical Characteristics
REVERSE VOLTAGE vs REVERSE CURRENT
BV - 1.0 to 100 uA
1 2 3 5 10 20 30 50 100
110
120
130
140
150
I - REVERSE CURRENT (uA)
V - REVERSE VOLTAGE (V)
R
R
Ta= 25°C
R
R
Ta= 25°C
REVERSE CURRENT vs REVERSE VOLTAGE
IR - 10 to 100 V
GENERAL RULE: The Reverse Current of a diode will approximately
double for every ten (10) Degree C increase in Temperature
10 20 30 50 70 100
0
50
100
150
200
250
300
V - REVERSE VOLTAGE (V)
I - REVERSE CURRENT (nA)
225
FORWARD VOLTAGE vs FORWARD CURRENT
VF - 1.0 to 100 uA
1 2 3 5 10 20 30 50 100
250
300
350
400
450
I - FORWARD CURRENT (uA)
V - FORWARD VOLTAGE (mV)
F
F
485 Ta= 25°C
FORWARD VOLTAGE vs FORWARD CURRENT
VF - 0.1 to 10 mA
0.1 0.2 0.3 0.5 1 2 3 5 10
450
500
550
600
650
700
I - FORWARD CURRENT (mA)
V - FORWARD VOLTAGE (mV)
F
F
725 Ta= 25°C
Symbol
Parameter
Test Conditions
Min
Max
Units
VR Breakdown Voltage IR = 100 µA 100 V
IRM Maximum Instantaneous Reverse
Current
VR = 20 V
VR = 50 V
VR = 50 V, TA = 150°C
25
50
5.0
nA
nA
µA
VFM Maximum Instantaneous Forward
Voltage
IF = 1.0 mA
IF = 10 mA
IF = 100 mA
IF = 200 mA
IF = 300 mA
550
660
820
0.87
600
740
920
1.0
1.1
mV
mV
mV
V
V
CT Diode Capacitance VR = 0, f = 1.0 MHz 2.0 pF
trr Reverse Recovery Time IRR = 1.0 mA, IF = IR = 10 mA,
RL = 100Ω
4.0 ns
VR
VF
VF
High Conductance Ultra Fast Diode
(continued)
MMBD1201 / 1203 / 1204 / 1205
MMBD1200 series, Rev. A1
Typical Characteristics (continued)
Average Rectified Current (Io) &
Forward Current (I ) versus
Ambient Temperature (T )
0 50 100 150
0
100
200
300
400
500
T - AMBIENT TEMPERATURE ( C)
P - POWER DISSIPATION (mW)
I - FORWARD CURRENT STEADY STATE - mA
o
D
R
A
F
Io - AVERAGE RECTIFIED CURRENT - mA
A
FORWARD VOLTAGE vs FORWARD CURRENT
VF - 10 - 800 mA
10 20 30 50 100 200 300 500
0.6
0.8
1
1.2
1.4
I - FORWARD CURRENT (mA)
V - FORWARD VOLTAGE (V)
F
F
1.5
Ta= 25°C
CAPACITANCE vs REVERSE VOLTAGE
VR - 0.0 to 15 V
02468101214
1
1.1
1.2
1.3
REVERSE VOLTAGE (V)
CAPACITANCE (pF)
Ta= 25°C
15
REVERSE RECOVERY TIME vs REVERSE CURRENT
TRR - IR 10 mA vs 60 mA
IRR (Reverse Recovery Current) = 1.0 mA - Rloop = 100 Ohms
10 20 30 40 50 60
1
1.5
2
2.5
3
3.5
4
REVERSE CURRENT (mA)
REVERSE RECOVERY (nS)
Ta= 25°C
POWER DERATING CURVE
0 50 100 150 200
0
100
200
300
400
500
I - AVERAGE TEMPERATURE ( C)
P - POWER DISSIPATION (mW)
O
D
o
DO-35 Pkg
SOT-23 Pkg
VF
PD
High Conductance Ultra Fast Diode
(continued)
SOT-23 Packagin g
Confi gurat ion: Figure 1.0
Components Leader Tape
500mm minimum or
125 emp ty pockets
Tr ailer Tape
300mm minimum or
75 empty pocket s
SOT-23 Tape Leader and Trailer
Configuration: Figure 2.0
Cover Tape
Car rier Tape
Note/Comments
Packaging Option
SOT-23 Packaging Information
Standard
(no flow code) D87Z
Packaging type
Reel Si ze
TNR
7" Dia
TNR
13"
Qty per Reel/Tube/Ba g 3,000 10,000
Bo x Dimen si on (mm ) 187x107x183 343x343x64
Max qt y per B o x 24,000 30,000
Weight per unit (gm) 0.0082 0.0082
Weight per Reel (kg) 0.1175 0.4006
Human readable
Label
Human Readable Label
Human Readable Label sample
343mm x 342mm x 64mm
Intermediate box for L87Z Opti on
187mm x 107mm x 183mm
Intermediate Box for Standard Option
SOT-23 Unit Orientation
3P 3P 3P 3P
Human Readable
Label
Customized Label
Embossed
Carr ier Tape
Antistatic Co ver Tape
Packaging Description:
SOT-23
made from a dissipative (carbon filled) polycarbonate
resin. The cov er tape is a multilayer film (Heat A cti vated
Adhesive in nature) primaril y composed of polyester film ,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
3,000 uni ts per 7" or 177cm di ameter reel. The reels are
dark blue in color and is made of polystyrene plastic (anti-
static coated). Other option comes in 10,000 units per 13"
or 330cm diameter r eel. This and some other opt i ons are
described in the Packaging Information table.
These full reel s are individually labeled and pl aced inside
a standard intermediate made of recyclable corrugated
brown paper w i th a Fai r child l ogo printi ng. One pizza box
contains eight reels maximum. And these intermediate
boxes are placed inside a labeled shipping box which
comes in dif f erent si zes depending on the number of part s
shipped.
parts are shipped in tape. The carrier tape is
SOT-23 Tape and Reel Data
September 1999, Rev . C
©2000 Fairchild Semiconductor International
Dimensions are in millimeter
Pkg type
A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc
SOT-23
(8mm)
3.15
+/-0.10 2.77
+/-0.10 8.0
+/-0.3 1.55
+/-0.05 1.125
+/-0.125 1.75
+/-0.10 6.25
min 3.50
+/-0.05 4.0
+/-0.1 4.0
+/-0.1 1.30
+/-0.10 0.228
+/-0.013 5.2
+/-0.3 0.06
+/-0.02
Dimensions are in inches and millimeters
Tape Size Reel
Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
8mm 7" Dia 7.00
177.8 0.059
1.5 512 +0.020 /-0.008
13 +0.5/-0.2 0.795
20.2 2.165
55 0.331 +0.059/-0.000
8.4 +1.5/0 0.567
14.4 0.311 – 0.429
7.9 – 1 0.9
8m m 13" D ia 13.00
330 0.059
1.5 512 +0.020 /-0.008
13 +0.5/-0.2 0.795
20.2 4.00
100 0.331 +0.059/-0.000
8.4 +1.5/0 0.567
14.4 0.311 – 0.429
7.9 – 1 0.9
See detail AA
Dim A
max
13" Diameter Option
7" Diameter Option
Dim A
Max
See detail AA
W3
W2 max Measured at Hub
W1 Measured at Hub
Dim N
Dim D
min
Dim C
B Min
DETAIL AA
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum component rotation
0.5mm
maximum
0.5mm
maximum
Sketch C (Top View)
Component lateral movement
Typical
component
cavity
center line
20 deg maximum
Typical
component
center line
B0
A0
Sketch B (Top View)
Component Rotation
Sketch A (Side or Front Sectional View)
Component Rotation
User Direction of Feed
SOT-23 Embossed Carrier Tape
Configuration: Figure 3.0
SOT-23 Reel Configuration: Figure 4.0
P1 A0
D1
FW
E1
E2
Tc
Wc
K0
T
B0
D0P0 P2
SOT-23 Tape and Reel Data, continued
September 1999, Rev . C
SOT-23 (FS PKG Code 49)
SOT-23 Package Dimensions
September 1998, Rev . A1
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Par t Weight per unit (gram): 0.0082
©2000 Fairchild Semiconductor International
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT ST A TUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PA TENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
PowerTrench
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER
SMART START™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
Rev . G
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
F ACT Quiet Series™
FAST
SyncFET™
TinyLogic™
UHC™
VCX™
