AANA 45W Reliable Green Medical Power Supply RPS-45 series cFAk us CB CE fil ANSI/AAMI ES60601-1 _EN60601-1 IEC60601-1 @ Features HM Applications * 3"x2" compact size * Oral irrigator * Medical safety approved (2 x MOPP) according to * Hemodialysis machine ANSI/AAMI ES60601-1 and IEC/EN60601-1 * Medical computer monitors * Suitable for BF application with appropriate system consideration * Sleep apnea devices * Cooling by free air convection * EMI class B for class II configuration * No load power consumption<0.1W * Extremely low leakage current * Protections: Short circuit / Overload / Over voltage * Lifetime > 50K hours * Operating altitude up to 4000 meters * 3 years warranty @ Description RPS-45 is a 45W highly reliable green PCB type medical power supply with a high power density on the 3 by 2 footprint. It accepts 80~264VAC input and offers various output voltages between 3.3V and 48V. The working efficiency is up to 91% and the extremely low no load power consumption is down below 0.1W. RPS-45 is able to be used for Class II (no FG) system design. The extremely low leakage currentis less than 100A. In addition, it conforms to international medical regulations (2*MOPP) and EMC EN55011, perfectly fitting all kinds of BF rated patient contact medical system equipment. i Model Encoding RPS- 45 - 3.3) Output voltage Rated wattage Series name File Name:RPS-45-SPEC 2018-06-21MW RPS-45 series 45W Reliable Green Medical Power Supply SPECIFICATION ORDER NO. RPS-45-3.3 RPS-45-5 RPS-45-7.5 RPS-45-12 RPS-45-15 RPS-45-24 RPS-45-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 48V RATED CURRENT 8A 8A 5.4A 3.8A 3A 1.9 0.94A CURRENT RANGE 0~8.8A 0~8.8A 0~5.95A 0~4.18A 0~3.3A 0~2.1A 0~1.03A RATED POWER 26.4W 40W 40.5W 45.6W 45W 45.6W 45.1W OUTPUT |PEAKLOAD(10sec.) Note.2| 29W 44W 44.6W 50.2W 49.5W 50.2W 49.4W RIPPLE & NOISE (max.) Note.3) 60mVp-p 60mVp-p 80mVp-p 100mVp-p 100mVp-p 120mVp-p 120mVp-p VOLTAGE ADJ.RANGE 3.1~3.6V 4.7~5.5V 7.12~8.3V 11.4~13.2V 13.5~16.5V 22.8~27.6V 45.6~52.8V VOLTAGE TOLERANCE Note.4| 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 500ms, 30ms / 230VAC 500ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 30ms / 230VAC 16ms / 115VAC at full load VOLTAGE RANGE Note.5| 80 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz INPUT EFFICIENCY (Typ.) 80.5% 83% 85% 88% 89% 90% 91% AC CURRENT (Typ.) 1.2A/ 115VAC 1A/230VAC INRUSH CURRENT (Typ.) | COLD STAR 30A/115VAC 60A/230VAC LEAKAGE CURRENT(max.) Note.6| Touch current< 100 uA/264VAC OVERLOAD 115 ~ ws rated output power __ Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE 38-0 | 5.7~6.8V | 8.6~11.3V 13.8~16.2V 17.2~20.3V 28.4~32.4V 55.2~64.8V Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. -30 ~ +70C (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT | STORAGE TEMP., HUMIDITY | -40 ~ +85C, 10 ~ 95% RH non-condensing TEMP. COEFFICIENT 0.03% 1 C (0~50C) VIBRATION 10 ~ 500Hz, 2G 10min./cycle, period for 60min. each along X, Y, Z axes OPERATING ALTITUDE Note.7} 4000 meters IEC60601-1, TUV EN60601-1, EAC TP TC 004,UL ANSI/AAMI ES60601-1 (3.1 version), SAFETY STANDARDS CANICSA-C22.2 No. 60601-1:14- Edition 3 approved:Design refer to EN60335-1 ISOLATION LEVEL Primary-Secondary: 2xMOPP WITHSTAND VOLTAGE I|P-O/P: 4KVAC ISOLATION RESISTANCE /P-O/P:100M Ohms / 500VDC / 25C/ 70% RH Parameter Standard Test Level / Note Conducted emission EN55011 (CISPR11) Class B SAFETY & | EMC EMISSION Radiated emission EN55011 (CISPR11) Class B EMC Harmonic current EN61000-3-2 Class A (Note. 8) Voltage flicker EN61000-3-3 0 we EN60601-1-2 Parameter Standard Test Level / Note ESD EN61000-4-2 Level 4, 15KV air ; Level 4, 8KV contact RF field susceptibility EN61000-4-3 ine o-28Vim SE5Mre-5 78H) EFT bursts EN61000-4-4 Level 3, 2KV EMC IMMUNITY Surge susceptibility EN61000-4-5 Level 4, 2KV/Line-Line Conducted susceptibility EN61000-4-6 Level 3, 10V Magnetic field immunity EN61000-4-8 Level 4, 30A/m Voltage dip, interruption EN61000-4-11 ae neal MTBF 726.2Khrs min. MIL-HDBK-217(25C) OTHERS |DIMENSION (L*W*H) 76.2*50.8*24mm or 3"* 2" *0.945" inch PACKING 0.11Kg; 120pcs/14.2Kg/0.97CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature. 2. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1f & 47f parallel capacitor. 4, Tolerance : includes set up tolerance, line regulation and load regulation. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. Touch current was measured from primary input to DC output. 7. The ambient temperature derating of 3.5C/1000m with fanless models and of 5C/1000m with fan models for operating altitude higher than 2000m(6500ft). 8. The power supply is considered a component which will be installed into a final equipment. "All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness." The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http:/Avwww.meanwell.com) NOTE File Name:RPS-45-SPEC 2018-06-21MW MEAN WELL 45W Reliable Green Medical Power Supply RPS-45 series Hi Block Diagram fosc : 65KHz po EMI FILTER RECTIFIERS POWER | RECTIFIERS Oo 4V RECTIFIER FILTER SWITCHING FILTER ov 29 |__| DETECTION | Hix CIRCUIT O.L.P. CONTROL rity u O.V.P. @ Derating Curve 100 7 80 4 60F 7 5Q}------------------------------ << 40 4 a | oO _l 20 za -30 0 10 20 30 40 70 (HORIZONTAL) AMBIENT TEMPERATURE (C) i Static Characteristics 90 F 80 F 70 60 F 50 F LOAD (%) 40 80 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (V) 60Hz File Name:RPS-45-SPEC 2018-06-21MW MEAN WELL 45W Reliable Green Medical Power Supply RPS-45 series Hi Mechanical Specification AC Input Connector (CN1) : JST B3P-VH or equivalent PinNo. | Assignment | Mating Housing Terminal 1 AC/N 9 No Pi JST VHR JST SVH-21T-P 1.1 orin or equivalent or equivalent 3 ACIL DC Output Connector (CN2) : JST B4P-VH or equivalent PinNo. | Assignment | Mating Housing Terminal 1 +V 2 +V JST VHR JST SVH-21T-P1.1 or equivalent or equivalent 3 -V 4 -V Hi Installation Manual Please refer to : http://www.meanwell.com/manual.html Top View 76.2 3.175 lo 69.85 & oO <p FS1 AC FUSE HS100 T2A/250V mL | 1 a Lo S = CN1 SVR1 & i |e _ a \ ba [ ] [TT oOo Side View kh woN = 4-3.2 CaseNo. Unit:mm File Name:RPS-45-SPEC 2018-06-21