IL755, ILD755 www.vishay.com Vishay Semiconductors Optocoupler, Photodarlington Output, AC Input, High Gain (Single, Dual Channel) A/C 1 6 B C/A 2 5 C NC 3 4 E A 1 8 E C 2 7 C C 3 6 C A 4 5 E FEATURES * AC or polarity insensitive inputs * Built-in reverse polarity input protection * Industry standard DIP package * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS * Designed for applications monitoring of AC signals requiring detection or AGENCY APPROVALS * UL1577, file no. E52744 system code H, double protection i179037-1 * CSA 93751 DESCRIPTION * BSI IEC 60950; IEC 60065 The IL755, ILD755 are bidirectional input optically coupled isolators. They consist of two gallium arsenide infrared emitting diodes coupled to a silicon NPN photodarlington per channel. * DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 (pending), available with option 1 * CQC The IL755 is single channel Darlington optocoupler. The ILD755 has two isolated channels in a single DIP package. ORDERING INFORMATION I L x 7 5 5 - PART NUMBER # CTR BIN X 0 # PACKAGE OPTION # T TAPE AND REEL Option 7 DIP-# 7.62 mm > 0.7 mm CTR (%) AGENCY CERTIFIED/PACKAGE UL, CSA, BSI, CQC DIP-# SMD-#, option 7 VDE, UL, CSA, BSI, CQC DIP-# SMD-#, option 7 SINGLE CHANNEL, 6 PIN DUAL CHANNEL, 8 PIN 2 mA 1 mA 2 mA 750 1000 750 1 mA 1000 IL755-1 IL755-2 ILD755-1 ILD755-2 IL755-1X007T (1) IL755-2X007T - ILD755-2X007T 750 1000 750 1000 IL755-1X001 - - - - - ILD755-1X017 - Notes * Additional options may be possible, please contact sales office. (1) Also available in tubes; do not add "T" to end. Rev. 1.6, 02-Dec-11 Document Number: 83641 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL755, ILD755 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Forward continuous current Power dissipation IF 60 mA Pdiss 100 mW 1.33 mW/C Derate linearly from 25C OUTPUT Collector emitter breakdown voltage BVCEO 60 V Collector base breakdown voltage BVCBO 60 V IL755-1 200 mW IL755-2 200 mW 150 mW Power dissipation Pdiss ILD755-1 Derate linearly from 25C ILD755-2 150 mW IL755-1 2.6 mW/C IL755-2 2.6 mW/C ILD755-1 2.0 mW/C ILD755-2 2.0 mW/C 7500/5300 VAC peak/VRMS COUPLER Isolation test voltage between emitter and detector t=1s VISO Creepage distance 7 mm Clearance distance 7 mm IL755-1 250 mW IL755-2 250 mW 400 mW Total power dissipation Ptot ILD755-1 Derate linearly from 25 C ILD755-2 400 mW IL755-1 3.0 mW/C IL755-2 3.0 mW/C ILD755-1 3.0 mW/C 3.0 mW/C Storage temperature ILD755-2 Tstg - 55 to + 150 C Operating temperature Tamb - 55 to + 100 C 10 s Lead soldering time at 260 C Note * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 10 mA VF 1.2 1.5 V Collector emitter breakdown voltage IC = 1.0 mA BVCEO 60 75 V Collector base breakdown voltage IC = 10 A BVCBO 60 90 V VCE = 10 V, IF = 0 A ICEO IC = 10 mA, IF = 10 mA VCEsat INPUT Forward voltage OUTPUT Collector emitter leakage current 10 100 nA 1 V COUPLER Collector emitter saturation voltage Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Rev. 1.6, 02-Dec-11 Document Number: 83641 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL755, ILD755 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER Current transfer ratio TEST CONDITION PART SYMBOL MIN. IF = 2 mA, VCE = 5.0 V IL755-1 CTR 750 TYP. MAX. UNIT % IF = 2 mA, VCE = 5.0 V ILD755-1 CTR 750 % IF = 1 mA, VCE = 5.0 V IL755-2 CTR 1000 % IF = 1 mA, VCE = 5.0 V ILD755-2 CTR 1000 % SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION VCC = 10 V, IF = 2 mA, RL = 100 Rise time Fall time VCC = 10 V, IF = 2 mA, RL = 100 Rise time VCC = 10 V, IF = 1 mA, RL = 100 VCC = 10 V, IF = 1 mA, RL = 100 Fall time PART SYMBOL IL755-1 tr MIN. TYP. 50 MAX. UNIT s ILD755-1 tr 50 s IL755-1 tf 50 s ILD755-1 tf 50 s IL755-2 tr 70 s ILD755-2 tr 70 s IL755-2 tf 70 s ILD755-2 tf 70 s 3.0 60 40 85 C 20 25 C 0 - 55 C - 20 - 40 - 60 - 1.5 - 1.0 - 0.5 0.0 0.5 1.0 0.5 Vce = 1 V 2.0 Vce = 5 V 1.5 1.0 0.5 1 10 100 Fig. 3 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current NIce - Normalized (Ice) NCTRce - Normalized (CTRce) Vce = 5 V 1.0 iil755_03 2.5 iil755_02 1.5 IF - LED Current (mA) Normalized to: Vce = 5 V IF = 1 mA 0.0 0.1 IF = 2 mA 0.1 4.0 3.0 Vce = 5 V 2.0 1.5 Fig. 1 - LED Forward Current vs. Forward Voltage 3.5 Normalized to: 2.5 0.0 VF - LED Forward Voltage (V) iil755b_01 NCTRce - Normalized CTRce I F - LED Forward Current (mA) TYPICAL CHARACTERSITICS (Tamb = 25 C, unless otherwise specified) 100 Normalized to: Vce = 5 V IF = 2 mA 10 Vce = 5 V Vce = 1 V 1 0.1 Vce = 1 V 1 10 100 0.01 0.1 IF - LED Current (mA) 1 10 100 IF - LED Current (mA) iil755_04 Fig. 2 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current Rev. 1.6, 02-Dec-11 Fig. 4 - Normalized Non-Saturated and Saturated ICE vs. LED Current Document Number: 83641 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL755, ILD755 www.vishay.com 1 20 Normalized to: IF = 10 mA tpHL - High/Low Propagation Delay (s) NIce - Normalized Ice 10 Vishay Semiconductors Vce = 5 V Vce = 5 V Vce = 1 V 0.1 0.01 0.001 1 k 10 100 5 0 0.1 100 10 1 IF - LED Current (mA) Vcc = 5 V Vth = 1.5 V 15 10 5 0 iil755_08 20 15 IF - LED Current (mA) iil755_05 Fig. 5 - Normalized Non-Saturated and Saturated Collector-Emitter Current vs. LED Current Fig. 8 - High to Low Propagation Delay vs. Collector Load Resistance and LED Current hFE - Forward Transfer Gain 10 000 IF Vce = 5 V 8000 6000 VO 4000 tD tR t PLH Vce = 1 V 2000 VTH = 1.5 V 0 0.01 0.1 1 10 Fig. 6 - Non-Saturated and Saturated hFE vs. Base Current tpLH - Low/High Propagation Delay (s) tF tS iil755_09 Ib - Base Current (A) iil755_06 t PHL 100 Fig. 9 - Switching Waveform 80 Vcc = 5 V Vth = 1.5 V VCC = 10 V 1.0 k 60 f = 10 kHz, DF = 50 % 220 40 RL VO 470 20 100 0 0 iil755_07 5 10 15 IF = 1 mA 20 IF - LED Current (mA) Fig. 7 - Low to High Propagation Delay vs. Collector Load Resistance and LED Current Rev. 1.6, 02-Dec-11 iil755_10 Fig. 10 - Test Circuit, Saturated and Non-Saturated Operation Document Number: 83641 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL755, ILD755 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 3 2 1 4 5 6 Pin one ID 6.4 0.1 ISO method A 8.6 0.1 7.62 typ. 1.2 0.1 1 min. 3.555 0.255 18 4 typ. 2.95 0.5 0.8 min. 0.85 0.05 0.25 typ. 3 to 9 0.5 0.05 7.62 to 8.81 i178004 2.54 typ. Option 7 7.62 typ. Pin one ID 4 3 2 6.5 6.3 1 4.6 4.1 0.7 min. 6.645 0.165 5 6 7 8.0 min. 8 ISO method A 8.4 min. 9.77 0.14 10.3 max. 18447 0.95 0.19 7.62 typ. 0.79 4 typ. 3.555 0.255 6.095 0.255 1.27 10 0.70 0.19 0.51 0.05 3.045 0.255 3 to 9 2.54 typ. 0.25 0.05 i178006 PACKAGE MARKING (example) IL755 V YWW H 68 Notes * The VDE logo is only marked on option 1 parts. * Tape and reel suffix (T) is not part of the package marking. Rev. 1.6, 02-Dec-11 Document Number: 83641 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000