1 Publication Order Number :
NSVJ3557A3/D
© Semiconductor Components Industries, LLC, 2015
July 2015 - Rev. 0
www.onsemi.com
NSVJ3557SA3
Automotive JFET designed for compact and efficient designs and
including high gain performance. AEC-Q101 qualified JFET and PPAP
capable suitable for automotive applications.
Features
Large | yfs |
Small Ciss
This small package enables sets to be smaller and th inner
Ultralow noise figure
Pb-Free and RoHS compliance
AEC-Q101 qualified and PPAP capable
Typical Applications
AM Tuner RF Amplifier
Low Noise Amplifier
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS at Ta = 25°C (Note 1)
Parameter Symbol Value Unit
Drain-to-Source Voltage VDSX 15 V
Gate-to-Drain Voltage VGDS 15 V
Gate Current IG 10 mA
Drain Current ID 50 mA
Allowable Power Dissipation PD 200 mW
Operating Junction and
Storage Temperature TJ, TStg 55 to150 C
Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage
the device. If any of these limits are exceeded, device functionality should
not be assumed, damage may occur and reliability may be affected.
N-Channel JFET
15V, 10 to 32mA, 35mS
SC-59 / CP3
3
1
2
ELECTRICAL CONNECTION
N-Channel
12
3
1 : Source
2 : Drain
3 : Gate
ORDERING INFORMATION
See detailed ordering and shipping
information on page 5 of this data sheet
NSVJ3557SA3
www.onsemi.com
2
ELECTRICAL CHARACTERISTICS at Ta = 25°C (Note 2)
Parameter Symbol Conditions Value Unit
min typ max
Gate-to-Drain Breakdown Voltage V(BR)GDS IG = 10A, VDS = 0V 15 V
Gate Cutoff Current IGSS VGS = 10V, VDS = 0V
1nA
Cutoff Voltage VGS(off) VDS = 5V, ID = 100A 0.3 0.7 1.5 V
Drain Current IDSS V
DS = 5V, VGS = 0V 10 32 mA
Forward Transfer Admittance | yfs | VDS = 5V, VGS = 0V, f = 1kHz 24 35 mS
Input Capacitance Ciss VDS = 5V, VGS = 0V, f = 1MHz 10 pF
Reverse Transfer Capacitance Crss 2.9 pF
Noise Figure NF VDS = 5V, Rg=1kΩ, ID =1mA, f=1kHz 1 dB
Note 2 : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted.
Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.
NSVJ3557SA3
www.onsemi.com
3
NSVJ3557SA3
www.onsemi.com
4
PACKAGE DIMENSIONS
unit : mm
SC-59 / CP3
CASE 318BJ
ISSUE O
XXX M
XXX = Specific Device Code
M = Date Code
= Pb-Free Package
GENERIC
MARKING DIAGRAM
*This information is generic. Please refer to
device data sheet for actual part marking.
1
*For additional information on our Pb-Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
(Note: Microdot may be in either location)
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH, PRO-
TRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS,
OR GATE BURRS SHALL NOT EXCEED 0.20 PER SIDE.
4. DIMENSIONS D AND E1 ARE MEASURED AT THE OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE
LEAD BETWEEN 0.10 AND 0.20 FROM THE TIP.
DIM
AMIN MAX
0.95
MILLIMETERS
A1
e0.95 BSC
A2 0.20 0.40
1.35
0.00 0.10
b0.35
c
D2.75 3.05
0.50
0.10 0.20
E2.30
E1
L0.35 0.75
2.70
1.35 1.65
b
E
D
2
3
1
A1
A
SEATING
PLANE
C
SIDE VIEW
A
M
0.10 C
TOP VIEW
A
3X
E1
e
L
3X
A2 c
3X
END VIEW
1.00
3X
DIMENSIONS: MILLIMETERS
SOLDERING FOOTPRINT*
0.95
RECOMMENDED
PITCH
3.40
0.80
3X
NSVJ3557SA3
www.onsemi.com
5
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject toall
applicable copyright laws and is not for resale in any manner.
ORDERING INFORMATION
Device Marking Package Shipping
NSVJ3557SA3T1G IR
SC-59 3-Lead / CP3
Pb-Free) 3,000 / Tape & Reel
† For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF
