Embedded Power for Business-Critical Continuity Rev.11.09.10_114 LDS70 Series 1 of 3 LDS70 Series LED Lighting Power Supply - Class 2 Total Power: # of Outputs: 70 Watts Single Special Features * Constant Current & Constant Voltage operation * Dimming options * Free-Air rated - No forced air necessary for cooling Compliance * Class 2 Outputs * IP64 to IP67 Water Protection * CISPR 15 / FCC Part 15 EMI Performance * Class C Harmonics * < 1.0 W No-load power * > 0.9 Power Factor Electrical Specifications Input Input range: Input frequency: Inrush current: 100 - 240 Vac (U models); 120-277 Vac (H models) 47 - 63 Hz < 50 A max., cold start @ 25 C Leakage current: 750 A, at 264 Vac 50/60 Hz Input power (no-load): < 1.0 W, at no load Input power (max): < 82 W, at full load Input fusing: Internally fused EMI/RFI: Efficiency (typical): CISPR 15 FCC Part 15 88% - 230 Vac 87% - 115 Vac Output Constant current: Programmable current levels. Refer to model table for details Constant voltage: Output power: Ripple voltage: No load to Full load operation. Refer to model table for details 70 W maximum (60 W for 12 V). Class 2 rated outputs < 2% Control and Protection Current limit: Protection: Safety * * * * 61347-2-13 EN UL 1310 / 8750 CSA C22.2 No. 107.1 CE Mark (LVD) Programmable. Refer to model table for details Short Circuit Overvoltage Overtemperature Embedded Power for Business-Critical Continuity Rev.11.09.10_114 LDS70 Series 2 of 3 Environmental Specifications Criteria Specification Reference Power Factor Harmonics > 0.9 Class C Energy Star IEC 61000-3-2 THD - Input Current < 20% Level 3 6 kV ring wave ANSI C82.11 IEC 61000-4-5 ANSI C62.41 Surge Immunity EMC Compliance IEC 61000-4-2, -3, -4, -5, -6, -8, -11 Temperature (case) -40 C to 80 C Operating Ingress Protection IP64 through IP67 Refer to model table for details Mechanical Drawing Mechanical Miscellaneous Criteria Input Wiring Output Wiring Weight Specification Reference 300 mm 3-wire 300 mm 370 grams 4-wire Embedded Power for Business-Critical Continuity Americas Ordering Information Model Number Rated Output Rated Output Voltage Current Current Adjust DIP Switch Dimming IP Rating Interface Status LDS70-12-U01 12 Vdc 5.0 Adc 2-level IP64 Coming Soon LDS70-12-H03 12 Vdc 5.0 Adc 0 - 10 V IP67 Coming Soon LDS70-58-U00 58 Vdc 1.2 Adc None IP67 Released LDS70-58-U01 58 Vdc 1.2 Adc 2-level IP64 Coming Soon LDS70-58-H03 58 Vdc 1.2 Adc 0 - 10 V IP67 Coming Soon DIP Switch 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Rev.11.09.10_114 LDS70 Series 3 of 3 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) Current Adjust and Dimming Description 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 DIP Switch For global contact, visit: Switch 1 Switch 2 -12 Model -58 Model ON ON 5.00 Adc 1.2 Adc OFF ON 3.75 Adc 0.9 Adc ON OFF 2.50 Adc 0.6 Adc OFF OFF 1.25 Adc 0.3 Adc 2 Level - External Switch between Purple & Grey Wires Switch Open Current CLOSED At Programmed Level OPEN At 20% of Rated Level 0 - 10 V Future Models Between Purple & Grey Wires www.Emerson.com/EmbeddedPower techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Output Current Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets 0 - 10V Signal Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2010 Emerson Electric Co.