In our continuing strategy to deliver unparalleled circuit protection solutions,
technical expertise and application leadership, we proudly introduce the
WICKMANN Group and its products to the Littelfuse portfolio.
040706 www.littelfuse.com
POLYFUSE® RESETTABLE FUSES
Dimensions (mm)
Order Qty. Order- Model Packaging
Information Number
No. HVR600
HVR600P150C 0.15 0.30 600/60 3 5.00 @ 1.00 1.00 6.0 12.0 22.0 • •
HVR600P150C-RA 0.15 0.30 600/60 3 5.00 @ 1.00 1.00 7.0 10.0 20.0 • •
HVR600P150C-RB 0.15 0.30 600/60 3 4.50 @ 1.00 1.00 9.0 12.0 22.0 • •
HVR600P150CF 0.15 0.30 600/60 3 5.00 @ 1.00 1.00 6.0 12.0 22.0 • •
HVR600P160C 0.16 0.32 600/60 3 7.00 @ 1.00 1.00 4.0 10.0 18.0 • •
HVR600P160C-RA 0.16 0.32 600/60 3 9.50 @ 1.00 1.00 4.0 7.0 16.0 • •
HVR600P160C-R1 0.16 0.32 600/60 3 9.00 @ 1.00 1.00 4.0 8.0 17.0 • •
HVR600P160CF 0.16 0.32 600/60 3 7.00 @ 1.00 1.00 4.0 10.0 18.0 • •
cURus
TÜV
Model Ihold I
Trip V
max. I
max. max. time to trip Pd max. Resistance Approvals
(A) Vint/AC/Vop/DC* (A) (s @ A) (W) R min.()
R max.()
RI max.()
Permissible continuous operating current is ≤ 100 % at ambient temperature of 20 ºC (68 ºF).
NOTE:
I hold = Hold current: maximum current device will pass without tripping in 20 °C still air.
I trip = Trip current: minimum current at which the device will trip in 20 °C still air.
I max = Maximum fault current device can withstand without damage at rated voltage (Vmax)
Pd = Power dissipated from device when in the tripped state at 20°C still air.
R min= Minimum resistance of device in initial (un-soldered) state.
R 1max= Maximum resistance of device at 20°C measured one hour after tripping for 20 sec.
Caution: Operation beyond the specifi ed rating may result in damage and possible arcing and fl ame.
Specifi cations are subject
to change without notice.
* Vint :Interrupt Voltage Vop : Operating Voltage(V dc)
Dimensions (mm)
Model A B C D E Physical Characteristics packaging quantity
Max Max typ Min Max Lead Material bag ammo
HVR600P150C 13,5 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 600
HVR600P150C-RA 13,5 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 600
HVR600P150C-RB 13,5 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 600
HVR600P150CF 13,5 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 600
HVR600P160C 16,0 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 500
HVR600P160C-RA 16,0 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 500
HVR600P160C-R1 16,0 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 500
HVR600P160CF 16,0 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 500
Specifi cations
Packaging
A: bulk
F: tape and ammo
Materials
Insulating Material: Yellow Epoxy Polymer,
UL 94V0
Round Pins: Copper alloy, tin plated
Max. Device Surface Temperature in Tripped State
125 °C
Operating / Storage Temperature
-40 ºC to +85 ºC (consider de-rating)
Humidity Ageing
+85 °C, 85 % R.H., 1000 hours, ± 5 % typical
resistance change
Soldering Characteristics
Solderability per MIL-STD-202, Method 208E
Thermal Shock
MIL-STD-202F, Method 107G
+125 °C to -40 °C 10 times, ±5 % typical resistance
change
Solvent Resistance
MIL-STD-202, Method 215F, no change
Marking
“P”, voltage, amperage rating, lot number
High Voltage
PTC Device, 60 V / 600 V
Standard
UL 1434 1st Edition
CSA C22.2 No. 0 CSA TIL No. CA-3A
Approvals
cULus Recognition
TÜV
Features
This product line is designed to provide protec-
tion against induced AC power current, direct
power contact and the natural lightning strike.
The HVR600 product line is widely used in the
fi eld of telecommunications and network-
ing, ISDN and XSDN eguipment. It also helps
equipment manufacturers pass ITU K20, K21 and
telcordia requirements.
Devices are not intended for
continuous use at 250 V / 600 V!
Dimensions (mm)
In our continuing strategy to deliver unparalleled circuit protection solutions,
technical expertise and application leadership, we proudly introduce the
WICKMANN Group and its products to the Littelfuse portfolio.
040706 www.littelfuse.com
POLYFUSE® RESETTABLE FUSES
No. HVR600
Thermal Derating Chart
Model Ambient Operation Temperature - Ihold (A)
-40 °C -20 °C 0 °C 23 °C 40 °C 60 °C 85 °C
HVR600P150C 0.23 0.21 0.18 0.15 0.12 0.10 0.06
HVR600P160C 0.24 0.22 0.19 0.16 0.13 0.12 0.07
HVR600P150CF 0.23 0.21 0.18 0.15 0.12 0.10 0.06
HVR600P160CF 0.24 0.22 0.19 0.16 0.13 0.12 0.07
A : HVR600P160F
B : HVR600P150F
Average time-cur rent curve
Part-numbering system
F: Tape and ammo packaging
Resistance Bin Range (05:0.5 Ohm, 10: 1.0 Ohm)
Rx: Resistance Range (x:A-Z or 1-9)
T: Pre-tripped device
F: Lead free device
C: Coated device
Current Rating
Polyfuse
Voltage Rating
High Voltage Radial Device
HVR P
Agency Specifi cation
Product Lightning Power Cross
HVR600P150C FCC part 68 - 1.0 kV 10/160 μs UL60950, 3rd ed. - 600 V ac, 40 A
HVR600P160C 800 V 10/560 μs Telcordia GR - 1089 - 600 V ac, 60 A
HVR600P150CF Telcordia GR - 1089 - 1.0 kV 10/1000 μs
HVR160CF select a specifi c part number for
each application based on the
agency request
