15W High Reliable Green Medical Encapsulated Type EN 60601-1 IEC 60601-1 EN60601-1 series + + 8 ANSI/AAMI ES60601-1 MPM-15 IEC60601-1 Features 2.06"x1.07" compact size Medical safety approved (2 x MOPP) according to ANSI/AAMI ES60601-1 and IEC/EN60601-1 Suitable for BF application with appropriate system consideration No load power consumption<0.075W (0.09W for 3.3V) Extremely low leakage current Wide operating temp. range -40 ~ +85 EMI class B for class configuration Protections: Applications Portable medical device Mobile clinical workstation Medical computer monitor Medical examination instrument Short circuit / Overload / Over voltage / Over temperature No minimum load required 3 years warranty Description MPM-15 is a 15W high density and small size (52 . 4 * 27 . 2 * 24mm) AC/DC module type medical power supply series offered in pin type. It features the operation for 80~264VAC, a low no load power consumption less than 0.075W (0.09W for 3.3V) , a high efficiency up to 87%, Class (no FG) double insulation, outstanding dissipation and high lifespan thanks to the interior potting, 5G anti-vibration, high EMC performance, 4KVAC isolation, etc. The design observes IEC / EN60601 - 1 and ANSI/AAMI ES60601 - 1version three with 2xMOPP level and ultra-low leakage current (<80A). It is very suitable for BF (patient contact) type medical device or relevant equipment. Model Encoding MPM - 15 - 5 Output voltage Rated wattage Series name File Name:MPM-15-SPEC 2019-12-13 15W High Reliable Green Medical Encapsulated Type MPM-15 series SPECIFICATION MODEL MPM-15-3.3 MPM-15-5 MPM-15-12 MPM-15-15 MPM-15-24 DC VOLTAGE 3.3V 5V 12V 15V 24V RATED CURRENT 3.5A 3A 1.25A 1A 0.63A 0 ~ 3A 0 ~ 1.25A 0 ~ 1A 3.3A 15W 16.5W 1.38A 15W 1.1A 15W 0 ~ 0.63A 0.69A 16.6W 16.5W 16.6W 180mVp-p CURRENT RANGE PEAK CURRENT Note.2 0 ~ 3.5A 3.85A 11.6W RATED POWER PEAK LOAD(10sec.) OUTPUT Note.3 12.7W RIPPLE & NOISE (max.) Note.4 150mVp-p 150mVp-p 150mVp-p 180mVp-p VOLTAGE TOLERANCE Note.5 2.0% 2.0% 2.0% 2.0% 2.0% 0.5% 0.5% 0.3% 0.3% 0.3% LOAD REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1500ms, 30ms/230VAC 87% 86.5% LINE REGULATION HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT 40ms/230VAC 1500ms, 30ms/115VAC at full load 10ms/115VAC at full load Note.6 80 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 83.5% 0.6A/115VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 85.5% 0.3A/230VAC COLD START 20A/115VAC LEAKAGE CURRENT (max.) Note.7 Touch current <80A/264VAC PROTECTION 15.1W 86.5% 45A/230VAC OVERLOAD 110% ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 13.8 ~ 16.2V 3.8 ~ 5V 5.8~ 6.8V Protection type : Shut off o/p voltage, clamping by zener diode OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -40 ~ +85 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT SOLDERING TEMPERATURE VIBRATION LEAD TEMPERATURE 17.3 ~ 20.3V 27.6 ~ 32.4V -40 ~ +85, 10 ~ 95% RH non-condensing 0.03%/ (0 ~ 60) 2605/10sec.max. 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes 2605,5s (max.) OPERATING ALTITUDE Note.8 5000 meters IEC60601-1, EN60601-1, EAC TP TC 004, UL ANSI/AAMI ES60601-1(3.1 version), CAN/CSA-C22 3rd Edition approved; Design SAFETY STANDARDS refer to EN60335-1 Primary-Secondary: 2xMOPP ISOLATION LEVEL WITHSTAND VOLTAGE I/P-O/P:4KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Parameter Standard Test Level / Note Conducted emission EN55011 (CISPR11) Class B Radiated emission EN55011 (CISPR11) Class B Harmonic current EN61000-3-2 Class A SAFETY & Voltage flicker EN61000-3-3 ----- EMC EN60601-1-2 Parameter Standard Test Level / Note ESD EN61000-4-2 EMC EMISSION (Note.9) EMC IMMUNITY NOTE EN61000-4-3 EFT bursts Surge susceptibility EN61000-4-4 Conducted susceptibility EN61000-4-6 Magnetic field immunity EN61000-4-8 Voltage dip, interruption EN61000-4-11 EN61000-4-5 DIMENSION 1210Khrs min. MIL-HDBK-217F (25) 52.4*27.2*24mm (L*W*H) or 2.06*1.07*0.94 inch PACKING 0.056Kg; 240pcs/14.4Kg/0.97CUFT MTBF OTHERS RF field susceptibility Level 4, 15KV air ; Level 4, 8KV contact Level 3, 10V/m( 80MHz~2.7GHz ) Table 9, 9~28V/m( 385MHz~5.78GHz ) Level 3, 2KV Level 3, 1KV/Line-Line Level 3, 10V Level 4, 30A/m 100% dip 1 periods, 30% dip 25 periods, 100% interruptions 250 periods 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. No minimum load required. 3. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 4. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1f & 47f parallel capacitor. 5. Tolerance : includes set up tolerance, line regulation and load regulation. 6. Derating may be needed under low input voltages. Please check the derating curve for more details. 7. Touch current was measured from primary input to DC output. 8. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 9. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:MPM-15-SPEC 2019-12-13 15W High Reliable Green Medical Encapsulated Type MPM-15 series Block Diagram fosc : 100KHz RECTIFIERS & FILTER EMI FILTER I/P POWER SWITCHING PWM CONTROL O.L.P. RECTIFIERS & FILTER +V -V DETECTION CIRCUIT Derating Curve 100 80 70 12V~24V 3.3V,5V LOAD (%) 50 30 -40 -30 -20 -10 0 10 20 30 40 50 55 60 70 80 85 (HORIZONTAL) AMBIENT TEMPERATURE () Output Derating VS Input Voltage 100 90 80 LOAD (%) 70 60 50 40 80 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:MPM-15-SPEC 2019-12-13 MPM-15 15W High Reliable Green Medical Encapsulated Type Mechanical Specification Case No.219A series Unit:(mm) 52.4 AC/N -V 3.2 3.2 24 45 3.4 +V 20.8 27.2 8 3.51mm 1.04 AC/L P/N diameter:1.04 BOTTOM VIEW SIDE VIEW Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:MPM-15-SPEC 2019-12-13