CLD-DS170 REV 1 PRODUCT FAMILY DATA SHEET Cree(R) XLamp(R) XHP70.2 LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS The XLamp XHP70.2 LED is the next * Available in white, configurable to 6V Characteristics...............................................2 generation of Extreme High Power LEDs or 12V by PCB layout Flux Characteristics, EasyWhite(R) Order that delivers the lowest system cost * Available in 5-step EasyWhite bins through the best lumen density, reliability at 3000K to 5000K CCT, 3-step Flux Characteristics, ANSI White Order and color consistency. Built on Cree's EasyWhite bins at 2700K to 5000K Codes and Bins..............................................6 latest highpower LED technology, the and 2-step EasyWhite bins at 2700K Relative Spectral Power Distribution............9 XHP70.2 LED improves the lumen density, to 4000K CCT Relative Flux vs. Junction Temperature........9 voltage characteristics, reliability and optical performance of the XHP70 LED in the same 7.0mm x 7.0mm footprint. The new XHP70.2 LED provides an easy dropin (R) * Available in ANSI white bins at 3000K to 7000K CCT * Available in standard, 70-, 80-, and 90minimum CRI options Codes and Bins..............................................3 Electrical Characteristics............................ 10 Relative Flux vs. Current............................. 11 Relative Chromaticity vs Current................ 12 Relative Chromaticity vs Temperature....... 13 upgrade to achieve higher system LPW for * Binned at 85C Typical Spatial Distribution......................... 13 lighting manufacturers with existing XHP70 * Maximum drive current: 4800mA Thermal Design........................................... 14 designs, eliminating redesign costs. Its (6V), 2400mA (12V) Performance Groups - Luminous Flux....... 15 unparalleled lumen density and longer * Low thermal resistance: 0.9C/W Performance Groups - Chromaticity.......... 15 lifetime at higher operating temperatures * Wide viewing angle: 125 Cree's Standard White Chromaticity also enable new and innovative lighting * Unlimited floor life at Regions Plotted on the CIE 1931 Curve..... 19 designs at lower system costs. 30C/85% RH * Reflow solderable - JEDEC JSTD020C Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions... 22 Cree's Standard Warm and Neutral White * RoHS and REACh compliant Kits Plotted on ANSI Standard * UL(R) recognized component Chromaticity Regions................................. 23 (E349212) Bin and Order-Code Format........................ 24 Reflow Soldering Characteristics............... 25 Notes........................................................... 26 Mechanical Dimensions............................. 28 Electrical Configuration.............................. 29 WWW.CREE.COM/XLAMP Tape and Reel.............................................. 30 Packaging.................................................... 31 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLAMP (R) XHP70.2 LED CHARACTERISTICS XHP70.2 LEDs are tested and binned in the 12V configuration. See the Mechanical Dimensions section on page 28 for pad layout options. Characteristics Unit Thermal resistance, junction to solder point C/W 0.9 degrees 125 Temperature coefficient of voltage (6V)* mV/C -2.9 Temperature coefficient of voltage (12V) mV/C -5.8 Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 DC forward current (6V)* mA 4800 DC forward current (12V) mA 2400 Reverse voltage V 5 Forward voltage (6V, @ 2100mA, 85C)* V 5.6 6.1 Forward voltage (12V, @ 1050mA, 85C) V 11.2 12.2 LED junction temperature C 150 Note: * Data for the 6V configuration is calculated and for reference only. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLAMP (R) XHP70.2 LED FLUX CHARACTERISTICS, EASYWHITE(R) ORDER CODES AND BINS The following table provides order codes for XLamp XHP70.2 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 24). Binning condition: TJ = 85C; 12V, IF = 1050mA Reference condition: TJ = 85C; 6V, IF = 2100mA Nominal CCT CRI Min 70 5000K 80 90 70 4500K 80 90 Typ Minimum Luminous Flux 2-Step 3-Step Group Flux (lm) @ 85C Flux (lm) @ 25C* P4 1965 2164 P2 1830 2015 N4 1710 1883 N4 1710 1883 N2 1590 1751 M4 1485 1635 XHP70B-00-00000D0HM450G N2 1590 1751 XHP70B-00-00000D0UN250G M4 1485 1635 M2 1380 1520 P4 1965 2164 P2 1830 2015 N4 1710 1883 N4 1710 1883 N2 1590 1751 M4 1485 1635 XHP70B-00-00000D0HM445G N2 1590 1751 XHP70B-00-00000D0UM445G M4 1485 1635 M2 1380 1520 Group Order Code Group Order Code 5-Step Group Order Code XHP70B-00-00000D0BP450E 50E XHP70B-00-00000D0BP250E XHP70B-00-00000D0BN450E XHP70B-00-00000D0HN450G 50G 50G XHP70B-00-00000D0HN250G XHP70B-00-00000D0UM450G XHP70B-00-00000D0UM250G XHP70B-00-00000D0BP445E 45E XHP70B-00-00000D0BP245E XHP70B-00-00000D0BN445E XHP70B-00-00000D0HN445G 45G 45G XHP70B-00-00000D0HN245G XHP70B-00-00000D0UM245G XHP70B-00-00000D0UK445G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 26). * Cree XLamp XHP70.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLAMP (R) XHP70.2 LED FLUX CHARACTERISTICS, EASYWHITE(R) ORDER CODES AND BINS - CONTINUED Nominal CCT CRI Min Typ Minimum Luminous Flux 2-Step 3-Step Group Flux (lm) @ 85C Flux (lm) @ 25C* P2 1830 2015 N4 1710 1883 N4 1710 1883 N2 1590 1751 M4 1485 1635 XHP70B-00-00000D0HM440H XHP70B-00-00000D0HM440G M4 1485 1635 XHP70B-00-00000D0UM440H XHP70B-00-00000D0UM440G M2 1380 1520 K4 1290 1420 P2 1830 2015 N4 1710 1883 N2 1590 1751 N2 1590 1751 M4 1485 1635 XHP70B-00-00000D0HM435H M2 1380 1520 XHP70B-00-00000D0UM235H K4 1290 1420 P2 1830 2015 N4 1710 1883 N2 1590 1751 N2 1590 1751 Group Order Code Group Order Code 70 80 70 3500K 80 XHP70B-00-00000D0HN440H 40H 3000K XHP70B-00-00000D0HN240H XHP70B-00-00000D0UM240H Order Code XHP70B-00-00000D0BP240E XHP70B-00-00000D0BN440E XHP70B-00-00000D0HN440G 40G 40G XHP70B-00-00000D0UK440H XHP70B-00-00000D0HN240G XHP70B-00-00000D0UM240G XHP70B-00-00000D0UK440G XHP70B-00-00000D0BP235E 35E XHP70B-00-00000D0BN435E XHP70B-00-00000D0BN235E 35H 80 90 40H 35H 90 70 Group 40E 4000K 90 5-Step XHP70B-00-00000D0HN235H XHP70B-00-00000D0UK435H 35G 35G XHP70B-00-00000D0HN235G XHP70B-00-00000D0HM435G XHP70B-00-00000D0UM235G XHP70B-00-00000D0UK435G XHP70B-00-00000D0BP230E 30E XHP70B-00-00000D0BN430E XHP70B-00-00000D0BN230E 30H XHP70B-00-00000D0HN230H M4 1485 1635 XHP70B-00-00000D0HM430H M2 1380 1520 XHP70B-00-00000D0UM230H K4 1290 1420 K2 1200 1321 30H XHP70B-00-00000D0UK430H XHP70B-00-00000D0UK230H 30G XHP70B-00-00000D0HN230G XHP70B-00-00000D0HM430G XHP70B-00-00000D0UM230G 30G XHP70B-00-00000D0UK430G XHP70B-00-00000D0UK230G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 26). * Cree XLamp XHP70.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLAMP (R) XHP70.2 LED FLUX CHARACTERISTICS, EASYWHITE(R) ORDER CODES AND BINS - CONTINUED Nominal CCT CRI Min Typ Minimum Luminous Flux Group Flux (lm) @ 85C Flux (lm) @ 25C* M4 1485 1635 M2 1380 1520 K2 1200 1321 80 2-Step Group 27H 2700K 90 27H J4 1120 1233 Order Code XHP70B-00-00000D0HM427H XHP70B-00-00000D0HM227H XHP70B-00-00000D0UK227H XHP70B-00-00000D0UJ427H 3-Step Group 27G 27G Order Code 5-Step Group Order Code XHP70B-00-00000D0HM427G XHP70B-00-00000D0HM227G XHP70B-00-00000D0UK227G XHP70B-00-00000D0UJ427G Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 26). * Cree XLamp XHP70.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLAMP (R) XHP70.2 LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS The following table provides order codes for XLamp XHP70.2 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 24). Binning condition: TJ = 85C; 12V, IF = 1050mA Reference condition: TJ = 85C; 6V, IF = 2100mA Nominal CCT 7000K CRI Chromaticity Regions 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U Minimum Luminous Flux Group P2 1830 2015 XHP70B-00-0000-0D00P20DT 0 68 N4 1710 1883 XHP70B-00-0000-0D00N40DT N2 1590 1751 XHP70B-00-0000-0D00N20DT P2 1830 2015 XHP70B-00-0000-0D0BP20DT N4 1710 1883 XHP70B-00-0000-0D0BN40DT N2 1590 1751 XHP70B-00-0000-0D0BN20DT N2 1590 1751 XHP70B-00-0000-0D0HN20DT M4 1485 1635 XHP70B-00-0000-0D0HM40DT P2 1830 2015 XHP70B-00-0000-0D00P20E1 N4 1710 1883 XHP70B-00-0000-0D00N40E1 N2 1590 1751 XHP70B-00-0000-0D00N20E1 P2 1830 2015 XHP70B-00-0000-0D0BP20E1 N4 1710 1883 XHP70B-00-0000-0D0BN40E1 N2 1590 1751 XHP70B-00-0000-0D0BN20E1 N2 1590 1751 XHP70B-00-0000-0D0HN20E1 M4 1485 1635 XHP70B-00-0000-0D0HM40E1 70 0 1A, 1B, 1C, 1D 68 70 80 0 6000K 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U Order Code Typ 80 6500K Flux (lm) Flux (lm) @ 85C @ 25C* Min 70 80 90 68 P2 1830 2015 XHP70B-00-0000-0D00P20DV N4 1710 1883 XHP70B-00-0000-0D00N40DV P2 1830 2015 XHP70B-00-0000-0D0BP20DV N4 1710 1883 XHP70B-00-0000-0D0BN40DV N2 1590 1751 XHP70B-00-0000-0D0HN20DV M4 1485 1635 XHP70B-00-0000-0D0HM40DV M4 1485 1635 XHP70B-00-0000-0D0UM40DV M2 1380 1520 XHP70B-00-0000-0D0UM20DV Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 26). * Cree XLamp XHP70.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLAMP (R) XHP70.2 LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - CONTINUED Nominal CCT CRI Chromaticity Regions Minimum Luminous Flux Min Typ 0 68 70 5700K 2A, 2B, 2C, 2D 80 90 0 68 70 5000K 3A, 3B, 3C, 3D 80 90 0 70 4500K 4A, 4B, 4C, 4D 80 90 68 Group Flux (lm) Flux (lm) @ 85C @ 25C* Order Code P4 1965 2164 XHP70B-00-0000-0D00P40E2 P2 1830 2015 XHP70B-00-0000-0D00P20E2 N4 1710 1883 XHP70B-00-0000-0D00N40E2 P4 1965 2164 XHP70B-00-0000-0D0BP40E2 P2 1830 2015 XHP70B-00-0000-0D0BP20E2 N4 1710 1883 XHP70B-00-0000-0D0BN40E2 N4 1710 1883 XHP70B-00-0000-0D0HN40E2 N2 1590 1751 XHP70B-00-0000-0D0HN20E2 M4 1485 1635 XHP70B-00-0000-0D0HM40E2 N2 1590 1751 XHP70B-00-0000-0D0UN20E2 M4 1485 1635 XHP70B-00-0000-0D0UM40E2 M2 1380 1520 XHP70B-00-0000-0D0UM20E2 P4 1965 2164 XHP70B-00-0000-0D00P40E3 P2 1830 2015 XHP70B-00-0000-0D00P20E3 N4 1710 1883 XHP70B-00-0000-0D00N40E3 P4 1965 2164 XHP70B-00-0000-0D0BP40E3 P2 1830 2015 XHP70B-00-0000-0D0BP20E3 N4 1710 1883 XHP70B-00-0000-0D0BN40E3 N4 1710 1883 XHP70B-00-0000-0D0HN40E3 N2 1590 1751 XHP70B-00-0000-0D0HN20E3 M4 1485 1635 XHP70B-00-0000-0D0HM40E3 N2 1590 1751 XHP70B-00-0000-0D0UN20E3 M4 1485 1635 XHP70B-00-0000-0D0UM40E3 M2 1380 1520 XHP70B-00-0000-0D0UM20E3 P4 1965 2164 XHP70B-00-0000-0D00P40E4 P2 1830 2015 XHP70B-00-0000-0D00P20E4 N4 1710 1883 XHP70B-00-0000-0D00N40E4 P4 1965 2164 XHP70B-00-0000-0D0BP40E4 P2 1830 2015 XHP70B-00-0000-0D0BP20E4 N4 1710 1883 XHP70B-00-0000-0D0BN40E4 N4 1710 1883 XHP70B-00-0000-0D0HN40E4 N2 1590 1751 XHP70B-00-0000-0D0HN20E4 M4 1485 1635 XHP70B-00-0000-0D0HM40E4 M4 1485 1635 XHP70B-00-0000-0D0UM40E4 M2 1380 1520 XHP70B-00-0000-0D0UM20E4 K4 1290 1420 XHP70B-00-0000-0D0UK40E4 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 26). * Cree XLamp XHP70.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLAMP (R) XHP70.2 LED FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - CONTINUED Nominal CCT CRI Chromaticity Regions Min Typ 0 68 70 4000K 5A, 5B, 5C, 5D 80 90 3500K 3000K 6A, 6B, 6C, 6D 7A, 7B, 7C, 7D Minimum Luminous Flux 70 70 Group Flux (lm) Flux (lm) @ 85C @ 25C* Order Code P2 1830 2015 XHP70B-00-0000-0D00P20E5 N4 1710 1883 XHP70B-00-0000-0D00N40E5 P2 1830 2015 XHP70B-00-0000-0D0BP20E5 N4 1710 1883 XHP70B-00-0000-0D0BN40E5 N4 1710 1883 XHP70B-00-0000-0D0HN40E5 N2 1590 1751 XHP70B-00-0000-0D0HN20E5 M4 1485 1635 XHP70B-00-0000-0D0HM40E5 M4 1485 1635 XHP70B-00-0000-0D0UM40E5 M2 1380 1520 XHP70B-00-0000-0D0UM20E5 XHP70B-00-0000-0D0UK40E5 K4 1290 1420 P2 1830 2015 XHP70B-00-0000-0D0BP20E6 N4 1710 1883 XHP70B-00-0000-0D0BN40E6 N2 1590 1751 XHP70B-00-0000-0D0BN20E6 N4 1710 1883 XHP70B-00-0000-0D0BN40E7 N2 1590 1751 XHP70B-00-0000-0D0BN20E7 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 26). * Cree XLamp XHP70.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLAMP (R) XHP70.2 LED Relative Spectral Power RELATIVE SPECTRAL POWER DISTRIBUTION 100% Relative Radiant Power 80% 60% 6500 K, 68 CRI 3000 K, 80 CRI 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction RELATIVE FLUX VS. JUNCTION TEMPERATURE Temperature Reference condition: 6V, IF = 2100mA; 12V, IF = 1050mA 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLAMP (R) XHP70.2 LED ELECTRICAL CHARACTERISTICS (TJ = 85C) 4800 Forward Current (mA) 4000 3200 6V 2400 1600 800 0 5.00 5.25 5.50 5.75 6.00 Forward Voltage (V) Electrical Characteristics (Tj = 85C) 2400 Forward Current (mA) 2000 1600 1200 12 V 800 400 0 10.0 10.5 11.0 11.5 12.0 Forward Voltage (V) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLAMP (R) XHP70.2 LED RELATIVE FLUX VS. CURRENT (TJ = 85C) 200% 180% Relative Luminous Flux 160% 140% 120% 100% 6V 80% 60% 40% 20% 0% 0 800 1600 2400 3200 4000 4800 Forward Current (mA) Relative Intensity vs. Current (Tj = 85C) 200% Relative Luminous Flux 180% 160% 140% 120% 100% 12 V 80% 60% 40% 20% 0% 0 400 800 1200 1600 2000 2400 Forward Current (mA) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLAMP (R) XHP70.2 LED RELATIVE CHROMATICITY VS CURRENT (WARM WHITE) 0.020 0.016 0.012 6V 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 0 800 1600 2400 3200 4000 4800 Current (mA) Relative Chromaticity Vs. Current, WW 0.020 0.016 0.012 12 V 0.008 0.004 CCx 0.000 CCy -0.004 -0.008 -0.012 -0.016 -0.020 0 400 800 1200 1600 2000 2400 Current (mA) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 XLAMP (R) XHP70.2 LED RELATIVE CHROMATICITY VS TEMPERATURE (WARM WHITE) Relative Chromaticity Temperature Reference condition: 6V, IF Vs. = 2100mA; 12V,WW IF = 1050mA 0.020 0.016 0.012 0.008 0.004 0.000 CCx -0.004 CCy -0.008 -0.012 -0.016 -0.020 25 50 75 100 125 150 Tj (C) TYPICAL SPATIAL DISTRIBUTION Typical Spatial Radiation Pattern Reference condition: TJ = 85C; 6V, IF = 2100mA; 12V, IF = 1050mA 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle () Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 13 XLAMP (R) XHP70.2 LED THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 5000 Maximum Current (mA) 4500 6V 4000 3500 3000 2500 2000 Rj-a = 1C/W 1500 Rj-a = 2C/W 1000 Rj-a = 3C/W 500 0 Rj-a = 4C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Thermal Design 2500 Maximum Current (mA) 2250 12 V 2000 1750 1500 1250 1000 Rj-a = 1C/W 750 Rj-a = 2C/W 500 Rj-a = 3C/W 250 0 Rj-a = 4C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (C) Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 XLAMP (R) XHP70.2 LED PERFORMANCE GROUPS - LUMINOUS FLUX (TJ=85C) XLamp XHP70.2 LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. Group Code Minimum Luminous Flux Maximum Luminous Flux J4 1120 1200 K2 1200 1290 K4 1290 1380 1485 M2 1380 M4 1485 1590 N2 1590 1710 N4 1710 1830 P2 1830 1965 P4 1965 2100 Q2 2100 2260 PERFORMANCE GROUPS - CHROMATICITY XLamp XHP70.2 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures - 2-Step Bin Code 40H 35H 30H 27H CCT 4000K 3500K 3000K 2700K x y 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 15 XLAMP (R) XHP70.2 LED PERFORMANCE GROUPS - CHROMATICITY (CONTINUED) EasyWhite Color Temperatures - 3-Step Ellipse Major Axis Minor Axis x y a b Rotation Angle () 5000K 0.3447 0.3553 0.00840 0.00312 65.0 45G 4500K 0.3611 0.3658 0.00852 0.00330 61.5 40G 4000K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5 Major Axis Minor Axis Bin Code CCT 50G Center Point EasyWhite Color Temperatures - 5-Step Ellipse Center Point x y a b Rotation Angle () 5000K 0.3447 0.3553 0.01400 0.00520 65.0 45E 4500K 0.3611 0.3658 0.01420 0.00550 61.5 40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7 35E 3500K 0.4073 0.3917 0.01545 0.00690 54.0 30E 3000K 0.4338 0.4030 0.01390 0.00680 53.2 Bin Code CCT 50E ANSI White Bins CCT Bin Code 0A0 0B0 7000 K 0C0 0D0 ANSI White Bins x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.2920 CCT Bin Code ANSI White Bins x y 0.2980 0.2880 x y 0.3048 0.3207 0.2950 0.2970 0.3009 0.3042 0.3130 0.3290 0.3144 0.3186 0.3042 0.3037 0.3060 0.2895 0.2937 0.3068 0.3113 0.3135 0.3028 0.2895 0.3135 0.3304 0.2870 0.3210 0.3115 0.3391 0.2962 0.3220 0.2984 0.3133 0.2937 0.3312 0.3130 0.3290 0.2962 0.3220 0.3048 0.2984 0.3133 0.3207 0.2962 0.3220 0.3115 0.3391 0.2962 0.3220 0.3028 0.3304 0.2937 0.3312 0.3205 0.3481 0.3005 0.3415 0.3213 0.3048 0.3373 0.3207 0.3028 0.3304 0.3130 0.3290 0.2984 0.3133 0.3037 0.2937 0.3130 0.3290 0.3048 0.3207 0.3009 0.3042 0.3213 0.3373 0.3068 0.3113 0.3068 0.3113 0.3221 0.3261 0.3009 0.3042 0.3093 0.2993 0.3144 0.3186 0R0 0S0 7000 K 0T0 0U0 CCT Bin Code 1A0 1B0 7000 K 1C0 1D0 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 16 XLAMP (R) XHP70.2 LED PERFORMANCE GROUPS - CHROMATICITY (CONTINUED) ANSI White Bins CCT Bin Code 1R0 1S0 7000 K 1T0 1U0 ANSI White Bins x y 0.3068 0.3113 CCT 0.3144 0.3186 0.3161 0.3059 0.3093 0.2993 0.3005 0.3415 0.3099 0.3509 0.3115 0.3391 0.3028 0.3304 0.3099 0.3509 0.3196 0.3602 0.3205 0.3481 0.3115 Bin Code ANSI White Bins x y 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 0.3243 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3215 0.3350 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3391 0.3290 0.3144 0.3186 0.3221 0.3261 0.3231 0.3120 0.3161 0.3059 2A0 2B0 6000K 2C0 2D0 x y 0.3222 0.3243 0.3290 0.3300 0.3290 0.3180 0.3231 0.3120 0.3196 0.3602 0.3290 0.3690 0.3290 0.3538 0.3207 0.3462 0.3290 0.3690 0.3381 0.3762 0.3376 0.3616 0.3417 0.3290 0.3538 0.3290 0.3417 0.3290 0.3300 0.3371 0.3490 0.3366 0.3369 0.3366 0.3369 0.3361 0.3245 0.3290 0.3300 0.3290 0.3180 ANSI White Bins CCT Bin Code 3A0 3B0 5000K 3C0 3D0 CCT Bin Code 2R0 2S0 6000K 2T0 2U0 ANSI White Bins x y 0.3371 0.3451 0.3440 0.3427 0.3366 0.3376 CCT Bin Code x y 0.3490 0.3530 0.3597 0.3554 0.3615 0.3659 0.3512 0.3465 0.3369 0.3515 0.3487 0.3616 0.3548 0.3736 0.3463 0.3687 0.3641 0.3804 0.3451 0.3554 0.3530 0.3597 0.3371 0.3490 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620 0.3451 0.3554 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487 0.3440 0.3427 4A0 4B0 4500K 4C0 4D0 0.3533 0.362 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3615 0.3659 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3590 0.3521 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 17 XLAMP (R) XHP70.2 LED PERFORMANCE GROUPS - CHROMATICITY (CONTINUED) ANSI White Bins CCT Bin Code 5A0 5B0 4000K 5C0 5D0 ANSI White Bins x y 0.3670 0.3578 0.3702 0.3722 0.3825 0.3798 0.3783 0.3646 0.3702 0.3722 0.3736 0.3874 0.3869 0.3958 0.3825 0.3798 0.3825 0.3798 0.3869 0.3958 0.4006 0.4044 0.3950 CCT Bin Code ANSI White Bins x y 0.3889 0.3690 0.3941 0.3848 0.4080 0.3916 0.4017 0.3751 0.3941 0.3848 0.3996 0.4015 0.4146 0.4089 0.4080 0.3916 0.4080 0.3916 0.4146 0.4089 0.4299 0.4165 0.3875 0.4221 0.3783 0.3646 0.3825 0.3798 0.3950 0.3875 0.3898 0.3716 6A0 6B0 3500K 6C0 6D0 CCT Bin Code x y 0.4147 0.3814 0.4221 0.3984 0.4342 0.4028 0.4259 0.3853 0.4221 0.3984 0.4299 0.4165 0.4430 0.4212 0.4342 0.4028 0.4342 0.4028 0.4430 0.4212 0.4562 0.4260 0.3984 0.4465 0.4071 0.4017 0.3751 0.4259 0.3853 0.4080 0.3916 0.4342 0.4028 0.4221 0.3984 0.4465 0.4071 0.4147 0.3814 0.4373 0.3893 7A0 7B0 3000K 7C0 7D0 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 18 XLAMP (R) XHP70.2 LED CREE'S STANDARD WHITE CHROMATICITY REGIONS PLOTTED ON THE CIE 1931 CURVE ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 0.37 6500 K 2T 0.36 2S CCy 8000 K 2B 1S 0.34 0T 0.33 0S 0.32 2C 1T 0.35 0B 0.31 1D 2U 2R 1A 0D 0A 0.30 2A 1B 0C 2D 1C ANSI C78.377A 1U 1R 0U 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 19 XLAMP (R) XHP70.2 LED CREE'S STANDARD WHITE CHROMATICITY REGIONS PLOTTED ON THE CIE 1931 CURVE - CONTINUED ANSI Neutral White and ANSI Warm White 0.45 0.44 2700 K 3000 K 0.43 0.42 3500 K 0.41 4000 K 6C 0.40 CCy 7C 7B 0.39 5000 K 0.38 4C 0.37 3C 3B 3D 0.35 4B 7D 7A 5C 6D 5B 5700 K 0.36 6B 4500 K 5D 6A 5A ANSI C78.377A 4D 4A 3A 0.34 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.33 CCx Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 20 XLAMP (R) XHP70.2 LED CREE'S STANDARD WHITE CHROMATICITY REGIONS PLOTTED ON THE CIE 1931 CURVE - CONTINUED 0.44 ANSI C78.377 Quadrangle 0.43 EasyWhite 5-Step EasyWhite 3-Step 0.42 3500 K EasyWhite 2-Step 0.41 2700 K 3000 K 4000 K 0.40 4500 K 0.39 5000 K 0.38 CCy 0.37 5700 K 0.36 6500 K 0.35 0.34 8000 K 0.33 0.32 0.31 0.30 0.29 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.28 CCx Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 21 XLAMP (R) XHP70.2 LED CREE'S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS 0.40 5000 K 0.39 0.38 5700 K 0.37 6500 K 2T 0.36 2S DT 0.35 CCy 8000 K 2B 1S 0T 0.33 0C 0B 0.31 2D 1C 2A 1B 0S 0.32 2C 1T 0.34 1D 2U 1U 0D 0A ANSI C78.377A 2R 1A 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx 0.40 0.40 5000 K 0.39 0.38 DV 6500 K 0.36 0.36 2C 8000 K 0A 0R 1R 0U CCx 0.36 0.35 0.34 0.28 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.30 ANSI C78.377A 2R 1U 0R 0.29 0.29 2U 1A 0D 0.30 0.29 0.28 0C 0B 0.31 1R 0U 0.30 0S 0.32 1D 0.33 0A CCy 1U 3R 2A 1B 0.32 0.31 ANSI C78.377A 2R 1A 0D 0T 0.33 2U 3A 2D 1C 0.31 0C 0B 1D 2C 2B 1S 0.30 0S 0.32 2A 1B 3B 2S 1T 8000 K 0.34 0.29 0T 0.33 2D 1C 2T E1 0.35 2B 1S 3S 6500 K 2T 1T 0.34 5700 K 0.37 2S 0.35 CCy 0.38 5700 K 0.37 5000 K 0.39 CCx 0.40 5000 K 0.39 0.38 5700 K E2 0.37 6500 K 0.36 3B 2S 0.35 CCy 3S 2T 2C 1T 8000 K 0.34 0T 0.33 0S 0.32 0C 0A 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 2D 1C 1B 0B 0.31 3A 2B 1S 1U 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 22 XLAMP (R) XHP70.2 LED CREE'S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS 0.45 0.44 2700 K 3000 K 0.43 E7 0.42 3500 K 4000 K CCy 0.40 0.39 5000 K 0.38 E4 4B 3C 0.36 3B 3D 0.35 7B 6C 6B 7D 7A 5C 6D 5B 4C E3 0.37 E5 4500 K 7C E6 0.41 6A ANSI C78.377A 5D 5A 4D 4A 3A 0.34 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.33 CCx Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 23 XLAMP (R) XHP70.2 LED BIN AND ORDER-CODE FORMAT Bin codes and order codes for XHP70.2 LEDs are configured in the following manner: Order Code Bin Code Series XHP70B = XHP70.2 Series XHP70B = XHP70.2 Internal code Chromaticity group Minimum luminous flux group Vf Class D = 6-V/12-V configurable Chromaticity group CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum SSSSSS-BD-GGGG-HJKLMMNNN CRI specification 0 = No minimum CRI B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Vf Class D = 6-V/12-V configurable Configuration B = Internal code D = Reel size SSSSSS-E-NNN-MMM-JK-L-PP Internal code Voltage performance group Luminous flux group Internal code Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 24 XLAMP (R) XHP70.2 LED REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp XHP70.2 LEDs to be compatible with JEDEC JSTD020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer's responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Time Lead-Free Solder 1.2C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 C Time Within 5C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 25 XLAMP (R) XHP70.2 LED NOTES Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Cree did not perform Room Temperature Operating Life (RTOL) testing on the XHP70.2 LED. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XHP70.2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 26 XLAMP (R) XHP70.2 LED NOTES - CONTINUED UL(R) Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 27 XLAMP (R) XHP70.2 LED MECHANICAL DIMENSIONS Thermal vias, if present, are not shown on these drawings. 6 5 4 66 55 44 6 5 4 All dimensions NOTICE NOTICE NOTICE 6 5 CREE CREE CONFIDENTIAL. CREECONFIDENTIAL. CONFIDENTIAL. THIS PLOT THISPLOT AND PLOT THE AND INFORMATION THEINFORMATION INFORMATION NOTICE THIS AND THE CONTAINED CONTAINED WITHIN WITHIN ARE THE ARE PROPRIETARY THE PROPRIETARY AND AND CREE CONFIDENTIAL. THIS PLOT NOTICE AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL CONFIDENTIAL INFORMATION INFORMATION OF CREE, OFCREE, INC. CREE, THIS INC. PLOT THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF INC. THIS PLOT CREE CONFIDENTIAL. THIS PLOT AND MAY NOT MAY BE NOT COPIED, BECOPIED, COPIED, REPRODUCED REPRODUCED OR DISCLOSED OR DISCLOSED TO THIS ANY TO ANY THE INFORMATION CONFIDENTIAL INFORMATION OF CREE, INC. PLOT MAY NOT BE REPRODUCED OR DISCLOSED ANY CONTAINED WITHIN ARE THETO PROPRIETARY UNAUTHORIZED UNAUTHORIZED PERSON PERSON THE WITHOUT WRITTEN THE WITHOUT WRITTEN CONSENT CONSENT UNAUTHORIZED THE WITHOUT WRITTEN CONSENT MAY NOT BEPERSON COPIED, REPRODUCED OR DISCLOSED ANYINC. AND CONFIDENTIAL INFORMATION OFTO CREE, THIS PLOT OF CREE OFCREE INC. CREEINC. INC. OF UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY OF CREE INC. UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT OF CREE INC. .56 .56 7.00 7.00 7.00 .56 .56 OPTICAL OPTICAL 7.00 OPTICAL OPTICAL REFERENCE REFERENCE REFERENCE 7.00 D DD REFERENCE OPTICAL D REFERENCE D 3 4 Anode Side 7.00 7.00 7.00 6.76 REV 6.75 6.75 6.75 3.90 3.90 3.90 .70 .70 .70 3.90 .70 .56 3.13 3.13 3.13 .50 .50 .50 C .70 .70 .70 6.70 .70 .70 6.70 6.70 6.70 .70 .70 .70 .70 .70 .70 .70 .70 3.90 3.90 3.90 3.90 4.34 6.70 6.70 .70 .70 4.34 R3.76 4.34 4.34 Side View .70 6.70 6.70 6.70 .70 .70 .70 .70 .70 3.90 4.34 .50 .50 BB B 6.76 6.76 6.76 6.76 .50 .50 B 6.76 3.13 .50 3.13 3.13 3.13 .70 .70 .70 1.24 1.24 1.24 .25 .25 .25 .70 .25 .70 3.13 3.13 6.76 6.76 6.76 6.76 .25 .25 .25 .50 6.76 6.76 6.76 .50 .25 .50 6.76 .50 6.76 6.76 . .25 3.13 3.13 3.13 1.29 3.13 .70 .70 .50 .50 .70 6.70 .70 3.13 B Bottom View Thermal pad is electrically isolated 1.24 .70 .703.90 .70 .70 .70 6.76 .50 Cathode Side R3.76 R3.76 R3.76 R3.76 OPTICAL REFERENCE OPTICAL REFERENCE OPTICAL REFERENCE OPTICAL REFERENCE CC OPTICAL REFERENCE C Top View C 6.75 .70 3.13 6.76 6.76 6.76 7.00 2 3 REV REV REV 6.75 3.13 7.00 33 3 are .13mm unless otherwise indicated. 3 3.1 .25 1.29 1.29 1.29 1.29 1.29 1.29 1.29 .70 .70 .70 6.70 6.70 6.70 .70 .70 .70 .70 6.70 .70 .70 RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN .70 RECOMMENDED PATTERN (HATCHED AREA IS OPENING) (HATCHED AREA ISAREA OPENING) RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD (HATCHED ISSTENCIL OPENING) RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD (HATCHED AREA IS OPENING) RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD 6v/12v RECOMMEND 6v/12v 6v/12v 12v 12vRecommended 6v6v Pad 6V Configuration 12v Recommended PCB6vSolder PCB Solder Pad 12V Configuration 6v/12v (HATCHE 6v RECOMMENDED PCB SOLDER PAD 12v RECOMMENDED PCB SOLDER PAD 12vto anode and cathodeUNLESS DRAWN DR B (thermal pad is electrically isolated) 6v DRA (thermal pad is connected and UNLESS isOTHERWISE UNLESS OTHERWISE SPECIFIED SPEC OTHERWISE SPECIF D D. CRONIN DIMENSIONS DIMENSIONS ARE OTHERWISE IN ARE ARE AA UNLESS S DIMENSIONS ININD. CHECK CH A MILLIMETERS MILLIMETERS AND AFTER AND FINISH. AFTER F CH not electrically isolated) DIMENSIONS AREFIN IN MILLIMETERS AND AFTER TOLERANCE TOLERANCE UNLESSUNLESS SPECIFIED: UNLESS SPEC MILLIMETERS AND AFT TOLERANCE SPECIF A .XX TOLERANCE .25 .XX .25 .25 APPROV AP UNLESS SM .XX APP 1.29 A .XXX .XXX .125 .XXX .125 .125.25 .XX X .5 X .5 6 66 6 .5 .125 .XXX THIRDTHIRD ANGLE THIRD PROJECTION ANGLE PROJECTIONX X ANGLE PROJECTION MO MATERIA .5 MA FOR SHEET FOR METAL SHEET PARTS METAL ONLY PARTS FOR SHEET METAL PARTS THIRD ANGLE PROJECTION METAL PA .X FOR .XSHEET 1.5 .X1.5 1.5 ANGLE .XXTHIRD .XX .75 .XX .75 ALL DIMENSIONS .13MM UNLESS OTHERWISE NOTED ALL DIMENSIONS AT ATAT .13MM UNLESS OTHERWISE NOTEDNOTED .X ALL DIMENSIONS .13MM UNLESS OTHERWISE .75PROJEC 1.5 .XXX .XXX .25 .XXX .25 .25 .75PROT FIN FINAL ALL DIMENSIONS AT .13MM UNLESS OTHERWISE NOTED .XX FINA X X.5 X .XXX .5.5 .25 ALL DIMENSIONS AT .13MM UNLESS OTHERWISE NOTED X .5 1.6 FINISH: 1.6 1.6 SURFACE SURFACE FINISH: FINISH: SURFACE 1.6 SURFACE FINISH: 5 4 3 2 55 44 33 5 4 3 6 5 4 3 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 28 6.76 .50 XLAMP (R) XHP70.2 LED C R3.76 4.34 MECHANICAL DIMENSIONS - CONTINUED 1.24 6.70 .70 .70 .70 .70 .25 3.13 3.13 12 V .50 .50 6.76 6.76 B .25 SOLDER PAD LINK 3.13 .50 1.29 POSITIVE A .70 .70 RECOMMENDED STENCIL PATTERN Recommended Stencil Pattern (HATCHED AREA IS OPENING) 6v/12v 6V & 12V Configurations DATE DRAWN BY (hatchedUNLESS area is open) SPECIFIED OTHERWISE RECOMMENDED PCB SOLDER PAD 12v NEGATIVE B .13MM UNLESS OTHERWISE NOTED ELECTRICAL CONFIGURATION L DIMENSIONS AT 6V 5 1.29 6.70 4 4600 Silicon Drive DIMENSIONS ARE IN D. CRONIN 11/15/16 Durham, N.C 27703 MILLIMETERS AND AFTERCHECK FINISH. DATE Phone (919) 313-5300 TOLERANCE UNLESS SPECIFIED: Fax (919) 313-5558 .XX .25 APPROVED DATE A TITLE .XXX .125 X .5 THIRD ANGLE PROJECTION XHP70B OUTLINE MATERIAL FOR SHEET METAL PARTS ONLY .X 1.5 REV. DRAWING NO. SIZE .XX .75 .XXX .25 FINAL PROTECTIVE FINISH 2610-00075 C A X .5 12 V SCALE SHEET OF 1 /1 1.6 12.000 SURFACE FINISH: SOLDER PAD LINK 3 NEGATIVE A POSITIVE A NEGATIVE B POSITIVE B 2 1 POSITIVE A NEGATIVE B 6-V Configuration 12-V Configuration 6V NEGATIVE A POSITIVE A NEGATIVE B POSITIVE B Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 29 XLAMP (R) XHP70.2 LED 6 6 5 4 5 4 3 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATIONCONTAINED WITHIN ARE THE PROPRIETARY AND CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. 3 2 2 1 REVISONS REV DESCRIPTION B REVERSED POLARITY IN VIEW R REV BY DATE B DC DESCRIPTION APP'D 1/6/15 REVERSED POLARIT TAPE AND REEL D D All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. D All dimensions are .13mm unless otherwise indicated. 1.5 .1 1.5 .1 END User Feed Direction User Feed Direction 12.1 4.10 CATHODE SIDE END 12.1 4.10 1.75 .10 CATHODE START SIDE 16 +.3 -.0 C C 4.6 ANODE SIDE ANODE SIDE C 7.4 0.36 Leader 420mm (min) of empty pockets sealed with tape (40 pockets min.) Loaded Pockets Leader (1000Lamps) 420mm (min) of empty pockets sealed with tape (40 pockets min.) Trailer Loaded Pockets 180mm (min) of empty pockets (1000Lamps) sealed with tape (100 pockets min.) Trailer 180mm (min) of empty pockets sealed with tape (100 pockets min.) START User Feed Direction User Feed Direction B B B 13mm 13mm DATE DRAWN BY A A 13 " 13 " THIRD ANGLE PROJECTION 6 5 6 4 5 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 .XXX .25 X .5 SURFACE FINISH: 1.6 3 4 DATE DRAWN BY D. CRONIN CHECK 12/9/14 DATE -- -- APPROVED DATE TITLE -- ANGLE PROJECTION -THIRD MATERIAL -- SIZE FINAL PROTECTIVE FINISH -2 SCALE 3 UNLESS OTHERWISE SPECIFIED D. CRONIN DIMENSIONS ARE IN 4600 Silicon Drive CHECK MILLIMETERS AND AFTER FINISH. Durham, N.C 27703 -TOLERANCE UNLESS SPECIFIED: Phone (919) 313-5300 .XX .25 APPROVED Fax (919) 313-5558 .XXX .125 -X .5 FOR SHEET METAL PARTS ONLYSPEC XHP70 LOADING 12/9/14 DATE -DATE A -- TITLE MATERIAL .X .XX .XXX DRAWING NO. 1.5 .75 .25 1.6 3.000 -- SIZE REV. FINAL PROTECTIVE FINISH .5 2402-00056 C SURFACEXFINISH: SHEET 1 B -- OF 1 /1 2 Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 30 SCALE C XLAMP (R) XHP70.2 LED PACKAGING Humidity Indicator Card (inside bag) Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright (c) 2017-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 31