Page 1 of 2 LTM Standard Outdoor Cables LTM Standard Outdoor Cables are based on the industry standard design known best for protection against moisture and temperature fluctuations. These cables are used for interbuilding installations in ducts or conduits or are lashed aerially. Loose tube cables are designed to withstand adverse environments and provide very low attenuation. They are cost effective, long-term solutions for many outdoor applications. Features and Benefits Loose tube, gel-filled construction UV and moisture resistant design Extremely low attenuation Color coded fibers and tubes for easy identification Available with up to 216 fibers Applications * Interbuilding backbone * Requirements for high fiber counts * Most duct, conduit and lashed applications ORDERING INFORMATION Fiber Optic Center, Inc., 23 Centre Street, New Bedford, MA, 02740-6322, USA Website: www.focenter.com e-mail: sales@focenter.com, Toll Free: (800) IS-FIBER, (800) 473-4237, Tel: (508) 992-6464, Fax: (508) 991-8876 Page 2 of 2 GENERAL SPECIFICATIONS Temperature: -40C (-40F) to 80C (176F) Storage; -40C (-40F) to 80C (176F) In-Servi ce C entral Strength Member: Epoxy/glass rod C able C ore: Gel-Fi lled Loose Tubes Outer Strength Member: Arami d fi ber yarn Jacket: Black UV and moi sture resi stant polyethylene Maxi mum Tensi le Load: Installati on 600 Lbsf (2670 N); In-Servi ce 135 Lbsf (600 N) Maxi mum C hrush Resi stance: 500 Lbsf/i n (875 N/cm) ORDERING INFORMATION Cable Part Numbering System 1 2 3 4 5 6 7 8 9 Jacket Type: A) Polyethlene B) PVC (General Purpose) C) Polyurethane D) Plenum E) CPE F) Single Armor/PE G) Single Armor/PVC K) Jet Fuel Resistant L) Single Armor (Zero Hal.) M) MTR N) Fig.-8 P) PVDf/Armor Q) Alum. Armor R) Riser Grade PVC S) Double Armor (Steel) U) Soft Plenum V) LTR Armor W) Water Blocked X) Special-Specify Y) Dielectric Fig.-8 Z) Zero-Hal. Central Strength Member: 1) Dielectric 2) Steel 3) Aramid Yarn (coated) N) None X) Special-Specify Cable Construction: B) Breakout C) Component D) Deploying G) Tight Buffer Heavy-Duty (Indoor/Outdoor) H) Heavy-Duty (Outdoor) K) Buffered Fiber M) Medium Service (Duct) P) Premise S) Simplex T) UNI-Pak U) Single Tube Outdoor (Arial/Burial) W) Ready Access Z) Zipcord X) Special-Specify Buffer Construction: 1) Tight Buffer 3) Single Fiber Loose Tube (gel filled) 4) Multi-fiber Loose Tube (gel filled) Number of Fibers: 001=1; 002=2; 012=12; (up to 216 fibers in some cable constructions) Fiber Grade: see fiber specifications at front of this section S) Standard P) Premium Q) High Performance T) Super Fiber Size: A) SM B) 50m C) 62.5m E) 100m F) 200m G) 200/230m PCS J) 200/230m HCS XX) Special-Specify Color Coding All BICC General cables, unless customized, follow the industry standard color code system for easy identification. Cables with 12 or fewer individual components will follow the color sequence: Blue, Orange, Green, Brown, Slate White, Red, Black, Yellow, Violet, Pink, Aqua. For cables having more than 12 fibers, grouping is done following the same sequence for the subgroup and for the fibers within it. Example: 24 fiber loose tube cable with six fibers in each of four tubesTube colors will be blue, orange, green and brown. Each tube will have one each of fibers in the first six colors (blue, orange, green, brown, slate, white). Fibers are then identified by tube color/fiber colorblue/white being the white fiber in the blue tube. When cables have more than 144 fibers, a black stripe is added to each of the first six colors in order to make 18 recognizable subgroups. In some cable designs, jacketed subgroups may be numbered for identification in lieu of color coding. FOR ADDITIONAL INFORMATION ON THIS OR OTHER PRODUCTS AND THEIR AVAILABILITY, PLEASE CONTACT FIBER OPTIC CENTER, INC. Fiber Optic Center, Inc., 23 Centre Street, New Bedford, MA, 02740-6322, USA Website: www.focenter.com e-mail: sales@focenter.com, Toll Free: (800) IS-FIBER, (800) 473-4237, Tel: (508) 992-6464, Fax: (508) 991-8876