POLYFUSE(R) RESETTABLE FUSES No. HVR600 High Voltage PTC Device, 60 V / 600 V Specifications Packaging A: F: Standard UL 1434 1st Edition CSA C22.2 No. 0 CSA TIL No. CA-3A Materials Approvals cULus Recognition TUV Features This product line is designed to provide protection against induced AC power current, direct power contact and the natural lightning strike. The HVR600 product line is widely used in the field of telecommunications and networking, ISDN and XSDN eguipment. It also helps equipment manufacturers pass ITU K20, K21 and telcordia requirements. Dimensions (mm) bulk tape and ammo Insulating Material: Yellow Epoxy Polymer, UL 94V0 Round Pins: Copper alloy, tin plated Max. Device Surface Temperature in Tripped State 125 C Operating / Storage Temperature -40 C to +85 C (consider de-rating) Humidity Ageing +85 C, 85 % R.H., 1000 hours, 5 % typical resistance change Soldering Characteristics Solderability per MIL-STD-202, Method 208E Thermal Shock MIL-STD-202F, Method 107G +125 C to -40 C 10 times, 5 % typical resistance change Solvent Resistance MIL-STD-202, Method 215F, no change Marking "P", voltage, amperage rating, lot number Devices are not intended for continuous use at 250 V / 600 V! Dimensions (mm) Model HVR600P150C HVR600P150C-RA HVR600P150C-RB HVR600P150CF HVR600P160C HVR600P160C-RA HVR600P160C-R1 HVR600P160CF A Max B Max C typ D Min E Max 13,5 13,5 13,5 13,5 16,0 16,0 16,0 16,0 12,6 12,6 12,6 12,6 12,6 12,6 12,6 12,6 5,1 5,1 5,1 5,1 5,1 5,1 5,1 5,1 4,7 4,7 4,7 4,7 4,7 4,7 4,7 4,7 6,0 6,0 6,0 6,0 6,0 6,0 6,0 6,0 Physical Characteristics Lead Material packaging quantity bag ammo 0.65 dia 0.65 dia 0.65 dia 0.65 dia 0.65 dia 0.65 dia 0.65 dia 0.65 dia 200 200 200 200 200 200 200 200 Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu 600 600 600 600 500 500 500 500 Permissible continuous operating current is 100 % at ambient temperature of 20 C (68 F). * Vint :Interrupt Voltage 0.15 0.15 0.15 0.15 0.16 0.16 0.16 0.16 ITrip (A) 0.30 0.30 0.30 0.30 0.32 0.32 0.32 0.32 Vmax. Imax. Vint/AC/Vop/DC* (A) 600/60 600/60 600/60 600/60 600/60 600/60 600/60 600/60 3 3 3 3 3 3 3 3 040706 5.00 @ 1.00 5.00 @ 1.00 4.50 @ 1.00 5.00 @ 1.00 7.00 @ 1.00 9.50 @ 1.00 9.00 @ 1.00 7.00 @ 1.00 Pd max. (W) R min.( ) 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 6.0 7.0 9.0 6.0 4.0 4.0 4.0 4.0 Resistance R max.( ) RI max.( ) 12.0 10.0 12.0 12.0 10.0 7.0 8.0 10.0 22.0 20.0 22.0 22.0 18.0 16.0 17.0 18.0 Approvals * * * * * * * * * * * * * * * * Vop : Operating Voltage(V dc) NOTE: I hold = Hold current: maximum current device will pass without tripping in 20 C still air. I trip = Trip current: minimum current at which the device will trip in 20 C still air. I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) Order Information max. time to trip (s @ A) TUV HVR600P150C HVR600P150C-RA HVR600P150C-RB HVR600P150CF HVR600P160C HVR600P160C-RA HVR600P160C-R1 HVR600P160CF Ihold cURus Model Qty. OrderNumber Model Pd = R min= R 1max= Caution: Power dissipated from device when in the tripped state at 20C still air. Minimum resistance of device in initial (un-soldered) state. Maximum resistance of device at 20C measured one hour after tripping for 20 sec. Operation beyond the specified rating may result in damage and possible arcing and flame. Packaging In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. Specifications are subject to change without notice. www.littelfuse.com POLYFUSE(R) RESETTABLE FUSES No. HVR600 Average time-current curve A : HVR600P160F B : HVR600P150F Agency Specification Product HVR600P150C HVR600P160C HVR600P150CF HVR160CF Lightning Power Cross UL60950, 3rd ed. - 600 V ac, 40 A Telcordia GR - 1089 - 600 V ac, 60 A FCC part 68 - 1.0 kV 10/160 s 800 V 10/560 s Telcordia GR - 1089 - 1.0 kV 10/1000 s select a specific part number for each application based on the agency request Part-numbering system HVR P F: Tape and ammo packaging Resistance Bin Range (05:0.5 Ohm, 10: 1.0 Ohm) Rx: Resistance Range (x:A-Z or 1-9) T: Pre-tripped device F: Lead free device C: Coated device Current Rating Polyfuse Voltage Rating High Voltage Radial Device Thermal Derating Chart Model HVR600P150C HVR600P160C HVR600P150CF HVR600P160CF 040706 Ambient Operation Temperature - Ihold (A) -40 C -20 C 0 C 23 C 40 C 60 C 85 C 0.23 0.24 0.23 0.24 0.21 0.22 0.21 0.22 0.18 0.19 0.18 0.19 0.15 0.16 0.15 0.16 0.12 0.13 0.12 0.13 0.10 0.12 0.10 0.12 0.06 0.07 0.06 0.07 In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. www.littelfuse.com