MINIA TURE FUSEHOLDERS INIATURE Panel Mount, Shocksafe 5x20mm Fuses Specifications 11,9 -0,15 SW14 15 + 0,3 M12,7x1,5 max. 7 9,4 Holder / No. 850 0,5 4 +0,2 16,2 13 -0,3 12 -0,1 Standard IEC 60127-6 UL 512 CSA C22.2. No.39 Approvals VDE Report SEMKO UL Recognized CSA SEV 33 +0,4 12,7 -0,1 VDE Mounting Panel alternatives 12.7mm diameter D-hole or 13mm round hole Admissible torque on plastic hex nut is 1.2Nm Terminals Cap / No. 855 1 Solderable only, 4mm x 0.5mm (850) Solderable or 2.8mm quick connect - fits 0.5mm tab (851) 6 8,3 + 0,3 1,8 Protection Class & Category IP 40 (with Cap 855 acc. to IEC 60529) IP 54 (with Cap 856 acc. to IEC 60529) PC2 (IEC 60127-6) Without silicon ring (IP 40) Materials 14,2 Holder: Black Duroplastic UL 94V0 Cap: Black Thermoplastic UL94VO Sealing Ring: Silicon (Cap 856) Metal Parts: Copper alloy, corrosion protected Terminals: Solderable, tinned 20,8 + 0,5 Holder / No. 851 34,6 +0,4 11,9 -0,15 Electrical Data (23C) Rated Voltage: Rated Current: Rated Power : 0,5 4 +0,2 12,7 -0,1 Vibration Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 500Hz at 10g acceleration 6 8,3 + 0,3 1,8 1 Contact Resistance 5m Impulse Voltage 4 kV, 50 Hz, 1 min., dry 14,2 20,8 + 0,5 Order Information Insulation Resistance > 10 3 M (500 VDC, 1 min.) Solderability 235C, 2 sec. (Wave) 350C, 1 sec. (Soldering Iron) Soldering Heat Resistance Packaging 350C, 5 sec. (IEC 60068-2-20) Bulk (100 pcs.) Minimum Cross Section No. 850 0000 100 No. 855 0000 100 No. 851 0000 100 No. 856 0000 100 Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 050805 9,4 +10C to +60C relative humidity 75% yearly average, without dew, maximum value for 30 days - 95% Cap / No. 856 Holder, IP 40 Cap, without Ring, IP 40 Holder, IP 54 Cap, with Ring, IP 54 -40C to +85C (consider de-rating) Stock Conditions Panel alternatives With silicon ring (IP 54) (from front side only) Operating TTemperature emperature 4W (SEV) -40C/+85C/21 days (IEC 60068-2-1...3) 16,2 13 -0,3 12 -0,1 250V 10A 3.2W (VDE/SEMKO) Climatic TTest est 2,8 38,4 +0,5 Order Numbers SW14 15 + 0,3 M12,7x1,5 max. 7 Conductor - 1.5mm 2 Marking Part No., 250V, Approvals Unit Weight 4.1g (850) / 1.8g (855) 4.2g (851) / 1.9g (856) Specifications are subject to change without notice In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. WebSite www.littelfuse.com