+ PIN 3 CASE PIN 2 Positive CT Features PIN 1 * Low forward voltage drop. PIN 3 CASE PIN 2 Negative CT Suffix "A" * High surge current capacity. 1 * High current capability. FEP16AT - FEP16JT FEP16AT - FEP16JT PIN 1 2 3 TO-220AB * High reliability. PIN 1 AC PIN 3 CASE PIN 2 Doubler Suffix "D" Fast Rectifiers (Glass Passivated) Absolute Maximum Ratings* Symbol VRRM IF(AV) IFSM Tstg TJ TA = 25C unless otherwise noted Value Parameter Units 16AT 16BT 16CT 16DT 16FT 16GT 16HT 16JT 50 100 150 200 300 400 500 600 Maximum Repetitive Reverse Voltage Average Rectified Forward Current, .375 " lead length @ TA = 100C Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range Operating Junction Temperature V 16 A 200 A -55 to +150 -55 to +150 C C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Symbol Parameter Value Units PD Power Dissipation 8.33 W RJA Thermal Resistance, Junction to Ambient 15 C/W RJL Thermal Resistance, Junction to Lead 2.2 C/W Electrical Characteristics Symbol TA = 25C unless otherwise noted Device Parameter 16AT VF trr IR CT Forward Voltage @ 8.0A Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A Reverse Current @ rated VR TA = 25C TA = 100C Total Capacitance VR = 4.0. f = 1.0 MHz 2001 Fairchild Semiconductor Corporation 16BT 16CT 16DT 16FT 0.95 Units 16GT 16HT 1.3 35 16JT 1.5 50 ns A A 10 500 85 V 60 pF FEP16AT - FEP16JT, Rev. C FEP16AT - FEP16JT 20 16 12 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS 8 4 0 0 25 50 75 100 125 Ambient Temperature [C] 150 175 Figure 1. Forward Current Derating Curve Peak Forward Surge Current, IFSM [A] Average Rectified Forward Current, IF [A] Typical Characteristics 200 160 120 80 40 0 2 5 10 20 Number of Cycles at 60Hz 50 100 Figure 2. Non-Repetitive Surge Current Reverse Characteristics 1000 100 FEP16AT-FEP16DT 10 Reverse Current, IR [mA] Forward Current, IF [A] 1 FEP16FT-FEP16JT 1 0.1 TA = 25 C Pulse Width = 300 s 2% Duty Cycle 0.01 0.4 0.6 0.8 1 1.2 1.4 Forward Voltage, VF [V] 100 T A = 100 C 10 1 T A = 25 C 0.1 1.6 1.8 Figure 3. Forward Voltage Characteristics 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 4. Reverse Current vs Reverse Voltage Total Capacitance, CT [pF] 100 90 80 70 FEP16AT-FEP16DT 60 50 FEP16FT-FEP16JT 40 1 2 5 10 20 Reverse Voltage, VR [V] 50 100 Figure 5. Total Capacitance 50 NONINDUCTIVE 50 NONINDUCTIVE +0.5A trr (-) DUT 50V (approx) 50 NONINDUCTIVE Pulse Generator (Note 2) 0 -0.25A (+) OSCILLOSCOPE (Note 1) -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Reverse Recovery Time Characterstic and Test Circuit Diagram 2001 Fairchild Semiconductor Corporation FEP16AT - FEP16JT, Rev. C TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DenseTrenchTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM FRFETTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM LittleFETTM MicroFETTM MicroPakTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM STAR*POWERTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM TruTranslationTM UHCTM UltraFET VCXTM STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4