The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
4-PIN SOP, 1.0 Ω LOW ON-STATE RESISTANCE
1-ch Optical Coupled MOS FET
Solid State Relay
OCMOS FET
PS7214-1A
Document No. PN10298EJ02V0DS (2nd edition)
Date Published August 2006 NS CP(K)
−NEPOC Series−
1999, 2006
DESCRIPTION
The PS7214-1A is a low on-state resistance solid state relay containing a GaAs LED on the input side and MOS
FETs on the output side.
It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance.
FEATURES
• Low on-state resistance (Ron = 1.0 Ω TYP.)
• Large continuous load current (IL = 400 mA)
• 1 channel type (1 a output)
• Designed for AC/DC switching line changer
• Small and thin package (4-pin SOP, Height = 2.1 mm)
• High isolation voltage (BV = 1 500 Vr.m.s.)
• Low offset voltage
• Ordering number of taping product : PS7214-1A-E3, E4: 900 pcs/reel
: PS7214-1A-F3, F4: 3 500 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• BSI approved: No. 8241/8242
APPLICATIONS
• Measurement equipment
• FA equipment
<R>
<R>
Data Sheet PN10298EJ02V0DS
2
PS7214-1A
PACKAGE DIMENSIONS (Unit: mm)
43
12
TOP VIEW
4.4
7.0±0.3
0.5±0.3
0.15+0.10
–0.05
2.54
4.0±0.5
0.05+0.08
–0.05
2.05+0.08
–0.05
0.40+0.10
–0.05 0.25 M
1. LED Anode
2. LED Cathode
3. MOS FET
4. MOS FET
MARKING EXAMPLE (LASER MARKING)
No.1 pin Mark
Assembly Lot
Type Number
PS7214-1A
*1 Bar : Pb-Free
Remark Applicable type numbers are underlined below
N601
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
*1
14-A
N601
<R>
Data Sheet PN10298EJ02V0DS 3
PS7214-1A
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification Packing Style Safety Standard
Approval Application Part
Number*1
PS7214-1A PS7214-1A-A Pb-Free Magazine case 100 pcs Standard products PS7214-1A
PS7214-1A-E3 PS7214-1A-E3-A Embossed Tape 900 pcs/reel (UL, BSI
PS7214-1A-E4 PS7214-1A-E4-A approved)
PS7214-1A-F3 PS7214-1A-F3-A Embossed Tape 3 500 pcs/reel
PS7214-1A-F4 PS7214-1A-F4-A
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current (DC) IF 50 mA
Reverse Voltage VR 5.0 V
Power Dissipation PD 50 mW
Peak Forward Current*1 IFP 1 A
MOS FET Break Down Voltage VL 100 V
Continuous Load Current IL 400 mA
Pulse Load Current*2
(AC/DC Connection) ILP 0.8 A
Power Dissipation PD 300 mW
Isolation Voltage*3 BV 1 500 Vr.m.s.
Total Power Dissipation PT 350 mW
Operating Ambient Temperature TA −40 to +85 °C
Storage Temperature Tstg −40 to +100 °C
*1 PW = 100
µ
s, Duty Cycle = 1%
*2 PW = 100 ms, 1 shot
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output
Pins 1-2 shorted together, 3-4 shorted together.
<R>
Data Sheet PN10298EJ02V0DS
4
PS7214-1A
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter Symbol MIN. TYP. MAX. Unit
LED Operating Current IF 2 10 20 mA
LED Off Voltage VF 0 0.5 V
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 10 mA 1.2 1.4 V
Reverse Current IR VR = 5 V 5.0
µ
A
Off-state Leakage Current ILoff VD = 100 V 1.0
µ
A MOS FET
Output Capacitance Cout VD = 0 V, f = 1 MHz 120 pF
Coupled LED On-state Current IFon IL = 400 mA 2.0 mA
On-state Resistance Ron IF = 10 mA, IL = 400 mA, t ≤ 10 ms 1.0 1.2 Ω
Turn-on Time*1, 2 ton IF = 10 mA, VO = 5 V, RL = 500 Ω, 1.3 2.0 ms
Turn-off Time*1, 2 toff PW ≥ 10 ms 0.1 1.0
Isolation Resistance RI-O VI-O = 1.0 kVDC 109 Ω
Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.5 pF
*1 Test Circuit for Switching Time
V
L
R
L
I
F
R
in
Pulse Input
Input monitor monitorV
O
t
on
t
off
10 %
90 %
0
V
O
= 5 V
50 %
Output
Input
*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
<R>
Data Sheet PN10298EJ02V0DS 5
PS7214-1A
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
100
85
7550250–25
20
60
80
100
40
0
Maximum Forward Current IF (mA)
Ambient Temperature TA (˚C)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
OUTPUT CAPACITANCE vs.
Output Capacitance Cout (pF)
Applied Voltage VD (V)
Maximum Load Current IL (mA)
Ambient Temperature TA (˚C)
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
APPLIED VOLTAGE
IF = 50 mA
30 mA
20 mA
10 mA
5 mA
1 mA
100
0–25 25 50 75
1.0
1.4
1.6
1.8
1.2
0.8
Forward Voltage VF (V)Off-state Leakage Current ILoff (A)
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
AMBIENT TEMPERATURE
FORWARD VOLTAGE vs.
100
85
750–25 5025
400
600
200
0
LOAD CURRENT vs. LOAD VOLTAGE
Load Current IL (mA)
Load Voltage VL (V)
OFF-STATE LEAKAGE CURRENT vs.
AMBIENT TEMPERATURE
f = 1 MHz
10 20 30 40 50 60
200
0
150
100
50
–0.8 –0.4 0.80.4
–200
–600
–400
200
600
400
IF = 10 mA,
IL = 400 mA
0
10–6
10–11
10–8
10–7
10–9
10–10
020406080
VD = 100 V
Remark The graphs indicate nominal characteristics.
Data Sheet PN10298EJ02V0DS
6
PS7214-1A
Normalized to 1.0
at T
A
= 25 ˚C,
I
F
= 10 mA,
I
L
= 400 mA
Normalized On-state Resistance R
on
Ambient Temperature T
A
(˚C)
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION
Number (pcs)
On-state Resistance R
on
(Ω)
n = 50 pcs,
I
F
= 10 mA,
V
O
= 5 V,
R
L
= 500 Ω
n = 50 pcs,
I
F
= 10 mA,
V
O
= 5 V,
R
L
= 500 Ω
Number (pcs)
Turn-off Time t
off
(ms)
TURN-OFF TIME DISTRIBUTION
Number (pcs)
Turn-on Time t
on
(ms)
TURN-ON TIME DISTRIBUTION
Turn-on Time t
on
(ms)
Forward Current I
F
(mA)
TURN-ON TIME vs. FORWARD CURRENT
Turn-off Time t
off
(ms)
Forward Current I
F
(mA)
TURN-OFF TIME vs. FORWARD CURRENT
V
O
= 5 V,
R
L
= 500 Ω
V
O
= 5 V,
R
L
= 500 Ω
0.5
1.5
2.0
3.0
1.0
2.5
0.0 100755025–25 0 0.8 1.0 1.2
0
5
10
15
20
25
30
30
252015105
1.0
3.0
4.0
6.0
2.0
5.0
030252015105
0.05
0.15
0.20
0.30
0.10
0.25
0
0.08 0.12
0
5
10
15
20
25
30
1.3 1.5
0
5
10
15
20
25
30
n = 50 pcs,
I
F
= 10 mA,
I
L
= 400 mA,
t 10 ms
Remark The graphs indicate nominal characteristics.
Data Sheet PN10298EJ02V0DS 7
PS7214-1A
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
VO = 5 V,
RL = 500 Ω
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
VO = 5 V,
RL = 500 Ω
Normalized Turn-on Time ton
Ambient Temperature TA (˚C)
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
Normalized Turn-off Time toff
Ambient Temperature TA (˚C)
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
100
0–25 25 50 75
2.5
3.0
0.0
2.0
1.5
1.0
0.5
100
0–25 25 50 75
2.5
3.0
0.0
2.0
1.5
1.0
0.5
Remark The graphs indicate nominal characteristics.
Data Sheet PN10298EJ02V0DS
8
PS7214-1A
TAPING SPECIFICATIONS (in millimeters)
PS7214-1A-E3 PS7214-1A-E4
Tape Direction
Outline and Dimensions (Tape)
1.55±0.1
2.0±0.05
4.0±0.1
1.75±0.1
4.6±0.1
2.9 MAX.
0.3
8.0±0.1
2.4±0.1
1.5
+0.1
–0
7.4±0.1
5.5±0.05
12.0±0.2
Outline and Dimensions (Reel)
Packing: 900 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
2.0±0.5
11.9 to 15.4
Outer edge of
flange
17.5±1.0
13.5±1.0
180
+0
φ
–1.5
+1
–0
60
φ
Data Sheet PN10298EJ02V0DS 9
PS7214-1A
PS7214-1A-F3 PS7214-1A-F4
Tape Direction
Outline and Dimensions (Tape)
1.55±0.1
2.0±0.05
4.0±0.1
1.75±0.1
4.6±0.1
2.9 MAX.
0.3
8.0±0.1
2.4±0.1
1.5
+0.1
–0
7.4±0.1
5.5±0.05
12.0±0.2
Outline and Dimensions (Reel)
Packing: 3 500 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
330±2.0
φ
100±1.0
φ
2.0±0.5
11.9 to 15.4
Outer edge of
flange
17.5±1.0
13.5±1.0
13.0±0.2
φ
Data Sheet PN10298EJ02V0DS
10
PS7214-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
220˚C
Package Surface Temperature T (˚C)
Time (s)
(heating)
to 10 s
to 60 s
260˚C MAX.
Recommended Temperature Profile of Infrared Reflow
120±30 s
(preheating)
180˚C
120˚C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
<R>
Data Sheet PN10298EJ02V0DS 11
PS7214-1A
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
<R>
Data Sheet PN10298EJ02V0DS
12
PS7214-1A
The information in this document is current as of August, 2006. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
•
•
•
•
•
•
M8E 02. 11-1
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":
0604
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: contact@ncsd-hk.necel.com
Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309
Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH http://www.eu.necel.com/
TEL: +49-211-6503-0 FAX: +49-211-6503-1327
California Eastern Laboratories, Inc. http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
Compound Semiconductor Devices Division
NEC Electronics Corporation
URL: http://www.ncsd.necel.com/
For further information, please contact
PS7214-1A
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
