VG 95218 T025 G
Issue 2
26th February 2019
Conductor - Insulation -
Flexible, Rope Stranded Fuel and Diesel
Bare Copper Resistant Elastomer
(FDR 25) - Black
CONDUCTOR FINISHED WIRE
Maximum Minimum Diameter Maximum
Area Number Max. Diameter Resistance Insulation (mm) Weight
mm² of Strand (mm) @20 °C Thickness Lower Upper (kg/km)
Strands Dia. (/km) (mm) Spec Target Spec
Min Max Limit Limit
VG 95218 T025 G007 10 7x7x26 0.10 4.0 5.0 1.90 0.92 6.60 6.90 7.20 135
VG 95218 T025 G008 16 7x7x42 0.10 5.5 6.5 1.20 0.92 8.00 8.40 8.80 209
VG 95218 T025 G001 25 7x7x67 0.10 7.0 8.0 0.745 1.13 10.00 10.40 10.80 328
VG 95218 T025 G006 35 7x7x93 0.10 8.5 9.5 0.535 1.86 13.10 13.60 14.10 499
VG 95218 T025 G002 50 7x7x3x44 0.10 10.5 11.5 0.375 1.98 15.40 15.90 16. 40 694
VG 95218 T025 G009 70 7x7x3x62 0.10 12.5 13.5 0.275 2.15 17.70 18.30 18. 90 955
VG 95218 T025 G003 95 7x7x3x85 0.10 15.5 16.5 0.205 2.32 21.10 21.70 22. 30 1343
VG 95218 T025 G010 120 7x7x4x80 0.10 17.0 19.0 0.160 2.49 23.10 24.10 25. 10 1772
VG 95218 T025 G004 150 7x7x7x57 0.10 19.5 21.5 0.128 2.36 25.30 26.30 27. 30 1966
VG 95218 T025 G005 240 7x7x7x94 0.10 25.5 27.5 0.079 2.07 30.60 31.60 32. 60 3085
ADDITIONAL
REQUIREMENTS:
Spark test on jacket in accordance with BS 5099 at 6 kV.
PERFORMANCE Shall be tested to the issue in effect of Raychem Test Regime WSD 955
REQUIREMENTS: Shall meet the requirements of the issue in effect of VG 95218 Part 25 Specification
for Type G cables.
JACKET MARKING: The mark shall be:
e.g.
Raychem - VG 95218 T025 G### - K1010
Where:
"###" = Individual part code.
e.g:
25mm² shall be marked: Raychem - VG 95218 T025 G001 - K1010
©2019 Tyco Electronics UK Ltd, a TE Connectivity Ltd. company. All Rights Reserved.
Page 1 of 2
Page 2 is for internal use only
SINGLE CORE INSULATED WIRE, FLEXIBLE, 150°C, 600 VOLT
The complete requirements for procuring the wire described herein shall consist of this document
Part Description
This drawing and t he information set forth hereon are the propert y of
Tyco Elec tronic s UK Ltd, and are to be held in trust and confidenc e.
Publi cation, dupli c ation, disclosure or use for any purpose not
expressly authorised in writing by Tyco Electronics UK Ltd is
prohibited.
This specification sheet takes precedence over
documents referenced herein. As Tyco Electronics UK
Ltd. reserve the right to make changes in construction
without notice please contact Tyco Electronics UK Ltd to
ensure that this document is the latest issue.
Tyco Electronics UK Ltd.
Faraday Road
Dorcan
SWINDON
SN3 5HH
Tel: +44 (0)1793 528171
Fax: +44 (0)1793 572516
TE Connectivity is a trading name of Tyco Electronics UK Ltd,
Which is registered in England and Wal es, number 550926.
Registered office: Faraday Road, Dorcan, Swindon, SN3 5HH
Website : www.te.com
