Product Specification
( ) Preliminary Specifications
( V) Final Specifications
Module
Model Name
Customer Date
Checked &
Approved by
Approved by Date
Prepared by
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
G101EVN01.0 rev.3.0
1/24
10.1 Inch Color TFT-LCD
G101EVN01.0
Note: This Specification is subject to change
without notice.
Debbie Chiu 2014/02/10
ShengHsun Lin 2014/02/10
General Display Business Division /
AU Optronics corporation
Product Specification
Contents
1. Operating Precautions.....................................................................................4
2. General Description ......................................................................................... 5
3. Functional Block Diagram ...............................................................................9
4. Absolute Maximum Ratings........................................................................... 10
5. Electrical Characteristics............................................................................... 11
6. Signal Characteristic...................................................................................... 14
7. Reliability Test Criteria...................................................................................20
8. Mechanical Characteristics ........................................................................... 21
9. Label and Packaging...................................................................................... 23
10 Safety..............................................................................................................24
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
2.2 Optical Characteristics.......... ........... ............ ........... ............ ........... ............ ........... .....6
4.1 Absolute Ratings of TFT LCD Module............ ........... ............ ........... ............ ........... ... 10
4.2 Absolute Ratings of Environment...... ............ ........... ............ ........... ............ ........... ... 10
5.1 TFT LCD Module ............ ........... ............ ........... ............ ........... ............ ........... .........11
5.2 Backlight Unit........... ............ ........... ............ ........... ............ ........... ............ ........... ... 13
6.1 Pixel Format Image....................... ............ ........... ............ ........... ............ ........... ......14
6.3 Signal Description...................... ............ ........... ............ ........... ............ ........... .........15
6.4 The Input Data Format.......... ........... ............ ........... ............ ........... ............ ........... ... 17
6.5 Interface Timing ........... ........... ............ ........... ............ ........... ........... ............ ............18
6.6 Power ON/OFF Sequence.......... ............ ........... ............ ........... ............ ........... .........19
8.1 LCM Outline Dimension (Front View).......... ........... ............ ........... ............ ........... ......21
8.2 LCM Outline Dimension (Rear View) .......... ........... ............ ........... ............ ........... ......22
9.1 Shipping Label (on the rear side of TFT-LCD display)....................... ............ ........... ... 23
9.2 Carton Package ........... ........... ............ ........... ............ ........... ........... ............ ............23
10.1 Sharp Edge Requirements........... ............ ........... ............ ........... ............ ........... ......24
10.2 Materials .......... ............ ........... ............ ........... ............ ........... ............ ........... .........24
10.3 Capacitors........... ............ ........... ............ ........... ............ ........... ............ ........... ......24
10.4 National Test Lab Requirement...................... ............ ........... ............ ........... ............24
G101EVN01.0 rev.3.0
2/24
Product Specification
Record of Revision
Version and Date Page Old description New Description
Old Absolute Ratings of Environment Update the range of Absolute Ratings of
Environment
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
G101EVN01.0 rev.3.0
3/24
0.0 Mar, 07, 2013
All
First draft specification
-
1.0 May, 14, 2013
--
Final Specification
5
Typical Power Consumption
Correct the writing mistake.
13
Add LED Life time 25K (typical)
5
22
23
Add air tape thickness in module 5.54mm (max.)
and update in 2D drawing
11
Update Power Specifiation table
13
Note 2: VCC, IVCC, PVCC are defined for LED
backlight.
Note 2: VLED, IVLED, PVLED are defined for LED
backlight.
Add IVLED, PVLED range is under VLED =12V
condition.
15
Correct the name of VDD.
24
Outside dimension of carton: 374mm(L)*
320mm(W)*241mm(H)
Pallet size：1140 mm * 980 mm * 135mm
Update Packing Cartion Condition
Outside dimension of carton:
484(L)*328(W)*257(H)mm
Pallet size：1450mm*980mm*138mm
2.0 July, 10, 2013
13
Old Vled Electrical Charateristics Table
Update Vled Electrical Charateristics Table
15
Old Pin Assignment.
Update Pin Assignment.
3.0 Feb, 10, 2014
10
Product Specification
1. Operating Precautions
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
1)
Since front polarizer is easily damaged, please be cautious and not to scratch it.
2)
Be sure to turn off power supply when inserting or disconnecting from input connector.
3)
Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4)
When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5)
Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface.
6)
To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module.
7)
Do not open nor modify the module assembly.
8)
Do not press the reflector sheet at the back of the module to any direction.
9)
In case if a module has to be put back into the packing container slot after it was taken out from the
container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light
bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time.
Please design your display product well to avoid external force applying to module by end-user directly.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be
supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied
exemption.
13) Severe temperature condition may result in different luminance, response time and lamp ignition voltage.
14) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion and
reduce luminance dramatically.
15) The data on this specification sheet is applicable when LCD module is placed in landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen saver or shuffle
content periodically if fixed pattern is displayed on the screen.
G101EVN01.0 rev.3.0
4/24
Product Specification
2. General Description
.
2.1 Display Characteristics
Items Unit Specifications
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
G101EVN01.0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a
driver circuit, and LED backlight system. The screen format is intended to support the 16:10
WXGA, 1280(H) x800(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight
driving circuit All input signals are LVDS interface compatible.
G101EVN01.0 is designed for a display unit of notebook style personal computer and industrial
machine.
The following items are characteristics summary on the table under 25 oC condition:
G101EVN01.0 rev.3.0
5/24
Screen Diagonal
[inch]
10.1”
Active Area
[mm]
216.96(H) x 135.6(V)
Pixels H x V
1280 x 3(RGB) x 800
Pixel Pitch
[mm]
0.1695 X 0.1695
Pixel Arrangement
R.G.B. Vertical Stripe
Display Mode
MVA, Normally Black
Nominal Input Voltage VDD
[Volt]
3.3 (Typical)
Power Consumption
[Watt]
3.4 max. (Include Logic and Blu power)
Weight
[Grams]
187g max.
Physical Size
[mm]
229.46±0.5(H) x 149.2±0.5(V) x 4.96(max.)(T)
(without air tape) /5.54(max.)(T) (with air tape)
Electrical Interface
LVDS
Surface Treatment
Anti-Reflection≦1.5%, Hardness 3H
Anti- Static
Support Color
262K colors ( RGB 6-bit )
Temperature Range
Operating
Storage (Non-Operating)
[oC]
[oC]
-20 to +60
-30 to +70
RoHS Compliance
RoHS Compliance
Product Specification
2.2 Optical Characteristics
Item Unit Conditions Min. Typ. Max. Note
< 1 lux
D Module
Field angle
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
The optical characteristics are measured under stable conditions at 25 oC (Room Temperature):
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
Field angle 2∘with 50cm measuring distance
Test Point Follow Note 2 position
Environment
LC
SR_3 or
equivalent
Measuring distance
Module Driving Equipment
G101EVN01.0 rev.3.0
6/24
White Luminance
[cd/m2]
ILED= 25mA
(5p average)
255
300
Uniformity
%
5 points
80%
Contrast Ratio
1000
1300
-
Response Time
[msec]
[msec]
Rising
Falling
[msec]
Rising + Falling
---
25
35
Viewing Angle
[degree]
[degree]
[degree]
[degree]
Horizontal (Right)
CR = 10 (Left)
80
80
85
85
---
---
Vertical (Upper)
CR = 10 (Lower)
80
80
85
85
---
---
Color / Chromaticity
Coordinates
(CIE 1931)
Red x
0.549
0.579
0.609
Red y
0.308
0.338
0.368
Green x
0.295
0.325
0.355
Green y
0.53
0.56
0.59
Blue x
0.122
0.152
0.182
Blue y
0.095
0.125
0.155
White x
0.283
0.313
0.343
White y
0.299
0.329
0.359
Color Gamut
%
-
45
-
Product Specification
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
Note 2: Definition of 5 points position (Display active area: 216.96(H) x 135.6(V))
W
W /4
W /4
W /4
W /4
H /4
1
2
H /4
3
H
H /4
4
5
H /4
Note 3: The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum
test point luminance
Minimum Brightness of five points
δW9 =
Maximum Brightness of five points
Note 4: Definition of contrast ratio (CR):
Contrast ratio (CR)= Brightness on the “White” state
Brightness on the “Black” state
Note 5: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black”
(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and
90% of amplitudes. Please refer to the figure as below.
%
Tf
Tr
100
90
Optical
White
Black
White
response
10
0
G101EVN01.0 rev.3.0
7/24
Product Specification
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
Note 6: Definition of viewing angle
Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180° horizontal and 180°
vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ)
horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically
perpendicular to the display surface with the screen rotated to its center to develop the desired measurement
viewing angle.
G101EVN01.0 rev.3.0
8/24
Product Specification
3. Functional Block Diagram
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
The following diagram shows the functional block of the 10.1 inch color TFT/LCD module:
G101EVN01.0 rev.3.0
9/24
Product Specification
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Item Symbol Min Max Unit
4.2 Absolute Ratings of Environment
Item Symbol Min Max Unit
T=70 , H=30%
T=60 , H=50%
T=40 , H=90%
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
Note 1: At Ta (25℃ )
Note 2: Permanent damage to the device may occur if exceed maximum values
℃
℃
℃
Operating Range
Storage Range
G101EVN01.0 rev.3.0
10/24
Logic/LCD drive Voltage
Vin
-0.3
+4.0
[Volt]
Operating Temperature
TOP
-20
+60
[oC]
Operation Humidity
HOP
5
90
[%RH]
Storage Temperature
TST
-30
+70
[oC]
Storage Humidity
HST
5
90
[%RH]
Product Specification
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Symbol Parameter Min Typ Max Units Remark
-
-
90%
VDD rising time
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
The power specification are measured under 25℃ and frame frenquency under 60Hz
Note 1 : Maximum Measurement Condition：White Pattern at 3.3V driving voltage. (Pmax=V3.3 x Iwhite)
Note 2：Measure Condition
3.3V
10%
0V
0.5ms
G101EVN01.0 rev.3.0
11/24
VDD
Logic/LCD Drive
Voltage
3.0
3.3
3.6
[Volt]
IDD
VDD Current
-
170
245
[mA]
All Black Pattern
(VDD=3.3V, at 60Hz)
Irush
LCD Inrush Current
-
1500
[mA]
Note 1
PDD
VDD Power
-
0.56
0.8
[Watt]
All Black Pattern
(VDD=3.3V, at 60Hz)
VDDrp
Allowable
Logic/LCD
-
100
[mV]
p-p
All Black Pattern
(VDD=3.3V, at 60Hz)
Drive Ripple Voltage
Product Specification
5.1.2 Signal Electrical Characteristics
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
Input signals shall be low or Hi-Z state when VDD is off.
Signal electrical characteristics are as follows;
Note: LVDS Signal Waveform.
G101EVN01.0 rev.3.0
12/24
Symbol
Item
Min.
Typ.
Max.
Unit
Remark
VTH
Differential Input High Threshold
---
100
[mV]
VCM=1.2V
VTL
Differential Input Low Threshold
-100
----
[mV]
VCM=1.2V
｜VID｜
Input Differential Voltage
100
600
[mV]
VICM
Differential Input Common Mode
Voltage
1.125
1.375
[V]
VTH/VTL=+-100mV
Product Specification
5.2 Backlight Unit
5.2.1 Parameter guideline for LED
Symbol Parameter Min. Typ. Max. Unit Remark
VLED
IVLED
PVLED
VEN_HI
VEN_LO
VLED_EN
FPWM
VPWM_HI
VPWM_LO
IF
Operation Life
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
Following characteristics are measured under a stable condition using an inverter at 25℃ (Room Temperature):
Note 1: Ta means ambient temperature of TFT-LCD module.
Note 2: VLED, IVLED, PVLED are defined for LED backlight.(100% duty of PWM dimming)
Note 3: If G101EVN01.0 module is driven by high current or at high ambient temperature & humidity condition. The
operating life will be reduced.
Note 4: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is
estimated data.
G101EVN01.0 rev.3.0
13/24
Input Voltage
5.5
-
12
[Volt]
Input Current
-
217
[mA]
100% Brightness
(VLED = 12V)
Power Consumption
-
-
2.6
[Watt]
100% Brightness
(VLED = 12V)
Enable Input High Level
2.5
-
5.5
[Volt]
Enable Input Low Level
-
-
0.8
[Volt]
Dimming Frequency
200
-
20K
[Hz]
PWM Dimming
Logic Input High Level
2.5
-
5.5
[Volt]
Logic Input Low Level
-
-
0.8
[Volt]
Dimming duty cycle
5
-
100
%
LED Forward Current
-
22
-
[mA]
Ta = 25oC
15,000
25,000
-
Hrs
(Ta=25℃), Note 2
IF=19mA
Product Specification
6. Signal Characteristic
6.1 Pixel Format Image
R G B R G B R G B R G B
R G B R G B R G B R G B
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
Following figure shows the relationship between input signal and LCD pixel format.
1st
2nd
799th
1280th
Pixel
Pixel
Pixel
Pixel
1st
Line
800th
Lin
G101EVN01.0 rev.3.0
14/24
Product Specification
6.3 Signal Description
6.3.1 LVDS Connector Description
Connector Name / Designation For Signal Connector
6.3.2 LVDS Pin Assignment
Pin No Symbol Function
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
The module uses a LVDS receiver embedded in AUO’s ASIC. LVDS is a differential signal technology for LCD
interface and a high-speed data transfer device.
Physical interface is described as for the connector on module.
These connectors are capable of accommodating the following signals and will be following components.
LVDS is a differential signal technology for LCD interface and high speed data transfer device.
G101EVN01.0 rev.3.0
15/24
Manufacturer
JAE or Compatible
Type / Part Number
JAE HD1S040HA1 or Compatible
Mating Housing/Part Number
IPEX 20453-040T-11or Compatible
1
NC
No Connection (Reserve)
2
VDD
Power Supply +3.3V
3
VDD
Power Supply +3.3V
4
VDD
Power Supply +3.3V
5
NC
No Connection (Reserve)
6
NC
No Connection (Reserve)
7
NC
No Connection (Reserve)
8
Rin0-
-LVDS differential data input(R0-R5,G0)
9
Rin0+
+LVDS differential data input(R0-R5,G0)
10
GND
Ground
11
Rin1-
-LVDS differential data input(G1-G5,B0-B1)
12
Rin1+
+LVDS differential data input(G1-G5,B0-B1)
13
GND
Ground
14
Rin2-
-LVDS differential data input(B2-B5,HS,VS,DE)
15
Rin2+
+LVDS differential data input(B2-B5,HS,VS,DE)
16
GND
Ground
17
ClkIN-
-LVDS differential clock input
18
ClkIN+
+LVDS differential clock input
19
GND
Ground–Shield
20
NC
No Connection (Reserve)
21
NC
No Connection (Reserve)
22
GND
Ground–Shield
Product Specification
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
Note 1: Input Signals shall be in low status when VDD is off.
Note 2: High stands for “3.3V”, Low stands for “0V”, NC means “No Connection”.
Note 3: RSV means “Reserved”.
G101EVN01.0 rev.3.0
16/24
23
NC
No Connection (Reserve)
24
NC
No Connection (Reserve)
25
GND
Ground–Shield
26
NC
No Connection (Reserve)
27
NC
No Connection (Reserve)
28
GND
Ground–Shield
29
NC
No Connection (Reserve)
30
NC
No Connection (Reserve)
31
VLED_GND
LED Ground
32
VLED_GND
LED Ground
33
VLED_GND
LED Ground
34
NC
No Connection (Reserve)
35
VPWM_EN
System PWM Logic Input Level
36
VLED_EN
LED enable input level
37
NC
No Connection (Reserve)
38
VLED
LED Power Supply
39
VLED
LED Power Supply
40
VLED
LED Power Supply
Product Specification
6.4 The Input Data Format
Signal Name Description
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
Note1: Input signals shall be low or High-impedance state when VDD is off.
Note: Output signals from any system shall be low or High-impedance state when VDD is off.
G101EVN01.0 rev.3.0
17/24
R5
R4
R3
R2
R1
R0
Red Data 5 (MSB)
Red Data 4
Red Data 3
Red Data 2
Red Data 1
Red Data 0 (LSB)
Red-pixel Data
Red-pixel Data
Each red pixel's brightness data consists of these 6 bits
pixel data.
G5
G4
G3
G2
G1
G0
Green Data 5 (MSB)
Green Data 4
Green Data 3
Green Data 2
Green Data 1
Green Data 0 (LSB)
Green-pixel Data
Green-pixel Data
Each green pixel's brightness data consists of these 6 bits
pixel data.
B5
B4
B3
B2
B1
B0
Blue Data 5 (MSB)
Blue Data 4
Blue Data 3
Blue Data 2
Blue Data 1
Blue Data 0 (LSB)
Blue-pixel Data
Blue-pixel Data
Each blue pixel's brightness data consists of these 6 bits
pixel data.
RxCLKIN
Data Clock
T h e signal is used to strobe the pixel data and DE signals.
All pixel data shall be valid at the falling edge when the DE
signal is high.
DE
Display Timing
This signal is strobed at the falling edge of
RxCLKIN. When the signal is high, the pixel data shall be
valid to be displayed.
VS
Vertical Sync
The signal is synchronized to RxCLKIN .
HS
Horizontal Sync
The signal is synchronized to RxCLKIN .
Product Specification
6.5 Interface Timing
6.5.1 Timing Characteristics
Signal Symbol Min. Typ. Max. Unit
6.5.2 Input Timing Diagram
TH
THB THD
TV
TVB TVD
Input Timing Definition ( DE Mode)
TCLOCK
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
Note : DE mode.
DOTCLK
Input
Invaild
Pixel
Pixel
Pixel
Pixel
Pixel
Invaild
Pixel
Data
Data
1
2
3
N-1
N
Data
1
DE
DE
G101EVN01.0 rev.3.0
18/24
Clock Frequency
1/ TClock
64
68.93
85
MHz
Vertical
Section
Period
TV
808
816
1023
TLine
Active
TVD
800
Blanking
TVB
8
16
223
Horizontal
Section
Period
TH
1310
1408
2047
TClock
Active
THD
1280
Blanking
THB
40
168
767
Frame Rate
F
---
60
---
Hz
Product Specification
6.6 Power ON/OFF Sequence
Power ON/OFF sequence timing
Value Units
Parameter Min. Typ. Max.
0.5 10
0 50
200 -
200 -
0 50
0 10
500 -
10 -
0 180
0 180
10 -
0.5 10
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
VDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from
any system shall be Hi-Z state or low level when VDD is off.
The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to
turn off the power when you plug the cable into the input connector or pull the cable out of the connector.
G101EVN01.0 rev.3.0
19/24
T1
[ms]
T2
[ms]
T3
[ms]
T4
[ms]
T5
[ms]
T6
[ms]
T7
[ms]
T8
[ms]
T9
[ms]
T10
[ms]
T11
[ms]
T12
[ms]
Product Specification
7. Reliability Test Criteria
Items Required Condition Note
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
Note1: According to EN61000-4-2 , ESD class B: Some performance degradation allowed. No data lost
. Self-recoverable. No hardware failures.
Note2:
l Water condensation is not allowed for each test items.
l Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability
test.
l The reliability test is performed only to examine the TFT-LCD module capability.
l To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for
24 hours at least in advance.
G101EVN01.0 rev.3.0
20/24
Temperature
Humidity Bias
40 oC /90%,300Hr
High Temperature
Operation
60 oC, 300Hr (center point of panel surface)
Low Temperature
Operation
-20 oC, 300Hr
Hot Storage
70 oC, 300Hr
Cold Storage
-30 oC, 300Hr
Thermal Shock
Test
-30 oC /30 min , 70 oC /30 min , 20cycles
Hot Start Test
60 oC /1 Hr min. power on/off per 5 minutes, 5 times
Cold Start Test
-20 oC /1 Hr min. power on/off per 5 minutes, 5 times
On/off test
On/10 sec, Off/10 sec, 30,000 cycles
ESD
Contact : ± 8KV/ operation, Class B
Air : ± 15KV / operation, Class B
Note 1
Product Specification
8. Mechanical Characteristics
8.1 LCM Outline Dimension (Front View)
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
G101EVN01.0 rev.3.0
21/24
Product Specification
8.2 LCM Outline Dimension (Rear View)
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
G101EVN01.0 rev.3.0
22/24
Product Specification
9. Label and Packaging
9.1 Shipping Label
9.2 Carton Package
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
(on the rear side of TFT-LCD display)
Max capacity：40 TFT-LCD module per carton
Max weight: 9.2 kg per carton
Outside dimension of carton: 484(L)*328(W)*257(H)mm
Pallet size：1450mm*980mm*138mm
G101EVN01.0 rev.3.0
23/24
Product Specification
10 Safety
10.1 Sharp Edge Requirements
10.2 Materials
10.2.1 Toxicity
10.2.2 Flammability
10.3 Capacitors
10.4 National Test Lab Requirement
TFT Display https:/www.distronik.de distronik GmbH
G101EVN01.0
AU OPTRONICS CORPORATION
There will be no sharp edges or comers on the display assembly that could cause injury.
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are
used, they will be reviewed and approved by the responsible AUO toxicologist.
All components including electrical components that do not meet the flammability grade UL94-V1 in
the module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability
rating will be printed on the printed circuit board.
If any polarized capacitors are used in the display assembly, provisions will be made to keep them from
being inserted backwards.
The display module will satisfy all requirements for compliance to:
UL 60950-1 second edition
U.S.A. Information Technology Equipment
G101EVN01.0 rev.3.0
24/24