Product Specification G101EVN01.0 AU OPTRONICS CORPORATION ( ) Preliminary Specifications ( V) Final Specifications Module 10.1 Inch Color TFT-LCD Model Name G101EVN01.0 Customer Date Checked & Approved by Approved by Date Debbie Chiu 2014/02/10 Prepared by ShengHsun Lin Note: This Specification is subject to change without notice. TFT Display https:/www.distronik.de 2014/02/10 General Display Business Division / AU Optronics corporation distronik GmbH G101EVN01.0 rev.3.0 1/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION Contents 1. Operating Precautions ..................................................................................... 4 2. General Description ......................................................................................... 5 2.1 Display Characteristics ............ ........... ............ ........... ............ ............ ........... ............ . 5 2.2 Optical Characteristics .......... ........... ............ ........... ............ ........... ............ ........... ..... 6 3. Functional Block Diagram ............................................................................... 9 4. Absolute Maximum Ratings........................................................................... 10 4.1 Absolute Ratings of TFT LCD Module............ ........... ............ ........... ............ ........... ... 10 4.2 Absolute Ratings of Environment...... ............ ........... ............ ........... ............ ........... ... 10 5. Electrical Characteristics............................................................................... 11 5.1 TFT LCD Module ............ ........... ............ ........... ............ ........... ............ ........... ......... 11 5.2 Backlight Unit ........... ............ ........... ............ ........... ............ ........... ............ ........... ... 13 6. Signal Characteristic...................................................................................... 14 6.1 Pixel Format Image............ ........... ............ ........... ............ ........... ............ ........... ...... 14 6.3 Signal Description ........... ........... ............ ........... ............ ........... ............ ........... ......... 15 6.4 The Input Data Format.......... ........... ............ ........... ............ ........... ............ ........... ... 17 6.5 Interface Timing ........... ........... ............ ........... ............ ........... ........... ............ ............ 18 6.6 Power ON/OFF Sequence .......... ............ ........... ............ ........... ............ ........... ......... 19 7. Reliability Test Criteria................................................................................... 20 8. Mechanical Characteristics ........................................................................... 21 8.1 LCM Outline Dimension (Front View).......... ........... ............ ........... ............ ........... ...... 21 8.2 LCM Outline Dimension (Rear View) .......... ........... ............ ........... ............ ........... ...... 22 9. Label and Packaging...................................................................................... 23 9.1 Shipping Label (on the rear side of TFT-LCD display) ............ ........... ............ ........... ... 23 9.2 Carton Package ........... ........... ............ ........... ............ ........... ........... ............ ............ 23 10 Safety.............................................................................................................. 24 10.1 Sharp Edge Requirements........... ............ ........... ............ ........... ............ ........... ...... 24 10.2 Materials .......... ............ ........... ............ ........... ............ ........... ............ ........... ......... 24 10.3 Capacitors........... ............ ........... ............ ........... ............ ........... ............ ........... ...... 24 10.4 National Test Lab Requirement........... ........... ............ ........... ............ ........... ............ 24 TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 2/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION Record of Revision Version and Date Page 0.0 Mar, 07, 2013 All 1.0 May, 14, 2013 -5 Old description First draft specification Final Specification New Description - Typical Power Consumption Correct the writing mistake. 13 Add LED Life time 25K (typical) 5 Add air tape thickness in module 5.54mm (max.) and update in 2D drawing 22 23 11 13 Update Power Specifiation table Note 2: VCC, IVCC, PVCC are defined for LED backlight. Note 2: VLED, IVLED, PVLED are defined for LED backlight. Add IVLED, PVLED range is under VLED =12V condition. 15 Correct the name of VDD. Outside dimension of carton: 374mm(L)* 320mm(W)*241mm(H) 24 Pallet size 1140 mm * 980 mm * 135mm Update Packing Cartion Condition Outside dimension of carton: 484(L)*328(W)*257(H)mm Pallet size 1450mm*980mm*138mm 2.0 3.0 July, 10, 2013 Feb, 10, 2014 TFT Display 13 Old Vled Electrical Charateristics Table Update Vled Electrical Charateristics Table 15 Old Pin Assignment. Update Pin Assignment. 10 Old Absolute Ratings of Environment Update the range of Absolute Ratings of Environment https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 3/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 1. Operating Precautions 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) Since front polarizer is easily damaged, please be cautious and not to scratch it. Be sure to turn off power supply when inserting or disconnecting from input connector. Wipe off water drop immediately. Long contact with water may cause discoloration or spots. When the panel surface is soiled, wipe it with absorbent cotton or soft cloth. Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface. To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module. Do not open nor modify the module assembly. Do not press the reflector sheet at the back of the module to any direction. In case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged. At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time. Please design your display product well to avoid external force applying to module by end-user directly. Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. Severe temperature condition may result in different luminance, response time and lamp ignition voltage. Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion and reduce luminance dramatically. The data on this specification sheet is applicable when LCD module is placed in landscape position. Continuous displaying fixed pattern may induce image sticking. It's recommended to use screen saver or shuffle content periodically if fixed pattern is displayed on the screen. TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 4/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 2. General Description G101EVN01.0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the 16:10 WXGA, 1280(H) x800(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight driving circuit. All input signals are LVDS interface compatible. G101EVN01.0 is designed for a display unit of notebook style personal computer and industrial machine. 2.1 Display Characteristics The following items are characteristics summary on the table under 25 oC condition: Items Unit Specifications Screen Diagonal [inch] 10.1" Active Area [mm] 216.96(H) x 135.6(V) Pixels H x V Pixel Pitch 1280 x 3(RGB) x 800 [mm] 0.1695 X 0.1695 Pixel Arrangement R.G.B. Vertical Stripe Display Mode MVA, Normally Black Nominal Input Voltage VDD [Volt] 3.3 (Typical) Power Consumption [Watt] 3.4 max. (Include Logic and Blu power) Weight [Grams] 187g max. Physical Size [mm] 229.460.5(H) x 149.20.5(V) x 4.96(max.)(T) (without air tape) /5.54(max.)(T) (with air tape) Electrical Interface LVDS Surface Treatment Anti-Reflection1.5%, Hardness 3H Anti- Static Support Color 262K colors ( RGB 6-bit ) Temperature Range Operating Storage (Non-Operating) RoHS Compliance TFT Display [oC] [oC] -20 to +60 -30 to +70 RoHS Compliance https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 5/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 2.2 Optical Characteristics The optical characteristics are measured under stable conditions at 25 oC (Room Temperature): Item Unit Conditions Min. Typ. Max. ILED= 25mA White Luminance [cd/m2] 255 300 (5p average) Uniformity 5 points % 80% Contrast Ratio Response Time Viewing Angle 1000 1300 - Rising + Falling --- 25 35 [degree] [degree] Horizontal CR = 10 (Right) (Left) 80 85 --- 80 85 --- [degree] [degree] Vertical CR = 10 (Upper) (Lower) 80 85 --- 80 0.549 0.308 0.295 0.53 0.122 0.095 0.283 0.299 85 0.579 0.338 0.325 0.56 0.152 0.125 0.313 0.329 --0.609 0.368 0.355 0.59 0.182 0.155 0.343 0.359 - 45 - [msec] Rising [msec] Falling [msec] Red x Red y Green x Green y Blue x Blue y White x White y Color / Chromaticity Coordinates (CIE 1931) Color Gamut Note % Note 1: Measurement method Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent) Aperture Field angle 2with 50cm measuring distance Test Point Follow Note 2 position Environment < 1 lux LCD Module Field angle SR_3 or equivalent Measuring distance Module Driving Equipment TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 6/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION Note 2: Definition of 5 points position (Display active area: 216.96(H) x 135.6(V)) W W /4 W /4 W /4 W /4 H /4 2 1 H /4 3 H H /4 4 5 H /4 Note 3: The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum test point luminance Minimum Brightness of five points W9 = Maximum Brightness of five points Note 4: Definition of contrast ratio (CR): Contrast ratio (CR)= Brightness on the "White" state Brightness on the "Black" state Note 5: Definition of response time: The output signals of photo detector are measured when the input signals are changed from "White" to "Black" (falling time) and from "Black" to "White" (rising time), respectively. The response time interval is between 10% and 90% of amplitudes. Please refer to the figure as below. % Tf Tr 100 90 Optical White Black White response 10 0 TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 7/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION Note 6: Definition of viewing angle Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). The 180 viewing angle range is broken down as below: 90 () horizontal left and right, and 90 () vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated to its center to develop the desired measurement viewing angle. TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 8/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 3. Functional Block Diagram The following diagram shows the functional block of the 10.1 inch color TFT/LCD module: TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 9/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 4. Absolute Maximum Ratings 4.1 Absolute Ratings of TFT LCD Module Item Symbol Min Max Unit Logic/LCD drive Voltage Vin -0.3 +4.0 [Volt] 4.2 Absolute Ratings of Environment Item Symbol Min Max Unit Operating Temperature TOP -20 +60 [oC] Operation Humidity HOP 5 90 [%RH] Storage Temperature TST -30 +70 [oC] Storage Humidity HST 5 90 [%RH] Note 1: At Ta (25 ) Note 2: Permanent damage to the device may occur if exceed maximum values T=40, H=90% T=60, H=50% T=70, H=30% Operating Range TFT Display Storage Range https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 10/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 5. Electrical Characteristics 5.1 TFT LCD Module 5.1.1 Power Specification The power specification are measured under 25 and frame frenquency under 60Hz Symbol Parameter Min Typ Max Units 3.0 3.3 3.6 [Volt] VDD Logic/LCD Drive Voltage IDD VDD Current - 170 245 [mA] Irush LCD Inrush Current - - 1500 [mA] PDD VDD Power - 0.56 0.8 [Watt] Allowable Logic/LCD Drive Ripple Voltage - - 100 [mV] p-p VDDrp Remark All Black Pattern (VDD=3.3V, at 60Hz) Note 1 All Black Pattern (VDD=3.3V, at 60Hz) All Black Pattern (VDD=3.3V, at 60Hz) Note 1 : Maximum Measurement ConditionWhite Pattern at 3.3V driving voltage. (Pmax=V3.3 x Iwhite) Note 2Measure Condition 3.3V 90% 10% 0V 0.5ms VDD rising time TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 11/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 5.1.2 Signal Electrical Characteristics Input signals shall be low or Hi-Z state when VDD is off. Signal electrical characteristics are as follows; Symbol Item Min. Typ. Max. Unit Remark VTH Differential Input High Threshold --- 100 [mV] VCM=1.2V VTL Differential Input Low Threshold -100 ---- [mV] VCM=1.2V Input Differential Voltage 100 600 [mV] 1.125 1.375 [V] VID VICM Differential Input Common Mode Voltage VTH/VTL=+-100mV Note: LVDS Signal Waveform. TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 12/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 5.2 Backlight Unit 5.2.1 Parameter guideline for LED Following characteristics are measured under a stable condition using an inverter at 25 (Room Temperature): Symbol Parameter Min. Typ. Max. Unit VLED Input Voltage 5.5 - 12 [Volt] IVLED Input Current - 217 [mA] PVLED Power Consumption - - 2.6 [Watt] VEN_HI Enable Input High Level 2.5 - 5.5 [Volt] VEN_LO Enable Input Low Level - - 0.8 [Volt] FPWM Dimming Frequency 200 - 20K [Hz] VPWM_HI Logic Input High Level 2.5 - 5.5 [Volt] VPWM_LO Logic Input Low Level - - 0.8 [Volt] Dimming duty cycle 5 - 100 % LED Forward Current - 22 - [mA] 15,000 25,000 - Hrs IF Remark 100% Brightness (VLED = 12V) 100% Brightness (VLED = 12V) VLED_EN Operation Life PWM Dimming Ta = 25oC (Ta=25), Note 2 IF=19mA Note 1: Ta means ambient temperature of TFT-LCD module. Note 2: VLED, IVLED, PVLED are defined for LED backlight.(100% duty of PWM dimming) Note 3: If G101EVN01.0 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced. Note 4: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated data. TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 13/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 6. Signal Characteristic 6.1 Pixel Format Image Following figure shows the relationship between input signal and LCD pixel format. 1st Line 1st 2nd 799th 1280th Pixel Pixel Pixel Pixel R G B R G B R G B R G B R G B R G B R G B R G B th 800 Lin TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 14/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 6.3 Signal Description The module uses a LVDS receiver embedded in AUO's ASIC. LVDS is a differential signal technology for LCD interface and a high-speed data transfer device. 6.3.1 LVDS Connector Description Physical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components. Connector Name / Designation For Signal Connector Manufacturer JAE or Compatible Type / Part Number JAE HD1S040HA1 or Compatible Mating Housing/Part Number IPEX 20453-040T-11or Compatible 6.3.2 LVDS Pin Assignment LVDS is a differential signal technology for LCD interface and high speed data transfer device. Pin No TFT Display Symbol Function 1 NC No Connection (Reserve) 2 VDD Power Supply +3.3V 3 VDD Power Supply +3.3V 4 VDD Power Supply +3.3V 5 NC No Connection (Reserve) 6 NC No Connection (Reserve) 7 NC No Connection (Reserve) 8 Rin0- -LVDS differential data input(R0-R5,G0) 9 Rin0+ +LVDS differential data input(R0-R5,G0) 10 GND Ground 11 Rin1- -LVDS differential data input(G1-G5,B0-B1) 12 Rin1+ +LVDS differential data input(G1-G5,B0-B1) 13 GND Ground 14 Rin2- -LVDS differential data input(B2-B5,HS,VS,DE) 15 Rin2+ +LVDS differential data input(B2-B5,HS,VS,DE) 16 GND Ground 17 ClkIN- -LVDS differential clock input 18 ClkIN+ +LVDS differential clock input 19 GND Ground-Shield 20 NC No Connection (Reserve) 21 NC No Connection (Reserve) 22 GND Ground-Shield https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 15/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 23 NC No Connection (Reserve) 24 NC No Connection (Reserve) 25 GND Ground-Shield 26 NC No Connection (Reserve) 27 NC No Connection (Reserve) 28 GND Ground-Shield 29 NC No Connection (Reserve) 30 NC No Connection (Reserve) 31 VLED_GND LED Ground 32 VLED_GND LED Ground 33 VLED_GND LED Ground 34 NC No Connection (Reserve) 35 VPWM_EN System PWM Logic Input Level 36 VLED_EN LED enable input level 37 NC No Connection (Reserve) 38 VLED LED Power Supply 39 VLED LED Power Supply 40 VLED LED Power Supply Note 1: Input Signals shall be in low status when VDD is off. Note 2: High stands for "3.3V", Low stands for "0V", NC means "No Connection". Note 3: RSV means "Reserved". TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 16/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION Note1: Input signals shall be low or High-impedance state when VDD is off. 6.4 The Input Data Format Signal Name R5 R4 R3 R2 R1 R0 Description Red Data 5 (MSB) Red Data 4 Red Data 3 Red Data 2 Red Data 1 Red Data 0 (LSB) Red-pixel Data Each red pixel's brightness data consists of these 6 bits pixel data. Red-pixel Data G5 G4 G3 G2 G1 G0 Green Data 5 (MSB) Green Data 4 Green Data 3 Green Data 2 Green Data 1 Green Data 0 (LSB) B5 B4 B3 B2 B1 B0 Green-pixel Data Blue Data 5 (MSB) Blue Data 4 Blue Data 3 Blue Data 2 Blue Data 1 Blue Data 0 (LSB) RxCLKIN Blue-pixel Data Data Clock DE Display Timing VS HS Vertical Sync Horizontal Sync Green-pixel Data Each green pixel's brightness data consists of these 6 bits pixel data. Blue-pixel Data Each blue pixel's brightness data consists of these 6 bits pixel data. The signal is used to strobe the pixel data and DE signals. All pixel data shall be valid at the falling edge when the DE signal is high. This signal is strobed at the falling edge of RxCLKIN. When the signal is high, the pixel data shall be valid to be displayed. The signal is synchronized to RxCLKIN . The signal is synchronized to RxCLKIN . Note: Output signals from any system shall be low or High-impedance state when VDD is off. TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 17/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 6.5 Interface Timing 6.5.1 Timing Characteristics Signal Symbol Min. Typ. Max. Unit Clock Frequency 1/ TClock 64 68.93 85 MHz Period TV 808 816 1023 Active TVD Blanking TVB 8 16 223 Period TH 1310 1408 2047 Active THD Blanking THB 40 168 767 F --- 60 --- Vertical Section Horizontal Section Frame Rate Note : DE mode. 800 TLine 1280 TClock Hz 6.5.2 Input Timing Diagram Input Timing Definition ( DE Mode) TCLOCK DOTCLK Input Data Invaild Data Pixel 1 Pixel 2 Pixel 3 Pixel N-1 Pixel N Invaild Data Pixel 1 DE THB THD TH DE TVB TVD TV TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 18/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 6.6 Power ON/OFF Sequence VDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off. Power ON/OFF sequence timing Value Parameter Min. Typ. Units Max. T1 0.5 10 [ms] T2 0 50 [ms] T3 200 - [ms] T4 200 - [ms] T5 0 50 [ms] T6 0 10 [ms] T7 500 - [ms] T8 10 - [ms] T9 0 180 [ms] T10 0 180 [ms] T11 10 - [ms] T12 0.5 10 [ms] The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 19/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 7. Reliability Test Criteria Items Required Condition Temperature o 40 C /90%,300Hr Humidity Bias High Temperature 60 oC, 300Hr (center point of panel surface) Operation Low Temperature o -20 C, 300Hr Operation Hot Storage 70 oC, 300Hr Cold Storage -30 oC, 300Hr Thermal Shock Test -30 oC /30 min , 70 oC /30 min , 20cycles Hot Start Test 60 oC /1 Hr min. power on/off per 5 minutes, 5 times Cold Start Test -20 C /1 Hr min. power on/off per 5 minutes, 5 times On/off test On/10 sec, Off/10 sec, 30,000 cycles o Contact : 8KV/ operation, Class B ESD Note Note 1 Air : 15KV / operation, Class B Note1: According to EN61000-4-2 , ESD class B: Some performance degradation allowed. No data lost . Self-recoverable. No hardware failures. Note2: l Water condensation is not allowed for each test items. l Each test is done by new TFT-LCD module. Don't use the same TFT-LCD module repeatedly for reliability test. l The reliability test is performed only to examine the TFT-LCD module capability. l To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance. TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 20/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 8. Mechanical Characteristics 8.1 LCM Outline Dimension (Front View) G101EVN01.0 rev.3.0 TFT Display https:/www.distronik.de distronik GmbH 21/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 8.2 LCM Outline Dimension (Rear View) G101EVN01.0 rev.3.0 TFT Display https:/www.distronik.de distronik GmbH 22/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 9. Label and Packaging 9.1 Shipping Label (on the rear side of TFT-LCD display) 9.2 Carton Package Max capacity40 TFT-LCD module per carton Max weight: 9.2 kg per carton Outside dimension of carton: 484(L)*328(W)*257(H)mm Pallet size1450mm*980mm*138mm TFT Display https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 23/24 Product Specification G101EVN01.0 AU OPTRONICS CORPORATION 10 Safety 10.1 Sharp Edge Requirements There will be no sharp edges or comers on the display assembly that could cause injury. 10.2 Materials 10.2.1 Toxicity There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist. 10.2.2 Flammability All components including electrical components that do not meet the flammability grade UL94-V1 in the module will complete the flammability rating exception approval process. The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be printed on the printed circuit board. 10.3 Capacitors If any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards. 10.4 National Test Lab Requirement The display module will satisfy all requirements for compliance to: UL 60950-1 second edition TFT Display U.S.A. Information Technology Equipment https:/www.distronik.de distronik GmbH G101EVN01.0 rev.3.0 24/24