CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 1 of 34 DATE 06.08.2010 Product Specification Applicant / Manufacturer Hardware Panasonic Electronic Devices Europe GmbH Zeppelinstrasse 19 21337 Luneburg Germany Applicant / Manufacturer Software Synapse Wireless Inc. SNAP Software E-Senza Technologies GmbH SN55 AT Command Set Freescale based SMAC test software for production your own written software Software Version Contents or or or Approval from customer by signature Customer By signing this document, you acknowledge that you are the legal representative for your company and that you understand and accept the validity of the contents herein. CHECKED / APPROVED: DATE: NAME: SIGNATURE: NOTE: AT LEAST ONE SET OF APPROVED SPECIFICATIONS SHOULD BE RETURNED TO THE ADDRESS OF THE ISSUING PARTY. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 2 of 34 DATE 06.08.2010 TABLE OF CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Key Features ...................................................................................................................4 Applications for the Module .............................................................................................4 Description of the Module................................................................................................5 Scope of this Document ..................................................................................................6 History for this Document ................................................................................................6 Terminal Layout...............................................................................................................7 Block diagram..................................................................................................................9 7.1. Software differences ............................................................................................10 7.1.1. Test / Demo software..............................................................................10 7.1.2. E-Senza software....................................................................................10 7.1.3. Synapse software ...................................................................................10 Key Parts List ................................................................................................................11 Test Conditions .............................................................................................................11 Absolut maximum ratings ..............................................................................................12 Operating Conditions.....................................................................................................12 DC electrical characeristics ...........................................................................................13 A/D converter Characteristics........................................................................................14 AC Electrical Characteristics .........................................................................................14 Soldering Temperature - Time Profile (for reflow soldering) .........................................16 15.1. For lead solder .....................................................................................................16 15.2. For lead free solder ..............................................................................................16 Module Dimensions.......................................................................................................17 FootPrint of the Module .................................................................................................17 Laser marking................................................................................................................18 Mechanical Requirements.............................................................................................18 Recommended Land Pattern ........................................................................................19 Reliability Tests .............................................................................................................20 Cautions ........................................................................................................................20 22.1. Design Notes........................................................................................................20 22.2. Installation Notes..................................................................................................20 22.3. Usage Conditions Notes ......................................................................................21 22.4. Storage Notes ......................................................................................................22 22.5. Safety Cautions....................................................................................................22 22.6. Other cautions......................................................................................................22 Packaging......................................................................................................................24 23.1. Tape Dimension ...................................................................................................24 23.2. Packing in Tape ...................................................................................................24 23.3. Component direction ............................................................................................25 23.4. Reel Dimension....................................................................................................25 PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L 24. 25. 26. 27. 28. 29. 30. PRODUCT SPECIFICATION PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 3 of 34 DATE 06.08.2010 23.5. Label for Package ................................................................................................26 23.6. Total Packing Handling ........................................................................................27 23.7. Cover tape reel strength.......................................................................................27 Ordering Information .....................................................................................................28 24.1. PAN4561H ...........................................................................................................28 24.2. PAN4561M...........................................................................................................29 24.3. PAN4561L............................................................................................................29 RoHS Declaration..........................................................................................................30 Data Sheet Status .........................................................................................................30 Regulatory Information ..................................................................................................30 27.1. FCC Notice...........................................................................................................30 27.2. Caution.................................................................................................................31 27.3. Labeling Requirements ........................................................................................31 27.4. Antenna Warning .................................................................................................31 27.5. Approved Antenna List.........................................................................................32 27.6. RF Exposure PAN4561........................................................................................32 Related Documents.......................................................................................................33 General Information.......................................................................................................34 Life Support Policy ........................................................................................................34 PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 4 of 34 DATE 06.08.2010 1. KEY FEATURES * * * * * * * * * * * * * * * * * * * * * Short range 2.4GHz ISM band transceiver with microcontroller and reference oscillator Provides complete hardware for a wireless node using IEEE802.15.4 packet structure Compact size (35.0mm x 15.0mm x 3.8mm) 3 antenna options: ceramic antenna onboard, ext. antenna connected to Single port 50 or antenna plug 16 selectable Channels with 250 kbps in the 2.4 GHz band Low power modes for increased battery life High sensitivity of -102 dBm typ. at 1% Packet Error Rate (PAN4561H /M) +20 dBm max. output power (PAN4561H) Programmable output power over a 30 dB range Low supply voltage (2.7V to 3.4 V, 3.0 V typ.) Operating temperature range -40C to +85C Link Quality and Clear Channel Assessment capability 60k Flash and 4k RAM memory 8 channel A/D converter with 10 Bit for fast and easy conversion from analog inputs -such as temperature, pressure and fluid levels- to digital values. 5 channel 16 Bit timer/pulse width modulation (TPM) outputs BDM port for direct download programming In total 39 digital I/O lines most with programmable pull-ups and few with high-current driver. Low power modes for increased battery life Low battery warning Low voltage detect/reset Complies to FCC Part 15 2. APPLICATIONS FOR THE MODULE * * * * * * * * Wireless sensor and actuator networks Remote control and wire replacement in industrial systems Factory and home automation and control Inventory and logistics management HID (Human Interface Devices) Toys Home gateways Proprietary networking solutions using IEEE802.15.4 PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT CUSTOMER'S CODE PAN4561H /M /L PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 5 of 34 DATE 06.08.2010 3. DESCRIPTION OF THE MODULE The PAN4561with module is a short range, low power, 2.4 GHz ISM band transceiver which includes a complete 802.15.4 physical layer (PHY) modem, designed for the IEEE 802.15.4 wireless standard and an appropriate microcontroller (MCU) with reference oscillator which provides a cost effective solution for short-range data links and networks. There are three versions of PAN4561 available, identified by an H, M or L at the end of series number i.e. PAN4561H, PAN4561M, PAN4561L. The addional letter stands for High, Mid and Low range. All modules in the PAN4561 series are based on the FreeScale MC13213 SOC, fully featured with 39 I/O lines, interchangeable and share a common footprint and software. Mixed node networks can be implemented to conserve power while maximizing range. The PAN4561L is a cost optimized module designed for standard range applications of less than 30 meters. For medium range applications the PAN4561M, is optimized to deliver longer range and conserve power consumption, using a low noise amplifier and 10dBm power amplifier. The PAN4561H is designed for extended range applications, using a low noise amplifier and 20dBm power amplifier. In this document when mentioned PAN4561 the information refers to all three module types. Data which apply only to a specific module (PAN4561 H /M /L) will be marked accordingly. Software solutions available for the PAN4561 are SNAP software from Synapse Wireless Inc. and SN55 software from E-Senza Technologies GmbH which are very easy to use. For detailed information refer to SNAP [9] and and to SN55 [8]. In addition, you are free to develop also your own application on the software package from FreescaleTM, e.g. SMAC, for details please refer to [4], [5], [6] and [7]. For the Integrated Development Environment (IDE) the MetrowerksTM CodeWarrior IDE from www.metrowerks.com is required. For device flash programming via the BDM port of PAN4561 the USB HCS08/HCS12 Multilink from www.pemicro.com is recommended. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION PRODUCT SPECIFICATION SUBJECT MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 6 of 34 DATE 06.08.2010 4. SCOPE OF THIS DOCUMENT This product specification applies to the IEEE 802.15.4 Standard modem ENWC9A22xxEF. The xx is the indicator for different versions (refer to chapter 25 Ordering Information). The platform used is the MC13213 from the US company Freescale Semiconductor www.freescale.com/ [2], [3] 5. HISTORY FOR THIS DOCUMENT Revision Date Modification / Remarks A 09.03.2009 Initial draft version B 20.03.2009 Some minor changes, regarding the specification wording C 29.04.2009 Change chapter 24, ordering code for Synapse software. Change the crystal value from 26MHz to 16MHz in chapter block diagram, as it was a mistake in this document. D 08.09.2009 Change chapter 7, regarding hardware dependent software. E 06.04.2010 Datasheet updated for 4561 PCB revision C (Prelimenary) F 31.05.2010 Added chapter 27 Regulatory Information. Minor changes of module parameters. G 06.08.2010 Added data for PAN4561M and PAN4561L PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 7 of 34 DATE 06.08.2010 6. TERMINAL LAYOUT Please refer also to the MC1321x technical data sheet and reference manual, which is given in [2] and [3] in the chapter "Related Documents". Pin No. Pin Pin Type Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 GND PTD4 / TPM2CH1 PTD5 / TPM2CH2 PTD6 / TPM2CH3 PTD7 / TPM2CH4 PTD2 / TPM1CH2 NC PTC0 / TXD2 PTC1 / RXD2 PTC2 / SDA1 PTC3 / SCL1 PTB0 / AD1P0 PTB1 / AD1P1 PTB2 / AD1P2 PTB3 / AD1P3 PTB4 / AD1P4 PTB5 / AD1P5 PTB6 / AD1P6 PTB7 / AD1P7 VREFH VREFL GND Vcc Vcc PTG1 / XTAL I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Ground MCU Port D Bit 4 / TPM2 Channel 1 MCU Port D Bit 5 / TPM2 Channel 2 MCU Port D Bit 6 / TPM2 Channel 3 MCU Port D Bit 7 / TPM2 Channel 4 MCU Port D Bit 2 / TPM1 Channel 2 Not connected - leave open MCU Port C Bit 0 / SCI2 TX data out (UART2) MCU Port C Bit 1 / SCI2 RX data in (UART2) MCU Port C Bit 1/ IIC bus data (IC) MCU Port C Bit 1/ IIC bus clock (IC) MCU Port B Bit 0 / ATD analog Channel 0 MCU Port B Bit 1 / ATD analog Channel 1 MCU Port B Bit 2 / ATD analog Channel 2 MCU Port B Bit 3 / ATD analog Channel 3 MCU Port B Bit 4 / ATD analog Channel 4 MCU Port B Bit 5 / ATD analog Channel 5 MCU Port B Bit 6 / ATD analog Channel 6 MCU Port B Bit 7 / ATD analog Channel 7 MCU high reference voltage for ATD MCU low reference voltage for ATD Ground Modem voltage regulators' input Modem voltage regulators' input MCU Port G Bit 1 / Crystal oscillator output (2) Dig. I/O Dig. I/O Dig. I/O Dig. I/O I/O I/O I/O I/O I/O I/O I/O I/O I I I/O Power I Power I Dig. I/O / O PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 8 of 34 DATE 06.08.2010 Pin No. Pin Pin Type Description 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 - 54 55 56 - 62 PTG2 / EXTAL RESET CLKO GPIO2 PTG0 / BKGND / MS GPIO1 GND VDDA PTA7 / KBI1P7 PTA6 / KBI1P6 PTA5 / KBI1P5 PTA4 / KBI1P4 PTA3 / KBI1P3 PTA2 / KBI1P2 PTA1 / KBI1P1 PTA0 / KBI1P0 PTC7 / GPIO PTC6 / GPIO PTC5 / GPIO PTC4 / GPIO PTE0 / TXD1 PTE1 / RXD1 GPIO5 GPIO6 GPIO7 NC NC GND EXANT GND Dig. I/O / I Dig. I Dig. O Dig. I/O Dig. I/O Dig. I/O I/O Power O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O Dig. I/O MCU Port G Bit 2 / Crystal oscillator input (2) (3).(4) MCU reset. Active low Programmable Clock Output (default: 32,768 kHz) (3) GPIO2 from RF transceiver unit MCU Port G Bit 0 / Background / Mode Select (1) GPIO1 from RF transceiver unit Ground Modem analog regulated supply output - leave open MCU Port A Bit 7 / Keyboard Input Bit 7 MCU Port A Bit 6 / Keyboard Input Bit 6 MCU Port A Bit 5 / Keyboard Input Bit 5 MCU Port A Bit 4 / Keyboard Input Bit 4 MCU Port A Bit 3 / Keyboard Input Bit 3 MCU Port A Bit 2 / Keyboard Input Bit 2 MCU Port A Bit 1 / Keyboard Input Bit 1 MCU Port A Bit 0 / Keyboard Input Bit 0 MCU Port C Bit 7 (GPIO) MCU Port C Bit 6 (GPIO) MCU Port C Bit 5 (GPIO) MCU Port C Bit 4 (GPIO) MCU Port E Bit 0 / SCI1 TX data out (UART1) MCU Port E Bit 1/ SCI1 RX data in (UART1) GPIO5 from RF transceiver unit GPIO6 from RF transceiver unit GPIO7 from RF transceiver unit Not connected - leave open Not connected - leave open Ground Pin for external antenna (50 ) Ground I/O I/O I/O Note: (1) PTG0 is output only. Pin is I/O when used as BDM function. (2) Full I/O when not used as clock source. Please refer also to [2]. (3) CLKO (Pin 28) and PTG2/EXTAL (Pin 26) must be connected when the programmable clock derived from the internal 16 MHz crystal. Do not connect when the clock derived from Internal Reference Generator in MC13213. (4) PTG2 / EXTAL is not accessible with E-Senza software Port PTA, PTB, PTC, PTD, PTE, PTG have internal software controlled pull-up resistors. For detailed information refer to [3]. All I/O pins of port PTC are high current pins. The maximum current for all pins together must not exceed 60mA. A continuous current of 7mA, and 25mA burst for each port pin must not be exceeded. For detailed information refer to [3]. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 9 of 34 DATE 06.08.2010 7. BLOCK DIAGRAM HGM PAEN EN RXTX PAN4561H / PAN4561M The RF frontend IC CC2591 / CC2590 is controlled with GPIO3, GPIO4 and CT_Bias from RF transceiver unit (see above block diagram). PAN4561L The MC13213 is used in single port configuration with its internal Tx/Rx switch. For more details refer to chapter 7.1. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 10 of 34 DATE 06.08.2010 7.1. SOFTWARE DIFFERENCES 7.1.1. Test / Demo software Modules with Test / Demo software are intended for customer writing their own software for the module. The module contains software but only with a small instruction set. The front end IC CC2591 / CC2590 is enabled and disabled with RF transceiver GPIO4. Set high to enable and low to disable the chip. Please refer to appendix [10]. The LNA has two modes, high and low gain. This mode is controlled with RF transceiver GPIO3. Set it high for high gain and low for low gain mode. Please refer to appendix [10]. The RXTX signal on CC2591 and CC2590 is controlled by CT_Bias pin. Please refer to appendix [10]. 7.1.2. E-Senza software Modules with E-Senza software can be used to set up a measurement system easily with a GUI. With this software it is not possible to set the modules into energy saving sleep mode. 7.1.3. Synapse software With Synapse software the customer writes his own scripts based on easy to learn, Phyton based, programming language. This software is very flexible and can be used for multiple applications. The control of PA/LNA is primary supported from version SNAPv2.2.15 or newer. The Synapse software on the module provides several initializing parameters called NVparameters. These are already set. For detailed information refer to SNAP Reference Manual [9]. To comply to FCC regulation the power level has to be reduced to txPwr(14) for PAN4561H. For detailed information on FCC compliance refer to chapter 27. Regulatory Information. Synapse Wireless Inc. probably releases two to three times a year a new SNAP release. PAN4561 modules will always be shipped with the newest SNAP version. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 11 of 34 DATE 06.08.2010 8. KEY PARTS LIST Part Name Material P.W.Board Casing Glass cloth epoxide resin with gold plating Material: BZn15-20, thickness 0.15mm MC13213 (Freescale www.freescale.com/) All information are based on [2] chapter 28 CC2591 / CC2590 (Texas Instruments www.ti.com) All information are based on [10] chapter 27. IC part name 9. TEST CONDITIONS Measurements are made under room temperature and humidity unless otherwise specified. Temperature 25 10C Supply voltage 3.0V Humidity 40 to 85%RH PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION No. REV. DS-4561-2400-102 G PAGE 12 of 34 DATE 06.08.2010 MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. 10. ABSOLUT MAXIMUM RATINGS The maximum ratings may not be exceeded under any circumstances (not even momentarily) as permanent damage to the module will result. No. Item Symbol Absolute Maximum Ratings Unit 1 Supply voltage VCC -0.3 to +3.6 Vdc (2) 2 Ripple on VCC Vccrip tbd (ripple frequency 200kHz) mVpp 3 Digital input voltages Vin -0.3 to VCC+0.3 Vdc 4 Instantaneous maximum current Single pin limit for all digital I/O pins (1) IBDB 25 mAdc 5 Storage temperature range Tstg -40 to +105 C 6 Operating temperature range Top -40 to +85 C 7 RF Input Power Pmax 10 dBm 8 ESD on any pin except for pin 32 EXANT. Human Body Model (HBM) VTHHBM 2 kV 9 Moisture Sensitivity Level MSL 3 (168 hours) Notes: (1) Input must be current limited to the value specified. Please refer also to [2]. (2) The supply voltage must be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, please provide a decoupling circuit (for example a ferrite in series connection and a blocking capacitor to ground of at least 47F directly at the module). The exact ripple tolerance will be published in a later revision. 11. OPERATING CONDITIONS No. Item 1 Supply voltage 2 RF Input Frequency 3 Return loss of load at pin 55 EXANT 4 Logic Input Voltage Low 5 Logic Input Voltage High 6 SPI clock rate 7 Operating temperature range Condition / Remark The typical value is recommended Receive/Transmit Mode to 50 reference load The typical value is recommended PANASONIC ELECTRONIC DEVICES EUROPE GMBH Symbol Value Min Typ Max Unit VCC 2.7 3.0 3.4 Vdc fin 2400 2483.5 MHz a -9.5 VIL 0 0.3xVCC V VIH 0.7xVCC VCC V fSPI - 8.0 MHz Top -40 +85 C dB - www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 13 of 34 DATE 06.08.2010 12. DC ELECTRICAL CHARACERISTICS Assume VCC = 3.0V, Tamb = 25C if nothing else stated No. Item Condition / Remark Symbol 1 Transmit current consumption Transmit Mode ICCT 2 Receive current consumption (8) Receive Mode (8) ICCR Off(2)(4)(4) Ileakage Sleep(2)(5)(9) ICCH Standby(2)(3)(6)(9) ICCD Idle(7)(7) ICCI 3 4 6 Low power current consumption (8) digital I/O pin characteristics Low voltage warning/detection Power on reset re-arm voltage Module type Value Min Typ Unit Max PAN4561H @ 20dBm(1) `200 240 mA PAN4561M @ 10dBm `72 80 PAN4561L @ 0dBm `43 50 PAN4561H `48 60 PAN4561M `47 60 mA PAN4561L `45 60 PAN4561H `0.55 `PAN4561M `0.55 `A PAN4561L `0.55 `PAN4561H `2.2 `PAN4561M `2.2 `A PAN4561L `2.2 `PAN4561H `36,3 `PAN4561M `36,3 `A PAN4561L `36,3 `PAN4561H `1.6 `PAN4561M `1.6 `mA PAN4561L `1.6 `Please refer to [2] 6.3.1 MCU DC Characteristics Please refer to [2] 6.3.1 MCU DC Characteristics Notes: (1) SPI Register 12 has a value of 0xDC which sets output power to nominal value. (2) To attain specified low power current, all GPIOs and other digital IO must be handled properly. Set all port pins as output low when left open or as input when connected to defined level. Detailed descriptions can be found at [2] at section 7.2 Low Power Considerations. (3) CLKO frequency is set to a default value of 32.786 kHz. (4) Off mode: Stop1 on C, Modem off [3]. Wakeup by IRQ or Reset (5) Sleep mode: Stop2 + RTC on C, Modem Hibernate [3]. Wakeup by IRQ, Reset or Real-TimeInterrupt (6) Standby mode: Stop3 + RTC on C, Modem Doze [3]. Wakeup by IRQ, Reset, RTI or Keyboard Interrupt (7) Idle mode: C runs at reduced 2 MHz clock, Modem is in Idle state [3] (8) C runs in full speed mode (16 MHz clock) (9) RTC requires external 32 kHz crystal. Without RTC 300nA less current PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 14 of 34 DATE 06.08.2010 13. A/D CONVERTER CHARACTERISTICS No Item Remark 1 ATD characteristics Please refer to [2] 6.3.3 MCU ATD Characteristics 2 ATD timing/performance characteristics Please refer to [2] 6.3.3 MCU ATD Characteristics The A/D high reference voltage VREFH is connected to pin 20 (VREFH). Connect this signal primarily to Vcc. The A/D low reference voltage VREFL is connected to pin 21 (VREFL). Connect this signal primarily to GND 14. AC ELECTRICAL CHARACTERISTICS VCC = 3.0V, Tamb = 25C, 50 load at EXANT, for all channel numbers 11,12,..., 26 according to [1] No 1 2 3 4 5 6 8 9 Receiver Sensitivity for 1% Packet Error Rate (PER), -85dBm required by [1] Saturation (maximum input level) Adjacent Channel Interference for 1% PER (5MHz; desired signal -82dBm) Alternate Channel Interference for 1% PER (10MHz; desired signal -82dBm) Frequency Error Tolerance Symbol Rate Error Tolerance Spurious Emissions <1GHz Spurious Emissions >1GHz Module type Limit Min Unit Typ Max PAN4561H -85 -102 -105 PAN4561M PAN4561L All -85 -85 - -102 -92 10 -105 - All - 29 - dB All - 40 - dB All All All All - - 200 80 -57 -47 PANASONIC ELECTRONIC DEVICES EUROPE GMBH - dBm dBm kHz ppm dBm dBm www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No Transmitter Module type Limit Min No. REV. DS-4561-2400-102 G PAGE 15 of 34 DATE 06.08.2010 Unit Typ Max (3) 20 22(3) PAN4561H - PAN4561M PAN4561L - 10 0 PAN4561H - 18.5 - PAN4561M PAN4561L - 9.5 0 25 30 250 35 - 1 Maximum Output Power (1) 2 Nominal Output Power (2) 3 4 5 Error Vector Magnitude (EVM) Power Control Range Over the Air Data Rate 6 2nd harmonic @ maximum output power - -45 -35 dBm 7 3rd harmonic @ maximum output power - -45 -35 dBm 8 9 Spurious Emissions <1GHz Spurious Emissions >1GHz - < -40 < -40 -36 -30 dBm dBm No Stand By 1 2 Spurious Emissions <1GHz Spurious Emissions >1GHz Limit Min - - dBm dBm % dB kbps Unit Typ < -60 < -50 Max -57 -47 dBm dBm Notes: (1) SPI Register 12 programmed to 0xFF which sets output power to maximum. Measured at pin EXANT for the SMD pad version. (2) SPI Register 12 programmed to 0xDC which sets output power to nominal value (maximum allowed value to comply with FCC regulation). Measured at pin EXANT for the SMD pad version. (3) You have to follow your own national regulation, please check before finalizing the max. output power by setting the right register value. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION PRODUCT SPECIFICATION SUBJECT MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 16 of 34 DATE 06.08.2010 15. SOLDERING TEMPERATURE - TIME PROFILE (FOR REFLOW SOLDERING) 15.1. FOR LEAD SOLDER 10 1s Recommended temp. profile for reflow soldering 30 +20/-10s 235C max. Temp.[C] 220 5C 200C 150 10C 90 30s Time [s] 15.2. FOR LEAD FREE SOLDER Our used temp. profile for reflow soldering Temp.[C] 30 +20/-10s 230C -250C max. 220C 150C - 190C 90 30s Time [s] Reflow permissible cycles: 2 Opposite side reflow is prohibited due to the module weight. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 17 of 34 DATE 06.08.2010 16. MODULE DIMENSIONS No. Item Dimension Tolerance 1 Width 15.00 0.25 2 Lenght 35.00 0.25 3 Height 3.80 0.25 Remark With case 17. FOOTPRINT OF THE MODULE All dimensions are in millimeters. The outer dimensions have a tolerance of 0.25mm. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 18 of 34 DATE 06.08.2010 18. LASER MARKING The 2D-Barcode contains the following information separated by a semicolon: Value Description Date-code Date code in the format Year-Month-Day [YYMMDD] Serial-No. Serial number [7 signs, here 0000000] ENWC9A2xxxEF Ordering number [8 signs; without ENW and F, please refer also to chapter 24] v Module type: H, M or L (for High, Mid and Low power) yy The identifier for the hardware release [2 signs, here yy] zz The identifier for the software release [2 signs, here zz] The point on the marking (below left) is the identifier for pin 1 of the module. 19. MECHANICAL REQUIREMENTS No. Item Limit Condition 1 Solderability More than 75% of the soldering area shall be coated by solder Reflow soldering with recommendable temperature profile PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 19 of 34 DATE 06.08.2010 20. RECOMMENDED LAND PATTERN 35.0 mm 53 32 Pad 1 = 4 x 1.40mm x 1.40mm 15.0 mm 14.6 Antenna Pad 2 = 58 x 0.70mm x 1.40mm In comparison to the module, we recommend to use 50m bigger pad size to each direction! 1 min. 5.0 When using the ceramic antenna, this minimum area is restricted, means no ground, no line and in general no metal, e.g. screws min. 5.0 22 28.35 Dimensions in millimeters. The land pattern dimensions above are meant to serve only as a guid. This information is provided without any legal liability. For the footprint, it is recommended to incorporate a 50m bigger size for the pads in each direction compared to the module footprint. Please refer to chapter 17. Foot Print of the Module. For the solder paste screen, please use the same screen for the module. Solder paste screen cutouts (with slightly different dimensions) might be optimum depending on your soldering process For example, the chosen solder paste screen thickness might havean effect. The solder screen thickness depends on your production standard. We recommend 120m to 150m. IMPORTANT: Although the bottom side of PAN4561 is fully coated, no copper such as through hole vias, planes or tracks on the board component layer should be located below the PAN4561 to avoid creating a short. In cases where a track or through hole via has to be located under the module, please make a note that it has to be kept away from PAN4561 bottom pads. The PAN4561 multilayer pcb contains an inner RF shielding plane, therefore no pcb shielding plane below the module is needed. When using the antenna pad version, place the antenna on the edge of your carrier board (if allowable). If you have any questions on these points, please contact your local Panasonic representative. Before releasing the layout, we recommend to sent the schematic and layout for final check to wireless@eu.panasonic.com. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 20 of 34 DATE 06.08.2010 21. RELIABILITY TESTS The measurement should be done after being exposed to room temperature and humidity for 1 hour. Die Messungen sollten erst nach einer Stunde Lagerung unter normalen Bedingungen erfolgen. No. Item Limit 1 Vibration test Electrical parameter should be in specification 2 Shock test the same as above 3 Heat cycle test the same as above 4 5 6 Moisture test Low temp. test High temp. test the same as above the same as above the same as above Condition a) Freq.:10~50Hz,Amplitude:1.5mm a) 20min. / cycle,1hrs. each of XYZ axis b) Freq.:30~100Hz, 6G b) 20min. / cycle,1hrs. each of XYZ axis Dropped onto hard wood from height of 50cm for 3 times -40C for 30min. and +85C for 30min.; each temperature 300 cycles +60C, 90% RH, 300h -40C, 300h +85C, 300h 22. CAUTIONS Failure to do so may result in degrading of the product's functions and damage to the product. 22.1. DESIGN NOTES (1) (2) (3) (4) (5) (6) 22.2. Please follow the conditions written in this specification, especially the control signals of this module. The supply voltage has to be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a blocking capacitor to ground of at least 47uF directly at the module). This product should not be mechanically stressed when installed. Heat is the major cause of shortening the life of these products. Please keep this product away from heat. Avoid assembly and use of the target equipment in conditions where the products' temperature may exceed the maximum tolerance. The supply voltage should not be exceedingly high or reversed. It should not carry noise and/or spikes. Please keep this product away from other high frequency circuits. INSTALLATION NOTES (1) (2) (3) Reflow soldering is possible twice based on the conditions in chapter 15. Please set up the temperature at the soldering portion of this product according to this reflow profile. Carefully position the products so that their heat will not burn into printed circuit boards or affect the other components that are susceptible to heat. Carefully locate these products so that their temperatures will not increase due to the effects of heat generated by neighboring components. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L (4) (5) (6) (7) (8) (9) 22.3. PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 21 of 34 DATE 06.08.2010 If a vinyl-covered wire comes into contact with the products, then the cover will melt and generate toxic gas, damaging the insulation. Never allow contact between the cover and these products to occur. This product should not be mechanically stressed or vibrated when reflowed. If you want to repair your board by hand soldering, please keep the conditions of this chapter. Please do not wash this product. Please refer to the recommended pattern when designing a board. Pressing on parts of the metal cover or fastening objects to the metal will cause damage to the unit. USAGE CONDITIONS NOTES (1) (2) (3) (4) (5) (6) (7) Please take measures to protect the unit against static electricity. If pulses or other transient loads (a large load applied in a short time) are applied to the products, check and evaluate their operation befor assembly on the final products. Please do not use dropped products. Please do not touch, damage or place dirt on the pins. Please follow the recommended condition ratings about the power supply applied to this product. Electrode peeling strength: Do not add pressure of more than 4.9N when soldered on PCB. Pressing on parts of the metal cover or fastening objects to the metal cover will cause damage. These products are intended for general purpose and standard use in general electronic equipment, such as home appliances, office equipment, information and communication equipment. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L 22.4. PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 22 of 34 DATE 06.08.2010 STORAGE NOTES (1) (2) (3) (4) (5) (6) 22.5. The module may not be stressed mechanically during storage. Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected: * Storage in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX * Storage in direct sunlight * Storage in an environment where the temperature may be outside the range of 5C to 35C range, or where the humidity may be outside the 45 to 85% range. * Storage of the products for more than one year after the date of delivery at your company if the avoidance all the above conditions (1) to (3) have been met. Storage period: Please check the adhesive strength of the embossed tape and soldering after 6 months of storage. Please keep this product away from water, poisonous gas and corrosive gas. This product should not be stressed or shocked when transported. Please follow the specification when stacking packed crates (max. 10). SAFETY CAUTIONS These specifications are intended to preserve the quality assurance of products and individual components. Before use, check and evaluate the operation when mounted on your products. Abide by these specifications, without deviation when using the products. These products may shortcircuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated when a short circuit occurs, then provide the following failsafe functions, as a minimum. (1) Ensure the safety of the whole system by installing a protection circuit and a protection device. (2) Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a single fault causing an unsafe status. 22.6. OTHER CAUTIONS (1) (2) (3) (4) (5) This specification sheet is copyrighted. Please do not disclose it to a third party. Please do not use the products for other purposes than those listed. Be sure to provide an appropriate fail-safe function on your product to prevent an additional damage that may be caused by the abnormal function or the failure of the product. This product has not been manufactured with any ozone chemical controlled under the Montreal Protocol. These products are not intended for other uses, other than under the special conditions shown below. Before using these products under such special conditions, check their performance and reliability under the said special conditions carefully to determine whether or not they can be used in such a manner. * In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L (6) (7) PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 23 of 34 DATE 06.08.2010 where liquid may splash. * In direct sunlight, outdoors, or in a dusty environment * In an environment where condensation occurs. * In an environment with a high concentration of harmful gas (e.g. salty air, HCl, Cl2, SO2, H2S, NH3, and NOX) If an abnormal voltage is applied due to a problem occurring in other components or circuits, replace these products with new products because they may not be able to provide normal performance even if their electronic characteristics and appearances appear satisfactory. When you have any question or uncertainty, both of you and Panasonic sincerely cope with it. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 24 of 34 DATE 06.08.2010 23. PACKAGING 23.1. TAPE DIMENSION 23.2. PACKING IN TAPE Empty spaces in component packed area shall be less than two per reel and those spaces shall not be consecutive. Top cover tape shall not be found on reel holes and shall not stick out from reel. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L 23.3. PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 25 of 34 DATE 06.08.2010 COMPONENT DIRECTION Please refer also to chapter 18. Labeling Drawing 23.4. REEL DIMENSION TAPE SIZE A MAX B MIN 24mm 330.0 1.5 C 13 +0.5 -0.2 D MIN 1.0 N 20.2 100.0 All dimensions in millimeters unless otherwise stated PANASONIC ELECTRONIC DEVICES EUROPE GMBH W1 25.0 +2.0 -0.0 W2 MAX 30.4 W3 24.4 +3.0 -0.5 Assembly Method *Latch *Latch (2PC) www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L 23.5. PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 26 of 34 DATE 06.08.2010 LABEL FOR PACKAGE The label below shows only an example. (3P):PAN4561v Customer Code (1T): (1P) (2P) (3P) (9D) (Q) (HW/SW) [[G]] ENWC9A22xxEF Lotcode [YYWWDLL] YY year today 10 WW normal calendar week today 01 D day today 5 (Friday) L line identifier, if more as one actual 1 L lot identifier per day e.g. 1, 2, 3... Customer Order Code, if any, otherwise put company name on it. Panasonic Part Number Module type [PAN4561H, PAN4561M or PAN4561L] Datecode as [2xYear, 2xMonth, 2xDay] Quantity [XXXX], variable Hardware /Software Release identifier Identifier that the product is RoHS conform, please refer to chapter 25. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. 23.6. TOTAL PACKING HANDLING 23.7. COVER TAPE REEL STRENGTH No. REV. DS-4561-2400-102 G PAGE 27 of 34 DATE 06.08.2010 Force direction = 10deg Speed = 300mm/min. Cover tape reel strength =0.098~0.68N (10~70g) PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 28 of 34 DATE 06.08.2010 24. ORDERING INFORMATION 24.1. No. PAN4561H Ordering part number Description Engineering Sample PAN4561H 802.15.4 Mesh Network Module, which includes Ceramic Antenna, Low Noise Amplifier, up to +20dBm Power Amplifier and 60kBit Flash Memory. Synapse SNAP software included, please refer also to [9]. Engineering Sample PAN4561H 802.15.4 Mesh Network Module, which includes UFL connector, Low Noise Amplifier, up to +20dBm Power Amplifier and 60kBit Flash Memory. Synapse SNAP software included, please refer also to [9]. Engineering Sample PAN4561H 802.15.4 Mesh Network Module, which includes RF out on SMD pad, Low Noise Amplifier, up to +20dBm Power Amplifier and 60kBit Flash Memory. Synapse SNAP software included, please refer also to [9]. Same as number 1, but with Software: SN55 from E-Senza, please refer also to [8] Same as number 2, but with Software: SN55 from E-Senza, please refer also to [8] Same as number 3, but with Software: SN55 from E-Senza, please refer also to [8] 1 ENWC9A22A4EF 2 ENWC9A22B4EF 3 ENWC9A22C4EF 4 ENWC9A22A2EF 5 ENWC9A22B2EF 6 ENWC9A22C2EF 7 ENWC9A22A1EF Same as number 1, but with Freescale based SMAC test software. 8 ENWC9A22B1EF Same as number 2, but with Freescale based SMAC test software. 9 ENWC9A22C1EF Same as number 3, but with Freescale based SMAC test software. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L 24.2. No. PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 29 of 34 DATE 06.08.2010 PAN4561M Ordering part number Description Engineering Sample PAN4561M 802.15.4 Mesh Network Module, which includes Ceramic Antenna, Low Noise Amplifier, up to +10dBm Power Amplifier and 60kBit Flash Memory. Synapse SNAP software included, please refer also to [9]. Engineering Sample PAN4561M 802.15.4 Mesh Network Module, which includes UFL connector, Low Noise Amplifier, up to +10dBm Power Amplifier and 60kBit Flash Memory. Synapse SNAP software included, please refer also to [9]. Engineering Sample PAN4561M 802.15.4 Mesh Network Module, which includes RF out on SMD pad, Low Noise Amplifier, up to +10dBm Power Amplifier and 60kBit Flash Memory. Synapse SNAP software included, please refer also to [9]. Same as number 1, but with Software: SN55 from E-Senza, please refer also to [8] Same as number 2, but with Software: SN55 from E-Senza, please refer also to [8] Same as number 3, but with Software: SN55 from E-Senza, please refer also to [8] 1 ENWC9A25A4EF 2 ENWC9A25B4EF 3 ENWC9A25C4EF 4 ENWC9A25A2EF 5 ENWC9A25B2EF 6 ENWC9A25C2EF 7 ENWC9A25A1EF Same as number 1, but with Freescale based SMAC test software. 8 ENWC9A25B1EF Same as number 2, but with Freescale based SMAC test software. 9 ENWC9A25C1EF Same as number 3, but with Freescale based SMAC test software. 24.3. PAN4561L No. Ordering part number Description Engineering Sample PAN4561L 802.15.4 Mesh Network Module, which includes Ceramic Antenna, up to 0dBm output power and 60kBit Flash Memory. Synapse SNAP software included, please refer also to [9]. Engineering Sample PAN4561L 802.15.4 Mesh Network Module, which includes UFL connector, up to 0dBm output power and 60kBit Flash Memory. Synapse SNAP software included, please refer also to [9]. Engineering Sample PAN4561L 802.15.4 Mesh Network Module, which includes RF out on SMD pad, up to 0dBm output power and 60kBit Flash Memory. Synapse SNAP software included, please refer also to [9]. Same as number 1, but with Software: SN55 from E-Senza, please refer also to [8] Same as number 2, but with Software: SN55 from E-Senza, please refer also to [8] Same as number 3, but with Software: SN55 from E-Senza, please refer also to [8] 1 ENWC9A21A4EF 2 ENWC9A21B4EF 3 ENWC9A21C4EF 4 ENWC9A21A2EF 5 ENWC9A21B2EF 6 ENWC9A21C2EF 7 ENWC9A21A1EF Same as number 1, but with Freescale based SMAC test software. 8 ENWC9A21B1EF Same as number 2, but with Freescale based SMAC test software. 9 ENWC9A21C1EF Same as number 3, but with Freescale based SMAC test software. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 30 of 34 DATE 06.08.2010 25. ROHS DECLARATION Declaration of environmental compatibility for supplied products: Hereby we declare to our best present knowledge based on declaration of our suppliers that this product does not contain the following substances which are banned by Directive 2002/95/EC (RoHS) or contains a maximum concentration of 0.1% by weight in homogeneous materials for * * * * * Lead and lead compounds Mercury and mercury compounds Chromium (VI) PBB (polybrominated biphenyl) category PBDE (polybrominated biphenyl ether) category And a maximum concentration of 0.01% by weight in homogeneous materials for * Cadmium and cadmium compounds 26. DATA SHEET STATUS This data sheet contains data from the PRELIMINARY specification. Supplementary data will be published at a later date. Panasonic Electronic Devices Europe GmbH reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Please consult the most recently issued data sheet before initiating or completing a design. If there is an update, please download under: PAN4561 Latest Data Sheet! 27. REGULATORY INFORMATION 27.1. FCC NOTICE The device PAN4561, including the ceramic antenna (ENWC9A2xAxEF) and also the SMD type (ENWC9A2xCxEF), including with the antennas, which are listed in 27.5, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407.transmitter under following restrictions: PAN4561H 1) Channel 26, according to [1] IEEE 802.15.4, must not be used 2) Maximum output power of 18.5dBm allowed. This level refers to the value 0xDC in SPI register 12 of MC13213 (refer to [2] and [3]). 3) Duty cycle of 1% allowed PAN4561M 1) Channel 26, according to [1] IEEE 802.15.4, must not be used PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 31 of 34 DATE 06.08.2010 PAN4561L No restrictions Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 27.2. CAUTION The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Electronic Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/TV technician for help 27.3. LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. This includes a clearly visible label (laser marking) on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier is FCC ID: T7V4561HM. In any case end product must be labelled exterior with "Contains FCC ID: T7V4561HM" 27.4. ANTENNA WARNING The related part number for this device is ENWC9A2xBxEF (PAN4561 with U.FL connector) and ENWC9A2xCxEF (PAN4561 with SMD pad). For details, please see the chapter 24. Ordering Information. This device is tested with a standard SMA connector and with the antennas listed below. When integrated in the OEMs product, these fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for emissions. The FCC identifier for this device with the antenna listed in item 1 are the same (FCC ID: T7V4561HM). PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 32 of 34 DATE 06.08.2010 27.5. APPROVED ANTENNA LIST Note: We are able to qualify your antenna and will add to this list as that process is completed. Item Part Number Manufacturer Frequency Band Type Gain (dBi) 1 2 27.6. RF EXPOSURE PAN4561 To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer (OEM) must ensure that the approved antenna in the previous table must be installed. The preceding statement must be included as a CAUTION statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. The radiated output power of PAN4561 with mounted ceramic antenna (FCC ID: T7V4561HM) is below the FCC radio frequency exposure limits. Nevertheless, the PAN4561 shall be used in such a manner that the potential for human contact during normal operation is minimized. End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 33 of 34 DATE 06.08.2010 28. RELATED DOCUMENTS For an update, please search in the suitable homepage. [1] IEEE Standard 802.15.4 -2003 Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (LR-WPANs) [2] Technical Data MC1321x Document Number: MC1321x Rev. 1.1, 03/2007 Freescale Semiconductor [3] MC1321x Reference Manual Document Number: MC1321xRM Rev. 1.1, 10/2006 Freescale Semiconductor [4] Handling MAC Address erasure, AN2825, Rev. 0.0 10/2004, Freescale Semiconductor [5] 802154MPSUG 802.15.4 MAC/PHY Software Users Guide, Rev 1.1, Freescale Semiconductor [6] 802154EBRM.pdf 802.15.4 Embedded Bootloader Reference Manual Rev. 0.0 09/2004 [7] AN2771 802.15.4 PHY Protocol Test Client (PTC) Rev. 0.0 Freescale Semiconductor [8] Manual to the E-Senza SN55 Programmer Interface Manual [Download] [9] Manual to the Evaluation Kit from Synapse, which fits to module hardware from Panasonic [Downloads: SNAP Reference Manual Updated 10/2/2008; SNAP Hardware Technical Manual Updated 10/2/2008] Each new release from Synapse, will be posted here. Be sure to be registered free under http://forums.synapse-wireless.com. [10] Technical Data CC2591 (2.4-GHz RF Front End) from Texas Instruments CC2591 2.4 GHz RF Front End (Rev. A; 10. Juni 2008) [11] Question and Answer Sheet for CC2590 and CC2591 CC2590 and CC2591 Q&A Sheet (Rev. D; 26. January 2010) PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION MODEM FOR 802.15.4 IEEE STANDARD CUSTOMER'S CODE PAN4561H /M /L PANASONIC PART NUMBER ENWC9A22xxEF / .25xx. / .21xx. No. REV. DS-4561-2400-102 G PAGE 34 of 34 DATE 06.08.2010 29. GENERAL INFORMATION (c) Panasonic Electronic Devices Europe GmbH 2009. All rights reserved. This product description does not claim to be complete and free of mistakes. Please contact the related product manager with any errata inquries. If we deliver samples to the customer, these samples have the status Engineering Samples. This means, the design of this product is not yet completed. Engineering Samples may be partially or fully functional, and there may be differences published in the Data Sheet. Engineering Samples are not qualified and are not to be used for reliability testing or series production. Disclaimer: Customer acknowledges that samples may deviate from the Data Sheet and may bear defects due to their status of development and the lack of qualification mentioned above. Panasonic Electronic Devices Europe GmbH disclaims any liability or product warranty for Engineering Samples. In particular, Panasonic Electronic Devices Europe GmbH disclaims liability for damages caused by * the use of the Engineering Sample other than for Evaluation Purposes, particularly the installation or integration in an other product to be sold by Customer, * deviation or lapse in function of Engineering Sample, * improper use of Engineering Samples. Panasonic Electronic Devices Europe GmbH disclaimes any liability for consequential and incidental damages. In case of any questions, please contact your local sales partner or the related product manager. 30. LIFE SUPPORT POLICY This Panasonic Electronic Devices Europe GmbH product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic Electronic Devices Europe GmbH for any damages resulting. PANASONIC ELECTRONIC DEVICES EUROPE GMBH www.pedeu.pansonic.de