• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
Inductors for High-frequency Circuits
Multilayer/High-SRF
MLK series
Type:
Issue date:
MLK0603 0603[0201 inch]*
MLK1005 1005[0402 inch]
* Dimensions Code JIS[EIA]
November 2011
• All specifications are subject to change without notice.
001-04 / 20111129 / e521_mlk
(1/7)
Inductors for High-frequency Circuits
Multilayer/High-SRF
MLK Series MLK0603
FEATURES
• Inductance values are supported from 1 to 33nH.
• With the adoption of a giga-spiral laminated structure, self-
resonant frequency higher than that of the MLG structure can be
obtained, while the decrease of Q in the GHz band is limited.
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
• There is no directivity.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
APPLICATIONS
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTE RN
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions L×W
(3) Type name
(4) Inductance
(5) Tolerance
(6) Packaging style
(7) TDK internal code
SPECIFICATIONS
PACKAGING STYLE AND QUANTITIES
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
Conformity to RoHS Directive
0.6±0.03
0.15±0.05
0.3±0.03
0.3±0.03
Dimensions in mm
Weight: 0.2mg
0.3 0.250.25
0.3
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
MLK 0603 L 10N J T
(1) (2) (3) (4) (5) (6) (7)
0603 0.6×0.3mm (L×W)
2N2 2.2nH
12N 12nH
S ±0.3nH
J±5%
T Taping (reel)
Operating temperature range –55 to +125°C
Storage temperature range –55 to +125°C(After mount)
Packaging style Quantity
Taping 15000 pieces/reel
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
001-04 / 20111129 / e521_mlk
(2/7)
ELECTRICAL CHARACTERISTICS
• Test equipment
Inductance Q : HP4291A+16197A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
L, Q vs. FREQUENCY CHARACTERISTICS
Inductance
(nH)
Inductance
tolerance
Te s t
frequency L
(MHz)
Q
min.
Test
frequency Q
(MHz)
Self-resonant
frequency
(GHz)
DC resistance
(Ω)Rated current
(mA)max. Part No.
min. typ. max. typ.
1.0 ±0.3nH 100 6 300 12.0 17.1 0.20 0.09 300 MLK0603L1N0ST
1.1 ±0.3nH 100 6 300 11.0 17.1 0.22 0.10 300 MLK0603L1N1ST
1.2 ±0.3nH 100 6 300 11.0 16.1 0.22 0.11 300 MLK0603L1N2ST
1.3 ±0.3nH 100 6 300 10.0 15.8 0.24 0.12 300 MLK0603L1N3ST
1.5 ±0.3nH 100 6 300 10.0 14.9 0.24 0.12 300 MLK0603L1N5ST
1.6 ±0.3nH 100 6 300 10.0 14.3 0.27 0.13 300 MLK0603L1N6ST
1.8 ±0.3nH 100 6 300 10.0 13.8 0.27 0.14 300 MLK0603L1N8ST
2.0 ±0.3nH 100 6 300 9.0 12.6 0.30 0.15 300 MLK0603L2N0ST
2.2 ±0.3nH 100 6 300 9.0 12.5 0.30 0.17 300 MLK0603L2N2ST
2.4 ±0.3nH 100 6 300 8.5 11.4 0.35 0.17 300 MLK0603L2N4ST
2.7 ±0.3nH 100 6 300 8.5 10.9 0.35 0.18 300 MLK0603L2N7ST
3.0 ±0.3nH 100 6 300 8.0 10.6 0.40 0.20 200 MLK0603L3N0ST
3.3 ±0.3nH 100 6 300 8.0 10.5 0.40 0.22 200 MLK0603L3N3ST
3.6 ±0.3nH 100 6 300 8.0 9.9 0.45 0.22 200 MLK0603L3N6ST
3.9 ±0.3nH 100 6 300 8.0 9.8 0.45 0.25 200 MLK0603L3N9ST
4.3 ±0.3nH 100 6 300 7.5 9.5 0.50 0.28 200 MLK0603L4N3ST
4.7 ±0.3nH 100 6 300 7.5 9.5 0.50 0.28 200 MLK0603L4N7ST
5.1 ±0.3nH 100 6 300 6.5 8.8 0.60 0.28 200 MLK0603L5N1ST
5.6 ±0.3nH 100 6 300 6.5 8.5 0.60 0.30 200 MLK0603L5N6ST
6.2 ±0.3nH 100 6 300 6.0 8.3 0.65 0.34 200 MLK0603L6N2ST
6.8 ±5% 100 6 300 6.0 8.1 0.65 0.34 200 MLK0603L6N8JT
7.5 ±5% 100 6 300 6.0 7.7 0.70 0.36 200 MLK0603L7N5JT
8.2 ±5% 100 6 300 6.0 7.9 0.70 0.41 200 MLK0603L8N2JT
9.1 ±5% 100 6 300 5.5 7.4 0.80 0.42 200 MLK0603L9N1JT
10 ±5% 100 6 300 5.5 7.5 0.80 0.48 200 MLK0603L10NJT
12 ±5% 100 6 300 5.0 6.9 1.00 0.54 150 MLK0603L12NJT
15 ±5% 100 6 300 4.5 6.6 1.10 0.66 150 MLK0603L15NJT
18 ±5% 100 6 300 4.0 5.8 1.30 0.85 100 MLK0603L18NJT
22 ±5% 100 6 300 3.5 5.3 1.60 1.02 100 MLK0603L22NJT
27 ±5% 100 6 300 3.0 4.6 1.70 1.09 100 MLK0603L27NJT
33 ±5% 100 6 300 2.8 4.4 1.80 1.21 100 MLK0603L33NJT
Part No. Inductance(nH)typ. Q typ.
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
MLK0603L1N0ST 0.9 0.9 0.9 0.9 0.9 10 12 19 20 22
MLK0603L1N1ST 1.0 1.0 0.9 0.9 0.9 9 11 17 18 20
MLK0603L1N2ST 1.1 1.0 1.0 1.0 1.0 9 12 18 19 21
MLK0603L1N3ST 1.2 1.1 1.1 1.1 1.1 9 12 18 19 21
MLK0603L1N5ST 1.3 1.3 1.3 1.3 1.3 9 12 18 19 21
MLK0603L1N6ST 1.4 1.4 1.4 1.4 1.4 9 12 18 19 21
MLK0603L1N8ST 1.6 1.6 1.6 1.6 1.6 9 11 17 18 20
MLK0603L2N0ST 1.8 1.7 1.7 1.7 1.7 9 12 17 18 20
MLK0603L2N2ST 2.0 1.9 1.9 1.9 2.0 10 12 19 20 22
MLK0603L2N4ST 2.1 2.1 2.1 2.1 2.1 9 12 18 19 20
MLK0603L2N7ST 2.4 2.4 2.4 2.4 2.4 10 13 19 20 22
MLK0603L3N0ST 2.7 2.6 2.6 2.6 2.7 9 12 18 19 21
MLK0603L3N3ST 3.0 2.9 2.9 3.0 3.0 10 13 19 20 22
MLK0603L3N6ST 3.2 3.1 3.1 3.1 3.2 9 11 17 18 19
MLK0603L3N9ST 3.5 3.4 3.5 3.5 3.5 10 13 19 20 22
MLK0603L4N3ST 3.8 3.8 3.8 3.8 3.9 10 12 18 19 20
MLK0603L4N7ST 4.2 4.2 4.2 4.2 4.3 10 13 19 20 22
MLK0603L5N1ST 4.6 4.5 4.5 4.6 4.7 10 12 18 19 21
MLK0603L5N6ST 5.0 5.0 5.0 5.0 5.1 10 12 18 19 21
MLK0603L6N2ST 5.5 5.5 5.5 5.6 5.7 10 12 18 19 20
MLK0603L6N8JT 6.2 6.1 6.2 6.2 6.4 10 13 19 20 22
MLK0603L7N5JT 6.7 6.6 6.7 6.8 7.0 10 12 18 19 20
MLK0603L8N2JT 7.4 7.3 7.5 7.6 7.8 10 13 19 20 21
MLK0603L9N1JT 8.2 8.1 8.3 8.4 8.6 10 12 18 18 20
MLK0603L10NJT 9.0 8.9 9.2 9.3 9.6 10 13 18 19 20
MLK0603L12NJT 10.8 10.6 11.0 11.2 11.6 10 12 18 18 20
MLK0603L15NJT 13.5 13.4 13.9 14.2 14.8 10 12 17 18 19
MLK0603L18NJT 16.2 16.1 17.0 17.4 18.4 10 12 16 17 18
MLK0603L22NJT 19.8 19.7 20.9 21.5 22.8 10 12 16 16 17
MLK0603L27NJT 24.4 24.4 27.2 28.6 31.7 10 12 15 15 14
MLK0603L33NJT 29.7 29.7 33.4 35.1 39.3 9 11 14 14 13
• All specifications are subject to change without notice.
001-04 / 20111129 / e521_mlk
(3/7)
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS Q vs. FREQUENCY CHARACTERISTICS
PACKAGING STYLES
REEL DIMENSIONS
TAPE DIMENSIONS
10 100 1000 10000
0
1
10
100
1000
Frequency(MHz)
Inductance(nH)
3.3nH
1.0nH
10nH
33nH
10 100 1000 10000
0
10
20
30
Frequency(MHz)
Q
3.3nH
1.0nH
10nH
33nH
1.0
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
ø60min.
14.4max.
Dimensions in mm
8.4 +2.0
–0.0
8.0±0.3 3.5±0.05
1.75±0.1
4.0±0.1
2.0±0.05 2.0±0.05
Sprocket hole Cavity
1.5 +0.1
–0.0
0.5max. 0.38±0.05
0.68±0.05
160min. Taping 200min.
300min.
Drawing direction
Dimensions in mm
• All specifications are subject to change without notice.
(4/7)
001-04 / 20111129 / e521_mlk
Inductors for High-frequency Circuits
Multilayer/High-SRF
MLK Series MLK1005
FEATURES
• Inductance values are supported from 1 to 100nH.
• With the adoption of a giga-spiral laminated structure, self-
resonant frequency higher than that of the MLG structure can be
obtained, while the decrease of Q in the GHz band is limited.
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
• There is no directivity.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
APPLICATIONS
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERN
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions L×W
(3 Type name
(4) Inductance
(5) Tolerance
(6) Packaging style
(7) TDK internal code
SPECIFICATIONS
PACKAGING STYLE AND QUANTITIES
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
Conformity to RoHS Directive
1±0.1
0.1min.
0.5±0.1
0.5±0.1
Weight: 1.0mg
Dimensions in mm
0.40.5 0.5
0.5
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
MLK 1005 S 2N2 S T
(1) (2) (3) (4) (5) (6) (7)
1005 1.0×0.5mm (L×W)
2N2 2.2nH
12N 12nH
R10 100nH
S ±0.3nH
J±5%
T Taping (reel)
Operating temperature range –55 to +125°C
Storage temperature range –55 to +125°C(After mount)
Packaging style Quantity
Taping 10000 pieces/reel
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(5/7)
001-04 / 20111129 / e521_mlk
ELECTRICAL CHARACTERISTICS
∗ : Please specify inductance tolerance, S (±0.3nH) or J (±5%).
• Test equipment
Inductance Q : HP4291A+16193A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Self-resonant
frequency
(GHz)
DC resistance
(Ω)Rated current
(mA)max. Part No.∗
min. typ. max. typ.
1.0 ±0.3nH 5 100 12.0 16.9 0.10 0.05 500 MLK1005S1N0T
1.1 ±0.3nH 5 100 11.5 14.8 0.12 0.05 500 MLK1005S1N1T
1.2 ±0.3nH 5 100 11.0 14.4 0.12 0.05 500 MLK1005S1N2T
1.3 ±0.3nH 5 100 10.0 12.6 0.15 0.06 500 MLK1005S1N3T
1.5 ±0.3nH 6 100 9.5 12.2 0.15 0.06 500 MLK1005S1N5T
1.6 ±0.3nH 6 100 9.0 11.9 0.17 0.06 500 MLK1005S1N6T
1.8 ±0.3nH 6 100 8.5 10.9 0.17 0.07 500 MLK1005S1N8T
2.0 ±0.3nH 6 100 8.3 10.0 0.18 0.08 500 MLK1005S2N0T
2.2 ±0.3nH 6 100 8.0 9.6 0.18 0.08 500 MLK1005S2N2T
2.4 ±0.3nH 6 100 7.8 9.5 0.20 0.09 500 MLK1005S2N4T
2.7 ±0.3nH 6 100 7.5 9.1 0.20 0.10 500 MLK1005S2N7T
3.0 ±0.3nH 6 100 7.2 8.5 0.22 0.10 400 MLK1005S3N0T
3.3 ±0.3nH 7 100 7.0 8.3 0.22 0.11 400 MLK1005S3N3T
3.6 ±0.3nH 7 100 6.8 8.1 0.25 0.11 400 MLK1005S3N6T
3.9 ±0.3nH 7 100 6.5 7.8 0.25 0.12 400 MLK1005S3N9T
4.3 ±0.3nH 7 100 6.3 7.4 0.28 0.13 400 MLK1005S4N3T
4.7 ±0.3nH 7 100 6.0 6.9 0.28 0.13 400 MLK1005S4N7T
5.1 ±0.3nH 7 100 5.8 7.0 0.30 0.15 400 MLK1005S5N1T
5.6 ±0.3nH 7 100 5.7 6.7 0.30 0.15 400 MLK1005S5N6T
6.2 ±0.3nH 7 100 5.6 6.5 0.35 0.18 400 MLK1005S6N2T
6.8 ±5% 7 100 5.5 6.3 0.35 0.18 400 MLK1005S6N8T
7.5 ±5% 7 100 5.0 6.0 0.38 0.20 350 MLK1005S7N5T
8.2 ±5% 7 100 5.0 6.0 0.38 0.21 350 MLK1005S8N2T
9.1 ±5% 7 100 4.8 5.9 0.42 0.23 350 MLK1005S9N1T
10 ±5% 7 100 4.7 5.2 0.42 0.23 350 MLK1005S10NT
12 ±5% 7 100 4.3 5.3 0.47 0.27 350 MLK1005S12NT
15 ±5% 7 100 4.0 4.8 0.50 0.33 300 MLK1005S15NT
18 ±5% 7 100 4.0 4.7 0.60 0.38 250 MLK1005S18NT
22 ±5% 7 100 3.5 4.4 0.70 0.46 200 MLK1005S22NT
27 ±5% 7 100 3.0 3.9 0.80 0.53 200 MLK1005S27NT
33 ±5% 7 100 2.5 3.5 0.90 0.59 200 MLK1005S33NT
39 ±5% 6 100 2.0 3.1 1.00 0.65 200 MLK1005S39NT
47 ±5% 6 100 1.8 3.0 1.20 0.74 200 MLK1005S47NT
56 ±5% 6 100 1.5 2.6 1.30 0.84 200 MLK1005S56NT
68 ±5% 6 100 1.4 2.4 1.50 1.01 150 MLK1005S68NT
82 ±5% 6 100 1.3 2.2 1.80 1.39 150 MLK1005S82NT
100 ±5% 6 100 1.1 1.9 2.20 1.60 100 MLK1005SR10T
110 ±5% 6 100 1.1 2.0 2.70 1.89 100 MLK1005SR11T
120 ±5% 6 100 1.1 1.9 3.00 2.08 100 MLK1005SR12T
130 ±5% 6 100 1.1 1.8 3.30 2.28 100 MLK1005SR13T
150 ±5% 6 100 1.1 1.7 5.00 3.58 80 MLK1005SR15T
160 ±5% 6 100 1.1 1.7 5.20 3.79 80 MLK1005SR16T
180 ±5% 6 100 1.1 1.6 6.00 4.28 80 MLK1005SR18T
200 ±5% 6 100 1.1 1.5 6.20 4.56 70 MLK1005SR20T
220 ±5% 6 100 1.0 1.4 6.20 4.54 70 MLK1005SR22T
240 ±5% 6 100 1.0 1.3 6.50 4.84 70 MLK1005SR24T
270 ±5% 6 100 0.9 1.2 6.50 4.78 70 MLK1005SR27T
300 ±5% 6 100 0.9 1.2 7.50 5.37 70 MLK1005SR30T
330 ±5% 6 100 0.85 1.1 8.00 5.82 70 MLK1005SR33T
• All specifications are subject to change without notice.
(6/7)
001-04 / 20111129 / e521_mlk
L, Q vs. FREQUENCY CHARACTERISTICS
Part No. Inductance(nH)typ. Q typ.
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
MLK1005S1N0 0.9 0.9 0.9 0.9 0.9 16 20 30 32 36
MLK1005S1N1 1.0 1.0 1.0 1.0 1.0 16 20 32 35 39
MLK1005S1N2 1.1 1.1 1.1 1.1 1.1 15 18 28 30 33
MLK1005S1N3 1.2 1.2 1.2 1.2 1.2 17 20 33 35 39
MLK1005S1N5 1.4 1.4 1.4 1.4 1.4 15 19 29 31 34
MLK1005S1N6 1.5 1.5 1.5 1.5 1.5
17 21 34 36 40
MLK1005S1N8 1.7 1.7 1.7 1.7 1.7 16 21 32 33 37
MLK1005S2N0 1.9 1.8 1.9 1.9 1.9
16 20 32 34 38
MLK1005S2N2 2.0 2.0 2.0 2.0 2.1 15 19 29 31 34
MLK1005S2N4 2.2 2.2 2.2 2.3 2.3
16 20 32 34 38
MLK1005S2N7 2.5 2.5 2.5 2.6 2.6 17 22 33 35 39
MLK1005S3N0 2.8 2.8 2.8 2.9 2.9
18 22 35 36 41
MLK1005S3N3 3.1 3.1 3.1 3.1 3.2 16 20 31 32 36
MLK1005S3N6 3.4 3.3 3.4 3.5 3.5
17 22 33 35 39
MLK1005S3N9 3.7 3.6 3.7 3.7 3.8 17 21 32 33 37
MLK1005S4N3 4.0 4.0 4.1 4.2 4.3
17 22 34 35 39
MLK1005S4N7 4.4 4.4 4.5 4.6 4.7 17 22 33 35 38
MLK1005S5N1 4.8 4.8 4.9 5.0 5.1
17 22 33 35 38
MLK1005S5N6 5.3 5.2 5.4 5.5 5.7 17 22 33 34 38
MLK1005S6N2 5.8 5.8 6.0 6.2 6.4
18 23 34 35 39
MLK1005S6N8 6.4 6.4 6.6 6.7 7.0 17 22 32 33 36
MLK1005S7N5 7.1 7.0 7.4 7.6 7.9
18 23 34 36 38
MLK1005S8N2 7.7 7.7 8.1 8.3 8.6 19 23 34 36 38
MLK1005S9N1 8.6 8.6 9.1 9.3 9.7
18 23 34 36 38
MLK1005S10N 9.4 9.4 10.0 10.2 10.7 19 23 34 35 38
MLK1005S12N 11.3 11.3 12.1 12.4 13.0 19 23 34 35 37
MLK1005S15N 14.2 14.2 15.3 15.8 16.8 18 23 33 34 35
MLK1005S18N 17.0 17.1 18.6 19.2 20.6 18 23 32 33 34
MLK1005S22N 20.8 20.9 23.0 23.9 25.8 18 23 32 33 34
MLK1005S27N 25.6 25.9 29.8 31.5 35.7 18 23 30 30 28
MLK1005S33N 31.4 31.9 37.6 40.2 18 23 29 29
MLK1005S39N 37.2 38.1 48.9 17 21 24
MLK1005S47N 45.0 46.2 60.6 18 21 24
MLK1005S56N 53.7 55.4 76.7 17 21 22
MLK1005S68N 65.5 68.4 105.6 17 20 18
MLK1005S82N 79.3 83.6 142.7 16 19 15
MLK1005SR10 97.1 103.2 199.4 15 18 13
MLK1005SR11 107.8 115.9 16 18
MLK1005SR12 118.0 127.8 16 18
MLK1005SR13 127.5 139.5 14 16
MLK1005SR15 149.4 166.0 16 17
MLK1005SR16 160.5 179.4 16 18
MLK1005SR18 181.1 204.1 16 17
MLK1005SR20 202.8 231.9 15 17
MLK1005SR22 225.7 266.8 15 15
MLK1005SR24 248.3 299.6 14 15
MLK1005SR27 290.0 386.0 14 12
MLK1005SR30 323.1 432.6 14 12
MLK1005SR33 358.9 493.1 13 12
• All specifications are subject to change without notice.
(7/7)
001-04 / 20111129 / e521_mlk
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS Q vs. FREQUENCY CHARACTERISTICS
PACKAGING STYLES
REEL DIMENSIONS
TAPE DIMENSIONS
0
1
10
100
1000
10 100 1000 10000
Inductance(nH)
Frequency(MHz)
33nH
10nH
3.3nH
100nH
1.0nH
10 100 1000 10000
0
10
20
30
40
50
Q
Frequency(MHz)
33nH
10nH
3.3nH
100nH
1.0nH
1.0
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
ø60min.
14.4max.
Dimensions in mm
8.4 +2.0
–0.0
160min. Taping 200min.
300min.
Drawing direction
Dimensions in mm
1.15±0.1
0.8max. 0.67±0.1
8.0±0.3 3.5±0.05
1.75±0.1
4.0±0.1
2.0±0.05 2.0±0.05
Sprocket hole Cavity
1.5 +0.1
–0.0
