Building Forward Together
PCI-7250/7251, LPCI-7250, LPCIe-7250, cPCI-7252
8-CH Relay Outputs & 8-CH Isolated DI Cards
Features
●
Supports a 32-bit 5 V PCI bus (PCI-7250/7251)
●
Supports a 32-bit 3.3 V or 5 V PCI bus (LPCI-7250)
●
x1 lane PCI Express Interface (LPCIe-7250)
●
3U Eurocard form factor, CompactPCI compliant
(PICMG 2.0 R2.1) (cPCI-7252)
●
4-CH SPDT & 4-CH SPST relays (PCI-7250)
●
8-CH SPDT & 8-CH SPST relays (PCI-7250 + 1 x PCI-7251)
●
12-CH SPDT & 12-CH SPST relays (PCI-7250 + 2 x PCI-7251)
●
16-CH SPDT & 16-CH SPST relays (PCI-7250 + 3 x PCI-7251)
●
8-CH SPDT (LPCI-7250/LPCIe-7250/cPCI-7252)
●
Non-latching relays
●
Onboard LED indicators for relay status
●
Onboard relay driving circuits
●
Relay output status read back
●
8-CH isolated digital inputs (cPCI-7252/PCI-7250/LPCI-7250/
LPCIe-7250)
●
16-CH isolated digital inputs (PCI-7250 + 1 x PCI-7251)
●
24-CH isolated digital inputs (PCI-7250 + 2 x PCI-7251)
●
32-CH isolated digital inputs (PCI-7250 + 3 x PCI-7251)
●
Onboard low-pass filtering for digital inputs
●
Compact, low-profile size PCB (LPCI-7250/LPCIe-7250)
Introduction
ADLINK's PCI-7250/7251 provide 4-CH SPDT (Form C) & 4-CH
SPST (Form A) relay outputs and 8-CH isolated digital inputs. The
LPCI/LPCIe-7250 and cPCI-7252 provide 8-CH SPDT (Form C) relay
outputs and 8/16-CH isolated digital inputs. The status of each relay
output is represented by an onboard LED. When the relay is in SET
condition, its corresponding LED will turn ON, and on the contrary,
it is OFF. All digital input channels are nonpolarity, optically isolated,
and may be set to use RC filter or not. The devices are suitable for
collecting digital inputs in noisy environments.
The PCI-7251 is an 8-CH relay outputs and 8-CH isolated DI
extension card of the PCI-7250. All the I/O functions of PCI-7251
are the same as those of the PCI-7250. The PCI-7251 has to be
connected with PCI-7250 and the bus interface is controlled by
the PCI-7250. Up to three PCI-7251 cards can be connected to one
PCI-7250, therefore, expanding the PCI-7250's DIO from 8 DIO to
maximum 32 DIO.
Operating Systems
●
Windows 7/Vista/XP/2000/2003 Server
●
Linux
Recommended Software
●
AD-Logger
●
VB.NET/VC.NET/VB/VC++/BCB/Delphi
●
DAQBench
Driver Support
●
DAQPilot for LabVIEW™
●
DAQ-MTLB for MATLAB
®
●
PCIS-DASK for Windows
●
PCIS-DASK/X for Linux
Terminal Boards & Cables
PCI-7250/7251:
●
DIN-37D-01
Terminal Board with One 37-pin D-sub Connector
and DIN-Rail Mounting (Cables are not included.)
●
ACLD-9137-01
General-Purpose Terminal Board with One 37-pin
D-sub Male Connector
●
ACL-10137-1MM
37-pin D-sub male/male cable, 1 M
LPCI-7250/LPCIe-7250/cPCI-7252:
●
DIN-50S-01
Terminal Board with One 50-pin SCSI-II Connector
and DIN-Rail Mounting (Cables are not included.)
●
ACL-10250-1
50-pin SCSI-II cable (mating with AMP-787082-5), 1 M
Ordering Information
●
PCI-7250
8-CH Relay Outputs & 8-CH Isolated DI Card
●
PCI-7251
8-CH Relay Outputs & 8-CH Isolated DI Extension
Card for PCI-7250
●
LPCI-7250
8-CH Relay Outputs & 8-CH Isolated DI Low-Profile
PCI Card
●
LPCIe-7250
8-CH Relay Outputs & 8-CH Isolated DI Low-Profile
PCI Express Card
●
cPCI-7252
8-CH Relay Output & 16-CH Isolated DI Module
PCI-7250 PCI-7250+PCI-7251
cPCI-7252
LPCI-7250 LPCIe-7250